Application of integrated geophysical techniques in geothermal exploration in Binhai County, Jiangsu Province

Integrated geophysical technology is a necessary and effective means for geothermal exploration.However,integration of geophysical technology for large‐scale surveys with those for geothermal reservoir localization is still in development.This study used the controlled source audio‐frequency magnetotelluric method technology for large‐scale exploration to obtain underground electrical structure information and micromotion detection technology to obtain underground wave velocity structure information.The combination of two detection technologies was used for local identification of geothermal reservoirs.Further,auxiliary correction and inversion constraint were implemented through the audio magnetotelluric sounding technology for maximum authenticity restoration of the near‐and transition‐field data.Through these technology improvements,a geothermal geological model was established for the Binhai County of Jiangsu Province in China and potential geothermal well locations were identified.On this basis,a geothermal well was drilled nearly 3000m deep,with a daily water volume of over 2000m3/day and a geothermal water temperature of 51°C at the well head.It is found that predictions using the above integrated geophysical exploration technology are in good agreement with the well geological formation data.This integrated geophysical technology can be effectively applied for geothermal exploration with high precision and reliability.

Development of 0.50μm CMOS Integrated Circuits Technology

Submicron CMOS IC technology, including triple layer resist lithography technology, RIE, LDD, Titanium Salicide, shallow junction, thin gate oxide, no bird's beak isolation and channel's multiple implantation doping technology have been developed. 0.50μm. CMOS integrated circuits have been fabricated using this submicron CMOS process.

Effects of Integrated Technology of Medicine and Fertilizer on Bacterial Wilt of Tobacco

In order to validate the control effects of integrated technology of medicine and fertilizer on tobacco bacterial wilt,field experiments were conducted by using youmeili and tetracycline as the test agents.The results obtained were listed as follows:(1)The incidence rate of bacterial wilt ascended more quickly after July 10 th,the incidence of CK reached 78.30%on July 25 th.(2)The control effect of“youmeili 3 g+tetramycin 200 times liquid”reached 69.47%,significantly higher than other treatments.(3)The output value of“Youmeil 3 g+tetramycin 200 times liquid”served as 1635.66 yuan/667m^2,with the highest economic character in all treatments.In a word,integrated technology of medicine and fertilizer was a feasible approach to control tobacco bacterial wilt.

Application Effect of Integrated Water and Fertilizer Technology for Tomato

Integrated water and fertilizer technology has the advantages of saving water,fertilizer and labour,which is widely applied in tomato plantation. Integrated water and fertilizer technology in topdressing and whole process of big and small tomatoes were studied,and their application effects were contrasted and analyzed,and application advantages and scopes of the two models were concluded.

Analysis of the Economical, Ecological and Quality Advantages Consequent Resulting from Initiation of Technology Integrated in Metallurgy

Metallurgical sector plays an important role in the economy of each country because steel products present essential raw material for basic industries. Changes in the sectors of iron, steel and non-ferrous metals and the current development of technology forces the steel mills increased productivity, reduce production costs while ensuring to obtain a product with the required properties and to improve the competitiveness of enterprises in the global market. Currently, the most popular in meeting these requirements, enjoys a method of integration which combines individual operations into one integrated whole. The use of modem, perfectly designed, fully automated design of mechanical, hydraulic and measurement allowed us to achieve an innovative line of production. This article presents the general characteristics of the steel industry and a description of the latest integrated technology currently used in foundries and rolling mills. It also presents examples of the use of integrated technologies in metallurgy and the effects of economic, environmental and quality resulting from their use on an industrial scale.

China Association of Chinese Medicine Paper notice for seminar on clinical application of new technology of integrated Chinese and western medicine in treating sequelae of cerebrovascular diseases

Hosted by ChinaAssociation of Chinese Medicine,and organized by World Journal of Integrated traditional and western Medicine,seminar on clinical application of new technology of integrated Chinese and western medicine in treating sequelae of cerebrovascular diseases is planned to be held in Nanning,Guangxi in August.

Navigating a Change:An In-depth Analysis of the National Education Policy’s Impact on Learning and Development

The patterns and trends in formal higher education are changing.As world economy is moving towards a knowledge based economy,the needs and requirements of formal higher education are also changing.Countries are currently reevaluating their options of formalizing their growing education sector by drafting new education policy that aims to meet the demands of this futuristic knowledge based and technology driven economy with involvement of Artificial Intelligence and Machine Learning(AIML).Factors addressing core competence of employability,holistic development and attainment of skills are the new mantras of evolving modern day’s economy.To be in sync with such demand,requirement,and challenges,the Indian government took a significant step in drafting a New Education Policy popularly known as‘NEP 2020’.This paper makes an attempt to analyze the significant characteristics and dimensions of this NEP 2020 by undertaking a survey among stakeholders mostly students to arrive at certain key findings such as inducing centric,employable,skillful,and holistic development of students attaining such higher education.It also points out some of the implementation issues which require lead time to be adjusted with the system.

Establishment and Application of Urbanization Strategic Environ-mental Assessment Integration Technology System

Urbanization strategic environmental assessment (SEA) is an effective instrument to enhance the harmo-nious development of urban complex system, integrating of environment and development in decision-making. Ur-banization strategic environmental assessment integration technology system (SEA-ITS) is composed of "3S" (RS, GIS and GPS), environmental expert system and environmental model system, coupling with appropriate SEA working process closely. In this paper, the structure and components of SEA-ITS are analyzed based on Chinese characteristics, meanwhile methods to fulfill the following system functions are discussed: urbanization SEA in-quiring, analysis, discrimination, assessment, prediction, decision-making and output. Moreover, methods and tech-nologies employed in different urbanization SEA hierarchies are summarized. As a case study, urbanization SEA-ITS is applied in Changchun City to solving complex real problems. Methods such as system dynamics and grey cluster are adopted to achieve the environmental impact assessment on the eco-industrial system planning. It is revealed that the system designed is capable of reflecting the dynamic behavior of eco-industrial system under different sce-narios, meanwhile accomplishing strategy optimization and supplying scientific reference. The 4th strategy, namely concerning on economy increase and its interaction with science, technology and environment progress, would have the best efficiency. Further, more attention should be paid to the secondary development of integration techniques and function modification system of urbanization SEA-ITS.

The 8×10 GHz Receiver Optical Subassembly Based on Silica Hybrid Integration Technology for Data Center Interconnection

An 8×10 GHz receiver optical sub-assembly （ROSA） consisting of an 8-channel arrayed waveguide grating （AWG） and an 8-channel PIN photodetector （PD） array is designed and fabricated based on silica hybrid integration technology. Multimode output waveguides in the silica AWG with 2% refractive index difference are used to obtain fiat-top spectra. The output waveguide facet is polished to 45° bevel to change the light propagation direction into the mesa-type PIN PD, which simplifies the packaging process. The experimentM results show that the single channel I dB bandwidth of AWG ranges from 2.12nm to 3.06nm, the ROSA responsivity ranges from 0.097 A/W to 0.158A/W, and the 3dB bandwidth is up to 11 GHz. It is promising to be applied in the eight-lane WDM transmission system in data center interconnection.

A MULTIDISCIPLINARY AND INTEGRATED STUDY OF RICE PRECISION FARMING

In terms of demands of rice farming in the southern China, the information processing system and the yield measurement system that is installed in combine harvester, are designed and completed. Now the systems have been used in demonstration site in the Experiment Base of Shanghai Precision Agriculture. Based on the idea of spatial-oriented, object-oriented, user-oriented, the Farm Geographic Information System for precision farming of rice was developed, which is characterized by intelligence and visualized. The Decision-making Management System is integrated with rice growth model, expert model for rice cultivation. The DGPS, RS, GIS and intelligence sensors and computer technique were adopted in building the artificial intelligence system for measuring grain yield that is installed in combine harvester, so the combine harvester could provide the grain yield distribution map real-timely. The environmental and economic assessment shows that the precision rice farming applied in the demonstration site will benefit the society, economy and ecology greatly.

Fabrication of integrated resistors in printed circuit boards

In order to utilize integrated passive technology in printed circuit boards （PCBs）, manufacturing processing for integrated resistors by lamination method was investigated. Integrated resistors fabricated from Ohmega technologies in the experiment were 1 408 pieces per panel with four different patterns A, B, C and D and four resistance values of 25, 50, 75 and 100 fL Six panel per batch and four batches were performed totally. The testing was done for 960 pieces of integrated resistors randomly selected with the same size. The value distribution ranges and the relative standard deviation （RSD） show that the scatter degree of the resistance decreases with the resistor size increasing and/or with the resistance increasing. Patterns D with resistance of 75 and 100% for four patterns have the resistance value variances less than 10%. Patterns C and D with resistance of 100 Ω have the manufacturing tolerance less than 10%. The process capabilities are from about 0.6 to 1.6 for the designed testing patterns, which shows that the integrated resistors fabricated have the potential to be used in multilayer PCBs in the future.

Clastic compaction unit classification based on clay content and integrated compaction recovery using well and seismic data

Compaction correction is a key part of paleogeomorphic recovery methods. Yet, the influence of lithology on the porosity evolution is not usually taken into account. Present methods merely classify the lithologies as sandstone and mudstone to undertake separate porositydepth compaction modeling. However, using just two lithologies is an oversimplification that cannot represent the compaction history. In such schemes, the precision of the compaction recovery is inadequate. To improve the precision of compaction recovery, a depth compaction model has been proposed that involves both porosity and clay content. A clastic lithological compaction unit classification method, based on clay content, has been designed to identify lithological boundaries and establish sets of compaction units. Also, on the basis of the clastic compaction unit classification, two methods of compaction recovery that integrate well and seismic data are employed to extrapolate well-based compaction information outward along seismic lines and recover the paleo-topography of the clastic strata in the region. The examples presented here show that a better understanding of paleo-geomorphology can be gained by applying the proposed compaction recovery technology.

Composite technology of earthwork construction on taliks in cryolithic zones

This paper reviews construction and technological solutions for roadbeds in talik areas of permafrost soil, and proposes an integrated technology for prevention and elimination of taliks during construction periods. It also summarizes the expe- rience of process regulation scheduling and soil conditions monitoring during construction.

Mathematical model analysis of new-type magnetic integrated CRT considering magnetic leakage

A novel magnetic integrated controllable reactor of transformer type(CRT)has the advantages of simple structure,flexible assembly,convenient maintenance and practicability.To analyze its operation characteristics accurately,we establish corresponding equivalent mathematical model considering magnetic leakage based on magnetic circuit and circuit dualistic transformation method.The distribution of magnetic leakage field of each winding is analyzed qualitatively,and the analytical calculation formulas of magnetizing inductance and leakage inductance of each winding are derived.Based on this,the analytical calculation formulas of short-circuit impedance and winding current of CRT under different working conditions are derived.The field-circuit coupling finite element model of the magnetic integrated CRT is established to simulate the current of each winding under different working conditions.The results show that the analytical calculation results of each winding current have good consistency with the finite element calculation results,indicating the validity of CRT equivalent mathematical model and correctness of the analytical formulas of leakage inductance,short-circuit impedance and winding current of CRT.The working winding current of CRT is increasing gradually with the operation of control winding in turn to realise the transition of CRT compensation capacity from zero to a rated value.

Practice and reflection of Baosteel longitudinal UOE submerged arc welding technologies self-reliance integrated innovation

The capability of self-reliance integrated innovation is one of the key factors that influence steel enterprise' s core competitiveness.The main equipments of Baoteel UOE unit are from abroad,but the key consistent pipe manufacturing technologies including iron making,steel making,heavy plates are self-reliance integrated.The self-reliance integrated innovation of Baosteel UOE unit has the features of high challenge, high efficiency,high starting point,consistent technologies etc.The independent innovation capacity achieved by adjusting measures to local conditions and periods in introducing projects is the key to the development of continuing robust.Baosteel longitudinal UOE submerged arc welding tube project practice also offer beneficial reference for independent of integration innovation.

Experienced College Instructors＇ Personal Epistemology in Teaching Social Studies and Their Perception of Using Technology

Experience includes explicit and tacit knowledge. Explicit knowledge is from a person＇s ＂espoused theory＂ which is what a person believes and claims to follow. Tacit knowledge is from a person＇s ＂theory-in-use＂ which lies behind a person＇s action or behavior. The knowledge of teaching demonstrated in the classroom can be referred to as tacit knowledge or theory-in-use which is often the theory behind the practice of experienced teachers. Freema Elbaz （1983） points out that the ＂experience＂ is referred to as ＂practical knowledge＂, which ＂provides the basis for a conceptualization which sees the teacher as possessing valuable resources＂ （6） and allows teachers to explicitly indicate and tacitly demonstrate their experience in teaching. The purpose of the study is to investigate how experienced college instructors apply their good teaching qualities to teaching social studies. The participants are three experienced college instructors teaching social studies. A concept map and a final reflection are used to elicit experienced instructors＇ personal epistemology in teaching social studies and their perception of technology use in the classroom. Each participant was asked to generate nine good teaching qualities and draw their concept map based on the nine qualities. Their concept maps reflected their theory-in-use and showed the relationship among their teaching qualities by displaying them together in a graphic form and how each teaching quality is connected to another. Participants＇ technology use was also explored to get their perception of the role of technology and their actual use of it in teaching. Then they were asked to validate their concept map data and reflect on their classroom teaching and use of technology. The findings show the three instructors taught under different schema and decided what their means and ends should be and how technology can help facilitate teaching and learning. However, most of them seemed to treat the content （e.g., democracy education） as their ends and thus used pedagogy （e.g., technology） as the means to reach the ends. Their technology use also reflected their perception of technology in teaching and revealed their limited understanding of technology integration, which leads to potential problems.

In-Service Teachers’Perceptions of Technology Integration in English as a Foreign Language Classrooms in China:A Multiple-Case Study

Purpose This study investigates university in-service English as a Foreign Language(EFL)teachers’perceptions of technology integration and the relevant factors that may affect their technology integration in the classroom.Design/Approach/Methods This multiple case study applies Teo's extended technology acceptance model(TAM)and the theory of teacher value beliefs associated with using technology to explore seven in-service EFL teachers’perceptions of effective technology integration and the challenges they encountered.Findings This study suggests that(1)perceived usefulness and(2)teacher value beliefs are two important factors that influence in-service teachers’technology integration.Additional factors are(3)subjective norm,(4)facilitating conditions of the environment,and(5)cultural values.Originality/Value This study contributes to the existing literature on in-service EFL teachers’technology integration and increases the applicability of the extended TAM in China.This study also provides insights into these teachers’perceptions and practices of technology integration.Finally,insights gleaned from this study will guide school-level,local,and national educational policy groups on optimally supporting in-service teachers’future technology integration.

The Role of Mathematics in STEAM Education under the“Double Reduction”Policy

This essay delves into the pivotal role of mathematics within the context of STEAM(science,technology,engineering,arts,and mathematics)education under China’s“Double Reduction”policy.Amidst a shifting global education landscape that emphasizes holistic growth,policies such as the“Double Reduction”strategy underscore the significance of well-rounded development alongside academic excellence.By advocating for a balanced approach to education,the policy resonates with the principles of STEAM education,which seeks to cultivate versatile and innovative individuals.Mathematics,acting as a unifying force,connects disparate STEAM disciplines,fostering interdisciplinary collaboration and preparing students to thrive in a rapidly evolving,technology-driven world.This essay provides an in-depth exploration of the multifaceted role of mathematics in STEAM education,drawing on specific cases and scholarly references to highlight its contributions to creativity,critical thinking,and holistic development.

Classification and Integration of Storage and Transportation Engineering Technologies in Potato Producing Areas of China

Considering the development of potato （Solanum tuberosum） industry in China, the existing technologies of potato storage and transportation in the produc- ing area were analyzed through investigation on four main potato production areas. Unear classification was used to conduct the technology classification. According to the technical attributes and characteristics, the potato technologies of storage and transportation in producing area were classified with large classes, middle classes, small classes and subclasses, into the agricultural production area processing and storage engineering technology system, to reveal the structure and functions. Mean- while, the widely used technologies were integrated and summarized into 5 principal technology integration programs, which could be used for the technology integration of the new management subjects such as planting professional cooperatives, family farms, enterprises and so on.