Trajectory tracking guidance of interceptor via prescribed performance integral sliding mode with neural network disturbance observer

This paper investigates interception missiles’trajectory tracking guidance problem under wind field and external disturbances in the boost phase.Indeed,the velocity control in such trajectory tracking guidance systems of missiles is challenging.As our contribution,the velocity control channel is designed to deal with the intractable velocity problem and improve tracking accuracy.The global prescribed performance function,which guarantees the tracking error within the set range and the global convergence of the tracking guidance system,is first proposed based on the traditional PPF.Then,a tracking guidance strategy is derived using the integral sliding mode control techniques to make the sliding manifold and tracking errors converge to zero and avoid singularities.Meanwhile,an improved switching control law is introduced into the designed tracking guidance algorithm to deal with the chattering problem.A back propagation neural network(BPNN)extended state observer(BPNNESO)is employed in the inner loop to identify disturbances.The obtained results indicate that the proposed tracking guidance approach achieves the trajectory tracking guidance objective without and with disturbances and outperforms the existing tracking guidance schemes with the lowest tracking errors,convergence times,and overshoots.

Design of integral sliding mode guidance law based on disturbance observer

With the increasing precision of guidance,the impact of autopilot dynamic characteristics and target maneuvering abilities on precision guidance is becoming more and more significant.In order to reduce or even eliminate the autopilot dynamic operation and the target maneuvering influence,this paper suggests a guidance system model involving a novel integral sliding mode guidance law(ISMGL).The method utilizes the dynamic characteristics and the impact angle,combined with a sliding mode surface scheme that includes the desired line-ofsight angle,line-of-sight angular rate,and second-order differential of the angular line-of-sight.At the same time,the evaluation scenario considere the target maneuvering in the system as the external disturbance,and the non-homogeneous disturbance observer estimate the target maneuvering as a compensation of the guidance command.The proposed system’s stability is proven based on the Lyapunov stability criterion.The simulations reveale that ISMGL effectively intercepted large maneuvering targets and present a smaller miss-distance compared with traditional linear sliding mode guidance laws and trajectory shaping guidance laws.Furthermore,ISMGL has a more accurate impact angle and fast convergence speed.

An impact angle constraint integral sliding mode guidance law for maneuvering targets interception

An integral sliding mode guidance law(ISMGL)combined with the advantages of the integral sliding mode control(SMC)method is designed to address maneuvering target interception problems with impact angle constraints.The relative motion equation of the missile and the target considering the impact angle constraint is established in the longitudinal plane,and an integral sliding mode surface is constructed.The proposed guidance law resolves the existence of a steady-state error problem in the traditional SMC.Such a guidance law ensures that the missile hits the target with an ideal impact angle in finite time and the missile is kept highly robust throughout the interception process.By adopting the dynamic surface control method,the ISMGL is designed considering the impact angle constraints and the autopilot dynamic characteristics.According to the Lyapunov stability theorem,all states of the closed-loop system are finally proven to be uniformly bounded.Simulation results are compared with the general sliding mode guidance law and the trajectory shaping guidance law,and the findings verify the effectiveness and superiority of the ISMGL.

Fixed time integral sliding mode controller and its application to the suppression of chaotic oscillation in power system

Chattering phenomenon and singularity are still the main problems that hinder the practical application of sliding mode control. In this paper, a fixed time integral sliding mode controller is designed based on fixed time stability theory, which ensures precise convergence of the state variables of controlled system, and overcomes the drawback of convergence time growing unboundedly as the initial value increases in finite time controller. It makes the controlled system converge to the control objective within a fixed time bounded by a constant as the initial value grows, and convergence time can be changed by adjusting parameters of controllers properly. Compared with other fixed time controllers, the fixed time integral sliding mode controller proposed in this paper achieves chattering-free control, and integral expression is used to avoid singularity generated by derivation. Finally, the controller is used to stabilize four-order chaotic power system. The results demonstrate that the controller realizes the non-singular chattering-free control of chaotic oscillation in the power system and guarantees the fixed time convergence of state variables, which shows its higher superiority than other finite time controllers.

Integral sliding mode control of time-delay systems with mismatching uncertainties

A linear matrix inequality （LMI）-based sliding surface design method for integral sliding mode control of uncertain time- delay systems with mismatching uncertainties is proposed. The uncertain time-delay system under consideration may have mis- matching norm bounded uncertainties in the state matrix as well as the input matrix, A sufficient condition for the existence of a sliding surface is given to guarantee asymptotic stability of the full order slJdJng mode dynamics. An LMI characterization of the slid- ing surface is given, together with an integral sliding mode control law guaranteeing the existence of a sliding mode from the initial time. Finally, a simulation is given to show the effectiveness of the proposed method.

Integral sliding mode control for a class of nonlinear neutral systems with time-varying delays

This paper focuses on sliding mode control problems for a class of nonlinear neutral systems with time-varying delays. An integral sliding surface is firstly constructed. Then it finds a useful criteria to guarantee the global stability for the nonlinear neutral systems with time-varying delays in the specified switching surface, whose condition is formulated as linear matrix inequality. The synthesized sliding mode controller guarantees the reachability of the specified sliding surface. Finally, a numerical simulation validates the effectiveness and feas.ibility of the proposed technique.

Robust integral sliding mode control for uncertain systems with multiple time delays

This paper proposes a robust integral sliding mode (RISM) manifold and the corresponding stabilization control law for uncertain systems with multiple time-varying time delays based on the techniques of linear matrix inequalities (LMI). The sufficient condition for the existence of the RISM manifold is given in terms of LMI, and then, the sliding mode control (SMC) law that can keep the system state on the RISM manifold from the initial time moment is developed. The efficiency and feasibility of the results are illustrated by a numerical example.

Enhancement of Solar PV Panel Efficiency Using Double Integral Sliding Mode MPPT Control

The extraction of maximum power from the solar panels,using the sliding mode control scheme,becomes popular for partial weather atmospheric conditions due to its effective dynamic duty cycle ratio.However,the sliding mode control scheme was sophisticated with single integral and double integral sliding mode control scheme,which offer enhanced maximum power extraction and support enhanced solar panel efficiency in partial weather conditions.The operation of the sliding mode control scheme depends on the selection of a sliding surface selection based on the atmospheric weather condition,which enables the effective sliding duty cycle ratio operation for the DC/DC boost converter.The duty cycle ratio of the sliding mode control resembles the usual dynamic behavior to achieve enhanced efficiency compared to the various maximum power point tracking(MPPT)schemes.The major limitation of the sliding mode control scheme is to achieve the steady state voltage error of the solar panel in minimum settling time duration.The single integral sliding mode control scheme achieves the expected steady state voltage error limit but fails to achieve minimum settling time duration.Hence,the single integral sliding mode control is extended to a double integral sliding mode control scheme to achieve both steady state voltage error limits within the minimum settling time duration.This double integral sliding mode control scheme allows us to obtain the higher sliding surface duty cycle ratio which acts as the input signal to the boost converter.This activates the enhanced stable and reliable system operation,and nullifies the lacuna of maximum solar panel efficiency under partial weather conditions.Hence,this paper aims to present the design and performance operation of the double integral sliding mode(DISM)MPPT control scheme.To validate the performance analysis of the proposed DISM MPPT control scheme,the MATLAB/Simulink model is designed and verified.Also,the performance analysis of the proposed DISM MPPT control scheme is compared with the sliding mode controller(SMC)scheme and single integral sliding mode controller(SiSMC)scheme.The performance analysis of the proposed double integral sliding mode controller(DISMC)scheme attains 99.10%of efficiency and a very less setting time of 0.035s when compared to other existingmethods.

Variable speed wind turbine for maximum power capture using adaptive fuzzy integral sliding mode control

This paper presents a nonlinear control approach to variable speed wind turbine(VSWT)with a wind speed estimator.The dynamics of the wind turbine(WT)is derived from single mass model.In this work,a modified Newton Raphson estimator has been considered for exact estimation of effective wind speed.The main objective of this work is to extract maximum energy from the wind at below rated wind speed while reducing drive train oscillation.In order to achieve the above objectives,VSWT should operate close to the optimal power coefficient.The generator torque is considered as the control input to achieve maximum energy capture.From the literature,it is clear that existing linear and nonlinear control techniques suffer from poor tracking of WT dynamics,increased power loss and complex control law.In addition,they are not robust with respect to input disturbances.In order to overcome the above drawbacks,adaptive fuzzy integral sliding mode control(AFISMC)is proposed for VSWT control.The proposed controller is tested with different types of disturbances and compared with other nonlinear controllers such as sliding mode control and integral sliding mode control.The result shows the better performance of AFISMC and its robustness to input disturbances.In this paper,the discontinuity in integral sliding mode controller is smoothed by using hyperbolic tangent function,and the sliding gain is adapted using a fuzzy technique which makes the controller more robust.

Three-dimensional guidance law based on adaptive integral sliding mode control

For the terminal guidance problem of missiles intercepting maneuvering targets in the three-dimensional space, the design of guidance laws for non-decoupling three-dimensional engage- ment geometry is studied. Firstly, by introducing a finite time integral sliding mode manifold, a novel guidance law based on the integral sliding mode control is presented with the target acceler- ation as a known bounded external disturbance. Then, an improved adaptive guidance law based on the integral sliding mode control without the information of the upper bound on the target accel- eration is developed, where the upper bound of the target acceleration is estimated online by a designed adaptive law. The both presented guidance laws can make sure that the elevation angular rate of the line-of-sight and the azimuth angular rate of the line-of-sight converge to zero in finite time. In the end, the results of the guidance performance for the proposed guidance laws are pre- sented by numerical simulations. Although the designed guidance laws are developed for the con- stant speed missiles, the simulation results for the time-varying speed missiles are also shown to further confirm the designed guidance laws.

Intelligent fractional-order integral sliding mode control for PMSM based on an improved cascade observer

In this paper,an intelligent fractional-order integral sliding mode control(FOISMC)strategy based on an improved cascade observer is proposed.First,an FOISMC strategy is designed to control a permanent magnet synchronous motor.It has good tracking performance,is strongly robust,and can effectively reduce chattering.The proposed FOISMC strategy associates strong points of the integral action(which can eliminate steady-state tracking errors)and the fractional calculus(which is flexible).Second,an improved cascade observer is proposed to detect the rotor information with a smaller observation error.The proposed observer combines an adaptive sliding mode observer and an extended high-gain observer.In addition,an improved variable-speed grey wolf optimization algorithm is designed to enhance controller parameters.The effectiveness of the strategy is tested using simulations and an experiment involving model uncertainty and external disturbance.

A Position Synchronization Controller for Co-ordinated Links(COOL)Dual Robot Arm Based on Integral Sliding Mode:Design and Experimental Validation

In this study,a simple position synchronization control algorithm based on an integral sliding mode is developed for dualarm robotic manipulator systems.A first-order sliding surface is designed using cross-coupling error in order to ensure position synchronization of dual-arm manipulators.The design objective of the proposed controller is to ensure stability as well as to synchronize the movement of both arms while maintaining the trajectory as desired.The integral sliding mode eliminates the reaching phase and guarantees robustness throughout the whole operating period.Additionally,a low pass filter is used to smoothen the discontinuous element and minimize unwanted chattering.Lyapunov stability theory is utilized to prove the asymptotic stability of the controlled system.Simulation studies are performed to validate the proposed controller′s effectiveness.Also,to investigate the possibility of realizing the proposed dynamic control method in practical applications,experiments are conducted on a 14DoF coordinated links(COOL)dual-arm robotic manipulator system.Experimental evidence indicates adequate efficiency in trajectory tracking and guarantees robustness in the presence of parametric uncertainty and external disturbance.

Integral sliding mode based optimal composite nonlinear feedback control for a class of systems

This paper presents an optimization method of designing the integral sliding mode （ISM） based composite nonlinear feedback （CNF） controller for a class of low order linear systems with input saturation. The optimal CNF control is first designed as a nominal control to yield high tracking speed and low overshoot. The selection of all the tuning parameters for the CNF control law is turned into a minimization problem and solved automatically by particle swarm optimization （PSO） algorithm. Subsequently, the discontinuous control law is introduced to reject matched disturbances. Then, the optimal ISM-CNF control law is achieved as the sum of the optimal CNF control law and the discontinuous control law. The effectiveness of the optimal ISM-CNF controller is verified by comparing with a step by step designed one. High tracking performance is achieved by applying the optimal ISM-CNF controller to the tracking control of the micromirror.

Controlling chaos based on a novel intelligent integral terminal sliding mode control in a rod-type plasma torch

An integral terminal sliding mode controller is proposed in order to control chaos in a rod-type plasma torch system.In this method, a new sliding surface is defined based on a combination of the conventional sliding surface in terminal sliding mode control and a nonlinear function of the integral of the system states. It is assumed that the dynamics of a chaotic system are unknown and also the system is exposed to disturbance and unstructured uncertainty. To achieve a chattering-free and high-speed response for such an unknown system, an adaptive neuro-fuzzy inference system is utilized in the next step to approximate the unknown part of the nonlinear dynamics. Then, the proposed integral terminal sliding mode controller stabilizes the approximated system based on Lyapunov＇s stability theory. In addition, a Bee algorithm is used to select the coefficients of integral terminal sliding mode controller to improve the performance of the proposed method. Simulation results demonstrate the improvement in the response speed, chattering rejection, transient response,and robustness against uncertainties.

High-order sliding mode attitude controller design for reentry flight

A novel high-order sliding mode control strategy is proposed for the attitude control problem of reentry vehicles in the presence of parametric uncertainties and external disturbances, which results in the robust and accurate tracking of the aerodynamic angle commands with the finite time convergence. The proposed control strategy is developed on the basis of integral sliding mode philosophy, which combines conventional sliding mode control and a linear quadratic regulator over a finite time interval with a free-final-state and allows the finite-time establishment of a high-order sliding mode. Firstly, a second-order sliding mode attitude controller is designed in the proposed high-order siding mode control framework. Then, to address the control chattering problem, a virtual control is introduced in the control design and hence a third-order sliding mode attitude controller is developed, leading to the chattering reduction as well as the control accuracy improvement. Finally, simulation examples are given to illustrate the effectiveness of the theoretical results.

Fast self-adapting high-order sliding mode control for a class of uncertain nonlinear systems

A fast self-adapting high-order sliding mode(FSHOSM)controller is designed for a class of nonlinear systems with unknown uncertainties.As for uncertainty-free nonlinear system,a new switching condition is introduced into the standard geometric homogeneity.Different from the existing geometric homogeneity method,both state variables and their derivatives are considered to bring a reasonable effective switching condition.As a result,a faster convergence rate of state variables is achieved.Furthermore,based on the integral sliding mode(ISM)and above geometric homogeneity,a self-adapting high-order sliding mode(HOSM)control law is proposed for a class of nonlinear systems with uncertainties.The resulting controller allows the closed-loop system to conduct with the expected properties of strong robustness and fast convergence.Stable analysis of the nonlinear system is also proved based on the Lyapunov approach.The effectiveness of the resulting controller is verified by several simulation results.

Nonlinear Derivative and Integral Sliding Control for Tracked Vehicle Steering with Hydrostatic Drive

In the steering process of tracked vehicle with hydrostatic drive,the motion and resistance states of the vehicle are always of uncertain and nonlinear characteristics,and these states may undergoe large-scale changes.Therefore,it is significant to enhance the steering stability of tracked vehicle with hydrostatic drive to meet the need of future battlefield.In this paper,a sliding mode control algorithm is proposed and applied to achieve desired yaw rates.The speed controller and the yaw rate controller are designed through the kinematics and dynamics analysis.In addition,the nonlinear derivative and integral sliding mode control algorithm is designed,which is supposed to efficiently reduce the integration saturation and the disturbances from the unsmooth road surfaces through a conditional integrator approach.Moreover,it improves the response speed of the system and reduces the chattering by the derivative controller.The hydrostatic tracked vehicle module is modeled with a multi-body dynamic software RecurDyn and the steering control strategy module is modeled by MATLAB/Simulink.The co-simulation results of the whole model show that the control strategy can improve the vehicle steering response speed and also ensure a smooth control output with small chattering and strong robustness.

Robust sliding mode control with ESO for dual-control missile

This paper proposes a novel composite dual-control bycombing the integral sliding mode control （ISMC） method basedon the finite time convergence theory with extended state observer（ESO） for a tracking problem of a missile with tail fins and reactionjetcontrol system （RCS）. First, the ISMC method based on finitetime convergence is utilized to design the control law of tail fins andthe pulse control of RCS for the dual-control system, ensuring thesystem with rapid response and high accuracy of tracking. Then,ESO is employed for the estimation of aerodynamic disturbancesinfluenced by the airflow of thruster jets. With the characteristicof high accuracy estimation of ESO, the chattering free trackingperformance of the attack angle command and the robustnessof the control law are achieved. Meanwhile, the stability of thedual-control system is analyzed based on finite time convergencestability theorem and Lyapunov’s theorem. Finally, numerical simulationsdemonstrate the effectiveness of the proposed design.

A Sliding Mode Approach to Enhance the Power Quality of Wind Turbines Under Unbalanced Voltage Conditions

An integral terminal sliding mode-based control design is proposed in this paper to enhance the power quality of wind turbines under unbalanced voltage conditions. The design combines the robustness, fast response, and high quality transient characteristics of the integral terminal sliding mode control with the estimation properties of disturbance observers. The controller gains were auto-tuned using a fuzzy logic approach.The effectiveness of the proposed design was assessed under deep voltage sag conditions and parameter variations. Its dynamic response was also compared to that of a standard SMC approach.The performance analysis and simulation results confirmed the ability of the proposed approach to maintain the active power,currents, DC-link voltage and electromagnetic torque within their acceptable ranges even under the most severe unbalanced voltage conditions. It was also shown to be robust to uncertainties and parameter variations, while effectively mitigating chattering in comparison with the standard SMC.

Dual sliding mode coordinated control of manipulator grasping system with visual assistance

The operation efficiency of the manipulator is placed in the primary position in automatic production. This paper proposes a coordinated control strategy for joint servo and visual servo to enable timely transfer and accurate gripping in the working area. Aiming at the issues of chattering and slow convergence of traditional sliding mode controller, a fast variable power reaching rate on the basis of the non-singular fast terminal sliding mode controller is proposed, which can effectively reduce the convergence time and chattering. For the purpose of addressing the problem that the traditional visual servo control method is sensitive to the environment, a visual servo controller based on integral sliding mode is proposed, to ensure the favorable positioning accuracy of the manipulator. Based on the two proposed controllers mentioned above, a coordinated control strategy is used to implement the control of the manipulator. Finally, the upper computer software is developed using the C# programming language to monitor the workstation. The feasibility of the above-mentioned method is verified through multiple simulations and experiments.