On properties of the deterministic turbulence and reproducibility of its instantaneous and statistical characteristics

As known from previous studies, is a post-transitional flow that is turbulent the deterministic turbulence （DeTu） according to the generally accepted statistical characteristics but possesses, meanwhile, a significant degree of determinism, i.e., reproducibility of its instantaneous structure. It is found that the DeTu can occur in those cases when transition is caused by convective instabilities; in boundary layers, in particular. The present paper is devoted to a brief description of history of discovering the DeTu phenomenon, as well as to some recent advance in investigation of instantaneous and statistical properties of such turbulent boundary layer flows.

Rolling element bearing instantaneous rotational frequency estimation based on EMD soft-thresholding denoising and instantaneous fault characteristic frequency

The accurate estimation of the rolling element bearing instantaneous rotational frequency(IRF) is the key capability of the order tracking method based on time-frequency analysis. The rolling element bearing IRF can be accurately estimated according to the instantaneous fault characteristic frequency(IFCF). However, in an environment with a low signal-to-noise ratio(SNR), e.g., an incipient fault or function at a low speed, the signal contains strong background noise that seriously affects the effectiveness of the aforementioned method. An algorithm of signal preprocessing based on empirical mode decomposition(EMD) and wavelet shrinkage was proposed in this work. Compared with EMD denoising by the cross-correlation coefficient and kurtosis(CCK) criterion, the method of EMD soft-thresholding(ST) denoising can ensure the integrity of the signal, improve the SNR, and highlight fault features. The effectiveness of the algorithm for rolling element bearing IRF estimation by EMD ST denoising and the IFCF was validated by both simulated and experimental bearing vibration signals at a low SNR.

INSTANTANEOUS KINEMATIC CHARACTERISTICS OF ASPECIAL 3-UPU PARALLEL MANIPULATOR

The instantaneous kinematics of a special 3-UPU parallel platform manipulator is discussed. First, the instantaneous motions of the 3-UPU manipulator in four kinds of positions and a special manipulator are studied by reciprocal screw theory. Then, the principal screws in one of four positions are obtained. It is shown that the moving platform has five degrees of freedom （DOF） in the initial position or after a translation along the z-axis; In the generic position, the mechanism only has three DOF, moreover the three DOF characteristics are different in different position. The instantaneous kinematic characteristics of alike 3-UPU mechanisms are very different in different position and special structure. The results presented are important to the use of alike 3-UPU parallel manipulator and contribute to the mechanism theory .

Instantaneous mixing characteristics of binary mixtures differing in density in a gas-solid fluidised bed

Characterisations of instantaneous mixing behaviours in fluidised beds with binary mixtures has many challenges.We studied the instantaneous mixing characteristics of binary mixtures in a 2-D quasi gas-solid fluidised bed using a capacitance probe method.This method enabled the quantitative assessment of instantaneous mixing behaviours,including mixing index,rate,and time.Three kinds of binary mixtures of similar size but different density were used for the transient and steady fluidisation experiments in a bubbling fluidised bed.The mixing curves of initially segregated binary mixtures were acquired,and the instantaneous characteristics for the entire process were analysed.An equation was proposed to describe the mixing process and predict the mixing degree over time.By comparing experiments with different working conditions,the effects of superficial gas velocity and density ratio on the mixing in the centre and at the wall of the fluidised bed were addressed.During the stable fluidisation stage,the axial concentration profiles of the mixtures were obtained,and the mechanisms of mixing were discussed.Results showed that the mixing level increased logarithmically with time and eventually reached a relatively stable value.Increasing the superficial gas velocity and reducing the density ratio promoted mixing and reduced mixing time.High superficial gas velocities tended to mix the mixtures well and quickly,regardless of the density ratio of the two components.

Seismic signal analysis based on the dual-tree complex wavelet packet transform

We tried to apply the dual-tree complex wavelet packet transform in seismic signal analysis. The complex wavelet packet transform (CWPT) combine the merits of real wavelet packet transform with that of complex continuous wavelet transform (CCWT). It can not only pick up the phase information of signal, but also produce better ″focal- izing″ function if it matches the phase spectrum of signals analyzed. We here described the dual-tree CWPT algo- rithm, and gave the examples of simulation and actual seismic signals analysis. As shown by our results, the dual-tree CWPT is a very effective method in analyzing seismic signals with non-linear phase.