Effects of anode material on the evolution of anode plasma and characteristics of intense electron beam diode

In this paper,three kinds of materials including graphite,titanium(Ti)and molybdenum(Mo)are used as anodes to figure out the influence factors of anode material on the characteristics of the intense electron beam diode.The results show that the characteristics of diode are mainly determined by the cathode plasma motion under a 15 mm diode gap,in which the typical electron beam parameters are 280 kV,3.5 kA.When the diode gap is reduced to 5 mm,the voltage of the electron beam reduces to about 200 kV,and its current increases to more than 8.2 kA.It is calculated that the surface temperatures of Ti and Mo anodes are higher than their melting points.The diode plasma luminescence images show that Ti and Mo anodes produce plasmas soon after the bombardment of electron beams.Ti and Mo lines are respectively found in the plasma composition of Ti and Mo anode diodes.Surface melting traces are also observed on Ti and Mo anodes by comparing the micromorphologies before and after bombardment of the electron beam.These results suggest that the time of anode plasma generation is closely related to the anode material.Compared with graphite,metal Ti and Mo anodes are more likely to produce large amounts of plasma due to their more significant temperature rise effect.According to the moment that anode plasma begins to generate,the average expansion velocities of cathode and anode plasma are estimated by fitting the improved space-charge limited flow model.This reveals that generation and motion of the anode plasma significantly affect the characteristics of intense electron beam diode.

Effect of longitudinal applied magnetic field on the self-pinched critical current in intense electron beam diode

The effect of applied longitudinal magnetic field on the self-pinched critical current in the intense electron beam diode is discussed. The self-pinched critical current is derived and its validity is tested by numerical simulations. The results shows that an applied longitudinal magnetic field tends to increase the self-pinched critical current. Without the effect of anode plasma, the maximal diode current approximately equals the self-pinched critical current with the longitudinal magnetic field applied; when self-pinched occurs, the diode current approaches the self-pinched critical current.

Theoretical investigation of an electron beam propagating through a wide gap cavity

This paper presents a self-consistent nonlinear theory of the current and energy modulations when an electron beam propagates through an inductively-loaded wide gap cavity. The integro-differential equations axe obtained to describe the modulation of the beam current and kinetic energy. A relativistic klystron amplifier （RKA） model is introduced, which uses an inductively-loaded wide gap cavity as an input cavity. And a numerical code is developed for the extended model based on the equations, from which some relations about the modulated current and modulated energy are numerically given.

The Propagation Characteristics of the Electron Beam with Initial Modulation

The propagation characteristics of the beam under various initial conditions are in-vestigated by means of PIC method.The influences of density modulation and velocity modulationon the propagation characteristics are discussed and compared.The results reveal that by chang-iug the amplitude of the two kinds of modulations and the phase difference between them,the

Forward acceleration and generation of femtosecond megaelectronvolt electron beams by an ultrafast intense laser pulse

We present a new mechanism of energy gain of electrons accelerated by a laser pulse. It is shown that when the intensity of an Tiltrafast intense laser pulse decreases rapidly along the direction of propagation, electrons leaving the pulse experience an action of ponderomotive deceleration at the descending part of a lower-intensity laser field than acceleration at the ascending part of a high-intensity field, thus gain net energy from the pulse and move directly forward. By means of such a mechanism, a megaelectronvolt electron beam with a bunch length shorter than 100 fs could be realized with an ultrafast (≤30 fs), intense (≥1019 W/cm2) laser pulse.

Using a pre-kicker to ensure safe extractions from the HEPS storage ring

The High Energy Photon Source(HEPS)is a 6 GeV diffraction-limited storage ring light source under construction.The swap-out injection is adopted with the depleted bunch recycled via high-energy accumulation in the booster.The extremely high beam energy density of the bunches with an ultra-low emittance(about 30 pm horizontally and 3 pm vertically)and high bunch charges(from 1.33 to 14.4 nC)extracted from the storage ring could cause hazardous damage to the extraction Lambertson magnet in case of extraction kicker failure.To this end,we proposed the use of a pre-kicker to spoil the bunches prior to extraction,significantly reducing the maximum beam energy density down to within a safe region while still maintaining highly efficient extractions.The main parameters of the pre-kicker are simulated and discussed.

Relation between space-charge-limiting current and electric field enhancement factor at curved surface cathode

A two-dimensional solution of space-charge-limiting current for a high current vacuum diode with a spherical cathode is presented. The relation between space-charge-limiting current and electric field enhancement factor at the cathode surface for the diode with a curved surface cathode is also discussed. It is shown that compared with the current given by the conventional Child-Langmuir law, which describes the one-dimensional space-charege-limiting current, the two-dimensional space-charge-limiting current in such a diode is enhanced due to the electric-field enhancement along the cathode surface. Among practical parameter ranges, enhancement factor ηb approximately satisfies ηb Aβn, where β is the electric field enhancement factor at the cathode surface, and n is a constant between 1 and 2, which is confirmed to be universal for the diodes with curved surface cathodes.