3D‑Printed Carbon‑Based Conformal Electromagnetic Interference Shielding Module for Integrated Electronics

Electromagnetic interference shielding(EMI SE)modules are the core com-ponent of modern electronics.However,the tra-ditional metal-based SE modules always take up indispensable three-dimensional space inside electronics,posing a major obstacle to the integra-tion of electronics.The innovation of integrating 3D-printed conformal shielding(c-SE)modules with packaging materials onto core electronics offers infinite possibilities to satisfy ideal SE func-tion without occupying additional space.Herein,the 3D printable carbon-based inks with various proportions of graphene and carbon nanotube nanoparticles are well-formulated by manipulating their rheological peculiarity.Accordingly,the free-constructed architectures with arbitrarily-customized structure and multifunctionality are created via 3D printing.In particular,the SE performance of 3D-printed frame is up to 61.4 dB,simultaneously accompanied with an ultralight architecture of 0.076 g cm^(-3) and a superhigh specific shielding of 802.4 dB cm3 g^(-1).Moreover,as a proof-of-concept,the 3D-printed c-SE module is in situ integrated into core electronics,successfully replacing the traditional metal-based module to afford multiple functions for electromagnetic compatibility and thermal dissipa-tion.Thus,this scientific innovation completely makes up the blank for assembling carbon-based c-SE modules and sheds a brilliant light on developing the next generation of high-performance shielding materials with arbitrarily-customized structure for integrated electronics.

Robust optical mode converter based on topological waveguide arrays

Optical mode converters are essential for enhancing the capacity of optical communication systems. However, fabrication errors restrict the further improvement of conventional mode converters. To address this challenge, we have designed an on-chip TE0–TE1mode converter based on topologically protected waveguide arrays. The simulation results demonstrate that the converter exhibits a mode coupling efficiency of 93.5% near 1550 nm and can tolerate a relative fabrication error of 30%. Our design approach can be extended to enhance the robustness for other integrated photonic devices, beneficial for future development of optical network systems.

Synergistic Coupling of Sulfide Electrolyte and Integrated 3D FeS_(2)Electrode Toward Long-Cycling All-Solid-State Lithium Batteries

FeS_(2)cathode is promising for all-solid-state lithium batteries due to its ultra-high capacity,low cost,and environmental friendliness.However,the poor performances,induced by limited electrode-electrolyte interface,severe volume expansion,and polysulfide shuttle,hinder the application of FeS_(2)in all-solid-state lithium batteries.Herein,an integrated 3D FeS_(2)electrode with full infiltration of Li6PS5Cl sulfide electrolytes is designed to address these challenges.Such a 3D integrated design not only achieves intimate and maximized interfacial contact between electrode and sulfide electrolytes,but also effectively buffers the inner volume change of FeS_(2)and completely eliminates the polysulfide shuttle through direct solid-solid conversion of Li2S/S.Besides,the vertical 3D arrays guarantee direct electron transport channels and horizontally shortened ion diffusion paths,endowing the integrated electrode with a remarkably reduced interfacial impedance and enhanced reaction kinetics.Benefiting from these synergies,the integrated all-solid-state lithium battery exhibits the largest reversible capacity(667 mAh g^(-1)),best rate performance,and highest capacity retention of 82%over 500 cycles at 0.1 C compared to both a liquid battery and non-integrated all-solid-state lithium battery.The cycling performance is among the best reported for FeS_(2)-based all-solid-state lithium batteries.This work presents an innovative synergistic strategy for designing long-cycling high-energy all-solid-state lithium batteries,which can be readily applied to other battery systems,such as lithium-sulfur batteries.

Strongly Gain Coupled DFB Laser Monolithically Integrated with a Self Alignment Spot Size Converter

A new type strongly gain coupled (GC) DFB laser and a new type self alignment spot size converter (SA SSC) are proposed and successfully fabricated.The strongly GC DFB laser is monolithically integrated with the SA SSC with three step epitaxies.A high single mode yield and large side mode suppression ratio is obtained from the strongly GC DFB laser.A near circle far field pattern is obtained by using the SA SSC.

Improving Characteristics of Integrated Switched-Capacitor DC-DC Converter by CMOS Technology

An integrated 3.3V/1.2V SC DC-DC converter operating under 10MHz with a fixed duty radio of 0.5 is presented.To improve the output current of the converter,CMOS technology is adopted to fabricate the switching devices,and mutually compensatory circuitry technology is also employed to double the output current furthermore.The simulation results using Hspice simulation software,show that the output currents of a single unit circuit and two unit circuits connected in a mutually compensatory manner of the improved converter is about 12.5mA and 26mA,respectively.The power conversion efficiency of the mutually compensatory circuit can amount to 73%,while its output voltage ripple is less than 1.5%.The converter is fabricated in standard Rohm 0.35μm CMOS technology in Tokyo University of Japan.The test result indicates that the output current of 9.8mA can be obtained from a single unit circuit of the improved converter.

Monolithically Integrated Laser Diode and Electroabsorption Modulator with Dual-Waveguide Spot-Size Converter Output

A 1.60μm laser diode and electroabsorption modulator monolithically integrated with a novel dual-waveguide spot-size converter output for low-loss coupling to a cleaved single-mode optical fiber are demonstrated.The devices emit in a single transverse and quasi single longitudinal mode with an SMSR of 25.6dB.These devices exhibit a 3dB modulation bandwidth of 15.0GHz,and modulator DC extinction ratios of 16.2dB.The output beam divergence angles of the spot-size converter in the horizontal and vertical directions are as small as 7.3°×18.0°,respectively,resulting in a 3.0dB coupling loss with a cleaved single-mode optical fiber.

1.55μm Laser Diode Monolithically Integrated with Spot-Size Converter Using Conventional Process

A novel 1 55μm laser diode with spot size converter is designed and fabricated using conventional photolithography and chemical wet etching process.For the laser diode,a ridge double core structure is employed.For the spot size converter,a buried ridge double core structure is incorporated.The laterally tapered active core is designed and optically combined with the thin and wide passive core to control the size of mode.The laser diode threshold current is measured to be 40mA together with high slop efficiency of 0 35W/A.The beam divergence angles in the horizontal and vertical directions are as small as 14 89°×18 18°,respectively,resulting in low coupling losses with a cleaved optical fiber (3dB loss).

A Novel Topology of Single-Phase AC-DC Integrated Boost-SEPIC (IBS) Converter Using Common Part Sharing Method (CPSM) for High Step-Up Applications

A novel topology of Integrated Boost-SEPIC (IBS) AC-DC converter using common part sharing method (CPSM) has been proposed in this paper. Conventional boost converters with bridge rectifier configuration are inefficient due to limited voltage step-up ratio which may not be applicable for high step-up applications as in the case of micro generators. The proposed IBS topology is based on the common part sharing method capable of operating both for positive and negative half cycle of the input signal. Result and simulation were conducted using PSIM environment. The proposed AC-DC IBS topology eliminates the requirement of bridge rectifier achieving high efficiency (about 99%), improved power factor (0.75, leading) and lower THD (about 38.8%) which is within IEEE standard.

Design Criterion for Interleaving and Magnetically Integrated Bidirectional DC/DC Converters

双向DC/DC变换器中大功率储能电感的设计是一件困难而具有挑战性的工作,提出研究双向DC/DC变换器的交错并联磁集成理论以克服这一困难。将三相Buck＋Boost双向DC/DC变换器的所有相电感集成为一个耦合电感,对磁集成后变换器运行在Buck模式下的稳态电流纹波和暂态响应速度进行深入研究,给出三相Buck＋Boost交错并联磁集成双向DC/DC变换器运行在Buck模式下的设计准则,即在设计这种变换器时,应根据占空比的大小及稳态相电流纹波和暂态总输出电流响应速度的技术要求,利用该文所给出的设计公式和设计区域选择磁集成耦合电感的反向耦合系数。仿真和实验验证了理论分析的正确性。

A novel design of power management integrated circuit with 90 plus efficiency used in AC/DC converter

Recently, resonant AC/DC converter has been accepted by the industry. However, the efficiency will be decreased at light load. So, a novel topology with critical controlling mode combined with resonant ones is proposed in this paper. The new topology can correspond to a 90 plus percent of power converting. So,a novel topology of an state of art integrated circuit, which can be used as power management circuit, has been designed based on the above new topology. A simulator which is specifically suitable for the power controller has been founded in this work and it has been used for the simulation of the novel architecture and the proposed integrated circuit.

A 150 mV-1.2 V Fully-Integrated DC-DC Converter for Thermal Energy Harvesting

With the increasing use of low voltage portable devices and wireless systems, energy harvesting has become an attractive approach to overcome the problems associated with battery life and power source. Among the different types of microenergy scavengers, the TEG （thermoelectric generators） are one of the most commonly used one. Unfortunately, due to the very small amount of voltage delivered by the TEG, an efficient DC/DC （direct current/direct current） conversion and power management techniques are needed. In this paper, a CMOS （complementary metal oxide semiconductor） fully-integrated DC/DC convener for energy harvesting applications is presented. The startup-voltage of the converter is about 140 mV, the output voltage exceeds 1.5 V, with a 20% power efficiency at least. The architecture for boosting such extremely low voltages is based on an ultra-low-voltage oscillator cross connected to two phase charge pump. The overall circuit does not require any external components and can be fully integrated in a standard CMOS low voltage technology. A test-chip has been designed in UMC （united microelectronics corporation） 180 nm CMOS process.

High-Performance and Flexible Co-Planar Integrated Microsystem of Carbon-Based All-Solid-State Micro-Supercapacitor and Real-Time Temperature Sensor

With the rapid development of flexible and portable microelectronics,the extreme demand for miniaturized,mechanically flexible,and integrated microsystems are strongly stimulated.Here,biomass-derived carbons(BDCs)are prepared by KOH activation using Qamgur precursor,exhibiting three-dimensional(3D)hierarchical porous structure.Benefiting from unobstructed 3D hierarchical porous structure,BDCs provide an excellent specific capacitance of 433 F g^(-1)and prominent cyclability without capacitance degradation after 50000 cycles at 50 A g^(-1).Furthermore,BDC-based planar micro-supercapacitors(MSCs)without metal collector,prepared by mask-assisted coating,exhibit outstanding areal-specific capacitance of 84 mF cm^(-2)and areal energy density of 10.6μWh cm^(-2),exceeding most of the previous carbon-based MSCs.Impressively,the MSCs disclose extraordinary flexibility with capacitance retention of almost 100%under extreme bending state.More importantly,a flexible planar integrated system composed of the MSC and temperature sensor is assembled to efficiently monitor the temperature variation,providing a feasible route for flexible MSC-based functional micro-devices.

Analysis and Experimental Study of Proportional-Integral Sliding Mode Control for DC/DC Converter

DC/DC converter using the proportional-integral (PI) sliding mode control (SMC) scheme is investigated, including the selection of the switching surface, the proof of the reaching condition and the existence condition of sliding motion. The sliding regime and the local stability are given. The implementation of the PI SMC is simpler than other SMC schemes and the steady-state error is eliminated. A prototype based on Buck converter is built up. The experimental results show that the dynamic performance and robustness to the parameter variations and external disturbances are improved.

A 12bit 300MHz Current-Steering CMOS D/A Converter

The proposed DAC consists of a unit current-cell matrix for 8MSBs and a binary-weighted array for 4LSBs,trading-off between the precision,speed,and size of the chip.In order to ensure the linearity of the DAC,a double Centro symmetric current matrix is designed by the Q2 random walk strategy.To achieve better dynamic performance,a latch is added in front of the current switch to change the input signal,such as its optimal cross-point and voltage level.For a 12bit resolution,the converter reaches an update rate of 300MHz.

双频DC-DC变换器的磁集成技术

双频Buck变换器由两个降压单元级联构成,具有动态响应快,开关损耗小等优势。然而不足的是磁件占据了整个系统的大部分体积与重量,降低了系统的功率密度。针对这一问题,提出一种三段式绕制磁集成技术,将磁件以解耦的方式集成在一副磁心中。该文首先建立集成磁件的磁路等效模型,通过抵消各绕组之间的耦合作用推导出解耦条件,并详细阐述了磁心的选取、匝数以及气隙的设计原则。其次,利用有限元仿真平台对所提集成磁件进行建模分析,与现有的集成方法相比,磁通密度分布更为均匀,磁心的利用率得到了有效提升。最后,搭建一台48 V/12 V、108 W的实验样机,体积和重量同分离磁件相比降低了31.2%和25.3%,提高了系统的功率密度,验证了该集成方法理论分析的正确性和可行性。

200Ms/s 177mW 8bit Folding and Interpolating CMOS A/D Converter

A CMOS folding and interpolating analog-to-digital converter (ADC) for embedded application is described.The circuit is fully compatible with standard digital CMOS technology.A modified folding block implemented without resistor contributes to a small chip area.At the input stage,offset averaging reduces the input capacitance and the distributed track-and-hold circuits are proposed to improve signal-to-noise-plus-distortion ratio.The 200Ms/s 8bit ADC with 177mW total power consumption at 3.3V power supply is realized in standard digital 0.18μm 3.3V CMOS technology.

A 16 bit Stereo Audio ΣΔ A/D Converter

A 16 bit stereo audio novel stability fifth-order ∑△ A/D converter that consists of switched capacitor ∑△ modulators, a decimation filter, and a bandgap circuit is proposed. A method for the stabilization of a high order single stage ∑△ modulator is also proposed. A new multistage comb filter is used for the front end decimation filter. The ∑△ A/D converter achieves a peak SNR of 96dB and a dynamic range of 96dB. The ADC was implemented in 0. 5μm 5V CMOS technology. The chip die area occupies only 4. 1mm × 2.4mm and dissipates 90mW.

A Novel Regulation Technique and Its Application to Design of Embedded SC DC-DC Converters

An optimized design of the monolithic switched capacitor DC-DC converter is presented.The general topologic circuit and its basic operating principles are discussed theoretically.Circuit equivalent resistance regulation method is proposed as a feasible method to design the on-chip converters.N-channel MOSFETs,instead of Schottky diodes,are used as the diodes in the converters because of their processing compatibility in monolithic fabrication.One more manufacture step,however,is expected to adjust the threshold voltage of the MOSFETs for improving output characteristics of the converters.As an example,a step-up switched-capacitor converter is fabricated in a 2μm p-well double-poly single-metal CMOS technology with breakdown voltage of 15V.Test results indicate that a single sampling cell with 0.4mm 2 of die size can deliver energy up to 0.63mW at 5V output under the condition of 3V input.Efficiency of the tested sample is 68% at 9.8MHz switching frequency...

基于D-分割法的直流变换器遗传自抗扰控制器设计

针对光伏发电系统中DC-DC变换器由于负载和工作环境条件变化等扰动引起的输出波动问题,提出一种基于D-分割法的直流变换器遗传自抗扰控制器(ADRC)设计方法。该方法适用于设计光伏发电领域中的双向DC-DC变换器,采用D-分割法获得满足闭环系统鲁棒稳定的ADRC控制器参数范围;利用具有全局寻优能力的遗传算法,按综合性能指标在该范围内进行参数寻优。实验结果表明,所提基于D-分割法的直流变换器遗传自抗扰控制器设计方法能有效抑制微网母线侧的电压波动和负载突变,提高控制器的鲁棒性,增强光伏发电系统的动态响应性能和抗干扰能力。