Optimized Operation of Park Integrated Energy System with Source-Load Flexible Response Based on Comprehensive Evaluation Index

To better reduce the carbon emissions of a park-integrated energy system(PIES),optimize the comprehensive operating cost,and smooth the load curve,a source-load flexible response model based on the comprehensive evaluation index is proposed.Firstly,a source-load flexible response model is proposed under the stepped carbon trading mechanism;the organic Rankine cycle is introduced into the source-side to construct a flexible response model with traditional combined heat and power(CHP)unit and electric boiler to realize the flexible response of CHP to load;and the load-side categorizes loads into transferable,interruptible,and substitutable loads according to the load characteristics and establishes a comprehensive demand response model.Secondly,the analytic network process(ANP)considers the linkages between indicators and allows decision-makers to consider the interactions of elements in a complex dynamic system,resulting in more realistic indicator assignment values.Considering the economy,energy efficiency,and environment,the PIES optimization operation model based on the ANP comprehensive evaluation index is constructed to optimize the system operation comprehensively.Finally,the CPLEX solver inMATLABwas employed to solve the problem.The results of the example showthat the source-load flexible response model proposed in this paper reduces the operating cost of the system by 29.90%,improves the comprehensive utilization rate by 15.00%,and reduces the carbon emission by 26.98%,which effectively enhances the system’s economy and low carbon,and the comprehensive evaluation index based on the ANP reaches 0.95,which takes into account the economy,energy efficiency,and the environment,and is more superior than the single evaluation index.

Development of index system for inherently safer process design using an integrated approach

With a growing population, an increasing number of petrochemical facilities are built with larger capacity and more complexity, which pose a great risk to assets, community and environment. The value of inherently safer design is recognized with time by all stakeholders, and an effective tool is needed to evaluate and compare inherent safety of alternative technologies. This study developed a safety index to evaluate existing technologies for their safety levels and guide inherently safer design. The Integrated Risk-based Safety Index(IRSI) was developed based on a comprehensive review of petrochemical processes, incident cases from Sinopec and US Chemical Safety Board, and existing safety index systems. The IRSI included all major hazards, including fire, explosion,toxic release, dust explosion, physical explosion, and runaway. Also, the integrated life cycle approach considered chemical hazards, equipment failure rates and safety measures in this risk-based index. Advanced modeling techniques, PHAST simulation and Neural Network, were used in the development of three novel sub-indices in the projects, fire, explosion and toxic release. The index system could be easily incorporated into a user friendly tool for the ease of application. A case study of hydrogen dioxide was conducted using the IRSI, which showed its capability for evaluating the safety level of process facilities.

Spatial Distribution of Integrated Impact Index of Mega-event——A Case Study of Expo '99 Kunming

Taking the affinity between events and media as a conceptualization base, a total of 1032 related news re-ports of Expo '99 Kunming, gathered from the internet data bank of China INFOBANK from 1992 to 2003, are used as data sources. After classifying them with a communication research method-the content analysis, a data bank for SPSS is set up, and a mathematic model called the Integrated Impact Index of Expo '99 Kunming is constituted. With the model, the spatial distribution of the total integrated impacts of Expo '99 Kunming on the regions or cities with different regional scales is analysed quantitatively. The conclusions are: 1) the Expo '99 Kunming made obvious integrated impacts on the regions or cities of every scale, especially in the venue city and the region-Kunming City and Yunnan Province; 2) it had corresponding impacts on other provinces; 3) the spatial distribution of Integrated Impact Index had a disaggregation with both plane extension and spotted decentralization; and 4) there was a distance decay law in all three scales of regions (Kunming City, Yunnan Province and the whole China), which incarnated the spatial extension law of the integrated impact of a special mega-event.

Comprehensive Characterization Model of Integrated Cotton Fiber Quality Index

An integrated cotton fiber quality index （ICFQI） model with cotton fiber qualities which can directly express cotton fiber integrated quality and spinning yarn quality was studied. The fiber length, strength, Micronalre （fiber fineness and fiber maturity）, uniformity of fiber length, and short fiber content are the pivotal indexes expressing ICFQI. All of the results above are the basic knowledge to build up the models of ICFQI. According to spinning consistency index （SCI）, spinning strength and spinning yarn integrated quality, ICFQI was the best choice. As the methods of ICFQI had quite a lot of advantages like explicit mechanism, few independent variables. The integrated fiber quality index had a significant positive correlation with yarn strength and spinning consistency, significant negative correlation with yarn evenness and yarn thin places. In additional, the model of the relationship between ICFQI and SCI was established as： SCI=0. 235 6·ICFQI ＋56.153. It was concluded that ICFQI value was the shared reference index for the testing of fiber inspection agency and the selection and distribution of raw cotton bales by textile mills.

Development of an Integrated Coastal Vulnerability Index for the Ivorian Coast in West Africa

This study assesses the vulnerable state of the 566-km Ivorian coastal area using the physical (geomorphology, coastal slope, coastal retreat rate, relative sea level rise and wave/Tide energy) and socio-economic (coastal population density, harbor, airport, road, land use and protected area) factors as indicators. This enabled an Integrated Coastal Vulnerability Index to be determined for the Ivorian coastal zone. This Index could be defined as the weighted average of indexes based on physical and socio-economic factors. The study revealed that vulnerability of the western and the eastern coastlines of Cote d’Ivoire are strongly influenced by human activities, while physical forcing affects significantly the vulnerability of the central section. The relative vulnerability of the different sections depends also strongly on the geomorphology, wave energy, coastal population density and land use factors. The west and central sections of the coastline are more resilient than the eastern section when integrating physical and socio-economic factors. The Integrated Coastal Vulnerability Index, based on physical and socio-economic factors, appears to be more appropriate for coastal vulnerability assessment. These results could be useful in the development of adaptation strategies to increase the resilience of this coastal area and then extended for West Africa Coastal Areas Management.

Parameters Sensitivity Characteristics of Highly Integrated Valve-Controlled Cylinder Force Control System

Nowadays, a highly integrated valve?controlled cylinder(HIVC) is applied to drive the joints of legged robots. Although the adoption of HIVC has resulted in high?performance robot control, the hydraulic force system still has problems, such as strong nonlinearity, and time?varying parameters. This makes HIVC force control very diffcult and complex. How to improve the control performance of the HIVC force control system and find the influence rule of the system parameters on the control performance is very significant. Firstly, the mathematical model of HIVC force control system is established. Then the mathematical expression for parameter sensitivity matrix is obtained by applying matrix sensitivity analysis(PSM). Then, aimed at the sinusoidal response under(three factors and three levels) working conditions, the simulation and the experiment are conducted. While the error between the simulation and experiment can’t be avoided. Therefore, combined with the range analysis, the error in the two performance indexes of sinusoidal response under the whole working condition is analyzed. Besides, the sensitivity variation pattern for each system parameter under the whole working condition is figured out. Then the two sensitivity indexes for the three system parameters, which are supply pressure, proportional gain and initial displacement of piston, are proved experimentally. The proposed method significantly reveals the sensitivity characteristics of HIVC force control system, which can make the contribution to improve the control performance.

INTEGRATED VEGETATION CLASSIFICATION AND MAPPINGUSING REMOTE SENSING AND GIS TECHNIQUES

NOAA-AVHRR data have been more and more used by scientists because of its short temporal resolution,large scope, inexpensive cost and broad wave bands. On macro and middle scale of vegetation remote sensing, NOAAAVHRR possesses an advantage when compared with other satellites. However, because NOAA-AVHRR also problem of low resolution, data distortion and geometrical distortion, in the area of application of NOAA-AVHRR in largescale vegetation - mapping, the accuracy of vegetation classification should be improved. This paper discuss the feasibilityof integrating the geographic data in GIS(Geographical Information System) and remotely sensed data in GIS. Under theenvironment of GIS, temperature, precipitation and elevation, which serve as main factors affecting vegetation growth,were processed by a mathematical model and qualified into geographic image under a certain grid system. The geographicimage were overlaid to the NOAA-AVHRR data which had been compressed and processed. In order to evaluate the usefulness of geographic data for vegetation classification, the area under study was digitally classified by two groups of interpreter: the proposed methodology using maximum likelihood classification assisted by the geographic database and a conventional maximum likelihood classification only. Both result were compared using Kappa statistics. The indices to both theproposed and the conventional digital classification methodology were 0. 668(yew good) and 0. 563(good), respetively.The geographic database rendered an improvement over the conventional digital classification. Furthermore, in this study,some problems related to multi-sources data integration are also discussed.

Integrated energy efficiency evaluation of a multi-source multi-load desalination micro-energy network

With increasing global shortage of fresh water resources,many countries are prioritizing desalination as a means of utilizing abundantly available seawater resources.Integrated energy efficiency evaluation is a scientific method for the quantitative analysis of energy efficiency based on multiple indicators and is very useful for investment,construction,and scientific decision-making for desalination projects.In this paper,the energy efficiency evaluation of the micro energy network (MEN) of desalination for multi-source and multi-load is studied,and the basic idea of comprehensive energy efficiency evaluation is analyzed.The process includes the use of a MEN model to establish an integrated energy efficiency evaluation index system,taking into consideration energy,equipment,economic,environmental,and social factors.A combined evaluation method considering subjective and objective comprehensive weights for multi-source multi-load desalination MENs is proposed to evaluate the energy efficiency of desalination and from multiple perspectives.

Integrated assessment of river health based on water quality, aquatic life and physical habitat

The health conditions of Liao River were assessed using 25 sampling sites in April 2005, with water quality index, biotic index and physical habitat quality index. Based on the method of cluster analysis （CA） for water quality indices, it revealed that heavily polluted sites of Liao River are located at estuary and mainstream. The aquatic species surveyed were attached algae and benthic invertebrates. The result showed that the diversity and biomass of attached algae and benthic index of biotic integrity （B-IBI） were degrading as the chemical and physical quality of water bodies deteriorating. Physiochemical parameters, BODs, CODcr, TN, TP, NH3-N, DO, petroleum hydrocarbon and conductivity, were statistically analyzed with principal component analysis and correlation analysis. The statistical results were incorporated into the integrated assessing water quality index, combining fecal coliform count, attached algae diversity, B-IBI and physical habitat quality score. A comprehensive integrated assessing system of fiver ecological health was established. Based on the systimetic assessment, the assessed sites are categorized into 9 ＂healthy＂ and ＂sub-healthy＂ sites and 8 ＂sub-sick＂ and ＂sick＂ sites.

Integration of Geological, Geophysical and Seismological Data for Seismic Hazard Assessment Using Spatial Matching Index

Probabilistic seismic hazard assessment (PSHA) takes into account as much data as possible for defining the initial seismic source zone model. In response to this, an algorithm has been developed for integration of geological, geophysical and seismological data through a spatial index showing the presence or absence of a potential seismic source feature in the input data. The spatial matching index (SMI) is calculated to define the coincidence of independent data showing any indications for existence of a fault structure. It is applied for hazard assessment of Bulgaria through quantification of the seismic potential of 416 square blocks, 20 × 20 km in size covering the entire territory of Bulgaria and extended by 20 km outside of the country borders. All operations are carried out in GIS environment using its capabilities to work with different types of georeferenced spatial data. Results show that the highest seismic potential (largest SMI) is observed in 56 block elements (13% of the territory) clearly delineating cores of the source zones. Partial match is registered in 98 block elements when one of the features is missing. Not any evidence for earthquake occurrence is predicted by our calculation in 117 elements, comprising 28% of the examined area. The quantitative parameter for spatial data integration which is obtained in the present research may be used to analyze information regardless of its type and purpose.

Integrated Assessment of Mineral Resources and Environmentin Mid-South of Shandong Province

On the bases of the field survey and a large number of testing data, we process the qualitative and quantitative assessment of the mine environment in the mid south of Shandong Province using the following grade Ⅰ factors:the surface subsidence in mining area, the three wastes of mine industries, the pollution sources, the surface water pollution, the underground water pollution and the air pollution. By means of emitting factor judgment and water quality indexes, we locate pollution sources, main pollutants, pollution type and pollution grade in the study area. Using the MAPGIS, we draw a zonality map of the mine environment. This paper attempts to offer a concrete example, including valuable assessment method, data and conclusion, for the assessment of mine environment from the integrated assessment of mineral resources and mine environment. This research is oriented towards the sustainable development and the ecological environment optimization.

Integrated Evaluation and Its Application on Decision-Making of Comprehensive Transportation Projects

The comprehensive transportation project involves with many different transportation methods, such as railway, highway, waterway, airline, and pipeline, which have their special characteristics. To evaluate the transporta- tion project with different transportation methods under the same system, the integrated evaluation method should be built up on the basis of a common index system. This paper suggests a feasible integrated evaluation method including index system establishing, indices transacting, the index weight distributing, and weighted value integrating.

Parallel Integrated Model-Driven and Data-Driven Online Transient Stability Assessment Method for Power System

More and more uncertain factors in power systems and more and more complex operation modes of power systems put forward higher requirements for online transient stability assessment methods.The traditional modeldriven methods have clear physical mechanisms and reliable evaluation results but the calculation process is time-consuming,while the data-driven methods have the strong fitting ability and fast calculation speed but the evaluation results lack interpretation.Therefore,it is a future development trend of transient stability assessment methods to combine these two kinds of methods.In this paper,the rate of change of the kinetic energy method is used to calculate the transient stability in the model-driven stage,and the support vector machine and extreme learning machine with different internal principles are respectively used to predict the transient stability in the data-driven stage.In order to quantify the credibility level of the data-driven methods,the credibility index of the output results is proposed.Then the switching function controlling whether the rate of change of the kinetic energy method is activated or not is established based on this index.Thus,a newparallel integratedmodel-driven and datadriven online transient stability assessment method is proposed.The accuracy,efficiency,and adaptability of the proposed method are verified by numerical examples.

基于Multi-index LQ与CIC指数的集成评估框架

将多指标区位商计算和工业集群竞争力评价相结合,生成集成的工业集群竞争力评估框架,运用统计数据,可对我国区域工业集群现状及工业集群竞争力水平进行分析。结果表明,区域工业经济存在4种类型,即集聚的竞争优势产业、集聚的竞争劣势产业、非集聚的竞争优势产业和非集聚的竞争劣势产业;据此,我国区域工业经济的支柱产业和主导产业可以被确定。

基于中医证候与精液质量相关参数构建精子DNA碎片预测模型与验证

背景:中医证候与精液质量相关参数相结合,共同预测精子DNA碎片指数(DNA fragmentation index,DFI)异常增高的发生并绘制列线图,能显著提高临床的实操性与应用效能,为临床全面评估精液质量,采取积极干预措施以改善临床结局及制定个体化医疗方案提供依据。目的:探讨基于中医证候与精液质量相关参数构建精子DNA碎片的预测模型与验证。方法:回顾性分析2019年7月至2021年7月在广西壮族自治区南溪山医院中医男科接受中医证候诊断及精子DNA碎片率检查的不育患者共420例,据《人类精液检查与处理实验室手册》(第6版),将其中137例精子DFI>30%患者纳入精子DFI异常增高组,将283例精子DFI≤30%作为对照组;首先采用单因素分析筛选精子DFI异常增高的影响因素,然后采用套索算法(LASSO)校正因子共线性问题并筛选出最佳匹配因子后,将其纳入多因素向前逐步Logistic回归找出其独立影响因素并绘制列线图,最后采用受试者工作曲线、校准曲线、临床决策曲线、临床影响曲线对该预测模型进行区分度与准确度及临床应用效能验证。结果与结论:①单因素分析结果显示,年龄、体质量指数、前向运动率、精子总活率、精子浓度、精子形态学、肾阳虚衰证、湿热下注证、肾精不足证为引发精子DFI异常增高的影响因子(P<0.05);②通过LASSO回归进一步筛选出的最佳匹配因素为年龄、体质量指数、精子总活率、精子浓度、精子形态学、肾阳虚衰证、湿热下注证、肾精不足证(P<0.05);③多因素向前逐步Logistic回归结果显示年龄、体质量指数、精子浓度、精子总活率、湿热下注证、肾阳虚衰证共6项为引发精子DFI异常增高的独立影响因素;④受试者工作曲线显示,模型组曲线下面积为0.760(0.713,0.806),验证组曲线下面积为0.745(0.714,0.776),说明该预测模型具有较好的区分度;⑤校准曲线平均绝对误差0.040,Hosmer-Lemeshow检验P>0.05,表明该模型预测发生精子DFI异常增高的概率与实际发生精子DFI异常增高的概率无显著统计学差异,证实该模型具有较好的准确度;⑥临床决策曲线与临床影响曲线显示,模型组与验证组分别在阈概率值为0.08-0.84与0.09-0.78时具有临床最大净获益,且在该阈概率范围内具有较好的临床应用效能;⑦结果表明,年龄、体质量指数、精子浓度、精子总活率、湿热下注证、肾阳虚衰证为引发精子DFI异常增高的独立影响因素,通过其构建的临床预测模型列线图具有较好的临床预测价值与临床应用效能,可为临床全面评估精液质量、预后与干预及个体化医疗服务提供依据。

Low bend loss,high index,composite morphology ultra-fast laser written waveguides for photonic integrated circuits

We demonstrate a novel,composite laser written 3D waveguide,fabricated in boro-aluminosilicate glass,with a refractive index contrast of 1.12×10^(−2).The waveguide is fabricated using a multi-pass approach which leverages the respective refractive index modification mechanisms of both the thermal and athermal inscription regimes.We present the study and optimisation of inscription parameters for maximising positive refractive index change and ultimately demonstrate a dramatic advancement on the state of the art of bend losses in laser-written waveguides.The 1.0 dB cm−1 bend loss cut-off radius is reduced from 10 mm to 4 mm,at a propagation wavelength of 1550 nm.

Integrating multisource RS data and GIS techniques to assist the evaluation of resource-environment carrying capacity in karst mountainous area

The karst mountainous area is an ecologically fragile region with prominent humanland contradictions.The resource-environment carrying capacity(RECC)of this region needs to be further clarified.The development of remote sensing(RS)and geographic information system(GIS)provides data sources and processing platform for RECC monitoring.This study analyzed and established the evaluation index system of RECC by considering particularity in the karst mountainous area of Southwest China;processed multisource RS data(Sentinel-2,Aster-DEM and Landsat-8)to extract the spatial distributions of nine key indexes by GIS techniques(information classification,overlay analysis and raster calculation);proposed the methods of index integration and fuzzy comprehensive evaluation of the RECC by GIS;and took a typical area,Guangnan County in Yunnan Province of China,as an experimental area to explore the effectiveness of the indexes and methods.The results showed that:(1)The important indexes affecting the RECC of karst mountainous area are water resources,tourism resources,position resources,geographical environment and soil erosion environment.(2)Data on cultivated land,construction land,minerals,transportation,water conservancy,ecosystem services,topography,soil erosion and rocky desertification can be obtained from RS data.GIS techniques integrate the information into the RECC results.The data extraction and processing methods are feasible on evaluating RECC.(3)The RECC of Guangnan County was in the mid-carrying level in 2018.The midcarrying and low-carrying levels were the main types,accounting for more than 80.00%of the total study area.The areas with high carrying capacity were mainly distributed in the northern regions of the northwest-southeast line of the county,and other areas have a low carrying capacity comparatively.The coordination between regional resource-environment status and socioeconomic development is the key to improve RECC.This study explores the evaluation index system of RECC in karst mountainous area and the application of multisource RS data and GIS techniques in the comprehensive evaluation.The methods can be applied in related fields to provide suggestions for data/information extraction and integration,and sustainable development.

Quick System-Level DDR3 Signal Integrity Simulation Research

---Double data rate synchronous dynamic random access memory （DDR3） has become one of the most mainstream applications in current server and computer systems. In order to quickly set up a system-level signal integrity （SI） simulation flow for the DDR3 interface, two system-level SI simulation methodologies, which are board-level S-parameter extraction in the frequency-domain and system-level simulation assumptions in the time domain, are introduced in this paper. By comparing the flow of Speed2000 and PowerSI/Hspice, PowerSI is chosen for the printed circuit board （PCB） board-level S-parameter extraction, while Tektronix oscilloscope （TDS7404） is used for the DDR3 waveform measurement. The lab measurement shows good agreement between simulation and measurement. The study shows that the combination of PowerSI and Hspice is recommended for quick system-level DDR3 SI simulation.