Integrated Automation of Power Plant Electrical System

Aiming at the comparatively laggard level of power plant electrical system automation, this paper analyzes the feasibility,necessity and some key points of the application of integrated automation technology to power plant electrical system. New idea using fieldbus control system technology is presented. This paper also gives the outline and detailed schemes.

Channel estimation in integrated radar and communication systems with power amplifier distortion

To reduce the negative impact of the power amplifier(PA)nonlinear distortion caused by the orthogonal frequency division multiplexing(OFDM)waveform with high peak-to-average power ratio(PAPR)in integrated radar and communication(RadCom)systems is studied,the channel estimation in passive sensing scenarios.Adaptive channel estimation methods are proposed based on different pilot patterns,considering nonlinear distortion and channel sparsity.The proposed methods achieve sparse channel results by manipulating the least squares(LS)frequency-domain channel estimation results to preserve the most significant taps.The decision-aided method is used to optimize the sparse channel results to reduce the effect of nonlinear distortion.Numerical results show that the channel estimation performance of the proposed methods is better than that of the conventional methods under different pilot patterns.In addition,the bit error rate performance in communication and passive radar detection performance show that the proposed methods have good comprehensive performance.

Design of Coal Mine Integrated Automation System Based on NetLinx

A network structure of coalmine integrated automation system based on NetLinx was proposed. The features of three-layer-network structure were discussed in detail. The mechanism of time determination of the network was analyzed. A design example of the integrated automation system for a real coalmine was presented.

Design and application of integrated automation system platform of mine based on PON

This article analyzes the design and integrates application of a mine integrated automation system platform based on PON. At the beginning, the paper analyzes the basic principle and structure of PON. The set of integrated automation network platform according to the information transmission characteristics of mine based on access network and Ethernet of PON is designed. The paper descripes the platform in detail from aspacts of designs of system hardware, software and others. The results show that the system platform can improve the efficiency and reduce the cost.

Digital Coal Mine Integrated Automation System Based on ControlNet

A three-layer model for digital communication in a mine is proposed. Two basic platforms are discussed: A uniform transmission network and a uniform data warehouse. An actual,ControlNet based,transmission network plat-form suitable for the Jining No.3 coal mine is presented. This network is an information superhighway intended to inte-grate all existing and new automation subsystems. Its standard interface can be used with future subsystems. The net-work,data structure and management decision-making all employ this uniform hardware and software. This effectively avoids the problems of system and information islands seen in traditional mine-automation systems. The construction of the network provides a stable foundation for digital communication in the Jining No.3 coal mine.

Integrated Automation System for Rare Earth Countercurrent Extraction Process

Lower automation level in industrial rare-earth extraction processes results in high production cost, inconsistent product quality and great consumption of resources in China. An integrated automation system for extraction process of rare earth is proposed to realize optimal product indices, such as product purity,recycle rate and output. The optimal control strategy for output component, structure and function of the two-gradcd integrated automation system composed of the process management grade and the process control grade were discussed. This system is successfully applied to a HAB yttrium extraction production process and was found to provide optimal control, optimal operation, optimal management and remarkable benefits.

Architectural Benevolent Builders (ABB): A global system automating integration of structured and semistructured sources

We investigate highly sophisticated mechanisms that merge and automate interoperability of heterogeneous traditional information systems together with the World Wide Web as one world. In particular, we introduce the ABB system that employs most of the Benevolent Builders (BB) which are assertions, integration rules, ABB network graph and agents to activate the components’ versatility to reconcile the semantics involved in data sharing in order to withstand the terrific dynamic computer technology in the present and future information age. The ABB is a global application system with its operation covering local databases to the Internet. The first three BB are passive objects, whereas, the agent has a strong versatility to perceive events, perform actions, communicate, make commitments, and satisfy claims. Due to the BB’s power of intelligence, ABB also has the capability to filter out and process only the relevant operational sources like preferences (i.e. customer’s interest) from the sites. The ABB’s richness in knowledge and flexibility to accommodate various data models, manages to link: system to system or firm to firm regardless of the field such as: engineering, insurance, medical, space science, and education, to mention a few.

Development of Physical Library for Short Channel CMOS / SOI Integrated Circuits

An 'Integrated Device and Circuit simulator' for thin film (0.05-0.2μm) submicron (0.5μm) and deep submicron (0.15, 0.25,0.35μm) CMOS/ SOI integrated circuit has been developed. This simulator has been used for design and fabrication and physical library development of thin film submicron and deep submicron CMOS/ SOI integrated circuit.

Integrated Joint Source-Channel Symbol-by-Symbol Decoding of Variable-Length Codes Using 3-D MAP Sequence Estimation

Most of multimedia schemes employ variable-length codes （VLCs） like Huffman code as core components in obtaining high compression rates. However VLC methods are very sensitive to channel noise. The goal of this paper is to salvage as many data from the damaged packets as possible for higher audiovisual quality. This paper proposes an integrated joint source-channel decoder （I-JSCD） at a symbol-level using three-dimensional （3-D） trellis representation for first-order Markov sources encoded with VLC source code and convolutional channel code. This method combines source code and channel code state-spaces and bit-lengths to construct a two-dimensional （2-D） state-space, and then develops a 3-D trellis and a maximum a-posterior （MAP） algorithm to estimate the source sequence symbol by symbol. Experiment results demonstrate that our method results in significant improvement in decoding performance, it can salvage at least half of （50%） data in any channel error rate, and can provide additional error resilience to VLC stream like image, audio, video stream over high error rate links.

Study on Integrated Automation of Three Gorges Cascades

This paper briefly describes the basic situation and features of Three Gorges Cascade, discusses the principle,functions, structure of the integrated automation system, and explains advanced techniques and principle and associated experiments of its monitoring and control

基于Wonderware System Platform的模板化设备管理在矿山企业的实施及应用

针对提高矿山企业对诸多生产工段生产监控和设备管理效率的问题，以三山岛金矿新立充填站自动化子系统接人三山岛综合自动化集成平台的工作为背景，介绍了在集成平台模板化的管理方式下集成充填站子系统实施过程中的重要环节．并分别介绍了集成平台模板化管理的优势以及为矿山企业生产和设备管理带来的高效和便捷。

THROTTLE CONTROL STRATEGIES IN THE PROCESS OF INTEGRATED POWERTRAIN CONTROL

Combining with the development of automated manual transmission （AMT）, the various throttle control demands are analyzed under different working conditions of AMT such as tracking acceleration pedal, start, shift and so on. Based on simulation, the responding throttle control strategies are proposed, and a simple but effective throttle control method is presented. The testing results have proved that the strategies are effective for improving the pedal tracking precision and the qualities of start and shift.

Reduction of signal reflection along through silicon via channel in high-speed three-dimensional integration circuit

The through silicon via （TSV） technology has proven to be the critical enabler to realize a three-dimensional （3D） gigscale system with higher performance but shorter interconnect length. However, the received digital signal after trans- mission through a TSV channel, composed of redistribution layers （RDLs）, TSVs, and bumps, is degraded at a high data-rate due to the non-idealities of the channel. We propose the Chebyshev multisection transformers to reduce the signal reflec- tion of TSV channel when operating frequency goes up to 20 GHz, by which signal reflection coefficient （$11） and signal transmission coefficient （$21） are improved remarkably by 150% and 73.3%, respectively. Both the time delay and power dissipation are also reduced by 4% and 13.3%, respectively. The resistance-inductance-conductance-capacitance （RLGC） elements of the TSV channel are iterated from scattering （S）-parameters, and the proposed method of weakening the signal reflection is verified using high frequency simulator structure （HFSS） simulation software by Ansoft.

Multi-Sinusoidal Waveform Shaping for Integrated Data and Energy Transfer in Aging Channels

Integrated data and energy transfer(IDET)is capable of simultaneously delivering on-demand data and energy to low-power Internet of Everything(Io E)devices.We propose a multi-carrier IDET transceiver relying on superposition waveforms consisting of multi-sinusoidal signals for wireless energy transfer(WET)and orthogonal-frequency-divisionmultiplexing(OFDM)signals for wireless data transfer(WDT).The outdated channel state information(CSI)in aging channels is employed by the transmitter to shape IDET waveforms.With the constraints of transmission power and WDT requirement,the amplitudes and phases of the IDET waveform at the transmitter and the power splitter at the receiver are jointly optimised for maximising the average directcurrent(DC)among a limited number of transmission frames with the existence of carrier-frequencyoffset(CFO).For the amplitude optimisation,the original non-convex problem can be transformed into a reversed geometric programming problem,then it can be effectively solved with existing tools.As for the phase optimisation,the artificial bee colony(ABC)algorithm is invoked in order to deal with the nonconvexity.Iteration between the amplitude optimisation and phase optimisation yields our joint design.Numerical results demonstrate the advantage of our joint design for the IDET waveform shaping with the existence of the CFO and the outdated CSI.

Time evolution of negative binomial optical field in a diffusion channel

We find the time evolution law of a negative binomial optical field in a diffusion channel. We reveal that by adjusting the diffusion parameter, the photon number can be controlled. Therefore, the diffusion process can be considered a quantum controlling scheme through photon addition.

High-Mobility P-Type MOSFETs with Integrated Strained-Si_(0.73)Ge_(0.27) Channels and High-κ/Metal Gates

Strained-Si0.73Ge0.27 channels are successfully integrated with high-R/metal gates in p-type metai-oxide- semi- conductor field effect transistors （pMOSFETs） using the replacement post-gate process. A silicon cap and oxide inter layers are inserted between Si0.73Ge0.27 and high-κ dielectric to improve the interface. The fab- ricated Si0.73Ge0.27 pMOSFETs with gate length of 3Onto exhibit good performance with high drive current （~428μA/μm at VDD = 1 V） and suppressed short-channel effects （DIBL^77mV/V and SS^90mV/decade）. It is found that the enhancement of effective hole mobility is up to 200% in long-gate-length Si0.73Ge0.27-channel pMOSFETs compared with the corresponding silicon transistors. The improvement of device performance is reduced due to strain relaxation as the gate length decreases, while 26% increase of the drive current is still obtained for 30-nm-gate-length Si0.73Ge0.27 devices.

O2O＇s construction based on the research of Business model withintegration of online and offline channel

With the rapid development of information technology, it appears that a single online channel or a single offline is not able to meet the consumers＇ shopping needs, the enterprises will have a better development only by making the online and offline channels be in fusion and promote each other. This paper will combine the general business modes with corporate channel integration pattern, build out different forms of the market mode including market, enterprise and customers basing on different influence level, and analyze out the enterprise how to implement the business mode of integration basing on the influence factors under the background of different businessmodes, then apply the corresponding O2Oprocess to the mode, so as to broaden the enterprise selling channels for a better development.

Study on Mandatory Access Control in a Secure Database Management System

This paper proposes a security policy model for mandatory access control in class B1 database management system whose level of labeling is tuple. The relation hierarchical data model is extended to multilevel relation hierarchical data model. Based on the multilevel relation hierarchical data model, the concept of upper lower layer relational integrity is presented after we analyze and eliminate the covert channels caused by the database integrity. Two SQL statements are extended to process polyinstantiation in the multilevel secure environment. The system is based on the multilevel relation hierarchical data model and is capable of integratively storing and manipulating multilevel complicated objects ( e.g., multilevel spatial data) and multilevel conventional data ( e.g., integer, real number and character string).

Auditing the Use of DBMS Covert Storage Channels Relevant with Transactions

This paper proposes the concept of transaction-type covert storage channels, which are caused by database storage resources. It also proposes that the mode of auditing those channels be based on the transactions. Next, the paper analyzes and resolves the two problems arising from auditing the use of transaction-type covert storage channels in database systems: namely, the relationship between channel variables, which are altered (or viewed) by the transaction and satisfy integrity constraints in DBMS, and database states; and the circumvention of covert storage channel audit in DBMS.

Discussion on Standardization and Automatic Flow Measurement of U-shaped Channel Water

In human life,water resources are inseparable.In recent years,China’s population growth has accelerated,and the industrial level has been continuously improved,resulting in the rapid use and waste of water resources.The protection and rational distribution of water resources are the most pressing issue in China’s water resources.At present,the water measuring facilities of the U-shaped channel mainly include a straight wall measuring pool,a parabolic throat measuring pool,and a long throat measuring pool.In view of the problems in irrigation measurement,the empirical water measurement of basic open-channel and automatic flow measurement system in irrigation district is summarized to improve the accuracy,fairness,and rationality of water measurement,and promote irrigation district management to a higher level.