Genetic relationships of eight species of genus Betula were evaluated using ISSR marks. A total of 236 loci were generated from 17 ISSR primers. Percentage of polymorphic bands (PPB) varied from 5.93 to 19.92. The hig...Genetic relationships of eight species of genus Betula were evaluated using ISSR marks. A total of 236 loci were generated from 17 ISSR primers. Percentage of polymorphic bands (PPB) varied from 5.93 to 19.92. The highest and the lowest level of genetic differentiation were detected in B. ovalifolia and B. maximowicziana Regel respectively. In these eight species, genetic diversity of birch (HT) was 24.38 %, and the genetic variation (GST ) interspecies was accounting for 79.36% of total genetic variation. According to the cluster results of genetic distance, the eight species were classified into three groups as B. davurica, B. ovalifolia, B. platyphylla and B. pendula for one group; B. schmidtii, B. costata and B. ermanii Cham. var. communis for one group, and B. maximowicziana Regel for another group. The result of cluster is consistent with traditional morphological classification.展开更多
Internet key exchange (IKE) is an automated key exchange mechanism that is used to facilitate the transfer of IPSec security associations (SAs). Public key infrastructure (PKI) is considered as a key element for provi...Internet key exchange (IKE) is an automated key exchange mechanism that is used to facilitate the transfer of IPSec security associations (SAs). Public key infrastructure (PKI) is considered as a key element for providing security to new distributed communication networks and services. In this paper, we concentrate on the properties of the protocol of Phase 1 IKE. After investigating IKE protocol and PKI technology, we combine IKE protocol and PKI and present an implementation scheme of the IKE based on PKI. Then, we give a logic analysis of the proposed protocol with the BAN-logic and discuss the security of the protocol. The result indicates that the protocol is correct and satisfies the security requirements of Internet key exchange.展开更多
A technique was developed to study mass trans fer process and inter facial reaction in two phases system. This constant inter facial cell with a laminar flow was made into a cubic structure. The two fluids were contin...A technique was developed to study mass trans fer process and inter facial reaction in two phases system. This constant inter facial cell with a laminar flow was made into a cubic structure. The two fluids were continuously recycled and mixed. The concentration of each liquid could be monitored by two different methods. This kind of structure made both flows near the inter face flow parallel to the inter face. The inter face was smooth and steady. The mass trans fer rate could be judged by the linear velocity of the flows. The technique can be used for the analyses of the control step in both phases near the inter face in a diffusion control process. A preliminary hydrodynamics and mass trans fer study on the cell was presented, which ensures the distinguishing between a diffusion and a chemical reaction control process. A simplified mass transfer equation,N =0.5303D 1 /2* (Ci- Cb)* (V / B) 1/2, was achieved.展开更多
A general regression neural network model,combined with an interative algorithm(GRNNI)using sparsely distributed samples and auxiliary environmental variables was proposed to predict both spatial distribution and vari...A general regression neural network model,combined with an interative algorithm(GRNNI)using sparsely distributed samples and auxiliary environmental variables was proposed to predict both spatial distribution and variability of soil organic matter(SOM)in a bamboo forest.The auxiliary environmental variables were:elevation,slope,mean annual temperature,mean annual precipitation,and normalized difference vegetation index.The prediction accuracy of this model was assessed via three accuracy indices,mean error(ME),mean absolute error(MAE),and root mean squared error(RMSE)for validation in sampling sites.Both the prediction accuracy and reliability of this model were compared to those of regression kriging(RK)and ordinary kriging(OK).The results show that the prediction accuracy of the GRNNI model was higher than that of both RK and OK.The three accuracy indices(ME,MAE,and RMSE)of the GRNNI model were lower than those of RK and OK.Relative improvements of RMSE of the GRNNI model compared with RK and OK were 13.6%and 17.5%,respectively.In addition,a more realistic spatial pattern of SOM was produced by the model because the GRNNI model was more suitable than multiple linear regression to capture the nonlinear relationship between SOM and the auxiliary environmental variables.Therefore,the GRNNI model can improve both prediction accuracy and reliability for determining spatial distribution and variability of SOM.展开更多
The aim of this study was to determine the relationship between inter canine width (ICW) and inter alar width (IAW), inter commissural width (ICoW), and inter canthal distance (ICaD) in Bantu population. Materials and...The aim of this study was to determine the relationship between inter canine width (ICW) and inter alar width (IAW), inter commissural width (ICoW), and inter canthal distance (ICaD) in Bantu population. Materials and Methods: It was a pilot study included all participants who were aged at least 18 years, without a history of orthodontics treatment from Prosthodontics Department, Faculty of Dental Medicine, University of Kinshasa. The Ethics committee of the National Center of Research for Dental Sciences in DR Congo approved the study protocol (CNRSB 1504.218). The participants medical records were obtained from the interview and dental examination. Nature of the study was explained with participant information sheet, and an informed consent of all participants was obtained. The inclusion criteria were no missing maxillary and mandibular teeth, no diastema, and no anterior restorations, 18 years old before enrollment in the study. The exclusion criteria were inability to meet the above requirements, pregnancy, and refusal to participate in the study. The inter-canine width (ICW), inter alar width (IAW), inter canthal distance (ICaD) and inter-commissural width (ICoW) of each participant were measured with a digital Vernier caliper (Mitutoyo, UK Ltd.,) (0.01 mm) three times and the average value was recorded. The inter canthal distance (ICaD) was measured without applying pressure by bringing the recording parts of the caliper just in contact with the medial angle. The inter alar width (IAW) was marked with a fine marked pencil on the widest outer surface of the alae of the nose on either side or width. Those two points were measured without applying pressure by bringing the recording parts of the caliper just in contact with the outer surface. The participant was told to stop breathing shortly to avoid any change in shape of the nose. The inter-commissural width (ICoW) was determined by measuring the maxillary lip vermilion from commissure to commissure without the application of pressure on the tissue in the relaxed state. The inter-canine width (ICW) was measured indirectly using a dental floss. A dental floss was marked on one end prior to placement in the mouth. Using that point as reference, the dental floss was circumference along the curvature of the anterior dentition such that it passed along the contact point of all the teeth. The distal end of the canine teeth on both sides was then marked on the floss while it was stretched in the patients mouth. Floss was marked on both sides with the marker pencil. The distance between the two proximal contact points was measured and recorded. Data, analysis and validation were performed by the SPSS software (version 22.0, IBM SPSS Statistics, Chicago, IL, USA). Unpaired t-test was used, of Kolmogorov-Smirnov test. Analysis of variance (ANOVA) test was used to test for comparability between socio-demographic characteristics dental measurements. Pearsons correlation coefficients test was calculated to determine the relationship between facial and dental parameters. Significance was set at P 0.01. Results: Of 314 participants enrolled, 202 were included. The age ranged from 18 to 68 years, with a mean age of 40.62 12.99 years. Although the Pearsons correlation coefficients were negative. Ninety-three participants (46%) were men and one hundred and nine (54%) were women. The overall mean age was 40.62 12.99 years. Facial and dental measurements were greater in women than men with significant differences for ICW (p = 0.04). However, no significant difference was seen between men and women for IAW, ICaD and ICoW (p = 0.44, p = 0.23, p = 0.31 respectively). The correlation including Pearsons correlation coefficient and P-values for all participants is not demonstrated. Conclusion: Within the limitations of this study, the results suggest that IAW, ICaD and ICoW cannot be used as a preliminary method for determining the width of the maxillary for anterior teeth for edentulous patients.展开更多
When designing a solar power plant, it is much more important to avoid the shadow on the PV Panels. As the shadow falls on the PV Panels;it significantly reduces the generation of required power as planned and designe...When designing a solar power plant, it is much more important to avoid the shadow on the PV Panels. As the shadow falls on the PV Panels;it significantly reduces the generation of required power as planned and designed. This research paper and case study will help a lot to avoid shadow, especially when selecting inter-row spacing between the strings of solar power plants.展开更多
Generation of Product Concept needs to give full play to the designers' innovative potential and collaborative work of experts in different fields. However, the collaborative innovative capabilities of geographica...Generation of Product Concept needs to give full play to the designers' innovative potential and collaborative work of experts in different fields. However, the collaborative innovative capabilities of geographically distributed designers are often limited and hindered by space and time. Therefore, on the basis of the requirements analysis of Internet based collaborative conceptual design and the research work we have done, this paper proposes the overall framework of supporting collaborative conceptual design on Internet. Based on this overall framework, the authors further put forward collaborative conceptual design process model that includes three stages: concept generation, concept communication and optimal product concept selection. At the end of the paper, the experiment environment of collaborative design is described. The overall framework and collaborative conceptual design process model proposed can take full advantage of Internet and give full play to experts' experiences and wisdom, so that the rapid development and innovative design of product can be provided with effectively and efficiently implemental mode and support on Internet.展开更多
基金This paper was supported by Northeast Forestry University.
文摘Genetic relationships of eight species of genus Betula were evaluated using ISSR marks. A total of 236 loci were generated from 17 ISSR primers. Percentage of polymorphic bands (PPB) varied from 5.93 to 19.92. The highest and the lowest level of genetic differentiation were detected in B. ovalifolia and B. maximowicziana Regel respectively. In these eight species, genetic diversity of birch (HT) was 24.38 %, and the genetic variation (GST ) interspecies was accounting for 79.36% of total genetic variation. According to the cluster results of genetic distance, the eight species were classified into three groups as B. davurica, B. ovalifolia, B. platyphylla and B. pendula for one group; B. schmidtii, B. costata and B. ermanii Cham. var. communis for one group, and B. maximowicziana Regel for another group. The result of cluster is consistent with traditional morphological classification.
文摘Internet key exchange (IKE) is an automated key exchange mechanism that is used to facilitate the transfer of IPSec security associations (SAs). Public key infrastructure (PKI) is considered as a key element for providing security to new distributed communication networks and services. In this paper, we concentrate on the properties of the protocol of Phase 1 IKE. After investigating IKE protocol and PKI technology, we combine IKE protocol and PKI and present an implementation scheme of the IKE based on PKI. Then, we give a logic analysis of the proposed protocol with the BAN-logic and discuss the security of the protocol. The result indicates that the protocol is correct and satisfies the security requirements of Internet key exchange.
文摘A technique was developed to study mass trans fer process and inter facial reaction in two phases system. This constant inter facial cell with a laminar flow was made into a cubic structure. The two fluids were continuously recycled and mixed. The concentration of each liquid could be monitored by two different methods. This kind of structure made both flows near the inter face flow parallel to the inter face. The inter face was smooth and steady. The mass trans fer rate could be judged by the linear velocity of the flows. The technique can be used for the analyses of the control step in both phases near the inter face in a diffusion control process. A preliminary hydrodynamics and mass trans fer study on the cell was presented, which ensures the distinguishing between a diffusion and a chemical reaction control process. A simplified mass transfer equation,N =0.5303D 1 /2* (Ci- Cb)* (V / B) 1/2, was achieved.
基金The article is supported by National Key Research and Development Projects of P.R.China(No.2018YFD0600100).
文摘A general regression neural network model,combined with an interative algorithm(GRNNI)using sparsely distributed samples and auxiliary environmental variables was proposed to predict both spatial distribution and variability of soil organic matter(SOM)in a bamboo forest.The auxiliary environmental variables were:elevation,slope,mean annual temperature,mean annual precipitation,and normalized difference vegetation index.The prediction accuracy of this model was assessed via three accuracy indices,mean error(ME),mean absolute error(MAE),and root mean squared error(RMSE)for validation in sampling sites.Both the prediction accuracy and reliability of this model were compared to those of regression kriging(RK)and ordinary kriging(OK).The results show that the prediction accuracy of the GRNNI model was higher than that of both RK and OK.The three accuracy indices(ME,MAE,and RMSE)of the GRNNI model were lower than those of RK and OK.Relative improvements of RMSE of the GRNNI model compared with RK and OK were 13.6%and 17.5%,respectively.In addition,a more realistic spatial pattern of SOM was produced by the model because the GRNNI model was more suitable than multiple linear regression to capture the nonlinear relationship between SOM and the auxiliary environmental variables.Therefore,the GRNNI model can improve both prediction accuracy and reliability for determining spatial distribution and variability of SOM.
文摘The aim of this study was to determine the relationship between inter canine width (ICW) and inter alar width (IAW), inter commissural width (ICoW), and inter canthal distance (ICaD) in Bantu population. Materials and Methods: It was a pilot study included all participants who were aged at least 18 years, without a history of orthodontics treatment from Prosthodontics Department, Faculty of Dental Medicine, University of Kinshasa. The Ethics committee of the National Center of Research for Dental Sciences in DR Congo approved the study protocol (CNRSB 1504.218). The participants medical records were obtained from the interview and dental examination. Nature of the study was explained with participant information sheet, and an informed consent of all participants was obtained. The inclusion criteria were no missing maxillary and mandibular teeth, no diastema, and no anterior restorations, 18 years old before enrollment in the study. The exclusion criteria were inability to meet the above requirements, pregnancy, and refusal to participate in the study. The inter-canine width (ICW), inter alar width (IAW), inter canthal distance (ICaD) and inter-commissural width (ICoW) of each participant were measured with a digital Vernier caliper (Mitutoyo, UK Ltd.,) (0.01 mm) three times and the average value was recorded. The inter canthal distance (ICaD) was measured without applying pressure by bringing the recording parts of the caliper just in contact with the medial angle. The inter alar width (IAW) was marked with a fine marked pencil on the widest outer surface of the alae of the nose on either side or width. Those two points were measured without applying pressure by bringing the recording parts of the caliper just in contact with the outer surface. The participant was told to stop breathing shortly to avoid any change in shape of the nose. The inter-commissural width (ICoW) was determined by measuring the maxillary lip vermilion from commissure to commissure without the application of pressure on the tissue in the relaxed state. The inter-canine width (ICW) was measured indirectly using a dental floss. A dental floss was marked on one end prior to placement in the mouth. Using that point as reference, the dental floss was circumference along the curvature of the anterior dentition such that it passed along the contact point of all the teeth. The distal end of the canine teeth on both sides was then marked on the floss while it was stretched in the patients mouth. Floss was marked on both sides with the marker pencil. The distance between the two proximal contact points was measured and recorded. Data, analysis and validation were performed by the SPSS software (version 22.0, IBM SPSS Statistics, Chicago, IL, USA). Unpaired t-test was used, of Kolmogorov-Smirnov test. Analysis of variance (ANOVA) test was used to test for comparability between socio-demographic characteristics dental measurements. Pearsons correlation coefficients test was calculated to determine the relationship between facial and dental parameters. Significance was set at P 0.01. Results: Of 314 participants enrolled, 202 were included. The age ranged from 18 to 68 years, with a mean age of 40.62 12.99 years. Although the Pearsons correlation coefficients were negative. Ninety-three participants (46%) were men and one hundred and nine (54%) were women. The overall mean age was 40.62 12.99 years. Facial and dental measurements were greater in women than men with significant differences for ICW (p = 0.04). However, no significant difference was seen between men and women for IAW, ICaD and ICoW (p = 0.44, p = 0.23, p = 0.31 respectively). The correlation including Pearsons correlation coefficient and P-values for all participants is not demonstrated. Conclusion: Within the limitations of this study, the results suggest that IAW, ICaD and ICoW cannot be used as a preliminary method for determining the width of the maxillary for anterior teeth for edentulous patients.
文摘When designing a solar power plant, it is much more important to avoid the shadow on the PV Panels. As the shadow falls on the PV Panels;it significantly reduces the generation of required power as planned and designed. This research paper and case study will help a lot to avoid shadow, especially when selecting inter-row spacing between the strings of solar power plants.
文摘Generation of Product Concept needs to give full play to the designers' innovative potential and collaborative work of experts in different fields. However, the collaborative innovative capabilities of geographically distributed designers are often limited and hindered by space and time. Therefore, on the basis of the requirements analysis of Internet based collaborative conceptual design and the research work we have done, this paper proposes the overall framework of supporting collaborative conceptual design on Internet. Based on this overall framework, the authors further put forward collaborative conceptual design process model that includes three stages: concept generation, concept communication and optimal product concept selection. At the end of the paper, the experiment environment of collaborative design is described. The overall framework and collaborative conceptual design process model proposed can take full advantage of Internet and give full play to experts' experiences and wisdom, so that the rapid development and innovative design of product can be provided with effectively and efficiently implemental mode and support on Internet.
