Exploration of instantaneous frequency for local control assessment in real-time hybrid simulation

Local control parameters such as instantaneous delay and instantaneous amplitude play an essential role in evaluating the performance and maintaining the stability of real-time hybrid simulation(RTHS).However,existing methods have limitations in obtaining this local assessment in either the time domain or frequency domain.In this study,the instantaneous frequency is introduced to determine local control parameters for actuator tracking assessment in a real-time hybrid simulation.Instantaneous properties,including amplitude,delay,frequency and phase,are then calculated based on analytic signals translated from actuator tracking signals through the Hilbert transform.Potential issues are discussed and solutions are proposed for calculation of local control parameters.Numerical simulations are first conducted for sinusoidal and chirp signals with time varying amplitude error and delay to demonstrate the potential of the proposed method.Laboratory tests also are conducted for a predefined random signal as well as the RTHS of a single degree of freedom structure with a self-centering viscous damper to experimentally verify the effectiveness of the proposed use of the instantaneous frequency.Results from the ensuing analysis clearly demonstrate that the instantaneous frequency provides great potential for local control assessment,and the proposed method enables local tracking parameters with good accuracy.

Instantaneous frequency and wave mode identification in a magnetosheath using few spatial points

Observational data such as those obtained from the magnetosheath in the downstream of Earth＇s bow shock have waveforms that differ from those of sinusoidal signals. In practice, they are not even aggregates of sinusoidal signals. Therefore, the frequency decomposition for the data requires technique that will account for the time-varying features of the data that will lead to deduction of physical meaning of the observations. The combination of empirical mode decompo- sition （EMD） and Hilbert transform has been used for extracting the various contributing oscillatory modes （EMDs） and the instantaneous frequency determination （Hilbert transform） of every physically meaningful mode called intrinsic mode func- tion （IMF）. The resulting instantaneous frequencies are used to determine instantaneous wave vectors. The combination of the instantaneous frequencies and wave vectors is useful in the identification of wave modes based on the characteristics of the waves. The results show that EMD-Hilbert can be more reliable than simple Hilbert transform alone.

High Sensitivity Digital Instantaneous Frequency Measurement Receiver for Precise Frequency Analysis

There are numerous applications, such as Radar, that leverage wideband technology. However, the presence of noise introduces certain limitations and challenges. It is crucial to harness wideband technology for applications demanding the rapid and precise transmission of diverse information from one point to another within a short timeframe. The ability to report a signal without tuning within the input bandwidth stands out as one of the advantages of employing a digital wideband receiver. As indicated, a digital wideband receiver plays a pivotal role in achieving high precision and accuracy. The primary distinction between Analog and Digital Instantaneous Frequency Measurement lies in the fact that analog Instantaneous Frequency Measurement (IFM) receivers have traditionally covered extensive input bandwidths, reporting one accurate frequency per short pulse. In the contemporary landscape, digital IFM systems utilize high-sampling-rate Analog-to-Digital Converters (ADC) along with Hilbert transforms to generate two output channels featuring a 90-degree phase shift. This paper explores the improvement of sensitivity in current digital IFM receivers. The optimization efforts target the Hilbert transform and autocorrelations architectures, aiming to refine the system’s ability to report fine frequencies within a noisy wide bandwidth environment, thereby elevating its overall sensitivity.

DEVELOPMENT OF VIRTUAL INSTRUMENT IN CHARACTERISTIC ANALYSIS OF ROTATING MACHINERY BASED ON INSTANTANEOUS FREQUENCY ESTIMATION

Based on the recently quick-developing time-frequency analysis (TFA)technique and virtual instrument (VI) technique, a virtual instrument in characteristic analysis ofrotating machinery is researched and developed successfully. By utilizing instantaneous frequencyestimation (IFE) theoretics of TFA technique, and based on IFE of peak searching on thetime-frequency spectrum, order analysis (OA) functions is put forward and implemented, such as orderspectrum, order spectrum matrix, order tracking, order tracking filtering, and order componentextraction, etc. Unlike the home and abroad existing popular characteristic analyzers, which needkey phasing devices such as shaft encoder, phase-locked loop (PLL), phase-locked multiple frequency,tachometer, etc, to implement constant angle sampling directly or indirectly, whereas thisinstrument only uses the vibration signal of rotating machinery to carry out OA. This instrumentmakes up the shortage of these traditional instruments in analyzing the non-stationary signal ofrun-up and run-down process of rotating machinery. Therefore, it is a great breakthrough for theexisting order analyzers.

Rolling element bearing instantaneous rotational frequency estimation based on EMD soft-thresholding denoising and instantaneous fault characteristic frequency

The accurate estimation of the rolling element bearing instantaneous rotational frequency(IRF) is the key capability of the order tracking method based on time-frequency analysis. The rolling element bearing IRF can be accurately estimated according to the instantaneous fault characteristic frequency(IFCF). However, in an environment with a low signal-to-noise ratio(SNR), e.g., an incipient fault or function at a low speed, the signal contains strong background noise that seriously affects the effectiveness of the aforementioned method. An algorithm of signal preprocessing based on empirical mode decomposition(EMD) and wavelet shrinkage was proposed in this work. Compared with EMD denoising by the cross-correlation coefficient and kurtosis(CCK) criterion, the method of EMD soft-thresholding(ST) denoising can ensure the integrity of the signal, improve the SNR, and highlight fault features. The effectiveness of the algorithm for rolling element bearing IRF estimation by EMD ST denoising and the IFCF was validated by both simulated and experimental bearing vibration signals at a low SNR.

Extension of high-order harmonic cutoff frequency by synthesizing the waveform of a laser field via the optimization of classical electron trajectory in the laser field

We theoretically investigate high-order harmonic generation by employing strong-field approximation （SFA） and present a new approach to the extension of the high-order harmonic cutoff frequency via an exploration of the dependence of high-order harmonic generation on the waveform of laser fields. The dependence is investigated via detailed analysis of the classical trajectories of the ionized electron moving in the continuum in the velocity-position plane. The classical trajectory consists of three sections （Acceleration Away, Deceleration Away, and Acceleration Back）, and their relationship with the electron recollision energy is investigated. The analysis of classical trajectories indicates that, besides the final （Acceleration Back） section, the electron recollision energy also relies on the previous two sections. We simultaneously optimize the waveform in all three sections to increase the electron recollision energy, and an extension of the cutoff frequency up to Ip ＋ 20.26Up is presented with a theoretically synthesized waveform of the laser field.

IMPROVED METHOD FOR HILBERT INSTANTANEOUS FREQUENCY ESTIMATION

In the mechanical fault detection and diagnosis field, it is more and more important to analyze the instantaneous frequency （IF） character of complex vibration signal. The improved IF estimation method is put forward aiming at the shortage of traditional Hilbert transform. It is based on Hilbert transform in wavelet domain. With the help of relationship between the real part and the imaginary part obtained from the complex coefficient of continuous wavelet transform or the analyti- cal signal reconstructed in wavelet packet decomposition, the instantaneous phase function of the subcomponent is extracted. In order to improve the precise of IF estimated out, some means such as Linear regression, adaptive filtering, resampling are applied into the instantaneous phase obtained, then, the central differencing operator is used to get desired IF. Simulation results with synthetic and gearbox fault signals are included to illustrate the proposed method.

A Cell Condition-Sensitive Frequency Segmentation Method Based on the Sub-Band Instantaneous Energy Spectrum of Aluminum Electrolysis Cell Voltage

Cell voltage is a widely used signal that can be measured online from an industrial aluminum electrolysis cell.A variety of parameters for the analysis and control of industrial cells are calculated using the cell voltage.In this paper,the frequency segmentation of cell voltage is used as the basis for designing filters to obtain these parameters.Based on the qualitative analysis of the cell voltage,the sub-band instantaneous energy spectrum(SIEP)is first proposed,which is then used to quantitatively represent the characteristics of the designated frequency bands of the cell voltage under various cell conditions.Ultimately,a cell condition-sensitive frequency segmentation method is given.The proposed frequency segmentation method divides the effective frequency band into the[0,0.001]Hz band of lowfrequency signals and the[0.001,0.050]Hz band of low-frequency noise,and subdivides the lowfrequency noise into the[0.001,0.010]Hz band of metal pad abnormal rolling and the[0.01,0.05]Hz band of sub-low-frequency noise.Compared with the instantaneous energy spectrum based on empirical mode decomposition,the SIEP more finely represents the law of energy change with time in any designated frequency band within the effective frequency band of the cell voltage.The proposed frequency segmentation method is more sensitive to cell condition changes and can obtain more elaborate details of online cell condition information,thus providing a more reliable and accurate online basis for cell condition monitoring and control decisions.

Instantaneous frequency measurement using two parallel I/Q modulators based on optical power monitoring

A scheme for instantaneous frequency measurement(IFM)using two parallel I/Q modulators based on optical power monitoring is proposed.The amplitude comparison function(ACF)can be constructed to establish the relationship between the frequency of radio frequency(RF)signal and the power ratio of two optical signals output by two I/Q modulators.The frequency of RF signal can be derived by measuring the optical power of the optical signals output by two I/Q modulators.The measurement range and measurement error can be adjusted by controlling the delay amount of the electrical delay line.The feasibility of the scheme is verified,and the corresponding measurement range and measurement error of the system under different delay amounts of the electrical delay line are given.Compared with previous IFM schemes,the structure of this scheme is simple.Polarization devices,a photodetector and an electrical power meter are not used,which reduces the impact of the environmental disturbance on the system and the cost of the system.In simulation,the measurement range can reach 0 GHz-24.5 GHz by adjusting the delay amount of the electrical delay lineτ=20 ps.The measurement error of the scheme is better at low frequency,and the measurement error of low frequency 0 GHz-9.6 GHz can reach-0.1 GHz to+0.05 GHz.

Instantaneous Point, Line, and Plane Motions Using a Clifford Algebra

The motions of points, lines, and planes, embedded in a rigid body are expressed in a unified algebraic framework using a Clifford algebra. A Clifford algebra based displacement operator is addressed and its higher derivatives from which the coordinate-independent characteristic numbers with simple geometric meaning are defined. Because of the coordinate independent feature, no tedious coordinate transformation typically found in the conventional instantaneous invariants methods is needed.

Application of formant instantaneous characteristics to speech recognition and speaker identification

This paper proposes a new phase feature derived from the formant instantaneous characteristics for speech recognition （SR） and speaker identification （SI） systems. Using Hilbert transform （HT）, the formant characteristics can be represented by instantaneous frequency （IF） and instantaneous bandwidth, namely formant instantaneous characteristics （FIC）. In order to explore the importance of FIC both in SR and SI, this paper proposes different features from FIC used for SR and SI systems. When combing these new features with conventional parameters, higher identification rate can be achieved than that of using Mel-frequency cepstral coefficients （MFCC） parameters only. The experiment results show that the new features are effective characteristic parameters and can be treated as the compensation of conventional parameters for SR and SI.

Switchable instantaneous frequency measurement by optical power monitoring based on DP-QPSK modulator

We propose and analyze an instantaneous frequency measurement system by using optical power monitoring technique with improved resolution.The primary component adopted in the proposal is a dual-polarization quadrature phase shift keying(DP-QPSK) modulator which is used to modulate the microwave signal that has a designed time delay and phase shifting.The generated optical signal is sent to polarization beam splitter(PBS) in DP-QPSK modulator.Owing to the complementary transmission nature of polarization interference introduced by PBS,the frequency information is converted into the optical power and the relationship between the amplitude comparison function(ACF) and microwave frequency to be measured is established.Thus,the frequency of the microwave signal can be easily measured through monitoring the optical powers of the two output ports of the PBS.Furthermore,by adjusting the direct current(DC) biases of the DP-QPSK modulator instead of changing the electrical delay,the measurement range and resolution can be switched.In this paper,the basic principle of the instantaneous frequency measurement system is derived in detail,and simulation has been performed to investigate the resolution,the measurement range,and the influence of imperfection devices.The proposed scheme is wavelength-independent and its measurement range is switchable,which can avoid the laser wavelength drifting problem and thus greatly increasing the system flexibility.

Instantaneous frequency estimation of multi-component Chirp signals in noisy environments

A classical time-varying signal, the multi-component Chirp signal has been widely used and the ability to estimate its instantaneous frequency （IF） is very useful. But in noisy environments, it is hard to estimate the 1F of a multi-component Chirp signal accurately. Wigner distribution maxima （WDM） are usually utilized for this estimation. But in practice, estimation bias increases when some points deviate from the true IF in high noise environments. This paper presents a new method of multi-component Chirp signal 1F estimation named Wigner Viterbi fit （WVF）, based on Wigner-Ville distribution （WVD） and the Viterbi algorithm. First, we transform the WVD of the Chirp signal into digital image, and apply the Viterbi algorithm to separate the components and estimate their IF. At last, we establish a linear model to fit the estimation results. Theoretical analysis and simulation results prove that this new method has high precision and better performance than WDM in high noise environments, and better suppression of interference and the edge effect. Compared with WDM, WVF can reduce the mean square error （MSE） by 50% when the signal to noise ration （SNR） is in the range of-15dB to -11dB. WVF is an effective and promising 1F estimation method.

Signal Separation and Instantaneous Frequency Estimation Based on Multi-scale Chirplet Sparse Signal Decomposition

An approach based on multi-scale ehirplet sparse signal decomposition is proposed to separate the malti-component polynomial phase signals, and estimate their instantaneous frequencies. In this paper, we have generated a family of multi-scale chirplet functions which provide good local correlations of chirps over shorter time interval. At every decomposition stage, we build the so-called family of chirplets and our idea is to use a structured algorithm which exploits information in the family to chain chirplets together adaptively as to form the polyncmial phase signal component whose correlation with the current residue signal is largest. Simultaueously, the polynomial instantaneous frequency is estimated by connecting the linear frequency of the chirplet functions adopted in the current separation. Simulation experiment demonstrated that this method can separate the camponents of the multi-component polynamial phase signals effectively even in the low signal-to-noise ratio condition, and estimate its instantaneous frequency accurately.

Efficacy of Hilbert-Huang Transform (HHT) in the Analysis of Instantaneous Low Frequency Waves of Magnetosheath

The flow of supersonic plasma is accompanied by a highly thermalized region called the Magnetoshealth found after the bow shock. Enclosed within this region are different wave modes associated with classes of boundaries which have been determined by different methods. The efficacy of Hilbert-Huang transform (HHT) is based on the conditionality of allowing for the local analysis of frequencies, which presents the physical meaning of the original signal at that instant. The observed data have been taken from Cluster II Fluxgate Magnetometer (FGM) instrument that provides advantage for the analysis in three dimensions. The result compares favourably with instantaneous frequencies computed using simple Hilbert transform (SHT) with electric field measurements of Cluster II mission already carried out in literatures. The result of this study has shown that HHT provides the best applicability in the magnetosheath data analysis than the wavelet and Fast Fourier Transform (FFT). The application of HHT based on its advantages over other methods is viewed to be very critical in the analysis of multi-frequency signals where different frequencies could be determined distinctively at a point.

Efficacy of Hilbert-Huang Transform (HHT) in the Analysis of Instantaneous Low Frequency Waves of Magnetosheath

The flow of supersonic plasma is accompanied by a highly thermalized region called the Magnetoshealth found after the bow shock. Enclosed within this region are different wave modes associated with classes of boundaries which have been determined by different methods. The efficacy of Hilbert-Huang transform (HHT) is based on the conditionality of allowing for the local analysis of frequencies, which presents the physical meaning of the original signal at that instant. The observed data have been taken from Cluster II Fluxgate Magnetometer (FGM) instrument that provides advantage for the analysis in three dimensions. The result compares favourably with instantaneous frequencies computed using simple Hilbert transform (SHT) with electric field measurements of Cluster II mission already carried out in literatures. The result of this study has shown that HHT provides the best applicability in the magnetosheath data analysis than the wavelet and Fast Fourier Transform (FFT). The application of HHT based on its advantages over other methods is viewed to be very critical in the analysis of multi-frequency signals where different frequencies could be determined distinctively at a point.

基于IFM的交叠线性调频信号参数估计

线性调频信号是脉冲压缩雷达中一种重要的脉冲压缩雷达信号,但当前的瞬时测频系统无法对其检测,更无法检测交叠信号。以瞬时测频系统为基础,分析了单线性调频信号和交叠线性调频经过瞬时测频系统的理论输出,据此提出了一种改进IFM系统的思路和解算交叠线性调频信号方法。新方法用模数转换器(ADC)对前沿未交叠的I、Q输出值进行量化和连续时间采样,得到一个信号离散频率值,应用LMS算法估计出其初始频率和调频斜率。以此为基础,根据交叠部分的I、Q输出值,估计出另一个信号参数。由Matlab/Simulink仿真验证可知,新方法能够估计两交叠线性调频信号的参数。

瞬时测频(IFM)接收机的一种干扰方法

频率是雷达截获接收机进行雷达信号分选的一个主要参数。分析了瞬时测频接收机的瞬时测频原理,根据瞬时测频接收机一次只能处理一个信号的特点,提出了采用多个重叠信号干扰瞬时测频接收机正确测频的方法,并对重叠信号进行了分析。

数字信道化IFM接收技术研究

针对宽带数字信号侦察问题,首先推导了一种实信号数字信道化接收机的高效结构,便于实现高倍抽取,接着将信号检测与瞬时测频技术应用于该结构中,推导了将瞬时测频用于此结构时的条件。针对跨信道信号的处理问题,提出了一种改进的滤波器组排列方法,通过滤波器组通带重叠的方式来处理跨信道信号,该方法在信号带宽较窄时能较好地处理跨信道信号。仿真结果表明,所设计的系统具有良好的性能,对跨信道信号有较好的处理效果。