Through quantitative statistics and morphological characterization of ceramic fragments for ceramic composite bulletproof insert plates(CCBIPs),distribution characteristics of ceramic fragments within a specific size ...Through quantitative statistics and morphological characterization of ceramic fragments for ceramic composite bulletproof insert plates(CCBIPs),distribution characteristics of ceramic fragments within a specific size range were analyzed for different Armor Piercing Incendiary(API)and shot times.To quantitatively evaluate the effect of energy absorption for ceramic plates,a model of energy absorption during penetration for CCBIPs was established based on statistics of the size distribution of ceramic fragments(SDCF).Variation in the SDCF and its influence on energy absorption for CCBIPs were investigated.The results indicate that the distribution feature of ceramic fragments in the range of 0.25-2.25 mm is Gaussian distribution.Compared with Type 56 of API(56-API),ceramic fragments formed by 53-API with higher kinetic energy possess more quantity and more concentrated distribution,whose average equivalence size decreases by 6.5%,corresponding to increasing by 83.9%of estimated energy absorption.Besides,the ability of CCBIPs to resist the third shot is significantly weakened,whose estimated energy absorption decreases by 58.8%compared with the first shot.More concentrated distribution and fewer fragments are formed after the third shot,the average equivalence size of ceramic fragments increases by 6.9%,which may attribute to the micro-cracks induced by the previous two shots.展开更多
To prepare a hand-made micropore membrane culture plate insert forco-culture. Methods The plate insert was made using plastic centrifuge tube and micropore membrane.After seeding brain capillary endothelial cells (BCE...To prepare a hand-made micropore membrane culture plate insert forco-culture. Methods The plate insert was made using plastic centrifuge tube and micropore membrane.After seeding brain capillary endothelial cells (BCECs) on it (under the effect ofastrocyte-conditioned medium), the plate insert was assessed by analysis of trans-endothelialelectrical resistance (TEER). Results The plate insert has a stability of at least 15 d underculture condition. TEER increased significantly under co-culture condition from (66.1 +- 13.3)Ωcm^2 to (182.2 +- 6.7) Ωcm^2. Conclusion This micropore membrane culture plate insert can beeasily made, on which BCEC culture can be successfully performed. Moreover, it is adjustable andrecyclable. It follows that the plate insert is a useful tool for co-culture and the relatedresearch fields.展开更多
采用M80弹(7.62 mm×51 mm NATO)分别对常温和高温(55℃)下的防弹插板进行实弹射击试验,以研究高温环境对防弹插板抗弹性能的影响。通过分析试验时防弹插板弹击瞬间凹陷值,同时结合聚氨酯树脂的剥离强度、超高分子量聚乙烯纤维层压...采用M80弹(7.62 mm×51 mm NATO)分别对常温和高温(55℃)下的防弹插板进行实弹射击试验,以研究高温环境对防弹插板抗弹性能的影响。通过分析试验时防弹插板弹击瞬间凹陷值,同时结合聚氨酯树脂的剥离强度、超高分子量聚乙烯纤维层压板剥离强度和弯曲强度的测试结果对高温下抗弹性能变化原因进行了研究。结果表明:高温下防弹插板抗弹性能明显下降,相对于常温下每发弹的弹击瞬间凹陷值增加了2~5 mm。其主要原因是超高分子量聚乙烯纤维层压板在高温下抵抗变形的能力发生明显下降,从而导致防弹插板的弹击瞬间凹陷值增大。展开更多
基金financially supported by the National Key Research&Development Project(2017YFB1103505)the Military Logistics Research Program(XXXC002)of China。
文摘Through quantitative statistics and morphological characterization of ceramic fragments for ceramic composite bulletproof insert plates(CCBIPs),distribution characteristics of ceramic fragments within a specific size range were analyzed for different Armor Piercing Incendiary(API)and shot times.To quantitatively evaluate the effect of energy absorption for ceramic plates,a model of energy absorption during penetration for CCBIPs was established based on statistics of the size distribution of ceramic fragments(SDCF).Variation in the SDCF and its influence on energy absorption for CCBIPs were investigated.The results indicate that the distribution feature of ceramic fragments in the range of 0.25-2.25 mm is Gaussian distribution.Compared with Type 56 of API(56-API),ceramic fragments formed by 53-API with higher kinetic energy possess more quantity and more concentrated distribution,whose average equivalence size decreases by 6.5%,corresponding to increasing by 83.9%of estimated energy absorption.Besides,the ability of CCBIPs to resist the third shot is significantly weakened,whose estimated energy absorption decreases by 58.8%compared with the first shot.More concentrated distribution and fewer fragments are formed after the third shot,the average equivalence size of ceramic fragments increases by 6.9%,which may attribute to the micro-cracks induced by the previous two shots.
基金NationalMedicine 863Project (No .2 0 0 2AA2Z3 43C)
文摘To prepare a hand-made micropore membrane culture plate insert forco-culture. Methods The plate insert was made using plastic centrifuge tube and micropore membrane.After seeding brain capillary endothelial cells (BCECs) on it (under the effect ofastrocyte-conditioned medium), the plate insert was assessed by analysis of trans-endothelialelectrical resistance (TEER). Results The plate insert has a stability of at least 15 d underculture condition. TEER increased significantly under co-culture condition from (66.1 +- 13.3)Ωcm^2 to (182.2 +- 6.7) Ωcm^2. Conclusion This micropore membrane culture plate insert can beeasily made, on which BCEC culture can be successfully performed. Moreover, it is adjustable andrecyclable. It follows that the plate insert is a useful tool for co-culture and the relatedresearch fields.
文摘采用M80弹(7.62 mm×51 mm NATO)分别对常温和高温(55℃)下的防弹插板进行实弹射击试验,以研究高温环境对防弹插板抗弹性能的影响。通过分析试验时防弹插板弹击瞬间凹陷值,同时结合聚氨酯树脂的剥离强度、超高分子量聚乙烯纤维层压板剥离强度和弯曲强度的测试结果对高温下抗弹性能变化原因进行了研究。结果表明:高温下防弹插板抗弹性能明显下降,相对于常温下每发弹的弹击瞬间凹陷值增加了2~5 mm。其主要原因是超高分子量聚乙烯纤维层压板在高温下抵抗变形的能力发生明显下降,从而导致防弹插板的弹击瞬间凹陷值增大。
