Measurement of solidprecipitation and blowing snow: current status and challenges

In this article,the relevant instruments and techniques for measuring solid precipitation and blowing snow are reviewed,with a focus on the in situ instrument measurements.Moreover,a literature review and specific observation activities for solid precipitation are provided,the working principles of several instruments are introduced,and the advantages and disadvantages,measurement performance,and specific application scenarios of the instruments are evaluated.Currently,there are numerous solid precipitation measurement instruments available,and the standardization and sustainability of these measurements also need to be considered.The purpose of the review is not to be exhaustive but to provide readers with information on the current status of the development of relevant technologies and the prospects for their application in the polar regions.

Integrated On-line Instrumentation System of Magnetic Properties Measurement

A portable microcomputer-controlled inspection system has been developed for detection of magnetic properties of soft magnetic materials. It incorporates custom designed software for control of the magnetic field during operation such as demagnetization, field sweeping, and for data logging and analysis. Results are recorded using a 12-bit analog to digital converter and are then stored on disk. The magnetic hysteresis loop and Barkhausen noise data can be converted into important magnetic parameters: coecivity, remanence, and hysteresis loss, Barkhausen amplitude, and Barkhausen noise energy. This system incorporated with the magnetostriction, and magnetoacoustic emission, is then related with the nondestructive detection of material degradation.

Magnetic field regression using artificial neural networks for cold atom experiments

Accurately measuring magnetic fields is essential for magnetic-field sensitive experiments in areas like atomic,molecular,and optical physics,condensed matter experiments,and other areas.However,since many experiments are often conducted in an isolated environment that is inaccessible to experimentalists,it can be challenging to accurately determine the magnetic field at the target location.Here,we propose an efficient method for detecting magnetic fields with the assistance of an artificial neural network(NN).Instead of measuring the magnetic field directly at the desired location,we detect fields at several surrounding positions,and a trained NN can accurately predict the magnetic field at the target location.After training,we achieve a below 0.3%relative prediction error of magnetic field magnitude at the center of the vacuum chamber,and successfully apply this method to our erbium quantum gas apparatus for accurate calibration of magnetic field and long-term monitoring of environmental stray magnetic field.The demonstrated approach significantly simplifies the process of determining magnetic fields in isolated environments and can be applied to various research fields across a wide range of magnetic field magnitudes.

INTELLIGENT VIRTUAL CONTROL:MEASURING INSTRUMENT FROM WHOLE TO PART

A new concept called intelligent virtual control (IVC), which can be drivenby measuring functions, is put forward. This small 'intelligent measurement instrument unit (IMIU)',carrying with functions of instrument, consists of different types of intelligent virtualinstrument (IVI) through individual components together as building blocks and can be displayeddirectly on the computer screen. This is a new concept of measuring instrument, and also animportant breakthrough after virtual instrument (VI). Virtual control makes instrument resourcesobtain further exploitation. It brings about a fundamental change to the design and manufacturingmode. The instrument therefore, can not only be produced directly inside a PC, but the product isinvolved in the 'green product' system. So far, all the present digital instruments will grow to bereplaced by intelligent control with green characteristics.

Nuclear Magnetic Resonance Measurements of Original Water Saturation and Mobile Water Saturation in Low Permeability Sandstone Gas

We use nuclear magnetic resonance （NMR） and centrifugation to measure the original water saturation and mobile water saturation of cores from the Xujiahe low permeability sandstone gas reservoir, and compare the NMR results with the corresponding field data. It is shown that the NMR water saturation after 300psi centrifugation effectively represents the original water saturation measured by weighing fresh cores. There is a good correlation between mobile water saturation and the water production performance of the corresponding gas wells. The critical mobile water saturation whether reservoir produces water of the Xujiahe low permeability sandstone gas is 6%. The higher the mobile water saturation, the greater the water production rate of gas well. This indicates that well＇s water production performance can be forecasted by mobile water saturation of cores.

Self-heating Probe Instrument and Method for Measuring High Temperature Melting Volume Change Rate of Material

The castings defects are affected by the melting volume change rate of material. The change rate has an important effect on running safety of the high temperature thermal storage chamber, too. But the characteristics of existing measuring installations are complex structure, troublesome operation and low precision. In order to measure the melting volume change rate of material accurately and conveniently, a self-designed measuring instrument, self-heating probe instrument, and measuring method are described. Temperature in heating cavity is controlled by PID temperature controller; melting volume change rate υ and molten density are calculated based on the melt volume which is measured by the instrument. Positive and negative υ represent expansion and shrinkage of the sample volume after melting, respectively. Taking eutectic LiF＋CaF2 for example, its melting volume change rate and melting density at 1 123 K are -20.6% and 2 651 kg/m–3 measured by this instrument, which is only 0.71% smaller than literature value. Density and melting volume change rate of industry pure aluminum at 973 K and analysis pure NaCl at 1 123 K are detected by the instrument too. The measure results are agreed with report values. Measuring error sources are analyzed and several improving measures are proposed. In theory, the measuring errors of the change rate and molten density which are measured by the self-designed instrument is nearly 1/20-1/50 of that measured by the refitted mandril thermal expansion instrument. The self-designed instrument and method have the advantages of simple structure, being easy to operate, extensive applicability for material, relatively high accuracy, and most importantly, temperature and sample vapor pressure have little effect on the measurement accuracy. The presented instrument and method solve the problems of complicated structure and procedures, and large measuring errors for the samples with high vapor pressure by existing installations.

Automatic Recognition Method for Optical Measuring Instruments Based on Machine Vision

Based on a comprehensive study of various algorithms, the automatic recognition of traditional ocular optical measuring instruments is realized. Taking a universal tools microscope(UTM) lens view image as an example, a 2-layer automatic recognition model for data reading is established after adopting a series of pre-processing algorithms. This model is an optimal combination of the correlation-based template matching method and a concurrent back propagation(BP) neural network. Multiple complementary feature extraction is used in generating the eigenvectors of the concurrent network. In order to improve fault-tolerance capacity, rotation invariant features based on Zernike moments are extracted from digit characters and a 4-dimensional group of the outline features is also obtained. Moreover, the operating time and reading accuracy can be adjusted dy-namically by setting the threshold value. The experimental result indicates that the newly developed algorithm has optimal recognition precision and working speed. The average reading ratio can achieve 97.23%. The recognition method can automatically obtain the results of optical measuring instruments rapidly and stably without modifying their original structure, which meets the application requirements.

Measurement of Electron-Drift Velocity in Ar＋CH4 Mixtures Using Double-Grid Method

Based on analyzing the induced signals from the double-grids of an ionization chamber, the electron-drift time between the two grids is determined and the electron-drift velocity is derived. A waveform digitizer is employed to record pulses from the two grids of the ionization chamber. The electron-drift velocity is measured as a function of the reduced electric field E/p for eight different ratios of Ar＋CH4 mixtures. By analyzing the experimental data of this study, self-consistency of experimental data is achieved, and formulae for calculating electron-drift velocity in any ratio of Ar＋CH4 mixtures are obtained.

Effect of Station Improvement Measures on Customer Satisfaction

Stations are often regarded as change engines--places where passengers have to change as quickly and efficiently as possible from one mode of transport to another. Underpinned by research, NS （Netherlands Railways） currently takes the view that stations should be transformed into dynamic urban portals that not only facilitate a speedy transfer but also make the stay at the station more enjoyable. To discover which aspects the customer perceives as important, NS developed a research method that is based on enviromnental psychology and with which the impact of passengers＇ waiting and station experience can be measured. This article addresses the measures taken, the method of measurement and the measurement results. Examples of such measures are： experimenting with colour, light, music, infotainment and increasing and repositioning the shopping facilities. Our studies not only showed an increase in the score for the general evaluation of a test station （Leiden Central Station） with one full point but also significant positive effects on various aspects of waiting and experience.

Research on Solar Simulation System for Test of Solar Radiation Measuring Instrument

Since traditional solar simulators are mainly applied to spacecraft and photovoltaic industry,they are not suitable for solar radiation measuring instrument test. Therefore,a deep research is carried out on solar simulators to test of solar radiation measuring instrument,so that obtain the requirements of performance test of solar radiation measuring instrument. With a combination of the requirements for national regulations of metrological verification and performance test of pyranometer and pyrheliometer,it lays emphasis on the research of design methods for improving radiation uniformity and stability of solar simulators; it also focuses on design methods of multidimensional detection workbench,which achieves different detection of solar radiation. After practical test,solar irradiation is within Φ60 mm; irradiation non-uniformity is better than ±0.8%; instability is better than ±0.72%;rotating angle precision is better than 0.09°. Then,solar simulator is used to carry out pyranometer sensitivity test,pyranometer directional response test,pyranometer tilt response test and non-linearity test for radiation instruments. Test results showthat the solar simulator meets the testing requirements of solar radiation measuring instruments.

Velocity Measurement Based on Laser Doppler Effect

A novel method for velocity measurement is presented. In this scheme, a parallel-linear-polarization dual- frequency laser is incident on the target and senses the target velocity with both the frequencies, which can increase the maximum measurable velocity significantly. The theoretical analysis and verification experiment of the novel method are presented, which show that high-velocity measurement can be achieved with high precision using this method.

Progress in AMS Measurement of 182Hf at CIAE

Accelerator mass spectrometry （AMS） is one of the most promising methods to detect minute amounts of 182Hf. However, the sensitivity of 5×10^-11 for ^182Hf/180Hf obtained previously by the AMS method at China Institute of Atomic Energy （CIAE） cannot meet the requirement of some applications. We present some new improvements of measurement method for AMS measurement of 182Hf at the CIAE HI？13 tandem accelerator system. As a result, a sensitivity of 1.0×10^-11 for 182Hf/180Hf is achieved.

Time-Resolved Measurement of Radiatively Heated Iron 2p-3d Transmission Spectra

An experimental measurement of radiatively heated iron plasma transmission spectra was performed on Shenguang II laser facility. In the measurement, the self？emission spectrum, the backlighting spectrum, and the absorption spectrum were imaged with a flat filed grating and recorded on a gated micro channel plate detector to obtain the time-resolved transmission spectra in the range 10-20 ？ （approximately 0.6-1.3 keV）. Experimental results are compared with the calculation results of an unsolved transition array （UTA） code. The time-dependent relative shift in the positions of the 2p-3d transmission array is interpreted in terms of the plasma temperature variations.

Application of a Soil Nutrient Measuring Instrument in Vegetable Seedling Substrate

[Objective] The aim was to find an efficient method to measure available nitrogen, phosphorus and potassium content in vegetable seedling substrate. [ Method] The suitable dosage of leaching agent, ratio of the substrate to water and leaching time for the detection of nutrient contents in the substrate by a soil nutrient measuring instrument were discussed firstly, and then the results of nutrient contents measured by the soil nutrient measuring instrument were compared with that by conventional approaches. [ Result] In compadson with the conventional methods, the av- erage content of available nitrogen measured by the soil nutrient measuring instrument was slightly higher, while the average content of available phosphorus measured by the instrument was lower; the average content of available potassium measured by the instrument was close to that by the conventional method. [ Conclusion] This study could provide us a new method to detect available nitrogen, phosphorus and potassium content in seedling substrate efficiently.

Implementation of Vibrancy Awaking Pressure Measuring Instrument for Single Hydraulic Prop

An instnmaent awakened by means of vibration for single hydraulic prop pressame measuring is described in this paper. The principle and implementation of this metlmd are introduced in detail. The instnznent uses the hgh-perftmnance single chip C8051F310 as its MCU and vibration sensor as its awaking device. It has such advantages as small vohane and low power consmnption, and moreover it could resolve the problem that traditional pressure measming instrument on single hydraulic prop can＇t be used in coal mine.

Gold Measuring Instrument

The China Energy Science Research Institute has developed an instrument to check the colour of gold, which can quickly measure the content of gold and silver ingots, chains, ornaments and placer gold and does not harm the objects. It is an ideal apparatus for gold and silver shops and processing departments. Composed of a main machine, a computer and a printer, the instrument shows at once the content through graphs and a print-out of figures. It is easy to operate and highly accurate.

A novel wide-range precision instrument for measuring three-dimensional surface topography

We developed a measuring instrument that had wide range, high precision, small measuring touch force. The instrument for three-dimensional (3D) surface topography measurement was composed of a high precision displacement sensor based on the Michelson interference principle, a 3D platform based on vertical scanning, a measuring and control circuit, and an industrial control computer. It was a closed loop control system, which changed the traditional moving stylus scanning style into a moving platform scanning style. When the workpiece was measured, the lever of the displacement sensor returned to the balanced position in every sample interval according to the zero offset of the displacement sensor. The non-linear error caused by the rotation of the lever was, therefore, very small even if the measuring range was wide. The instrument can measure the roughness and the profile size of a curved surface.

National Verification Regulations and Calibration Specifications of Measuring Instruments of P.R.China in 2010(2010 No.131)

General Administration of Quality Supervision,Inspection and Quarantine of P.R.China has approved the following 8 national measuring verification regulations in 2010 and publicize now.