Geochemical ratios in coral reef skeletons could be used as proxies to reconstruct past climatological and environmental records in data-poor regions. Using a 103-year data set(1902 to 2005), the annual variations in ...Geochemical ratios in coral reef skeletons could be used as proxies to reconstruct past climatological and environmental records in data-poor regions. Using a 103-year data set(1902 to 2005), the annual variations in Ba/Ca and Mn/Ca ratios of Porites lutea skeletons at an eastern offshore area of Hainan Island(19?12'28.4''N, 110?37'38.8''E) were analyzed using inductively coupled plasma-optic emission spectrometry(ICP-OES). The analysis results showed that Ba/Ca ratios varied from a minimum of 3.120 μmol mol^(-1) in 1903 to a maximum of 10.064 μmol mol^(-1) in 1944, with an average of 5.256 μmol mol^(-1). Mn/Ca ratios varied from 0.206 to 5.708 μmol mol^(-1) with an annual average of 1.234 μmol mol^(-1), with peak values in 2001, 1964 and 1932, that correlated with strong rainfall events caused by typhoons. Variation in Ba/Ca and Mn/Ca ratios were compared with available river discharge and precipitation records, providing insight into past climatological events. Human activities and their indirect effects could impact the strength of the relationship between Ba/Ca and Mn/Ca ratios and observed precipitation and terrestrial input in the future.展开更多
Pulse-like ground motions are capable of inflicting significant damage to structures. Efficient classification of pulse-like ground motion is of great importance when performing the seismic assessment in near-fault re...Pulse-like ground motions are capable of inflicting significant damage to structures. Efficient classification of pulse-like ground motion is of great importance when performing the seismic assessment in near-fault regions. In this study, a new method for identifying the velocity pulses is proposed, based on different trends of two parameters: the short-time energy and the short-time zero crossing rate of a ground motion record. A new pulse indicator, the relative energy zero ratio(REZR), is defined to qualitatively identify pulse-like features. The threshold for pulse-like ground motions is derived and compared with two other identification methods through statistical analysis. The proposed procedure not only shows good accuracy and efficiency when identifying pulse-like ground motions but also exhibits good performance for classifying records with high-frequency noise and discontinuous pulses. The REZR method does not require a waveform formula to express and fit the potential velocity pulses;it is a purely signal-based classification method. Finally, the proposed procedure is used to evaluate the contribution of pulse-like motions to the total input energy of a seismic record, which dramatically increases the seismic damage potential.展开更多
In the present paper;two models of the input shaft for a Longitudinal Mounted four Speed Automotive Automatic Transmission for the first time were introduced to describe the input shaft critical loads. In the first mo...In the present paper;two models of the input shaft for a Longitudinal Mounted four Speed Automotive Automatic Transmission for the first time were introduced to describe the input shaft critical loads. In the first model;the DC (Direct Clutch) connects two gears together. This gives no change in the set torque (the set output torque equal to the set input torque). In the second model;the ODB (Over Drive Brake) fixes one element of the planetary set. This is resulting, the gear set gives reduction ratio (the set output torque is not equal to the set input torque). So, the transmission input shaft is worked under two different working operating conditions of torque. Also, it is loaded by a two vertical loads which are coming from the turbine and planetary set loads respectively. They are shown that there are three critical combinations of forces (contact force, shear force, and normal force) applied on the input shaft. The critical forces can be possibility exist three types of cracks for the input shaft cross section they are: transverse (torsion stress), longitudinal (bending stress), and vertical (shear stress). The three cracks are studied in this article. The article considers three stress factors: shearing torsion stress, shear stress, and bending stress.展开更多
基金supported by the National Ocean Welfare Research Funds of State Ocean Administration (No.201105012)
文摘Geochemical ratios in coral reef skeletons could be used as proxies to reconstruct past climatological and environmental records in data-poor regions. Using a 103-year data set(1902 to 2005), the annual variations in Ba/Ca and Mn/Ca ratios of Porites lutea skeletons at an eastern offshore area of Hainan Island(19?12'28.4''N, 110?37'38.8''E) were analyzed using inductively coupled plasma-optic emission spectrometry(ICP-OES). The analysis results showed that Ba/Ca ratios varied from a minimum of 3.120 μmol mol^(-1) in 1903 to a maximum of 10.064 μmol mol^(-1) in 1944, with an average of 5.256 μmol mol^(-1). Mn/Ca ratios varied from 0.206 to 5.708 μmol mol^(-1) with an annual average of 1.234 μmol mol^(-1), with peak values in 2001, 1964 and 1932, that correlated with strong rainfall events caused by typhoons. Variation in Ba/Ca and Mn/Ca ratios were compared with available river discharge and precipitation records, providing insight into past climatological events. Human activities and their indirect effects could impact the strength of the relationship between Ba/Ca and Mn/Ca ratios and observed precipitation and terrestrial input in the future.
基金Supported by:National Natural Science Foundation of China under Grant Nos.51378341,51427901 and 51678407National Key Research and Development Program under Grant No.2016YFC0701108
文摘Pulse-like ground motions are capable of inflicting significant damage to structures. Efficient classification of pulse-like ground motion is of great importance when performing the seismic assessment in near-fault regions. In this study, a new method for identifying the velocity pulses is proposed, based on different trends of two parameters: the short-time energy and the short-time zero crossing rate of a ground motion record. A new pulse indicator, the relative energy zero ratio(REZR), is defined to qualitatively identify pulse-like features. The threshold for pulse-like ground motions is derived and compared with two other identification methods through statistical analysis. The proposed procedure not only shows good accuracy and efficiency when identifying pulse-like ground motions but also exhibits good performance for classifying records with high-frequency noise and discontinuous pulses. The REZR method does not require a waveform formula to express and fit the potential velocity pulses;it is a purely signal-based classification method. Finally, the proposed procedure is used to evaluate the contribution of pulse-like motions to the total input energy of a seismic record, which dramatically increases the seismic damage potential.
文摘In the present paper;two models of the input shaft for a Longitudinal Mounted four Speed Automotive Automatic Transmission for the first time were introduced to describe the input shaft critical loads. In the first model;the DC (Direct Clutch) connects two gears together. This gives no change in the set torque (the set output torque equal to the set input torque). In the second model;the ODB (Over Drive Brake) fixes one element of the planetary set. This is resulting, the gear set gives reduction ratio (the set output torque is not equal to the set input torque). So, the transmission input shaft is worked under two different working operating conditions of torque. Also, it is loaded by a two vertical loads which are coming from the turbine and planetary set loads respectively. They are shown that there are three critical combinations of forces (contact force, shear force, and normal force) applied on the input shaft. The critical forces can be possibility exist three types of cracks for the input shaft cross section they are: transverse (torsion stress), longitudinal (bending stress), and vertical (shear stress). The three cracks are studied in this article. The article considers three stress factors: shearing torsion stress, shear stress, and bending stress.