Intelligent Fractional-Order Controller for SMES Systems in Renewable Energy-Based Microgrid

An autonomous microgrid that runs on renewable energy sources is presented in this article.It has a supercon-ducting magnetic energy storage(SMES)device,wind energy-producing devices,and an energy storage battery.However,because such microgrids are nonlinear and the energy they create varies with time,controlling and managing the energy inside them is a difficult issue.Fractional-order proportional integral(FOPI)controller is recommended for the current research to enhance a standalone microgrid’s energy management and performance.The suggested dedicated control for the SMES comprises two loops:the outer loop,which uses the FOPI to regulate the DC-link voltage,and the inner loop,responsible for regulating the SMES current,is constructed using the intelligent FOPI(iFOPI).The FOPI+iFOPI parameters are best developed using the dandelion optimizer(DO)approach to achieve the optimum performance.The suggested FOPI+iFOPI controller’s performance is contrasted with a conventional PI controller for variations in wind speed and microgrid load.The optimal FOPI+iFOPI controller manages the voltage and frequency of the load.The behavior of the microgrid as a reaction to step changes in load and wind speed was measured using the proposed controller.MATLAB simulations were used to evaluate the recommended system’s performance.The results of the simulations showed that throughout all interruptions,the recommended microgrid provided the load with AC power with a constant amplitude and frequency.In addition,the required load demand was accurately reduced.Furthermore,the microgrid functioned incredibly well despite SMES and varying wind speeds.Results obtained under identical conditions were compared with and without the best FOPI+iFOPI controller.When utilizing the optimal FOPI+iFOPI controller with SMES,it was found that the microgrid performed better than the microgrid without SMES.

Intelligent Control and Maintenance Man-agement Integrated System Based on Multi-Agents for Coal-Preparation Plant

This paper discusses the progress of computer integrated processing （CIPS） of coal-preparation and then preserits an intelligence controlled production-process, device-maintenance and production-management system of coal- preparation based on multi-agents （IICMMS-CP）. The construction of the IICMMS-CP, the distributed network control system based on live intelligence control stations and the strategy of implementing distributed intelligence control system are studied in order to overcome the disadvantages brought about by the wide use of the PLC system by coaipreparation plants. The software frame, based on a Multi-Agent Intelligence Control and Maintenance Management integrated system, is studied and the implemention methods of IICMMS-CP are discussed. The characteristics of distributed architecture, cooperation and parallel computing meet the needs of integrated control of coal-preparation plants with large-scale spatial production distribution, densely-related processes and complex systems. Its application further improves the reliability and precision of process control, accuracy of fault identification and intelligence of production adjustment, establishes a technical basis for system integration and flexible production. The main function of the system has been tested in a coal-preparation plant to good effect in stabilizing product quality, improving efficiency and reducing consumption.

Intelligent Integrated Control of Underactuated Mechanical Systems with Second-order Nonholonomic Constraints

This paper describes an intelligent integrated control of an acrobot, which is an underactuated mechanical system with second-order nonholonomic constraints. The control combines a model-free fuzzy control, a fuzzy sliding-mode control and a model-based fuzzy control. The model-free fuzzy controller designed for the upswing ensures that the energy of the acrobot increases with each swing. Then the fuzzy sliding-mode controller is employed to control the movement that the acrobot enters the balance area from the swing-up area. The model-based fuzzy controller, which is based on a Takagi-Sugeno fuzzy model, is used to balance the acrobot. The stability of the fuzzy control system for balance control is guaranteed by a common symmetric positive matrix, which satisfies linear matrix inequalities.

Application of Intelligent Power Consumption Management and Control Technology in Enterprise Off-site Enforcement

Regarding the current difficulties in SME(small and medium enterprise)supervision,especially considering the problem that the emission reduction task cannot be effectively implemented under the off-site daily supervision and the new normal of epidemic prevention with control of heavily polluted weather,a new type of intelligent power management technology has been proposed.Power information collection equipment and intelligent data collection and transmission terminal are installed to collect power consumption information of enterprise production facilities and pollution control facilities,and their operating conditions are monitored in 24 h.Abnormal operation alarm and closed-loop disposal management are provided through the software platform.The practical application of power monitoring technology in Rizhao City proves that the system alarms accurately and monitors efficiently.On the one hand,it has improved the efficiency of daily supervision of the ecological environment department,and can accurately investigate and correct corporate pollution control violations.On the other hand,it has enriched environmental supervision methods to accurately control the implementation of emergency emission reduction measures.The application of this technology has realized the transformation from civil defense to technical defense,from random law enforcement to precise law enforcement,and from on-site law enforcement to off-site law enforcement in the supervision of polluting enterprises in the jurisdiction,creating a new mode of off-site law enforcement for enterprises.

Research on the Construction Mode of Mechanical and Electrical Integration of Intelligent Control System based on Multi-agent Technique

In this paper, we conduct research on the construction mode of mechanical and electrical integration of intelligent control system based on the multi-agent technique. The development of the modem science and technology has greatly promoted the cross of different subjects and infiltration, caused the technological transformation and revolution in the field of engineering. In the field of mechanical engineering, because of rapid development of microelectronics technology and computer technology to the mechanical industry and its mechanical and electrical integration, which is formed by the penetration of the technology of mechanical industry structure, product, organization, function and structure, mode of the production and management system, great changes have taken place in industrial production by the mechanical electrification ＂ushered in the development of＂ mechatronics ＂as the characteristics of the stage. Our research combines the multi-agent technique to propose the new paradigm for mechanical and electrical integration which is innovative.

Research on Active Safety Methodologies for Intelligent Railway Systems

Safety is essential when building a strong transportation system.As a key development direction in the global railway system,the intelligent railway has safety at its core,making safety a top priority while pursuing the goals of efficiency,convenience,economy,and environmental friendliness.This paper describes the state of the art and proposes a system architecture for intelligent railway systems.It also focuses on the development of railway safety technology at home and abroad,and proposes the active safety method and technology system based on advanced theoretical methods such as the in-depth integration of cyber–physical systems(CPS),data-driven models,and intelligent computing.Finally,several typical applications are demonstrated to verify the advancement and feasibility of active safety technology in intelligent railway systems.

Development of Energy Management System for Micro Grid Operation

The introduction of several small and large-scale industries,malls,shopping complexes,and domestic applications has significantly increased energy consumption.The aim of the work is to simulate a technically viable and economically optimum hybrid power system for residential buildings.The proposed micro-grid model includes four power generators:solar power,wind power,Electricity Board(EB)source,and a Diesel Generator(DG)set,with solar and wind power performing as major sources and the EB supply and DG set serving as backup sources.The core issue in direct current to alternate current conversion is harmonics distortion,a five-stage multilevel inverter is employed with the assistance of an intelligent control system is simulated and the optimum system configuration is estimated to reduce harmonics and improve the power quality.The monthly demand for residential buildings is 13-15 Megawatts.So,almost 433 Kilo-Watts(KW)of electricity is required every day,and if it is used for 8 h per day,50-60 KW of electricity is needed per hour.The overall micro-grid model’s operation and performance are established using MATLAB/SIMULINK software,and simulation results are provided.The simulation results show that the developed system is both cost-effective and environment friendly resulting in yearly cost reductions.

A Task-Resource Joint Management Model with Intelligent Control for Mission-Aware Dispersed Computing

Dispersed computing can link all devices with computing capabilities on a global scale to form a fully decentralized network,which can make full use of idle computing resources.Realizing the overall resource allocation of the dispersed computing system is a significant challenge.In detail,by jointly managing the task requests of external users and the resource allocation of the internal system to achieve dynamic balance,the efficient and stable operation of the system can be guaranteed.In this paper,we first propose a task-resource joint management model,which quantifies the dynamic transformation relationship between the resources consumed by task requests and the resources occupied by the system in dispersed computing.Secondly,to avoid downtime caused by an overload of resources,we introduce intelligent control into the task-resource joint management model.The existence and stability of the positive periodic solution of the model can be obtained by theoretical analysis,which means that the stable operation of dispersed computing can be guaranteed through the intelligent feedback control strategy.Additionally,to improve the system utilization,the task-resource joint management model with bi-directional intelligent control is further explored.Setting control thresholds for the two resources not only reverse restrains the system resource overload,but also carries out positive incentive control when a large number of idle resources appear.The existence and stability of the positive periodic solution of the model are proved theoretically,that is,the model effectively avoids the two extreme cases and ensure the efficient and stable operation of the system.Finally,numerical simulation verifies the correctness and validity of the theoretical results.

Embedded integrated servo-controllers for intelligent modular actuators

This paper focuses on the development of an embedded integrated servo-controller （EISC） for servomotors. Comprising of mainly servo-controller and servo-amplifiers, this EISC is capable of controlling a wide range of servomotors to perform complieated tasks. Hence, integration of this EISC with a servomotor forms an intelligent modular actuator （IMA） that is essential to modern manufacturing industries. The development of such an EISC involves two major tasks： first, designing the hardware of a compact-sized and highly compatible EISC, and second, developing the software functions to facilitate its functionalities and capahilities. The developed EISC hence forms an integrated-servo-eontrol module, which determines the capability, functionality, flexibility and responsiveness of these IMAs.

Current status and construction scheme of smart geothermal field technology

To address the key problems in the application of intelligent technology in geothermal development,smart application scenarios for geothermal development are constructed.The research status and existing challenges of intelligent technology in each scenario are analyzed,and the construction scheme of smart geothermal field system is proposed.The smart geothermal field is an organic integration of geothermal development engineering and advanced technologies such as the artificial intelligence.At present,the technology of smart geothermal field is still in the exploratory stage.It has been tested for application in scenarios such as intelligent characterization of geothermal reservoirs,dynamic intelligent simulation of geothermal reservoirs,intelligent optimization of development schemes and smart management of geothermal development.However,it still faces many problems,including the high computational cost,difficult real-time response,multiple solutions and strong model dependence,difficult real-time optimization of dynamic multi-constraints,and deep integration of multi-source data.The construction scheme of smart geothermal field system is proposed,which consists of modules including the full database,intelligent characterization,intelligent simulation and intelligent optimization control.The connection between modules is established through the data transmission and the model interaction.In the next stage,it is necessary to focus on the basic theories and key technologies in each module of the smart geothermal field system,to accelerate the lifecycle intelligent transformation of the geothermal development and utilization,and to promote the intelligent,stable,long-term,optimal and safe production of geothermal resources.

Integrative Stability Analysis for A Class of Intelligent Control Systems

In this paper the integrative stability is studied for a class of intelligent control systems which are described by an octette structural model. Based on the definitions Of state reachability and stabilizability of intelligent control systems the analysis method and criterion of integrative stability are given.

Exploration of the Path of Intelligent Development of Continuing Education in the Digital Age

With the rapid development of big data and intelligent technology,opportunities and challenges coexist in continuing education work,and the integration of continuing education and intelligent education is imperative.Therefore,China’s continuing education should strengthen the construction of the education system,make long-term plans,strengthen overall management in system construction,promote the transformation of continuing education models,and accelerate the modernization process of education.Based on this,this article analyzes and studies the path of intelligent development of continuing education in the digital era,explores its inevitability,analyzes the main characteristics of intelligent continuing education,explores the problems of intelligent development of continuing education,and proposes strategies for the intelligent development of continuing education.

Whole-Process Project Cost Management Based on Building Information Modeling (BIM)

The whole-process project cost management based on building information modeling(BIM)is a new management method,aiming to realize the comprehensive optimization and improvement of project cost management through the application of BIM technology.This paper summarizes and analyzes the whole-process project cost management based on BIM,aiming to explore its application and development prospects in the construction industry.Firstly,this paper introduces the role and advantages of BIM technology in engineering cost management,including information integration,data sharing,and collaborative work.Secondly,the paper analyzes the key technologies and methods of the whole-process project cost management based on BIM,including model construction,data management,and cost control.In addition,the paper also discusses the challenges and limitations of the whole-process BIM project cost management,such as the inconsistency of technical standards,personnel training,and consciousness change.Finally,the paper summarizes the advantages and development prospects of the whole-process project cost management based on BIM and puts forward the direction and suggestions for future research.Through the research of this paper,it can provide a reference for construction cost management and promote innovation and development in the construction industry.

Neural Network-Powered License Plate Recognition System Design

The development of scientific inquiry and research has yielded numerous benefits in the realm of intelligent traffic control systems, particularly in the realm of automatic license plate recognition for vehicles. The design of license plate recognition algorithms has undergone digitalization through the utilization of neural networks. In contemporary times, there is a growing demand for vehicle surveillance due to the need for efficient vehicle processing and traffic management. The design, development, and implementation of a license plate recognition system hold significant social, economic, and academic importance. The study aims to present contemporary methodologies and empirical findings pertaining to automated license plate recognition. The primary focus of the automatic license plate recognition algorithm was on image extraction, character segmentation, and recognition. The task of character segmentation has been identified as the most challenging function based on my observations. The license plate recognition project that we designed demonstrated the effectiveness of this method across various observed conditions. Particularly in low-light environments, such as during periods of limited illumination or inclement weather characterized by precipitation. The method has been subjected to testing using a sample size of fifty images, resulting in a 100% accuracy rate. The findings of this study demonstrate the project’s ability to effectively determine the optimal outcomes of simulations.

New battery management system for multi-cell li-ion battery packs

This paper proposes a new battery management system （BMS） based on a master-slave control mode for multi-cell li-ion battery packs. The proposed BMS can be applied in li-ion battery packs with any cell number. The whole system is composed of a master processor and a string of slave manager cells （SMCs）. Each battery cell corresponds to an SMC. Unlike the conventional BMS, the proposed one has a novel method for communication, and it collects the battery status information in a direct and simple way. An SMC communicates with its adjacent counterparts to transfer the battery information as well as the commands from the master processor. The nethermost SMC communicates with the master processor directly. This method allows the battery management chips to be implemented in a standard CMOS （ complementary metal-oxide-semiconductor transistor） process. A testing chip is fabricated in the CSMC 0.5 μm 5 V N-well CMOS process. The testing results verify that the proposed method for data communication and the battery management system can protect and manage multi-cell li-ion battery packs.

Prospects of key technologies of integrated energy systems for rural electrification in China

Owing to increasing environmental concerns and resource scarcity, integrated energy system shave become widely used in communities. Rural energy systems, as one of the important links of the energy network in China, suffer from low energy efficiency and weak infrastructure. Therefore, it is particularly important to increase the proportion of electricity consumption and build an integrated energy system for rural electrification in China(IESREIC) with a rural distribution network as the core, in line with national conditions. In this study, by analyzing the Chinese regional differences and natural resource endowments, the development characteristics of the IESREIC are summarized. Then, according to the existing rural energy problems, key technologies are proposed for the IESREIC, such as those for planning and operation, value sharing, infrastructure, and a management and control platform. Finally, IESREIC demonstration projects and business models are introduced for agricultural production, rural industrial systems, and rural life. The purpose is to propose research concepts for the IESREIC, provide suggestions for the development of rural energy, and provide a reference for the construction of rural energy systems in countries with characteristics similar to those of China.

Reliability Management for Information System

An integrated intelligent management is presented to help organizations manage many heterogeneous resources in their information system. A general architecture of management for information system reliability is proposed, and the architecture from two aspects, process model and hierarchical model, described. Data mining techniques are used in data analysis. A data analysis system applicable to real-time data analysis is developed by improved data mining on the critical processes. The framework of the integrated management for information system reliability based on real-time data mining is illustrated, and the development of integrated and intelligent management of information system discussed.

Key Technologies and Development Trends in Advanced Intelligent Sawing Equipments

As a starting point in equipment manufacturing,sawing plays an important role in industrial production.Intelligent manufacturing equipment is an important carrier of intelligent manufacturing technologies.Due to the backwardness of intelligent technology,the comprehensive performance of sawing equipments in China is obviously different from that in foreign countries.State of the art of advanced sawing equipments is investigated along with the technical bottleneck of sawing machine tool manufacturing,and a new industrial scheme of replacing turning-milling by sawing is described.The key technologies of processing-measuring integrated control,multi-body dynamic optimization,the collaborative sawing network framework,the distributed cloud sawing platform,and the self-adapting service method are analyzed;with consideration of the problems of poor processing control stableness,low single machine intelligence level,no on-line processing data service and active flutter suppression of sawing with wide-width and heavy-load working conditions.Suggested directions for further research,industry implementation,and industry-research collaboration are provided.

Integrated Automation System for Rare Earth Countercurrent Extraction Process

Lower automation level in industrial rare-earth extraction processes results in high production cost, inconsistent product quality and great consumption of resources in China. An integrated automation system for extraction process of rare earth is proposed to realize optimal product indices, such as product purity,recycle rate and output. The optimal control strategy for output component, structure and function of the two-gradcd integrated automation system composed of the process management grade and the process control grade were discussed. This system is successfully applied to a HAB yttrium extraction production process and was found to provide optimal control, optimal operation, optimal management and remarkable benefits.

Farmer Participatory Evaluation of Nursery Bed Treatments for the Control of Root-Knot Nematodes [Meloidogynejavanica （Treub） Chitwood and Meloidogyne incognita （Kofoid and White） Chitwood] in Smallholder Farms in Kenya

Root-knot nematodes （Meloidogvne spp.） constrain the production of high value vegetable crops, such as tomato, on smallholder farms in Kenya. For several years, control of root-knot nematodes largely depended on the use of synthetic nematicides, most of which have been banned due to their toxicity to humans and the environment. Farmer-participatory trials were established, for two consecutive growing seasons on farmers＇ fields infested with root-knot nematodes （A4eloidogvne javanica and Meloidogyne incognita）, at two sites in central Kenya （Maragua and Kirinyaga districts）, representing two contrasting group of farmers （low-input and high-input）. The trials aimed at evaluating the potential of using biological control agents （BCAs）, i.e. Poehonia ehlamydosporia and Pasteuria penetrans, antagonistic plants （Crotalaria grahamiana and Tagetes minuta）, ＂＇trash burning＂ and chemical control （dazomet 98% = Basamid~ Granular） in the management of root-knot nematodes in tomato nursery beds, and quantify the associated net benefits, compared to an untreated control. Crotalaria grahamiana, ＂trash burning＂ and dazomet, significantly （P 〈 0.05） reduced the number of second-stage juveniles （J2s） of the root-knot nematodes in the soil in nursery beds during the first season at Karigui-ini, but there was no significant （P 〉 0.05） increase in yield after transplanting tomato seedlings from the respective treatment. Similarly, one of the BCAs （P. ehlamydosporia）, was effectively transferred to the field with seedlings from the BCA-treated nursery beds, but there was no significant （P 〉 0.05） increase in yield due to slow proliferation of the BCA, after transplanting. Participatory partial budgets were successfully developed with srnallholder farmers, and proved to be a vital tool in making informed decisions on management options for root-knot nematodes. In general, labour was considered by all farmers as the major input that contributed to the overall additional cost of the different treatments at both sites. This necessitates improvement in efficiency of labour resource use.