High-Performance and Flexible Co-Planar Integrated Microsystem of Carbon-Based All-Solid-State Micro-Supercapacitor and Real-Time Temperature Sensor

With the rapid development of flexible and portable microelectronics,the extreme demand for miniaturized,mechanically flexible,and integrated microsystems are strongly stimulated.Here,biomass-derived carbons(BDCs)are prepared by KOH activation using Qamgur precursor,exhibiting three-dimensional(3D)hierarchical porous structure.Benefiting from unobstructed 3D hierarchical porous structure,BDCs provide an excellent specific capacitance of 433 F g^(-1)and prominent cyclability without capacitance degradation after 50000 cycles at 50 A g^(-1).Furthermore,BDC-based planar micro-supercapacitors(MSCs)without metal collector,prepared by mask-assisted coating,exhibit outstanding areal-specific capacitance of 84 mF cm^(-2)and areal energy density of 10.6μWh cm^(-2),exceeding most of the previous carbon-based MSCs.Impressively,the MSCs disclose extraordinary flexibility with capacitance retention of almost 100%under extreme bending state.More importantly,a flexible planar integrated system composed of the MSC and temperature sensor is assembled to efficiently monitor the temperature variation,providing a feasible route for flexible MSC-based functional micro-devices.

A Monolithic Integrated CMOS Thermal Vacuum Sensor

The monolithic integrated micro sensor is an important direction in the fields of integrated circuits and micro sensors. In this paper,a monolithic thermal vacuum sensor based on a micro-hotplate （MHP） and operating under constant bias voltage conditions was designed. A new monolithic integrating mode was proposed,in which the dielectric and passiva- tion layers in standard CMOS processes were used as sensor structure layers,gate polysilicon as the sacrificial layer,and the second polysilicon layer as the sensor heating resistor. Then, the fabricating processes were designed and the monolithic thermal vacuum sensor was fabricated with a 0. 6μm mixed signal CMOS process followed by sacrificial layer etching technology. The measurement results show that the fabricated monolithic vacuum sensor can measure the pressure range of 2- 10^5 Pa and the output voltage is adjustable.

Integrated Design and Accuracy Analysis of Star Sensor and Gyro on the Same Benchmark for Satellite Attitude Determination System

As an important sensor in the navigation systems,star sensors and the gyro play important roles in spacecraft attitude determination system.Complex environmental factors are the main sources of error in attitude determination.The error influence of different benchmarks and the disintegration mode between the star sensor and the gyro is analyzed in theory.The integrated design of the star sensor and the gyro on the same benchmark can effectively avoid the error influence and improves the spacecraft attitude determination accuracy.Simulation results indicate that when the stars sensor optical axis vectors overlap the reference coordinate axis of the gyro in the same benchmark,the attitude determination accuracy improves.

A novel voltage output integrated circuit temperature sensor

The novel integrated circuit (IC) temperature sensor presented in this paper works similarly as a two terminal Zener, has breakdown voltage directly proportional to Kelvin temperature at 10 mV/℃, with typical error of less than ±1.0℃ over a temperature range from -50℃ to +125℃. In addition to all the features that conventional IC temperature sensors have, the new device also has very low static power dissipation ( 0.5 mW ) , low output impedance ( less than 1Ω), excellent stability, high reproducibility, and high precision. The sensor's circuit design and layout are discussed in detail. Applications of the sensor include almost any type of temperature sensing over the range of -50℃-+125℃. The low impedance and linear output of the device make interfacing the readout or control circuitry especially easy. Due to the excellent performance and low cost of this sensor, more applications of the sensor over wide temperature range are expected.

Microarrow sensor array with enhanced skin adhesion for transdermal continuous monitoring of glucose and reactive oxygen species

Conventional blood sampling for glucose detection is prone to cause pain and fails to continuously record glucose fluctuations in vivo.Continuous glucose monitoring based on implantable electrodes could induce pain and potential tissue inflammation,and the presence of reactive oxygen species(ROS)due to inflammationmay affect glucose detection.Microneedle technology is less invasive,yet microneedle adhesion with skin tissue is limited.In this work,we developed a microarrow sensor array(MASA),which provided enhanced skin surface adhesion and enabled simultaneous detection of glucose and H_(2)O_(2)(representative of ROS)in interstitial fluid in vivo.The microarrows fabricated via laser micromachining were modified with functional coating and integrated into a patch of a three-dimensional(3D)microneedle array.Due to the arrow tip mechanically interlocking with the tissue,the microarrow array could better adhere to the skin surface after penetration into skin.The MASA was demonstrated to provide continuous in vivo monitoring of glucose and H_(2)O_(2) concentrations,with the detection of H_(2)O_(2) providing a valuable reference for assessing the inflammation state.Finally,the MASA was integrated into a monitoring system using custom circuitry.This work provides a promising tool for the stable and reliable monitoring of blood glucose in diabetic patients.

Polyimide Humidity Integrated Sensor Fabricated Using the MEMS Process

This paper reports on the fabrication and sensing characteristics of Polyimide-based humidity sensor,based on that,a new integrated circuit of humidity measurement has been designed.It is a novel capacitive-type systems on a chip structure using the MEMS process.The results show that the new sensor presents sensing characteristics over a humidity range from 10%～70% RH at 20℃,and the sensor is able to fabricated together with ICs technology.The result shows that integration of humidity sensor with integrated circuit of humidity measurement is considerably easier when they are built in sensing groove.The appeal of a new structure like this brings the possibility of applications that would require the flexibility of simple screen printing.

Integrated outburst detector sensor-model tests

Outbursts of methane and rocks are, similarly to rock bursts, the biggest hazards in deep mines and are equally difficult to predict. The violent process of the outburst itself, along with the scale and range of hazards following the rapid discharge of gas and rocks, requires solutions which would enable quick and unambiguous detection of the hazard, immediate power supply cut-off and evacuation of personnel from potentially hazardous areas. For this purpose, an integrated outburst detector was developed. Assumed functions of the sensor which was equipped with three measuring and detection elements： a chamber for constant measurement of methane concentration, pressure sensor and microphone. Tests of the sensor model were carried out to estimate the parameters which characterize the dynamic properties of the sensor. Given the impossibility of carrying out the full scale experimental outburst, the sensor was tested during the methane and coal dust explosions in the testing gallery at KD Barbara. The obtained results proved that the applied solutions have been appropriate.

Tightly-coupled model for INS/WSN integrated navigation based on Kalman filter

Aiming at the problem of poor observability of measurement information in the loosely-coupled integration of the inertial navigation system （INS） and the wireless sensor network （WSN）, this paper presents a tightly-coupled integration based on the Kalman filter （KF）. When the WSN is available, the difference between the distances from the blind node（BN） to the reference nodes （RNs） measured by the INS and those measured by the WSN are used as measurement information for the KF due to its better observability and independence, which can effectively improve the accuracy of the KF. Simulations show that the proposed approach reduces the mean error of the position by about 50% compared with loosely-coupled integration, while the mean error of the velocity is a little higher than that of loosely-coupled integration.

ACTIVE VIBRATION CONTROL AND SUPPRESSION FOR INTEGRATED STRUCTURES

The finite element dynamic model for integrated structures containing distributed piezoelectric sensors and actuators ( S/As ) is formulated with a new piezoelectric plate bending element in this paper. The problem of active vibration control and suppression of integrated structures is investigated under constant gain negative velocity feedback control law. A general method for active vibration control and suppression of integrated structures is presented. Finally, numerical example is given to illustrate the validity of the method proposed in this paper.

Fuzzy adaptive Kalman filter for indoor mobile target positioning with INS/WSN integrated method

Pure inertial navigation system(INS) has divergent localization errors after a long time. In order to compensate the disadvantage, wireless sensor network(WSN) associated with the INS was applied to estimate the mobile target positioning. Taking traditional Kalman filter(KF) as the framework, the system equation of KF was established by the INS and the observation equation of position errors was built by the WSN. Meanwhile, the observation equation of velocity errors was established by the velocity difference between the INS and WSN, then the covariance matrix of Kalman filter measurement noise was adjusted with fuzzy inference system(FIS), and the fuzzy adaptive Kalman filter(FAKF) based on the INS/WSN was proposed. The simulation results show that the FAKF method has better accuracy and robustness than KF and EKF methods and shows good adaptive capacity with time-varying system noise. Finally, experimental results further prove that FAKF has the fast convergence error, in comparison with KF and EKF methods.

Investigating Approaches of Data Integrity Preservation for Secure Data Aggregation in Wireless Sensor Networks

Wireless Sensor Networks (WSNs) typically use in-network processing to reduce the communication overhead. Due to the fusion of data items sourced at different nodes into a single one during in-network processing, the sanctity of the aggregated data needs to be ensured. Especially, the data integrity of the aggregated result is critical as any malicious update to it can jeopardize not one, but many sensor readings. In this paper, we analyse three different approaches to providing integrity support for SDA in WSNs. The first one is traditional MAC, in which each leaf node and intermediate node share a key with parent (symmetric key). The second is aggregate MAC (AMAC), in which a base station shares a unique key with all the other sensor nodes. The third is homomorphic MAC (Homo MAC) that is purely symmetric key-based approach. These approaches exhibit diverse trade-off in resource consumption and security assumptions. Adding together to that, we also propose a probabilistic and improved variant of homomorphic MAC that improves the security strength for secure data aggregation in WSNs. We carry out simulations in TinyOS environment to experimentally evaluate the impact of each of these on the resource consumption in WSNs.

PIR-based data integrity verification method in sensor network

Since a sensor node handles wireless communication in data transmission and reception and is installed in poor environment, it is easily exposed to certain attacks such as data transformation and sniffing. Therefore, it is necessary to verify data integrity to properly respond to an adversary's ill-intentioned data modification. In sensor network environment, the data integrity verification method verifies the final data only, requesting multiple communications. An energy-efficient private information retrieval(PIR)-based data integrity verification method is proposed. Because the proposed method verifies the integrity of data between parent and child nodes, it is more efficient than the existing method which verifies data integrity after receiving data from the entire network or in a cluster. Since the number of messages for verification is reduced, in addition, energy could be used more efficiently. Lastly, the excellence of the proposed method is verified through performance evaluation.

In-Pixel Charge Addition Scheme Applied in Time-Delay Integration CMOS Image Sensors

An addition scheme applicable to time-delay integration (TDI) CMOS image sensor is proposed,which adds signals in the charge domain in the pixel array.A two-shared pixel structure adopting two-stage charge transfer is introduced,together with the rolling shutter with an undersampling readout timing.Compared with the conventional TDI addition methods,the proposed scheme can reduce the addition operations by half in the pixel array,which decreases the power consumption of addition circuits outside the pixel array.The timing arrangement and pixel structure are analyzed in detail.The simulation results show that the proposed pixel structure can achieve the charge addition with negligible nonlinearity,therefore the power consumption of the periphery addition circuits can be reduced by half theoretically.

Fully On-Chip Integrated Photodetector Front-End Dedicated to Real-Time Portable Optical Brain Imaging

Optical brain imaging using functional near infra-red spectroscopy (fNIRS) offers a portable and noninvasive tool for monitoring of blood oxygenation. In this paper we have introduced a new miniaturized photodetector front-end on achip to be applied in a portable fNIRS system. It includes silicon avalanche photodiodes (SiAPD), Transimpedance amplifier (TIA) front-end and Quench-Reset circuitry to operate in both linear and Geiger modes. So it can be applied for both continuous-wave fNIRS (CW-fNIRS) and also single-photon counting. Proposed SiAPD exhibits high-avalanche gain (>100), low-breakdown voltage ( V) and high photon detection efficiency accompanying with low dark count rates. The proposed TIA front-end offer a low power consumption ( mW), high-transimpedance gain (up to 250 MV/A), tunable bandwidth (1 kHz - 1 GHz) and very low input and output noise (~few fA/√Hz and few μV/√Hz). The Geiger-mode photon counting front-end also exhibits a controllable hold-off and rest time with an ultra fast quench-reset time (few ns). This integrated system has been implemented using submicron (0.35 μm) standard CMOS technology.

Concealed Integrity Monitoring for Wireless Sensor Networks

Nowadays, sensor networks are widely installed around the world. Typical sensors provide data for healthcare, energy management, environmental monitoring, etc. In the future sensors will become a part of critical infrastructures. In such a scenario the network operator has to monitor the integrity of the network devices, otherwise the trustworthiness of the whole system is questionable. The problem is that every integrity protocol needs a secure channel between the devices. Therefore, we will introduce a covert channel for hidden transportation of integrity monitoring messages. The covert channel enables us to hide integrity check messages embedded into regular traffic without giving potential attackers a hint on the used integrity protocol.

基于激光传感器的机电一体化设备自动化控制系统

该文以提升机电一体化设备准确、快速控制为目标,设计基于激光传感器的机电一体化设备自动化控制系统。利用PC端发送机电一体化设备数据采集指令,采集当前设备实时运行数据后,将其发送到可编程逻辑控制器,对实时运行数据去噪预处理后,利用多目标设备协同控制方法,获得设备自动化控制指令,并利用得到的设备自动化控制指令控制机电一体化设备单片机执行动作,完成机电一体化设备自动化控制。实验结果表明,该系统具备较好的兼容性,采集机电一体化设备实时运行数据较为精准的同时,还可有效实现机电一体化设备自动化控制,控制灵敏度较好。

面向新型电力传感器的能量收集技术

电力传感器作为能源互联网的关键基础设施,其持续稳定的电力供应是保证能源互联网高效运行的前提。然而,传统供电方式存在诸多局限。全面梳理了面向新型电力传感器的能量收集技术,包括振动能量收集、温差能量收集、光伏能量收集和电磁能量收集等,这些技术利用环境中的分布式能源,通过不同的转换机理为传感器提供电力,有望解决供电难题。阐述了各种能量收集技术的应用现状,分析了目前所面临的关键技术挑战,如能量转换效率低、工作条件要求苛刻、器件可靠性和集成度有待提高等;探讨了未来能量收集技术的创新方向,包括开发新型高性能材料、优化器件结构设计、使用复合式收集技术等,以期实现更高的能量利用效率,满足新型电力传感器的实际需求,推动智能电网等相关领域的技术创新。

基于傅里叶变换的振动切削刀具振幅测量方法

振动切削在当今时代的制造业越来越普遍,而振动切削的关键参数刀具振幅又因能量损失而无法避免,为了能保证良好的切削效果,需要知道实际切削过程中的刀具振幅。目前普遍使用激光测振仪测量振动切削的刀具振幅,但设备较为昂贵。为了实现对振动切削刀具振幅经济有效的测量,提出了一种利用加速度传感器测量振动切削刀具振幅的测量方法。利用加速度传感器获得刀具振动方向的加速度,通过傅里叶变换和频域二次积分以及傅里叶反变换,将加速度信号积分为振幅信号。根据实验结果可知,本测量系统的测量误差低于0.8%。

基于EEMD与极限提升树的传感器故障诊断方法

传感器在工业互联等关键领域扮演着重要角色,通过故障诊断方法保障其数据的可靠性至关重要。本文提出一种基于EEMD与极限提升树的传感器故障诊断方法,以提高对传感器故障的准确识别和及时处理能力。该方法通过采集电压电流传感器数据,以故障注入方式建立数据集,利用EEMD对数据进行降噪与特征提取,并通过极限提升树进行训练,从而建立故障诊断模型。通过划分的验证集对所构建的模型进行验证。试验表明,该方法的测试准确性指标显著优于其他方法,至少高于次优方法11.95%的F1得分,能够更好地捕捉传感器数据的故障特征,具有较高的诊断准确率和较强的鲁棒性,且消耗较低、实用价值强,能够有力保障工业互联、玻璃智能制造等领域的数据准确性和安全性。

基于PLC控制下水肥一体化智能监控系统设计

水肥一体化系统通过实时监测土壤湿度、植物生长状态等参数,精确控制水肥供给,避免过量使用水和肥料,这对于解决水资源短缺和减少农业生产对肥料的依赖具有重要意义。通过深入分析PLC技术,基于西门子S7-1200作为控制核心,采用先进的传感器技术,实现了对土壤湿度、植物生长状态等关键参数的实时监测,通过智能设备,实时监测农田状态,并远程调整水肥系统的运行参数。试验结果表明,基于PLC控制的水肥一体化智能监控系统能够显著提高水肥利用率,减少资源浪费,降低生产成本,可以为农业生产提供一种先进、高效的管理方案,不仅有助于解决当前农业面临的水资源和肥料管理难题,也为实现可持续农业发展贡献重要的技术手段。