An integrated vacuum pressure swing adsorption(VPSA) and Rectisol process is proposed for CO_(2) capture from underground coal gasification(UCG) syngas. A ten-bed VPSA process with silica gel adsorbent is firstly desi...An integrated vacuum pressure swing adsorption(VPSA) and Rectisol process is proposed for CO_(2) capture from underground coal gasification(UCG) syngas. A ten-bed VPSA process with silica gel adsorbent is firstly designed to pre-separate and capture 74.57% CO_(2) with a CO_(2) purity of 98.35% from UCG syngas(CH_(4)/CO/CO_(2)/H_(2)/N_(2)= 30.77%/6.15%/44.10%/18.46%/0.52%, mole fraction, from Shaar Lake Mine Field,Xinjiang Province, China) with a feed pressure of 3.5 MPa. Subsequently, the Rectisol process is constructed to furtherly remove and capture the residual CO_(2)remained in light product gas from the VPSA process using cryogenic methanol(233.15 K, 100%(mass)) as absorbent. A final purified gas with CO_(2) concentration lower than 3% and a regenerated CO_(2) product with CO_(2) purity higher than 95% were achieved by using the Rectisol process. Comparisons indicate that the energy consumption is deceased from 2.143 MJ·kg^(-1) of the single Rectisol process to 1.008 MJ·kg^(-1) of the integrated VPSA & Rectisol process, which demonstrated that the deployed VPSA was an energy conservation process for CO_(2) capture from UCG syngas. Additionally, the high-value gas(e.g., CH_(4)) loss can be decreased and the effects of key operating parameters on the process performances were detailed.展开更多
Process planning and scheduling are two major plann in g and control activities that consume significant part of the lead-time, theref ore all attempts are being made to reduce lead-time by automating them. Compute r ...Process planning and scheduling are two major plann in g and control activities that consume significant part of the lead-time, theref ore all attempts are being made to reduce lead-time by automating them. Compute r Aided Process Planning (CAPP) is a step in this direction. Most of the existin g CAPP systems do not consider scheduling while generating a process plan. Sched uling is done separately after the process plan has been generated and therefore , it is possible that a process plan so generated is either not optimal or feasi ble from scheduling point of view. As process plans are generated without consid eration of job shop status, many problems arise within the manufacturing environ ment. Investigations have shown that 20%~30% of all process plans generated are not valid and have to be altered or suffer production delays when production sta rts. There is thus a major need for integration of scheduling with computer aide d process planning for generating more realistic process plans. In doing so, eff iciency of the manufacturing system as a whole is expected to improve. Decision support system performs many functions such as selection of machine too ls, cutting tools, sequencing of operations, determination of optimum cutting pa rameters and checking availability of machine tool before allocating any operati on to a machine tool. The process of transforming component data, process capabi lity and decision rules into computer readable format is still a major obstacle. This paper proposes architecture of a system, which integrates computer aided p rocess-planning system with scheduling using decision support system. A decisio n support system can be defined as " an interactive system that provides the use rs with easy access to decision models in order to support semi-structured or u nstructured decision making tasks".展开更多
Through our newly-developed "chemical vapor deposition integrated process (ISVD-IP)'" using carbon OlOXlae (t..u2) as me raw matenal and only carbon source introduced, CO2 could be catalytically activated and c...Through our newly-developed "chemical vapor deposition integrated process (ISVD-IP)'" using carbon OlOXlae (t..u2) as me raw matenal and only carbon source introduced, CO2 could be catalytically activated and converted to a new solid-form product, i.e., carbon nanotubes (CO2-derived) at a quite high yield (the single-pass carbon yield in the solid-form carbon-product produced from CO2 catalytic capture and conversion was more than 30% at a single-pass carbon-base). For comparison, when only pure carbon dioxide was introduced using the conventional CVD method without integrated process, no solid-form carbon-material product could be formed. In the addition of saturated steam at room temperature in the feed for CVD, there were much more end-opening carbon nano-tubes produced, at a slightly higher carbon yield. These inspiring works opened a remarkable and alternative new approach for carbon dioxide catalytic capture to solid-form product, comparing with that of CO2 sequestration (CCS) or CO2 mineralization (solidification), etc. As a result, there was much less body volume and almost no greenhouse effect for this solid-form carbon-material than those of primitive carbon dioxide.展开更多
Some key techniques for the development of web-based product data management (PDM) system are introduced. The four-tiered B/S architecture of a PDM system-BITPDM is introduced first, followed by its design and imple...Some key techniques for the development of web-based product data management (PDM) system are introduced. The four-tiered B/S architecture of a PDM system-BITPDM is introduced first, followed by its design and implementation, including virtual data vault, flexible coding system, document management, product structure and configuration management, workflow/process and product maturity management. BITPDM can facilitate the activities from new product introduction phase to manufacturing, and manage the product data andtheir dynamic changing history. Based on Microsoft. NET, XML, web service and SOAP techniques, BITPDM realizes the integration and efficient management of product information.展开更多
This paper reviews recent developments in the contin- uous processing of steels in Japan.The following items are discussed:continuous casting-direct rolling(CC-DR) process of hot-rolled strip:thermomechanical control ...This paper reviews recent developments in the contin- uous processing of steels in Japan.The following items are discussed:continuous casting-direct rolling(CC-DR) process of hot-rolled strip:thermomechanical control process(TMCP)of heavy plates:in—line heat treating pro- cess of rails:direct lead patenting(DLP)process of wire rods;and fully integrated processing line(FIPL)of cold-rolled strip.展开更多
Proper matching of forestry machinery is important when raising mechanization levels for forestry production. In the matching process, forestry machinery needs not only expertise, but also improved methods for solving...Proper matching of forestry machinery is important when raising mechanization levels for forestry production. In the matching process, forestry machinery needs not only expertise, but also improved methods for solving problems. I propose combination of case-based reasoning (CBR) and rule-based reasoning (RBR) by calculating the similarity of quantitative parameters of various forestry machines in an analytical and hierarchical process. I calculated the similarity of machin-ery used in forest industries to enable better selection and matching of equipment. I propose a weight-value adjusting method based on sums of squares of deviations in which the individual parameter weights were modified in the process of application. During the process of system design, I put forward a design method knowledge base and generated a dynamic web reasoning framework to integrate the processes of forest industry machinery selection and weight-value adjustment. This enables expansion of the scope of the complete system and enhancement of the reasoning efficiency. I demonstrate the validity and practicability of this method using a practical example.展开更多
Integrated water and fertilizer technology has the advantages of saving water,fertilizer and labour,which is widely applied in tomato plantation. Integrated water and fertilizer technology in topdressing and whole pro...Integrated water and fertilizer technology has the advantages of saving water,fertilizer and labour,which is widely applied in tomato plantation. Integrated water and fertilizer technology in topdressing and whole process of big and small tomatoes were studied,and their application effects were contrasted and analyzed,and application advantages and scopes of the two models were concluded.展开更多
To effectively implement order fulfillment, we present an integrated framework model focusing on the whole process of order fulfillment. Firstly, five aims of the OFS (order fulfillment system) are built. Then after...To effectively implement order fulfillment, we present an integrated framework model focusing on the whole process of order fulfillment. Firstly, five aims of the OFS (order fulfillment system) are built. Then after discussing three major processes of order fulfillment, we summarize functional and quality attributes of the OFS. Subsequently, we investigate SOA (Service Oriented Architecture) and present a SOA meta-model to be an integrated framework and to fulfill quality requirements. Moreover,based on the SOA meta-model, we construct a conceptual framework model that aims to conveniently integrate other functions fiom different systems into the order fulfillment system. This model offers enterprises a new approach to implementing order fulfillment.展开更多
Cities are facing challenges of high rise in population number and con-sequently need to be equipped with latest smart services to provide luxuries of life to its residents.Smart integrated solutions are also a need t...Cities are facing challenges of high rise in population number and con-sequently need to be equipped with latest smart services to provide luxuries of life to its residents.Smart integrated solutions are also a need to deal with the social and environmental challenges,caused by increasing urbanization.Currently,the development of smart services’integrated network,within a city,is facing the bar-riers including;less efficient collection and sharing of data,along with inadequate collaboration of software and hardware.Aiming to resolve these issues,this paper recommended a solution for a synchronous functionality in the smart services’integration process through modeling technique.Using this integration modeling solution,atfirst,the service participants,processes and tasks of smart services are identified and then standard illustrations are developed for the better understand-ing of the integrated service group environment.Business process modeling and notation(BPMN)language based models are developed and discussed for a devised case study,to test and experiment i.e.,for remote healthcare from a smart home.The research is concluded with the integration process model application for the required data sharing among different service groups.The outcomes of the modeling are better understanding and attaining maximum automation that can be referenced and replicated.展开更多
Considering both process planning and shop scheduling in manufacturing can fully utilize their complementarities,resulting in improved rationality of process routes and high-quality and efficient production. Hence,the...Considering both process planning and shop scheduling in manufacturing can fully utilize their complementarities,resulting in improved rationality of process routes and high-quality and efficient production. Hence,the study of Integrated Process Planning and Scheduling (IPPS) has become a hot topic in the current production field. However,when performing this integrated optimization,the uncertainty of processing time is a realistic key point that cannot be neglected. Thus,this paper investigates a Fuzzy IPPS (FIPPS) problem to minimize the maximum fuzzy completion time. Compared with the conventional IPPS problem,FIPPS considers the fuzzy process time in the uncertain production environment,which is more practical and realistic. However,it is difficult to solve the FIPPS problem due to the complicated fuzzy calculating rules. To solve this problem,this paper formulates a novel fuzzy mathematical model based on the process network graph and proposes a MultiSwarm Collaborative Optimization Algorithm (MSCOA) with an integrated encoding method to improve the optimization. Different swarms evolve in various directions and collaborate in a certain number of iterations. Moreover,the critical path searching method is introduced according to the triangular fuzzy number,allowing for the calculation of rules to enhance the local searching ability of MSCOA. The numerical experiments extended from the well-known Kim benchmark are conducted to test the performance of the proposed MSCOA. Compared with other competitive algorithms,the results obtained by MSCOA show significant advantages,thus proving its effectiveness in solving the FIPPS problem.展开更多
Integrator processes with long delay are difficult to control. Nonlinear characteristics of actuators make the control problem more challenging. A technique is proposed in this paper for global satisfactory control (...Integrator processes with long delay are difficult to control. Nonlinear characteristics of actuators make the control problem more challenging. A technique is proposed in this paper for global satisfactory control (GSC) of such processes with relay-type nonlinearity. An oscillatory control signal is injected into the nonlinear process; the amplitude and frequency of the oscillatory signal are designed to linearise the nonlinear process in the sense of harmonic analysis; and a state feedback controller is configured to implement GSC over the linearised process. An illustrative example is given to demonstrate the effectiveness of展开更多
This study presents an overview of the current status of hydrogen production in relation to the global requirement for energy and resources.Subsequently,it symmetrically outlines the advantages and disadvantages of va...This study presents an overview of the current status of hydrogen production in relation to the global requirement for energy and resources.Subsequently,it symmetrically outlines the advantages and disadvantages of various production routes including fossil fuel/biomass conversion,water electrolysis,microbial fermentation,and photocatalysis(PC),in terms of their technologies,economy,energy consumption,and costs.Considering the characteristics of hydrogen energy and the current infrastructure issues,it highlights that onsite production is indispensable and convenient for some special occasions.Finally,it briefly summarizes the current industrialization situation and presents future development and research directions,such as theoretical research strengthening,renewable raw material development,process coupling,and sustainable energy use.展开更多
A robust tuning method for ο^Astroem's two-degree of Freedom Modified Smith Predictor (MSP) is proposed, and it can achieve the fast setpoint and load disturbance responses independently. The tuning rules may meet...A robust tuning method for ο^Astroem's two-degree of Freedom Modified Smith Predictor (MSP) is proposed, and it can achieve the fast setpoint and load disturbance responses independently. The tuning rules may meet the requirements within a certain delay margin according to the robustness theory. The simulation results illustrate that the tuning method is efficient compared with other controllers. Finally, the MSP controller is applied to the 15L batch fermentation system for controlling the temperature in bioreactor, and the experiment results further verify that the robust tuning rules may achieve good performance.展开更多
For several superior controllers of the first-order integrating processes with long delay, the windup problems are analyzed in detail when the control signal saturates. The results show that these controllers have sim...For several superior controllers of the first-order integrating processes with long delay, the windup problems are analyzed in detail when the control signal saturates. The results show that these controllers have similar characteristics about the process input limitation. And then, a simple and effective anti-windup scheme, without an additional parameter, is designed for these controllers. Simulations run with three main controllers, and the results illustrate that the proposed method may achieve good performance under the nominal and model uncertainty cases.展开更多
The predictive model is built according to the characteristics of the impulse response of integrating process. In order to eliminate the permanent offset between the setpoint and the process output in the presence of ...The predictive model is built according to the characteristics of the impulse response of integrating process. In order to eliminate the permanent offset between the setpoint and the process output in the presence of the load disturbance, a novel error compensation method is proposed. Then predictive functional control of integrating process is designed. The method given generates a simple control structure, which can significandy reduce online computation. Furthermore, the tuning of the controller is fairly straightforward. Simulation results indicate that the designed control system is relatively robust to the parameters variation of the process.展开更多
Process integration is the important aspect of product development process. The recent researches focus on project management, workflow management and process modeling. Based on the analysis of the process, product de...Process integration is the important aspect of product development process. The recent researches focus on project management, workflow management and process modeling. Based on the analysis of the process, product development process is divided into three levels according to different grains from macroscopy to microcosm. Our research concentrate on the workflow and the free-grained design process. According to the need of representing the data and the relationships among them for process integration, context model is introduced, and its characters are analyzed. The tree-like structure of inheritance among context model's classes is illustrated; The relationships of reference among them are also explained. Then, extensible markup language (XML) file is used to depict these classes. A four-tier framework of process integration has been established, in which model-view-controller pattern is designed to realize the separation between context model and its various views. The integration of applications is applied by the encapsulation of enterprise's business logic as distributed services. The prototype system for the design of air filter is applied in an institute.展开更多
Exosomes are now raising focus as a prospective biomarker for cancer diagnostics and prognosis owing to its unique bio-origin and composition.Exosomes take part in cellular communication and receptor mediation and tra...Exosomes are now raising focus as a prospective biomarker for cancer diagnostics and prognosis owing to its unique bio-origin and composition.Exosomes take part in cellular communication and receptor mediation and transfer their cargos(e.g.,proteins,m RNA and DNA).Quantitative analysis of tumor-related nucleic acid mutations can be a potential method to cancer diagnosis and prognosis in early stages.Here we present an integrated microfluidic system for exosome on-chip isolation and lung cancer RNA analysis through droplet digital PCR(dd PCR).Gradient dilution experiments show great linearity over a large concentration range with R^(2)=0.9998.Utilizing the system,four cell lines and two mutation targets were parallelly detected for mutation analysis.The experiments demonstrated mutation heterogeneity and the results were agree with cell researches.These results proved our integrated microfluidic system as a promising means for early cancer diagnosis and prognosis in the era of liquid biopsy.展开更多
Expanded bed adsorption (EBA) has been introduced as a primary recovery step for protein purification from a whole fermentation broth or unclarified cell homogenates. It can also be integrated with a fermentation or c...Expanded bed adsorption (EBA) has been introduced as a primary recovery step for protein purification from a whole fermentation broth or unclarified cell homogenates. It can also be integrated with a fermentation or cell disruption process. Solid matrix is the principal pillar supporting the successful application of the EBA technology. This article summarizes the solid matrices employed in and developed for the EBA process to date. Further development of solid matrices for the expanded bed technique in the recovery of various biological substances from different sources has been addressed.展开更多
One of today's challenges is the integration of ISFETs in chemical and biochemical Microsystems.This article presents a full integration of ISFET chip containing the ISFET/REFET(reference FET) pair,ISFET/REFET amp...One of today's challenges is the integration of ISFETs in chemical and biochemical Microsystems.This article presents a full integration of ISFET chip containing the ISFET/REFET(reference FET) pair,ISFET/REFET amplifiers,bias current generator,as well as a reference electrode structure,all integrated on the same chip based on CMOS technology.The sensor chip was fabricated in a standard 0.35μm CMOS process(Chartered Semiconductor,Singapore).The extra post processing steps have been developed and added for depositing membranes.Finally,the pH response of the integrated sensor was measured with the interface circuit.展开更多
To achieve information integration, process integration and application integration of enterprise, an enterprise integration platform (EIP) based on service-oriented architecture (SOA) is built. The enterprise int...To achieve information integration, process integration and application integration of enterprise, an enterprise integration platform (EIP) based on service-oriented architecture (SOA) is built. The enterprise integration model depending on encapsulating the business processes as well as the enterprise applications by the neutral and standard web services is presented. The problem how to discover the existed enterprise resources and share them was resolved depending on the mechanism of publishing and discovering the services. The EIP is integrated closely with product lifecycle management (PLM) system so that the process integration as well as orchestration of the business process services is implemented by encapsulating the workflow engine of PLM system. Not only process integration and application integration, but also information integration based on the bill of material (BOM) conversion driven by process are achieved. Finally, an interpretive, qualitative case study on EIP is conducted for this research.展开更多
基金financially supported by the Renewable Energy and Hydrogen Projects in National Key Research & Development Program of China (2019YFB1505000)。
文摘An integrated vacuum pressure swing adsorption(VPSA) and Rectisol process is proposed for CO_(2) capture from underground coal gasification(UCG) syngas. A ten-bed VPSA process with silica gel adsorbent is firstly designed to pre-separate and capture 74.57% CO_(2) with a CO_(2) purity of 98.35% from UCG syngas(CH_(4)/CO/CO_(2)/H_(2)/N_(2)= 30.77%/6.15%/44.10%/18.46%/0.52%, mole fraction, from Shaar Lake Mine Field,Xinjiang Province, China) with a feed pressure of 3.5 MPa. Subsequently, the Rectisol process is constructed to furtherly remove and capture the residual CO_(2)remained in light product gas from the VPSA process using cryogenic methanol(233.15 K, 100%(mass)) as absorbent. A final purified gas with CO_(2) concentration lower than 3% and a regenerated CO_(2) product with CO_(2) purity higher than 95% were achieved by using the Rectisol process. Comparisons indicate that the energy consumption is deceased from 2.143 MJ·kg^(-1) of the single Rectisol process to 1.008 MJ·kg^(-1) of the integrated VPSA & Rectisol process, which demonstrated that the deployed VPSA was an energy conservation process for CO_(2) capture from UCG syngas. Additionally, the high-value gas(e.g., CH_(4)) loss can be decreased and the effects of key operating parameters on the process performances were detailed.
文摘Process planning and scheduling are two major plann in g and control activities that consume significant part of the lead-time, theref ore all attempts are being made to reduce lead-time by automating them. Compute r Aided Process Planning (CAPP) is a step in this direction. Most of the existin g CAPP systems do not consider scheduling while generating a process plan. Sched uling is done separately after the process plan has been generated and therefore , it is possible that a process plan so generated is either not optimal or feasi ble from scheduling point of view. As process plans are generated without consid eration of job shop status, many problems arise within the manufacturing environ ment. Investigations have shown that 20%~30% of all process plans generated are not valid and have to be altered or suffer production delays when production sta rts. There is thus a major need for integration of scheduling with computer aide d process planning for generating more realistic process plans. In doing so, eff iciency of the manufacturing system as a whole is expected to improve. Decision support system performs many functions such as selection of machine too ls, cutting tools, sequencing of operations, determination of optimum cutting pa rameters and checking availability of machine tool before allocating any operati on to a machine tool. The process of transforming component data, process capabi lity and decision rules into computer readable format is still a major obstacle. This paper proposes architecture of a system, which integrates computer aided p rocess-planning system with scheduling using decision support system. A decisio n support system can be defined as " an interactive system that provides the use rs with easy access to decision models in order to support semi-structured or u nstructured decision making tasks".
基金the National 973 Program of Ministry of Sciences and Technologies of China(2011CB201202)the National Natural Science Foundation of China(20776089)
文摘Through our newly-developed "chemical vapor deposition integrated process (ISVD-IP)'" using carbon OlOXlae (t..u2) as me raw matenal and only carbon source introduced, CO2 could be catalytically activated and converted to a new solid-form product, i.e., carbon nanotubes (CO2-derived) at a quite high yield (the single-pass carbon yield in the solid-form carbon-product produced from CO2 catalytic capture and conversion was more than 30% at a single-pass carbon-base). For comparison, when only pure carbon dioxide was introduced using the conventional CVD method without integrated process, no solid-form carbon-material product could be formed. In the addition of saturated steam at room temperature in the feed for CVD, there were much more end-opening carbon nano-tubes produced, at a slightly higher carbon yield. These inspiring works opened a remarkable and alternative new approach for carbon dioxide catalytic capture to solid-form product, comparing with that of CO2 sequestration (CCS) or CO2 mineralization (solidification), etc. As a result, there was much less body volume and almost no greenhouse effect for this solid-form carbon-material than those of primitive carbon dioxide.
文摘Some key techniques for the development of web-based product data management (PDM) system are introduced. The four-tiered B/S architecture of a PDM system-BITPDM is introduced first, followed by its design and implementation, including virtual data vault, flexible coding system, document management, product structure and configuration management, workflow/process and product maturity management. BITPDM can facilitate the activities from new product introduction phase to manufacturing, and manage the product data andtheir dynamic changing history. Based on Microsoft. NET, XML, web service and SOAP techniques, BITPDM realizes the integration and efficient management of product information.
文摘This paper reviews recent developments in the contin- uous processing of steels in Japan.The following items are discussed:continuous casting-direct rolling(CC-DR) process of hot-rolled strip:thermomechanical control process(TMCP)of heavy plates:in—line heat treating pro- cess of rails:direct lead patenting(DLP)process of wire rods;and fully integrated processing line(FIPL)of cold-rolled strip.
基金financially supported by the Fundamental Research Funds for the Central Universities Nos.DL12EB01-03the planning subject of "the Twelfth Five-Year-Plan" in National Science and Technology Nos.2012AA102003-2Heilongjiang Natural Science Fund in China Nos.F201116
文摘Proper matching of forestry machinery is important when raising mechanization levels for forestry production. In the matching process, forestry machinery needs not only expertise, but also improved methods for solving problems. I propose combination of case-based reasoning (CBR) and rule-based reasoning (RBR) by calculating the similarity of quantitative parameters of various forestry machines in an analytical and hierarchical process. I calculated the similarity of machin-ery used in forest industries to enable better selection and matching of equipment. I propose a weight-value adjusting method based on sums of squares of deviations in which the individual parameter weights were modified in the process of application. During the process of system design, I put forward a design method knowledge base and generated a dynamic web reasoning framework to integrate the processes of forest industry machinery selection and weight-value adjustment. This enables expansion of the scope of the complete system and enhancement of the reasoning efficiency. I demonstrate the validity and practicability of this method using a practical example.
基金Supported by "Sannongliufang" Technology Collaboration Program in Zhejiang Province in 2014
文摘Integrated water and fertilizer technology has the advantages of saving water,fertilizer and labour,which is widely applied in tomato plantation. Integrated water and fertilizer technology in topdressing and whole process of big and small tomatoes were studied,and their application effects were contrasted and analyzed,and application advantages and scopes of the two models were concluded.
文摘To effectively implement order fulfillment, we present an integrated framework model focusing on the whole process of order fulfillment. Firstly, five aims of the OFS (order fulfillment system) are built. Then after discussing three major processes of order fulfillment, we summarize functional and quality attributes of the OFS. Subsequently, we investigate SOA (Service Oriented Architecture) and present a SOA meta-model to be an integrated framework and to fulfill quality requirements. Moreover,based on the SOA meta-model, we construct a conceptual framework model that aims to conveniently integrate other functions fiom different systems into the order fulfillment system. This model offers enterprises a new approach to implementing order fulfillment.
文摘Cities are facing challenges of high rise in population number and con-sequently need to be equipped with latest smart services to provide luxuries of life to its residents.Smart integrated solutions are also a need to deal with the social and environmental challenges,caused by increasing urbanization.Currently,the development of smart services’integrated network,within a city,is facing the bar-riers including;less efficient collection and sharing of data,along with inadequate collaboration of software and hardware.Aiming to resolve these issues,this paper recommended a solution for a synchronous functionality in the smart services’integration process through modeling technique.Using this integration modeling solution,atfirst,the service participants,processes and tasks of smart services are identified and then standard illustrations are developed for the better understand-ing of the integrated service group environment.Business process modeling and notation(BPMN)language based models are developed and discussed for a devised case study,to test and experiment i.e.,for remote healthcare from a smart home.The research is concluded with the integration process model application for the required data sharing among different service groups.The outcomes of the modeling are better understanding and attaining maximum automation that can be referenced and replicated.
文摘Considering both process planning and shop scheduling in manufacturing can fully utilize their complementarities,resulting in improved rationality of process routes and high-quality and efficient production. Hence,the study of Integrated Process Planning and Scheduling (IPPS) has become a hot topic in the current production field. However,when performing this integrated optimization,the uncertainty of processing time is a realistic key point that cannot be neglected. Thus,this paper investigates a Fuzzy IPPS (FIPPS) problem to minimize the maximum fuzzy completion time. Compared with the conventional IPPS problem,FIPPS considers the fuzzy process time in the uncertain production environment,which is more practical and realistic. However,it is difficult to solve the FIPPS problem due to the complicated fuzzy calculating rules. To solve this problem,this paper formulates a novel fuzzy mathematical model based on the process network graph and proposes a MultiSwarm Collaborative Optimization Algorithm (MSCOA) with an integrated encoding method to improve the optimization. Different swarms evolve in various directions and collaborate in a certain number of iterations. Moreover,the critical path searching method is introduced according to the triangular fuzzy number,allowing for the calculation of rules to enhance the local searching ability of MSCOA. The numerical experiments extended from the well-known Kim benchmark are conducted to test the performance of the proposed MSCOA. Compared with other competitive algorithms,the results obtained by MSCOA show significant advantages,thus proving its effectiveness in solving the FIPPS problem.
文摘Integrator processes with long delay are difficult to control. Nonlinear characteristics of actuators make the control problem more challenging. A technique is proposed in this paper for global satisfactory control (GSC) of such processes with relay-type nonlinearity. An oscillatory control signal is injected into the nonlinear process; the amplitude and frequency of the oscillatory signal are designed to linearise the nonlinear process in the sense of harmonic analysis; and a state feedback controller is configured to implement GSC over the linearised process. An illustrative example is given to demonstrate the effectiveness of
基金the National Natural Science Foundation of China under Grant No.20906063the Liaoning BaiQianWan Talents Program under Grant No.2018921046+1 种基金the Scientific Research Project of Liaoning Provincial Department of Education under Grant No.LJGD2020002the Shenyang Youth Science and Technology Project under Grant No.RC200325.
文摘This study presents an overview of the current status of hydrogen production in relation to the global requirement for energy and resources.Subsequently,it symmetrically outlines the advantages and disadvantages of various production routes including fossil fuel/biomass conversion,water electrolysis,microbial fermentation,and photocatalysis(PC),in terms of their technologies,economy,energy consumption,and costs.Considering the characteristics of hydrogen energy and the current infrastructure issues,it highlights that onsite production is indispensable and convenient for some special occasions.Finally,it briefly summarizes the current industrialization situation and presents future development and research directions,such as theoretical research strengthening,renewable raw material development,process coupling,and sustainable energy use.
基金This project was supported by the National Science Foundation for Distinguished Young Scholars (60625302)National "973" Basic Research Program of China (2002CB312200)+1 种基金National "863" High Technology Development Program (20060104Z1081) Major State Basic Research Development Program of Shanghai (05DJ14002).
文摘A robust tuning method for ο^Astroem's two-degree of Freedom Modified Smith Predictor (MSP) is proposed, and it can achieve the fast setpoint and load disturbance responses independently. The tuning rules may meet the requirements within a certain delay margin according to the robustness theory. The simulation results illustrate that the tuning method is efficient compared with other controllers. Finally, the MSP controller is applied to the 15L batch fermentation system for controlling the temperature in bioreactor, and the experiment results further verify that the robust tuning rules may achieve good performance.
基金the National "863" High Technology Development Program(2001AA413130).
文摘For several superior controllers of the first-order integrating processes with long delay, the windup problems are analyzed in detail when the control signal saturates. The results show that these controllers have similar characteristics about the process input limitation. And then, a simple and effective anti-windup scheme, without an additional parameter, is designed for these controllers. Simulations run with three main controllers, and the results illustrate that the proposed method may achieve good performance under the nominal and model uncertainty cases.
基金This work was supported by National Science Fundation of China (No.60274032)Specialized Research Fund for the Doctoral Program of Higher Education (SRFDP) (No.20030248040)and Alexander von Humboldt Research Fellowship
文摘The predictive model is built according to the characteristics of the impulse response of integrating process. In order to eliminate the permanent offset between the setpoint and the process output in the presence of the load disturbance, a novel error compensation method is proposed. Then predictive functional control of integrating process is designed. The method given generates a simple control structure, which can significandy reduce online computation. Furthermore, the tuning of the controller is fairly straightforward. Simulation results indicate that the designed control system is relatively robust to the parameters variation of the process.
基金National Defense Science Foundation of China (No.B0920060901)
文摘Process integration is the important aspect of product development process. The recent researches focus on project management, workflow management and process modeling. Based on the analysis of the process, product development process is divided into three levels according to different grains from macroscopy to microcosm. Our research concentrate on the workflow and the free-grained design process. According to the need of representing the data and the relationships among them for process integration, context model is introduced, and its characters are analyzed. The tree-like structure of inheritance among context model's classes is illustrated; The relationships of reference among them are also explained. Then, extensible markup language (XML) file is used to depict these classes. A four-tier framework of process integration has been established, in which model-view-controller pattern is designed to realize the separation between context model and its various views. The integration of applications is applied by the encapsulation of enterprise's business logic as distributed services. The prototype system for the design of air filter is applied in an institute.
基金National Natural Science Foundation of China(Nos.61971410,and 62001458)Shanghai Sailing Program(No.20YF1457100)。
文摘Exosomes are now raising focus as a prospective biomarker for cancer diagnostics and prognosis owing to its unique bio-origin and composition.Exosomes take part in cellular communication and receptor mediation and transfer their cargos(e.g.,proteins,m RNA and DNA).Quantitative analysis of tumor-related nucleic acid mutations can be a potential method to cancer diagnosis and prognosis in early stages.Here we present an integrated microfluidic system for exosome on-chip isolation and lung cancer RNA analysis through droplet digital PCR(dd PCR).Gradient dilution experiments show great linearity over a large concentration range with R^(2)=0.9998.Utilizing the system,four cell lines and two mutation targets were parallelly detected for mutation analysis.The experiments demonstrated mutation heterogeneity and the results were agree with cell researches.These results proved our integrated microfluidic system as a promising means for early cancer diagnosis and prognosis in the era of liquid biopsy.
文摘Expanded bed adsorption (EBA) has been introduced as a primary recovery step for protein purification from a whole fermentation broth or unclarified cell homogenates. It can also be integrated with a fermentation or cell disruption process. Solid matrix is the principal pillar supporting the successful application of the EBA technology. This article summarizes the solid matrices employed in and developed for the EBA process to date. Further development of solid matrices for the expanded bed technique in the recovery of various biological substances from different sources has been addressed.
基金supported by National Natural Science Foundation of China(No.90307014)
文摘One of today's challenges is the integration of ISFETs in chemical and biochemical Microsystems.This article presents a full integration of ISFET chip containing the ISFET/REFET(reference FET) pair,ISFET/REFET amplifiers,bias current generator,as well as a reference electrode structure,all integrated on the same chip based on CMOS technology.The sensor chip was fabricated in a standard 0.35μm CMOS process(Chartered Semiconductor,Singapore).The extra post processing steps have been developed and added for depositing membranes.Finally,the pH response of the integrated sensor was measured with the interface circuit.
基金National Defense Basic Research Foundation of China(No.D0420060521)
文摘To achieve information integration, process integration and application integration of enterprise, an enterprise integration platform (EIP) based on service-oriented architecture (SOA) is built. The enterprise integration model depending on encapsulating the business processes as well as the enterprise applications by the neutral and standard web services is presented. The problem how to discover the existed enterprise resources and share them was resolved depending on the mechanism of publishing and discovering the services. The EIP is integrated closely with product lifecycle management (PLM) system so that the process integration as well as orchestration of the business process services is implemented by encapsulating the workflow engine of PLM system. Not only process integration and application integration, but also information integration based on the bill of material (BOM) conversion driven by process are achieved. Finally, an interpretive, qualitative case study on EIP is conducted for this research.