As an independent sand control unit or a common protective shell of a high-quality screen,the punching screen is the outermost sand retaining unit of the sand control pipe which is used in geothermal well or oil and g...As an independent sand control unit or a common protective shell of a high-quality screen,the punching screen is the outermost sand retaining unit of the sand control pipe which is used in geothermal well or oil and gas well.However,most screens only consider the influence of the internal sand retaining medium parameters in the sand control performance design while ignoring the influence of the plugging of the punching screen on the overall sand retaining performance of the screen.To explore the clogging mechanism of the punching screen,this paper established the clogging mechanism calculation model of a single punching screen sand control unit by using the computational fluid mechanics-discrete element method(CFD-DEM)combined method.According to the combined motion of particles and fluids,the influence of the internal flow state on particle motion and accumulation was analyzed.The results showed that(1)the clogging process of the punching sand control unit is divided into three stages:initial clogging,aggravation of clogging and stability of clogging.In the initial stage of blockage,coarse particles form a loose bridge structure,and blockage often occurs preferentially at the streamline gathering place below chamfering inside the sand control unit.In the stage of blockage intensification,the particle mass develops into a relatively complete sand bridge,which develops from both ends of the opening to the center of the opening.In the stable plugging stage,the sand deposits show a“fan shape”and form a“V-shaped”gully inside the punching slot element.(2)Under a certain reservoir particle-size distribution,The slit length and opening height have a large influence on the permeability and blockage rate,while the slit width size has little influence on the permeability and blockage rate.The microscopic clogging mechanism and its law of the punching screen prevention unit are proposed in this study,which has some field guidance significance for the design of punching screen and sand prevention selection.展开更多
Solid-liquid suspension in stirred tank is a common operation in the chemical industry. The power consumption, flow pattern and flow field instability of three systems named as unbaffled stirred tank, traditional baff...Solid-liquid suspension in stirred tank is a common operation in the chemical industry. The power consumption, flow pattern and flow field instability of three systems named as unbaffled stirred tank, traditional baffled stirred tank and punched baffled stirred tank(Pun-BST) were studied by using the computational fluid dynamic analysis. Results showed that perforating holes in the baffles could reduce power consumption of mixing. Meanwhile, the punched baffle system could maintain the solids in suspension as traditional baffle system. The results also showed that the baffles could increase the “effective flow” of stirred tank even though the whole velocity of the vessel is lower than un-baffled vessel. In addition, both the solid-liquid suspension and “effective flow” were related to instability of the flow field.Perfect solid-liquid suspension results always along with obvious instability of the flow field. But, the strengthening effect of punched baffle on flow field instability mainly happened in the near-wall area.It's because the collision and aggregation among sub-streams induced by holes intensified the unstable fluid flow. On the whole, the Pun-BST system provided much better mixing characteristics and recommended to apply in the industrial process.展开更多
To accurately describe the mechanical properties of aluminium alloy sheet during deformation, an inverse identification was presented to deal with material parameters from the popular punch stretch test. In the identi...To accurately describe the mechanical properties of aluminium alloy sheet during deformation, an inverse identification was presented to deal with material parameters from the popular punch stretch test. In the identification procedure, the optimization strategy combines finite element method （FEM）, Latin hypercube sampling （LHS）, Kriging model and multi-island genetic algorithm （MIGA）. The proposed approach is used on material parameter identification of aluminium alloy sheet 2D12. The anisotropic yield criterion Hill’90 is discussed. The results show that the Hill’90 anisotropic yield criterion with identified anisotropic material parameters has a good potential in describing the anisotropic behaviours. It provides a way to obtain the material parameters for FE simulations of sheet metal forming.展开更多
文摘As an independent sand control unit or a common protective shell of a high-quality screen,the punching screen is the outermost sand retaining unit of the sand control pipe which is used in geothermal well or oil and gas well.However,most screens only consider the influence of the internal sand retaining medium parameters in the sand control performance design while ignoring the influence of the plugging of the punching screen on the overall sand retaining performance of the screen.To explore the clogging mechanism of the punching screen,this paper established the clogging mechanism calculation model of a single punching screen sand control unit by using the computational fluid mechanics-discrete element method(CFD-DEM)combined method.According to the combined motion of particles and fluids,the influence of the internal flow state on particle motion and accumulation was analyzed.The results showed that(1)the clogging process of the punching sand control unit is divided into three stages:initial clogging,aggravation of clogging and stability of clogging.In the initial stage of blockage,coarse particles form a loose bridge structure,and blockage often occurs preferentially at the streamline gathering place below chamfering inside the sand control unit.In the stage of blockage intensification,the particle mass develops into a relatively complete sand bridge,which develops from both ends of the opening to the center of the opening.In the stable plugging stage,the sand deposits show a“fan shape”and form a“V-shaped”gully inside the punching slot element.(2)Under a certain reservoir particle-size distribution,The slit length and opening height have a large influence on the permeability and blockage rate,while the slit width size has little influence on the permeability and blockage rate.The microscopic clogging mechanism and its law of the punching screen prevention unit are proposed in this study,which has some field guidance significance for the design of punching screen and sand prevention selection.
基金supported by the National Natural Science Foundation of China (22078030, Z20200804)National Key Research and Development Program of China (2019YFC1905802)+1 种基金Key Project of Independent Research Project of State Key Laboratory of Coal Mine Disaster Dynamics and Control (2011DA105287zd201902)Hubei Three Gorges Laboratory Open/Innovation Fund (SK211009, SK215001)。
文摘Solid-liquid suspension in stirred tank is a common operation in the chemical industry. The power consumption, flow pattern and flow field instability of three systems named as unbaffled stirred tank, traditional baffled stirred tank and punched baffled stirred tank(Pun-BST) were studied by using the computational fluid dynamic analysis. Results showed that perforating holes in the baffles could reduce power consumption of mixing. Meanwhile, the punched baffle system could maintain the solids in suspension as traditional baffle system. The results also showed that the baffles could increase the “effective flow” of stirred tank even though the whole velocity of the vessel is lower than un-baffled vessel. In addition, both the solid-liquid suspension and “effective flow” were related to instability of the flow field.Perfect solid-liquid suspension results always along with obvious instability of the flow field. But, the strengthening effect of punched baffle on flow field instability mainly happened in the near-wall area.It's because the collision and aggregation among sub-streams induced by holes intensified the unstable fluid flow. On the whole, the Pun-BST system provided much better mixing characteristics and recommended to apply in the industrial process.
基金Project(2011YSKF01)supported by the Henan Key Laboratory of Advanced Non-ferrous Metals,ChinaProject(50905008)supported by the National Natural Science Foundation of China
文摘To accurately describe the mechanical properties of aluminium alloy sheet during deformation, an inverse identification was presented to deal with material parameters from the popular punch stretch test. In the identification procedure, the optimization strategy combines finite element method （FEM）, Latin hypercube sampling （LHS）, Kriging model and multi-island genetic algorithm （MIGA）. The proposed approach is used on material parameter identification of aluminium alloy sheet 2D12. The anisotropic yield criterion Hill’90 is discussed. The results show that the Hill’90 anisotropic yield criterion with identified anisotropic material parameters has a good potential in describing the anisotropic behaviours. It provides a way to obtain the material parameters for FE simulations of sheet metal forming.
