A Double-Timescale Reinforcement Learning Based Cloud-Edge Collaborative Framework for Decomposable Intelligent Services in Industrial Internet of Things

With the proportion of intelligent services in the industrial internet of things(IIoT)rising rapidly,its data dependency and decomposability increase the difficulty of scheduling computing resources.In this paper,we propose an intelligent service computing framework.In the framework,we take the long-term rewards of its important participants,edge service providers,as the optimization goal,which is related to service delay and computing cost.Considering the different update frequencies of data deployment and service offloading,double-timescale reinforcement learning is utilized in the framework.In the small-scale strategy,the frequent concurrency of services and the difference in service time lead to the fuzzy relationship between reward and action.To solve the fuzzy reward problem,a reward mapping-based reinforcement learning(RMRL)algorithm is proposed,which enables the agent to learn the relationship between reward and action more clearly.The large time scale strategy adopts the improved Monte Carlo tree search(MCTS)algorithm to improve the learning speed.The simulation results show that the strategy is superior to popular reinforcement learning algorithms such as double Q-learning(DDQN)and dueling Q-learning(dueling-DQN)in learning speed,and the reward is also increased by 14%.

Intelligent emergency service system based on wireless sensor and actuator networks

An intelligent emergency service（ IES） system is designed for indoor environments based on a wireless sensor and actuator network（ WSAN） composed of a gateway, sensor nodes, and a multi-robot system（ MRS）. If the MRS receives accident alarm information, the group of robots will navigate to the accident sites and provide corresponding emergency services.According to the characteristics of the MRS, a distributed consensus formation protocol is designed, which can assure that the multiple robots arrive at the accident site in a specified formation. The prototype emergency service system was designed and implemented, and some relevant simulations and experiments were carried out. The results showthat the MRS can successfully provide emergency lighting and failure node replacement services when accidents happen. The effectiveness of the algorithm and the feasibility of the system are verified.

AN INTELLIGENT METHOD FOR REAL-TIME DETECTION OF DDOS ATTACK BASED ON FUZZY LOGIC

The paper puts forward a variance-time plots method based on slide-window mechanism tocalculate the Hurst parameter to detect Distribute Denial of Service(DDoS)attack in real time.Basedon fuzzy logic technology that can adjust itself dynamically under the fuzzy rules,an intelligent DDoSjudgment mechanism is designed.This new method calculates the Hurst parameter quickly and detectsDDoS attack in real time.Through comparing the detecting technologies based on statistics andfeature-packet respectively under different experiments,it is found that the new method can identifythe change of the Hurst parameter resulting from DDoS attack traffic with different intensities,andintelligently judge DDoS attack self-adaptively in real time.

Building an Intelligent Home Space for Service Robot Based on Multi-Pattern Information Model and Wireless Sensor Networks

This paper is concerned with constructing a prototype intelligent home environment for home service robot. In this environment, multi-pattern information can be represented by some intelligent artificial marks. Light-packs service robots can provide reliable and intelligent service by interacting with the environment through the wireless sensor networks. The intelligent space consists the following main components: smart devices with intelligent artificial mark;home server that connects the smart device and maintains the information through wireless sensor network;and the service robot that perform tasks in collaboration with the environment. In this paper, the multi-pattern information model is built, the construction of wireless sensor networks is presented, the smart and agilely home service is introduced. Fi- nally, the future direction of intelligent space system is discussed.

The ZigBee Based Wireless Sensor and Actor Network in Intelligent Space Oriented to Home Service Robot

In the study of intelligent space oriented to home service robot, an important technology is how to construct an communication network which has the characters of high reliability and easy building. In this paper, based on the characteristics of ZigBee protocol, ZigBee technology is used to construct a wireless sensor and actor network. Several intelligent services based on ZigBee wireless sensor and actor network are shown to certify the reliability of this communication network. ZigBee wireless sensor and actor network builds an information bridge for the components in the intelligent space, the spatially distributed devices are connected together seamlessly. With this network, robot can share the mass information in the intelligent space and improve its performance with 'light-packs', devices in intelligent space, such as lamp, curtain can be controlled autonomously.

Precise Point Positioning Technique with IGS Real-Time Service (RTS) for Maritime Applications

The maritime navigation accuracy requirements for radionavigation systems such as GPS are specified by the International Maritime Organization (IMO). Maritime navigation usually consists of three major phases identified as Ocean/Coastal/Port approach/Inland waterway, in port navigation and automatic docking with an accuracy requirement that ranges from 10 m to 0.1 m. With the advancement in autonomous GPS positioning techniques such as Precise Point Positioning (PPP) and with the advent of the new IGS-Real-Time-Service (RTS), it is necessary to assess the possibility of a wider role of the PPP-based positioning technique in maritime applications. This paper investigates the performance of an autonomous real-time PPP-positioning solution by using the IGS- RTS service for maritime applications that require an accurate positioning system. To examine the performance of the real-time IGS-RTS PPP-based technique for maritime applications, kinematic data from a dual frequency GPS receiver is investigated. It is shown that the real-time IGS-RTS PPP-based GPS positioning technique fulfills IMO requirements for maritime applications with an accuracy requirement ranges from 10 m for Ocean/Coastal/Port approach/Inland waterways navigation to 1.0 m for in port navigation but cannot fulfill the automatic docking application with an accuracy requirement of 0.10 m. To further investigate the real-time PPP-based GPS positioning technique, a comparison is made between the real-time IGS-RTS PPP-based positioning technique and the real-time PPP-based positioning by using the predicted part of the IGS Ultra-Rapid products and the real-time GPS positioning technique with the Wide Area Differential GPS service (WADGPS). It is shown that the IGS-RTS PPP-based positioning technique is superior to the IGS-Ultra-Rapid PPP-based and WADGPS-based positioning techniques.

Zigbee Based Wireless Sensor and Actuator Network for Service Robot Intelligent Space

Wireless sensor and actuator network is the key technology of service robot intelligent space. This paper is concerned with design and implementation of a ZigBee based wireless sensor and actuator network (hereinafter referred to as ZWSAN), which has been applied in our service robot intelligent space successfully. Firstly, a simplified ZigBee stack applied to ZWSAN is proposed and the primitives of the stack are illustrated after a short overview of ZigBee protocols. Then the implementation of hardware module and software stack is introduced in detail as well as several representative devices integrated into ZWSAN, including environmental sensors for environmental perception, home devices controllers for device control, embedded speech recognition module for speech control, IMU module for abnormal behaviors detection and laser robot control for service robot navigation. An application example is described to demonstrate how the devices in ZWSAN to provide service cooperatively. Finally, we conclude this paper and discuss the future directions.

Shared and Service-oriented CNC Machining System for Intelligent Manufacturing Process

To improve efficiency, reduce cost, ensure quality effectively, researchers on CNC machining have focused on virtual machine tool, cloud manufacturing, wireless manufacturing. However, low level of information shared among different systems is a common disadvantage. In this paper, a machining database with data evaluation module is set up to ensure integrity and update. An online monitoring system based on internet of things and multi-sensors ＂feel＂ a variety of signal features to ＂percept＂ the state in CNC machining process. A high efficiency and green machining parameters optimization system ＂execute＂ service-oriented manufacturing, intelligent manufacturing and green manufacturing. The intelligent CNC machining system is applied in production. CNC machining database effectively shares and manages process data among different systems. The prediction accuracy of online monitoring system is up to 98.8% by acquiring acceleration and noise in real time. High efficiency and green machining parameters optimization system optimizes the original processing parameters, and the calculation indicates that optimized processing parameters not only improve production efficiency, but also reduce carbon emissions. The application proves that the shared and service-oriented CNC machining system is reliable and effective. This research presents a shared and service-oriented CNC machining system for intelligent manufacturing process.

Implementation of Intelligent Network Service Logic

According to the features of Intelligent Network(IN)service logic,a method based ondata table to implement IN Service Logic is proposed.The method supports dynamic additionof IN service logic.

Towards Harmonization IEC61850 and Intelligent Agents: Characteristic Analysis of Service Tracking

IEC61850 is the most promising standard for design of power utility communication networks and automation systems. On the other hand multi-agent systems are attracting growing interest for different applications of power engineering. This paper presents the possibility that IEC61850 could be applied to build intelligent agents for power engineering applications. The paper investigates the correlation between IEC61850 and multi-agents and presents IEC61850 service tracking as a scenario. First, briefly introduces reporting and service tracking;then, investigates agents, intelligent agents and the characteristics of intelligent agents;last, analyzes the characteristics of service tracking and compares it with intelligent agents. And analysis shows that IEC61850 could be applied to build intelligent agents, which represents a significant step forward for MAS to apply in power engineering.

Intelligent identification and real-time warning method of diverse complex events in horizontal well fracturing

The existing approaches for identifying events in horizontal well fracturing are difficult, time-consuming, inaccurate, and incapable of real-time warning. Through improvement of data analysis and deep learning algorithm, together with the analysis on data and information of horizontal well fracturing in shale gas reservoirs, this paper presents a method for intelligent identification and real-time warning of diverse complex events in horizontal well fracturing. An identification model for "point" events in fracturing is established based on the Att-BiLSTM neural network, along with the broad learning system (BLS) and the BP neural network, and it realizes the intelligent identification of the start/end of fracturing, formation breakdown, instantaneous shut-in, and other events, with an accuracy of over 97%. An identification model for "phase" events in fracturing is established based on enhanced Unet++ network, and it realizes the intelligent identification of pump ball, pre-acid treatment, temporary plugging fracturing, sand plugging, and other events, with an error of less than 0.002. Moreover, a real-time prediction model for fracturing pressure is built based on the Att-BiLSTM neural network, and it realizes the real-time warning of diverse events in fracturing. The proposed method can provide an intelligent, efficient and accurate identification of events in fracturing to support the decision-making.

A Wireless Intelligent Business Laundry Service System

For the business washing machine industry, most are currently using traditional manual service (the way cost is high, inefficient, low degree of intelligence) of the status quo. The wireless intelligent business laundry service system based on ESP8266 communication module is developed, which has the Wechat payment function and realizes the automatic control service of the washing machine. Firstly, the laundry wireless terminal will send a laundry request to the laundry control center when the customer is ready to wash. Secondly, after receiving the laundry request, control center will send WeChat Public Accounts, idle washing machine number and charges, as well as laundry service time and other information back to the wireless terminal to generate payment QR code. And then the customer scans QR code, when the control center receives the information that payment is successful, the system will automatically control the washing machine to complete the laundry service work. After testing, the system has the advantages of accurate control, low energy consumption, strong stability, accurate data transmission, low cost, strong practicability, and is conducive to promoting the development of the business laundry industry.

Mobile Spatial Information Service Based on Intelligent Map Agent

This paper analyzes the existing spatial structure of mobile information services and the current new characteristics of the service, proposes a new service model. The model adopts a unified deployment solution of spatial data. It extends the spatial data management and lightweight computing to the embedded computing devices, and enhanced the service flexibility and scalability. The design of mobile side achieves the integration of spatial data management, mobile computing and wireless communication, and it can meet the various needs of spatial information mobile services. The paper introduces the composition of the new model and the key contents, and pointing out that this model is the inevitable trend of spatial information mobile services.

Real-Time Prediction Algorithm for Intelligent Edge Networks with Federated Learning-Based Modeling

Intelligent healthcare networks represent a significant component in digital applications,where the requirements hold within quality-of-service(QoS)reliability and safeguarding privacy.This paper addresses these requirements through the integration of enabler paradigms,including federated learning(FL),cloud/edge computing,softwaredefined/virtualized networking infrastructure,and converged prediction algorithms.The study focuses on achieving reliability and efficiency in real-time prediction models,which depend on the interaction flows and network topology.In response to these challenges,we introduce a modified version of federated logistic regression(FLR)that takes into account convergence latencies and the accuracy of the final FL model within healthcare networks.To establish the FLR framework for mission-critical healthcare applications,we provide a comprehensive workflow in this paper,introducing framework setup,iterative round communications,and model evaluation/deployment.Our optimization process delves into the formulation of loss functions and gradients within the domain of federated optimization,which concludes with the generation of service experience batches for model deployment.To assess the practicality of our approach,we conducted experiments using a hypertension prediction model with data sourced from the 2019 annual dataset(Version 2.0.1)of the Korea Medical Panel Survey.Performance metrics,including end-to-end execution delays,model drop/delivery ratios,and final model accuracies,are captured and compared between the proposed FLR framework and other baseline schemes.Our study offers an FLR framework setup for the enhancement of real-time prediction modeling within intelligent healthcare networks,addressing the critical demands of QoS reliability and privacy preservation.

Packet Scheduling Algorithm for Real-Time Services in Broadband WMAN

Packet scheduling algorithm is the key technology to guarantee Quality of Service (QoS) and balance the fairness between users in broadband Wireless Metropolitan Area Network (WMAN). Based on the research of Proportional Fairness (PF) algorithm and Modified Largest Weighted Delay First (M-LWDF) algorithm, a new packet scheduling algorithm for real-time services in broadband WMAN, called Enhanced M-LWDF (EM-LWDF), was proposed. The algorithm phases in new information to measure the load of service queues and updates the state parameters in real-time way, which remarkably improves system performance.Simulation results show that comparing with M-LWDF algorithm, the proposed algorithm is advantageous in performances of queuing delay and fairness while guaranteeing system throughput.

Evaluation of intelligent tourism information service capabilities:A case study of Hanzhong City

In the era of the rapid development of information technology,it is of great significance to study the combination of intelligent tourism industry and information industry and evaluate the intelligent tourism information service capabilities(ITISC).The purpose of this study is to explore a methodological approach of assessing ITISC,and offer insights into the theoretical investigation and practical development of ITISC.First,factor analysis is used to determine the object of intelligent tourism information service and the key evaluation items of ITISC.Next,analytic hierarchy process(AHP)is applied to the ITISC evaluation of Hanzhong City,a popular tourist attraction in China,as an example to verify the authenticity and operability of the index system.Then,importance-performance analysis is conducted to diagnose the strengths and weaknesses of Hanzhong City’s ITISC construction and some corresponding measures are put forward.The findings suggest that only through the improvement of tourism public database,the establishment of big data analysis system and the application of various forms of mobile intelligent terminal can achieve the generalization of tourism information,seamless,instant,precise and interactive,which will be the development goal of intelligent tourism information service.

Problems and Countermeasures of Intelligent Elderly Care Service in the Context of Fewer Children in China

With the intensification of population aging and the implementation of the three-child policy,the elderly care pressure of Chinese families continues to rise.Therefore,accelerating the construction of a new intelligent elderly care service model is an important measure to actively respond to population aging,ease the burden of family elderly care and promote high-quality economic development.In view of this,this study analyzed the intelligent elderly care service to explore the relevant countermeasures of the intelligent elderly care service in the context of fewer children.

Intelligent Mobile Platform for Patent Consulting Service

Intelligent patent consulting service platform is an integrated service platform based on Android and IOS operating system. It can achieve the customized service at the mobile end and can provide intelligent search service, intelligent service delivery, interactive learning and collaborative consulting and other multi-dimensional services, to meet the needs of a large number of users. This paper provides a mobile platform for the applicant side of the functional modules of the design.

Research on urban intelligent fashion advertising service model based on wearable devices

We are developing a novel wearable devices called the urban intelligent fashion advertising.Such system is mobile information devices capable of supporting remote communication and intelligent interaction between terminals.In this paper,we explore the possible functions of such a wearable devices and will present the service-based architecture combing the hardware and the software.This architecture involves two major parts.The first part is hardware design,which includes microcontroller,display part,communication module,and positioning system module.The second part is software design,which is a real-time interactive system that includes signal reception,position detection,and user workload assessment.Then,we use the interactive concept and interactive technology to construct the urban fashion advertising service model,and elaborate on its business model.Finally,we present sustainability development recommendations for the proposed service model.

S&S Intelligent Science and Technology: Super service for state-of-the-art quality

Jiangsu S&S Intelligent Science and Technology Co., Ltd., since its establishment in 1999, has been adhering to the enterprise tenet of “user-experienceimprovement centered”, and carrying forward the enterprise spirit of “being responsible, rule-abiding and excellent”. After 20 years of hard work, the company has gradually completed the international market industrial layout, with an annual production capacity of 5,000 electronic jacquard machines (jacquard sets) and 360,000 monthly jacquard electromagnetic components.“S&S” is regarded by the industry as the most competitive electronic jacquard brand in the world.