In the present investigation, Ni_（50）Ti_（25）Al_（25）（at.%） mechanically alloyed powder is deposited on carbon steel substrate.Before the coating process, the substrate is heated to temperature ranging from room...In the present investigation, Ni_（50）Ti_（25）Al_（25）（at.%） mechanically alloyed powder is deposited on carbon steel substrate.Before the coating process, the substrate is heated to temperature ranging from room temperature to 400℃. The microstructure, porosity, microhardness, adhesion strength, and corrosion behavior of the coating are investigated at different substrate temperatures. Results show that coating porosity is lower on high temperature surface. Microhardness and adhesion strength of the deposition layer on the substrate without preheating have lower values than with preheating. The polarization test result shows that corrosion performance of the coating is dependent on micro cracks and porosities and the increasing of substrate temperature can improve the quality of coating and corrosion performance.展开更多
A micromechanical model is presented to study the initiation and propagation of microcracks of intermetallic compounds(IMCs)in solder joints.The effects of the grain aggregate morphology,the grain boundary defects and...A micromechanical model is presented to study the initiation and propagation of microcracks of intermetallic compounds(IMCs)in solder joints.The effects of the grain aggregate morphology,the grain boundary defects and the sensitivity of the various cohesive zone parameters in predicting the overall mechanical response are investigated.The overall strength is predominantly determined by the weak grain interfaces;both the grain aggregate morphology and the weak grain interfaces control the crack configuration;the different normal and tangential strengths of grain interfaces result in different intergranular cracking behaviors and play a critical role in determining the macroscopic mechanical response of the system.展开更多
The microstructures of the brazed joints for commercially pure Ti and stainless steel were investigated by the applications of various filler alloys including Ag-, Ti-, Zr- and Ni-based alloys. Generally, the dissimil...The microstructures of the brazed joints for commercially pure Ti and stainless steel were investigated by the applications of various filler alloys including Ag-, Ti-, Zr- and Ni-based alloys. Generally, the dissimilar joints between Ti and stainless steel were dominated by the Ti-based intermetallic compounds （IMCs）, e.g. （Ti, Zr）2（Fe, Ni）, TiFe, TiCu, and Ti2（Fe, Ni）, due to a significant dissolution of Ti from the base metal. The （Fe-Cr） cr phase was also observed near the stainless steel due to a segregation of Cr into the interface region. This research demonstrates empirically that the brittleness of the Ti and stainless steel joint can not be avoided only by applying single braze alloy or single insert metal, and thus an introduction of additional suitable interlayer between the filler alloy and the base metal is necessary to prevent the brittleness of the joint.展开更多
This work briefly describes some of the different features of groups of metals.It highlights recent progress in research into metals.It details the structures and defects in solid metals.The common theories of metals ...This work briefly describes some of the different features of groups of metals.It highlights recent progress in research into metals.It details the structures and defects in solid metals.The common theories of metals including the free electron theory,band theory,the ions in a sea of electrons model and the soft sphere model are discussed and their merits are considered.It describes distinctions between the bonding in metals and inter-metallic compounds.It shows the influence of bonding on the properties of metals and alloys and provides a summary of tradition and newer uses of metals.展开更多
文摘In the present investigation, Ni_（50）Ti_（25）Al_（25）（at.%） mechanically alloyed powder is deposited on carbon steel substrate.Before the coating process, the substrate is heated to temperature ranging from room temperature to 400℃. The microstructure, porosity, microhardness, adhesion strength, and corrosion behavior of the coating are investigated at different substrate temperatures. Results show that coating porosity is lower on high temperature surface. Microhardness and adhesion strength of the deposition layer on the substrate without preheating have lower values than with preheating. The polarization test result shows that corrosion performance of the coating is dependent on micro cracks and porosities and the increasing of substrate temperature can improve the quality of coating and corrosion performance.
基金supported by the NationalNatural Science Foundation of China (NSFC) under Grant 11872078,and Beijing Natural Science Foundation No.3222005.
文摘A micromechanical model is presented to study the initiation and propagation of microcracks of intermetallic compounds(IMCs)in solder joints.The effects of the grain aggregate morphology,the grain boundary defects and the sensitivity of the various cohesive zone parameters in predicting the overall mechanical response are investigated.The overall strength is predominantly determined by the weak grain interfaces;both the grain aggregate morphology and the weak grain interfaces control the crack configuration;the different normal and tangential strengths of grain interfaces result in different intergranular cracking behaviors and play a critical role in determining the macroscopic mechanical response of the system.
基金supported by the Korea Atomic Energy Research Institute (KAERI) R&D Program
文摘The microstructures of the brazed joints for commercially pure Ti and stainless steel were investigated by the applications of various filler alloys including Ag-, Ti-, Zr- and Ni-based alloys. Generally, the dissimilar joints between Ti and stainless steel were dominated by the Ti-based intermetallic compounds （IMCs）, e.g. （Ti, Zr）2（Fe, Ni）, TiFe, TiCu, and Ti2（Fe, Ni）, due to a significant dissolution of Ti from the base metal. The （Fe-Cr） cr phase was also observed near the stainless steel due to a segregation of Cr into the interface region. This research demonstrates empirically that the brittleness of the Ti and stainless steel joint can not be avoided only by applying single braze alloy or single insert metal, and thus an introduction of additional suitable interlayer between the filler alloy and the base metal is necessary to prevent the brittleness of the joint.
基金supported by the National Natural Science Foundation of China(Nos.51871128,51875300)the Natural Science Foundation of Shandong Province,China(No.ZR2018MEE017)+1 种基金Local Science and Technology Development Projects Guided by the Central Government,China(No.YDZX20203700003578)2021 Major Industrial Key Project of Transformation of Old and New Driving Forces in Shandong Province,China。
文摘This work briefly describes some of the different features of groups of metals.It highlights recent progress in research into metals.It details the structures and defects in solid metals.The common theories of metals including the free electron theory,band theory,the ions in a sea of electrons model and the soft sphere model are discussed and their merits are considered.It describes distinctions between the bonding in metals and inter-metallic compounds.It shows the influence of bonding on the properties of metals and alloys and provides a summary of tradition and newer uses of metals.
