NEW ALGORITHM FOR RECEIVER AUTONOMOUS INTEGRITY MONITORING

A new integrity metric for navigation systems is proposed based on the measurement domain. Proba-hilistic optimization design offers tools for fault detection by considering the required navigation performance （RNP） parameter and the uncertainty noise. The choice of the proper performance parameter provided the single-valued mapping with the missed detection probability estimates the probability of failure. The desirable characteristics of the residual sensitivity matrix are exploited to increase the efficiency for identifying erroneous observations. The algorithm can be used to support the performance specification and the efficient calculation of the integrity monitoring process. The simulation for non-precision approach （NPA） validates both the viability and the effectiveness of the proposed algorithm.

Short-term warning and integrity monitoring algorithm for coal mine shaft safety

A new short-term warning and integrity monitoring algorithm was proposed for coal mine shaft safety. The Kalman filter (KF) model was used to extract real global positioning system (GPS) kinematic deformation information. The short-term warning model was built by using the two-side cumulative sum (CUSUM) test, which further improves the warning system reliability. Availability (the minimum warning deformation, MWD), false alarm rate (the average run length, ARL), missed rate (the warning delay, WD) and the relationships among them were analyzed and the method choosing warning parameters is given. A test of a deformation simulation platform shows that the warning algorithm can be effectively used for steep deformation warning. A field experiment of the Malan mine shaft in Shanxi coal area illustrates that the proposed algorithm can detect small dynamic changes and the corresponding occurring time. At given warning thresholds (MWD is 15 mm and ARL is 1000),the detected deformations of two consecutive days’ deformation sequences with the algorithm occur at the 705th epoch (705 s) and the 517th epoch (517 s), respectively.

GNSS receiver autonomous integrity monitoring(RAIM)algorithm based on robust estimation

Integrity is significant for safety-of-life applications. Receiver autonomous integrity monitoring（RAIM） has been developed to provide integrity service for civil aviation. At first,the conventional RAIM algorithm is only suitable for single fault detection, single GNSS constellation. However, multiple satellite failure should be considered when more than one satellite navigation system are adopted. To detect and exclude multi-fault, most current algorithms perform an iteration procedure considering all possible fault model which lead to heavy computation burden. An alternative RAIM is presented in this paper based on multiple satellite constellations（for example, GPS and Bei Dou（BDS） etc.） and robust estimation for multi-fault detection and exclusion, which can not only detect multi-failures,but also control the influences of near failure observation. Besides, the RAIM algorithm based on robust estimation is more efficient than the current RAIM algorithm for multiple constellation and multiple faults. Finally, the algorithm is tested by GPS/Bei Dou data.

GPS Vector Tracking Receivers with Rate Detector for Integrity Monitoring

In this paper,the integrity monitoring algorithm based on a Kalman filter(KF)based rate detector is employed in the vector tracking loop(VTL)of the Global Positioning System(GPS)receiver.In the VTL approach,the extended Kalman filter(EKF)simultaneously tracks the received signals and estimates the receiver’s position,velocity,etc.In contrast to the scalar tracking loop(STL)that uses the independent parallel tracking loop approach,the VTL technique uses the correlation of each satellite signal and user dynamics and thus reduces the risk of loss lock of signals.Although the VTL scheme provides several important advantages,the failure of tracking in one channel may affect the entire system and lead to loss of lock on all satellites.The integrity monitoring algorithm can be adopted for robustness enhancement.In general,the standard integrity monitoring algorithm can timely detect the step type erroneous signals.However,in the presence of ramp type slowly growing erroneous signals,detection of such type of error takes much more time since the error cannot be detected until the cumulative exceeds the specified threshold.The integrity monitoring based on the rate detector possesses good potential for resolving such problem.The test statistic based on the pseudorange residual in association with the EKF is applied for determination of whether the test statistic exceeds the allowable threshold values.The fault detection and exclusion(FDE)mechanism can then be employed to exclude the hazardous erroneous signals for the abnormal satellites to assure normal operation of GPS receivers.Feasibility of the integrity monitoring algorithm based on the EKF based rate detector will be demonstrated.Performance assessment and evaluation will be presented.

Concealed Integrity Monitoring for Wireless Sensor Networks

Nowadays, sensor networks are widely installed around the world. Typical sensors provide data for healthcare, energy management, environmental monitoring, etc. In the future sensors will become a part of critical infrastructures. In such a scenario the network operator has to monitor the integrity of the network devices, otherwise the trustworthiness of the whole system is questionable. The problem is that every integrity protocol needs a secure channel between the devices. Therefore, we will introduce a covert channel for hidden transportation of integrity monitoring messages. The covert channel enables us to hide integrity check messages embedded into regular traffic without giving potential attackers a hint on the used integrity protocol.

Multi‑level autonomous integrity monitoring method for multi‑source PNT resilient fusion navigation

For the integrity monitoring of a multi-source PNT(Positioning,Navigation,and Timing)resilient fusion navigation system,a theoretical framework of multi-level autonomous integrity monitoring is proposed.According to the mode of multi-source fusion navigation,the framework adopts the top-down logic structure and establishes the navigation source fault detection model based on the multi-combination separation residual method to detect and isolate the fault source at the system level and subsystem level.For isolated non-redundant navigation sources,the system level recovery verification model is used.For the isolated multi-redundant navigation sources,the sensor fault detection model optimized with the dimension-expanding matrix is used to detect and isolate the fault sensors,and the isolated fault sensors are verified in real-time.Finally,according to the fault detection and verification results at each level,the observed information in the fusion navigation solution is dynamically adjusted.On this basis,the integrity risk dynamic monitoring tree is established to calculate the Protection Level(PL)and evaluate the integrity of the multi-source integrated navigation system.The autonomous integrity monitoring method proposed in this paper is tested using a multi-source navigation system integrated with Inertial Navigation System(INS),Global Navigation Satellite System(GNSS),Long Baseline Location(LBL),and Ultra Short Baseline Location(USBL).The test results show that the proposed method can effectively isolate the fault source within 5 s,and can quickly detect multiple faulty sensors,ensuring that the positioning accuracy of the fusion navigation system is within 5 m,effectively improving the resilience and reliability of the multi-source fusion navigation system.

Integrity monitoring scheme for single-epoch GNSS PPP-RTK positioning

Integrity monitoring for precise point positioning is critical for safety-related applications.With the increasing demands of high-accuracy autonomous navigation for unmanned ground and aerial vehicles,the integrity monitoring method of high-precision positioning has become an essential requirement.While high precision Global Navigation Satellite Systems(GNSS)positioning is widely used in such applications,there are still many difculties in the integrity monitoring method for the multi-frequency multi-GNSS undiferenced and uncombined Precise Point Positioning(PPP).The main difculties are caused by using the measurements of multiple epochs in PPP.Based on the baseline Multiple Hypothesis Solution Separation(MHSS)Advanced Receiver Autonomous Integrity Monitoring(ARAIM)algorithm,this paper discusses the feasibility of the pseudorange-based baseline ARAIM method on the single-epoch PPP based on Real-Time Kinematic(RTK)networks(PPP-RTK)framework to overcome these difculties.In addition,a new scheme is proposed to transfer the conventional PPP process into the single-epoch PPP-RTK framework.The simulation results using the proposed model are analyzed in this study.The Protection Levels(PLs)estimated by PPP Wide-lane Ambiguity Resolution(PPP-WAR)model with regional corrections can reach the meter level and the PLs estimated by PPP Ambiguity Resolution(PPP-AR)and PPP-RTK models are usually the sub-meter level.Given a horizontal Alert Limit(AL)of 1.5 m,the global coverage of availability above 99.9%for PPP-WAR,PPP-AR,and PPP-RTK can reach 92.6%,99.4%,and 99.7%respectively.The results using real kinematic data also show that tight PLs can be achieved when the observation conditions are good.

Receiver Autonomous Integrity Monitoring Availability and Fault Detection Capability Comparison Between BeiDou and GPS

This paper used the statistical methods of quality control to assess receiver autonomous integrity monitoring(RAIM) availability and fault detection(FD) capability of BeiDou14(Phase II with 14 satellites),BeiDou(Phase III with 35 satellites) and GPS(with 31 satellites) for the first time. The three constellations are simulated and their RAIM performances are quantified by the global, Asia-Pacific region and temporal variations respectively. RAIM availability must be determined before RAIM detection. It is proposed that RAIM availability performances from satellites and constellation geometry configuration are evaluated by the number of visible satellites(NVS, NVS > 5) and geometric dilution of precision(GDOP, GDOP < 6) together. The minimal detectable bias(MDB) and minimal detectable effect(MDE) are considered as a measure of the minimum FD capability of RAIM in the measurement level and navigation position level respectively. The analyses of simulation results testify that the average global RAIM performances for BeiDou are better than that for GPS except global RAIM holes proportion. Moreover, the Asia-Pacific RAIM performances for BeiDou are much better than that for GPS in all indexes. RAIM availability from constellation geometry configuration and RAIM minimum FD capability for BeiDou14 are better than that for GPS in Asia-Pacific region in all cases, but the BeiDou14 RAIM availability from satellites are worse than GPS's. The methods and conclusions can be used for RAIM prediction and real-time assessment of all kinds of Global Navigation Satellite Systems(GNSS) constellation.

New methods for dual constellation single receiver positioning and integrity monitoring

Navigation system integrity monitoring is crucial for mission(e.g.safety)critical applications.Receiver autonomous integrity monitoring(RAIM)based on consistency checking of redundant measurements is widely used for many applications.However,there are many challenges to the use of RAIM associated with multiple constellations and applications with very stringent requirements.This paper discusses two positioning techniques and corresponding integrity monitoring methods.The first is the use of single frequency pseudorange-based dual constellations.It employs a new cross constellation single difference scheme to benefit from the similarities while addressing the differences between the constellations.The second technique uses dual frequency carrier phase measurements from GLONASS and the global positioning system for precise point positioning.The results show significant improvements both in positioning accuracy and integrity monitoring as a result of the use of two constellations.The dual constellation positioning and integrity monitoring algorithms have the potential to be extended to multiple constellations.

Real-time integrity monitoring for a wide area precise positioning system

The wide area precise positioning system(WAPPS)is a high-precision positioning system based on a global navigation satellite system.Using a GEO satellite or a communication network,it provides users,in its service area,with real-time satellite orbit,clock,and other corrections.Users can achieve centimeter-level static positioning or decimeter-level kinematic positioning by precise point positioning.With the demands for applications of both high-precision and safety of life in real time,WAPPS is facing urgent needs to improve its service integrity.This study presents a real-time integrity monitoring approach for WAPPS.Using dual-frequency ionosphere-free corrections of GPS and BDS,along with monitor station data,related error models are established and the integrity monitoring is achieved,based on the analysis of satellite corrected residuals.In addition,satellite faults are simulated for performance verification.The results show that the algorithm can monitor both step and drift faults effectively and alert users in time.

Developments and prospects of microseismic monitoring technology in underground metal mines in China

Microseismic monitoring technology has become an important technique to assess stability of rock mass in metal mines.Due to the special characteristics of underground metal mines in China,including the high tectonic stress,irregular shape and existence of ore body,and complex mining methods,the application of microseismic technology is more diverse in China compared to other countries,and is more challenging than in other underground structures such as tunnels,hydropower stations and coal mines.Apart from assessing rock mass stability and ground pressure hazards induced by mining process,blasting,water inrush and large scale goaf,microseismic technology is also used to monitor illegal mining,and track personnel location during rescue work.Moreover,microseismic data have been used to optimize mining parameters in some metal mines.The technology is increasingly used to investigate cracking mechanism in the design of rock mass supports.In this paper,the application,research development and related achievements of microseismic technology in underground metal mines in China are summarized.By considering underground mines from the perspective of informatization,automation and intelligentization,future studies should focus on intelligent microseismic data processing method,e.g.,signal identification of microseismic and precise location algorithm,and on the research and development of microseismic equipment.In addition,integrated monitoring and collaborative analysis for rock mass response caused by mining disturbance will have good prospects for future development.

Multimode Process Monitoring Based on Fuzzy C-means in Locality Preserving Projection Subspace

For complex industrial processes with multiple operational conditions, it is important to develop effective monitoring algorithms to ensure the safety of production processes. This paper proposes a novel monitoring strategy based on fuzzy C-means. The high dimensional historical data are transferred to a low dimensional subspace spanned by locality preserving projection. Then the scores in the novel subspace are classified into several overlapped clusters, each representing an operational mode. The distance statistics of each cluster are integrated though the membership values into a novel BID (Bayesian inference distance) monitoring index. The efficiency and effectiveness of the proposed method are validated though the Tennessee Eastman benchmark process.

Disaster reduction stick equipment: A method for monitoring and early warning of pipeline-landslide hazards

Oil and gas pipelines are of great importance in China,and pipeline security problems pose a serious threat to society and the environment.Pipeline safety has therefore become an integral part of the entire national economy.Landslides are the most harmful type of pipeline accident,and have directed increasing public attention to safety issues.Although some useful results have been obtained in the investigation and prevention of pipeline-landslide hazards,there remains a need for effective monitoring and early warning methods,especially when the complexity of pipeline-landslides is considered.Because oil and gas pipeline-landslides typically occur in the superficial soil layers,monitoring instruments must be easy to install and must cause minimal disturbance to the surrounding soil and pipeline.To address the particular characteristics of pipelinelandslides,we developed a multi-parameter integrated monitoring system called disaster reduction stick equipment.In this paper,we detail this monitoring and early warning system for pipeline-landslide hazards based on an on-site monitoring network and early warning algorithms.The functionality of our system was verified by its successful application to the Chongqing Loujiazhuang pipeline-landslide in China.The results presented here provide guidelines for the monitoring,early warning,and prevention of pipeline geological hazards.

Monitoring and simulation of water,heat,and CO_2 fluxes in terrestrial ecosystems based on the APEIS-FLUX system

The Integrated Environmental Monitoring (IEM) project, part of the Asia-Pacific Environmental Innovation Strategy (APEIS) project, developed an integrated environmental monitoring system that can be used to detect, monitor, and assess environmental disasters, degradation, and their impacts in the Asia-Pacific region. The system primarily employs data from the moderate resolution imaging spectrometer (MODIS) sensor on the Earth Observation System-(EOS-) Terra/Aqua satellite, as well as those from ground observations at five sites in different ecological systems in China. From the preliminary data analysis on both annual and daily variations of water, heat and CO2 fluxes, we can confirm that this system basically has been working well. The results show that both latent flux and CO2 flux are much greater in the crop field than those in the grassland and the saline desert, whereas the sensible heat flux shows the opposite trend. Different data products from MODIS have very different correspondence, e.g. MODIS-derived land surface temperature has a close correlation with measured ones, but LAI and NPP are quite different from ground measurements, which suggests that the algorithms used to process MODIS data need to be revised by using the local dataset. We are now using the APEIS-FLUX data to develop an integrated model, which can simulate the regional water, heat, and carbon fluxes. Finally, we are expected to use this model to develop more precise high-order MODIS products in Asia-Pacific region.

The integrated monitoring system for running parameters of key mining equipment based on condition monitoring technology

An integrated monitoring system for running parameters of key mining equipmenton the basis of condition monitoring technology and modern communication networktechnology was developed.The system consists of a client computer with functions ofsignal acquisition and processing, and a host computer in the central control room.Thesignal acquisition module of the client computer can collect the running parameters fromvarious monitoring terminals in real-time.The DSP high-speed data processing system ofthe main control module can quickly achieve the numerical calculation for the collectedsignal.The signal modulation and signal demodulation are completed by the frequencyshift keying circuit and phase-locked loop frequency circuit, respectively.Finally, the signalis sent to the host computer for logic estimation and diagnostic analysis using the networkcommunication technology, which is helpful for technicians and managers to control therunning state of equipment.

Research on Network-based Integrated Condition Monitoring Unit for Rotating Machinery

In this paper, a network-based monitoring unit for condition monitoring andfault diagnosis of rotating machinery is designed and implemented. With the technology of DSP(Digital signal processing) , TCP/IP, and simultaneous acquisition, a mechanism of multi-process andinter-process communication, the integrating problem of signal acquisition, the data dynamicmanagement and network-based configuration in the embedded condition monitoring system is solved. Itoffers the input function of monitoring information for network-based condition monitoring and afault diagnosis system.

Probing multi-physical process and deformation mechanism of a largescale landslide using integrated dual-source monitoring

The implementation of isolated heterologous monitoring systems for spatially distant borehole deployments often comes with substantial equipment costs,which can limit the effectiveness of geohazard mitigation and georisk management efforts.To address this,we have developed a novel monitoring system that integrates fiber Bragg grating(FBG)and microelectromechanical system(MEMS)techniques to capture soil moisture,temperature,sliding resistance,strain,surface tilt,and deep-seated inclination.This system enables real-time,simultaneous data acquisition and cross-validation analyses,offering a costeffective solution for monitoring critical parameters in geohazard-prone areas.We successfully applied this integrated monitoring system to the Xinpu landslide,an active super-large landslide located in the Three Gorges Reservoir Area(TGRA)of China.The resulting strain profile confirmed the presence of two shallow secondary sliding surfaces at depths of approximately 7 m and 12 m,respectively,in addition to the deep-seated sliding surface at a depth of28 m.The lower secondary sliding surface was activated by extreme precipitation,while the upper one was primarily driven by significant changes in reservoir water levels and secondarily triggered by concentrated rainfalls.Anti-slide piles have remarkably reinforced the upper moving masses but failed to control the lower ones.The gap between the pile heads and the soil amplified the rainwater erosion effect,creating a preferential channel for rainwater infiltration.Multi-physical measurements revealed a mixture of seepage-driven and buoyancy-driven behaviors within the landslide.This study offers an integrated dual-source multi-physical monitoring paradigm that enables collaborative management of multiple crucial boreholes on a large-scale landslide,and contributes to the evaluation and improvement of engineering measures in similar geological settings.

Development and engineering application of integrated safety monitoring systems for China’s high-speed trains

With the improvement of the running speed of China’s high-speed trains,the demands for running status monitoring and security assurance of High-speed Electric Multiple Units(EMU)have increased significantly.However,the current safety monitoring systems are independent,which is not conducive to the comprehensive monitoring and information sharing of the whole vehicle.The temperature monitoring of running gear is insensitive to early failures.How to develop a train operation safety monitoring system with strong engineering implementation and high integration is a key problem to be solved.For the monitoring of running stationarity,frame stability and running gear health of China’s high-speed trains,an integrated safety monitoring system framework is designed,and the logic and algorithm for the diagnosis of stationarity,stability and health states of rotating parts are constructed.Monitoring software which fused the temperature,high and low frequency vibration data is developed,and the design and installation of the vibration temperature composite sensors are completed.The research results have realized the integration and comprehensive processing of multiple monitoring systems,completed the improvement from single component and vehicle-level safety monitoring to multi-system,train-level and interactive monitoring.In the process of real vehicle application,the developed monitoring system acquires the vehicle operation status data accurately and in real time.The constructed diagnosis algorithm and logic evaluates the vehicle operation status accurately and in a timely manner,and avoids the progression from fault to accident.The research results show that the integrated safety monitoring system can provide technical support for train operation safety.

Clock-based RAIM method and its application in GPS receiver positioning

Because the signals of global positioning system （GPS） satellites are susceptible to obstructions in urban environment with many high buildings around, the number of GPS useful satellites is usually less than six. In this case, the receiver autonomous integrity monitoring （RAIM） method earmot exclude faulty satellite. In order to improve the performance of RAIM method and obtain the reliable positioning results with five satellites, the series of receiver clock bias （RCB） is regarded as one useful satellite and used to aid RAIM method. From the point of nonlinear series, a grey-Markov model for predicting the RCB series based on grey theory and Markov chain is presented. And then the model is used for aiding RAIM method in order to exclude faulty satellite. Experimental results demonstrate that the prediction model is fit for predicting the RCB series, and with the clock-based RAIM method the faulty satellite can be correctly excluded and the positioning precision of GPS receiver can be improved for the case where there are only five useful satellites.

Integrated Surveillance Method of Mosquitoes and Mosquito-borne Diseases

Monitoring on vector-borne virus lays foundation for control of vector-borne disease, and a scientific and highly-efficient surveil ance method is of great signifi-cance for prevention and control ing of vector-borne diseases. The research sum-marized mosquito and mosquito-borne disease monitoring methods and proposed problems in the monitoring system, as wel as introducing new monitoring methods at home and abroad, providing references for improvements of integrated surveil-lance of mosquito or mosquito-borne viruses.