Morphodynamic signatures derived from daily surface elevation dynamics can explain the morphodynamic development of tidal flats

Understanding the sensitivity of tidal flats to environmental changes is challenging.Currently,most studies rely on process-based models to systematically explain the morphodynamic evolution of tidal flats.In this study,we proposed an alternative empirical approach to explore tidal flat dynamics using statistical indices based on long-term time series of daily surface elevation development.Surface elevation dynamic(SED)indices focus on the magnitude and period of surface elevation changes,while morphodynamic signature(MDS)indices relate sediment dynamics to environmental drivers.The statistical analyses were applied to an intervention site in the Netherlands to determine the effect of recently constructed groynes on the tidal flat.Using these analyses,we were able to(1)detect a reduction in the daily SED and(2)determine that the changes in the daily SED were predominantly caused by the reduction in wave impact between the groynes rather than the reduction in tidal currents.Overall,the presented results showed that the combination of novel statistical indices provides new insights into the trajectories of tidal flats,ecosystem functioning,and sensitivity to physical drivers(wind and tides).Finally,we suggested how the SED and MDS indices may help to explore the future trajectories and climate resilience of intertidal habitats.

Relative importance of tidal flats and artificial habitats for two spoonbill species and related interspecific differences

Artificial/seminatural environments,such as aquacultural ponds,saltpans,and croplands,have recently been acknowledged as important habitats for coastal waterbirds.Although coastal waterbirds tend to use artificial habitats around tidal flats as roosting sites during high-tide,it remains unclear whether the importance of surrounding habitats relative to tidal flats varies among landscape types,seasons,species,or tidal conditions.The Black-faced Spoonbill(Platalea minor)and Eurasian Spoonbill(P.leucorodia)are two closely related sympatric species in East Asia with narrow and wide distribution ranges and habitat requirements,respectively.We therefore expect that both species will use surrounding artificial habitats across seasons at high tides,but Blackfaced Spoonbills will use them less frequently than Eurasian Spoonbills.Here,we address these hypotheses in the Imazu tidal flat and its surrounding environments in southern Japan.We investigated the habitat use and behavioral patterns of both species through route and behavioral surveys during the fall migration and wintering seasons in 2021.We found that both species used surrounding habitats including artificial ones more frequently than the tidal flat regardless of the tidal condition or season,but spoonbills used these habitats more frequently in winter than in autumn.We also found that Eurasian Spoonbills foraged in surrounding artificial habitats more frequently than Black-faced Spoonbills.These results not only demonstrate how coastal waterbirds exploit surrounding habitats relative to tidal flats but also suggest that the importance of surrounding habitats varies among species and seasons.Our study thus emphasizes that valuing and managing surrounding habitats in addition to tidal flats are key to conserving globally declining waterbirds.

Numerical Study of Flow Features Around Submerged Circular and Square Piles at Flat and Scoured Beds Using OpenFOAM

Elucidating the flow features around piles in local scouring processes is crucial for studies of local scouring mechanisms and scour depth estimates.This study details the flow turbulence characteristics of two submerged piles that are determined by solving the Navier-Stokes equations with the improved delayed detached eddy simulation model.This model is verified by comparing experimental and numerical results for hydrodynamic parameters with the literature for both square-crossing piles(SCPs)and circular-crossing piles(CCPs).Original topographies of flat and scoured beds(i.e.,the initial and equilibrium scouring stages)are based on experimental results obtained by the authors in the present paper.SCP and CCP flow features in the scouring process are discussed.The results indicate that during the scouring process,the time-averaged drag coefficient and root mean square(rms)of the lift coefficient increase linearly in the CCP test,while the rms of the lift coefficient in the SCP test decreases linearly.Moreover,the minimum pressure coefficient is always located in the upstream corners in the SCP case but moves from 72.5°to 79.5°when the scour hole is completely developed in the CCP case.Downward flow behind the pile,which is generated by separated boundary layers above the top face of the pile,can reach the sand bed and turn the separated shear layers into patches of small vortices in the near-wake regions.Thus,the high shear stress zones are mainly at the scour edges under scoured-bed conditions.

Experimental observation of Fermi-level flat band in novel kagome metal CeNi_(5)

Kagome materials are a class of material with a lattice structure composed of corner-sharing triangles that produce various exotic electronic phenomena,such as Dirac fermions,van Hove singularities,and flat bands.However,most of the known kagome materials have a flat band detached from the Fermi energy,which limits the investigation of the emergent flat band physics.In this work,by combining soft x-ray angle-resolved photoemission spectroscopy(ARPES)and the first-principles calculations,the electronic structure is investigated of a novel kagome metal CeNi_(5) with a clear dispersion along the kz direction and a Fermi level flat band in theΓ–K–M–Γplane.Besides,resonant ARPES experimental results indicate that the valence state of Ce ions is close to 4^(+),which is consistent with the transport measurement result.Our results demonstrate the unique electronic properties of CeNi_(5) as a new kagome metal and provide an ideal platform for exploring the flat band physics and the interactions between different types of flat bands by tuning the valence state of Ce ions.

Layered kagome compound Na_(2)Ni_(3)S_(4)with topological flat band

We report structural and electronic properties of Na_(2)Ni_(3)S_(4),a quasi-two-dimensional compound composed of alternating layers of[Ni_(3)S_(4)]^(2-)and Na^(+).The compound features a remarkable Ni-based kagome lattice with a square planar configuration of four surrounding S atoms for each Ni atom.Magnetization and electrical measurements reveal a weak paramagnetic insulator with a gap of about 0.5 eV.Our band structure calculation highlights a set of topological flat bands of the kagome lattice derived from the rotated dxz-orbital with C_(3)+T symmetry in the presence of crystal-field splitting.

Observation of flat-band localized state in a one-dimensional diamond momentum lattice of ultracold atoms

We investigated the one-dimensional diamond ladder in the momentum lattice platform. By inducing multiple twoand four-photon Bragg scatterings among specific momentum states, we achieved a flat band system based on the diamond model, precisely controlling the coupling strength and phase between individual lattice sites. Utilizing two lattice sites couplings, we generated a compact localized state associated with the flat band, which remained localized throughout the entire time evolution. We successfully realized the continuous shift of flat bands by adjusting the corresponding nearest neighbor hopping strength, enabling us to observe the complete localization process. This opens avenues for further exploration of more complex properties within flat-band systems, including investigating the robustness of flat-band localized states in disordered flat-band systems and exploring many-body localization in interacting flat-band systems.

Laser-induced breakdown spectroscopy as a method for millimeter-scale inspection of surface flatness

A non-contact method for millimeter-scale inspection of material surface flatness via Laser-Induced Breakdown Spectroscopy(LIBS)is investigated experimentally.The experiment is performed using a planished surface of an alloy steel sample to simulate its various flatness,ranging from 0 to 4.4 mm,by adjusting the laser focal plane to the surface distance with a step length of 0.2 mm.It is found that LIBS measurements are successful in inspecting the flatness differences among these simulated cases,implying that the method investigated here is feasible.It is also found that,for achieving the inspection of surface flatness within such a wide range,when univariate analysis is applied,a piecewise calibration model must be constructed.This is due to the complex dependence of plasma formation conditions on the surface flatness,which inevitably complicates the inspection procedure.To solve the problem,a multivariate analysis with the help of Back-Propagation Neural Network(BPNN)algorithms is applied to further construct the calibration model.By detailed analysis of the model performance,we demonstrate that a unified calibration model can be well established based on BPNN algorithms for unambiguous millimeter-scale range inspection of surface flatness with a resolution of about 0.2 mm.

Evaluation of the seismic behavior of reinforced concrete structures with flat slab-column gravity frame and shear walls through nonlinear analysis methods

This paper presents an investigation of the seismic behavior of reinforced concrete(RC)structures in which shear walls are the main lateral load-resisting elements and the participation of flat slab floor systems is not considered in the seismic design procedure.In this regard,the behavior of six prototype structures(with different heights and plan layouts)is investigated through nonlinear static and time history analyses,implemented in the OpenSees platform.The results of the analyses are presented in terms of the behavior of the slab-column connections and their mode of failure at different loading stages.Moreover,the global response of the buildings is discussed in terms of some parameters,such as lateral overstrength due to the gravity flat slab-column frames.According to the nonlinear static analyses,in structures in which the slab-column connections were designed only for gravity loads,the slab-column connections exhibited a punching mode of failure even in the early stages of loading.However,the punching failure was eliminated in structures in which a minimum transverse reinforcement recommended in ACI 318(2019)was provided in the slabs at joint regions.Furthermore,despite neglecting the contribution of gravity flat slab-column frames in the lateral load resistance of the structures,a relatively significant overstrength was imposed on the structures by the gravity frames.

A More Accurate Determination of the Magnitude of Cosmic Inflation in the Big Bang Model

According to our hypothesis, at the very beginning of the Big Bang, a hyperenergetic spherical wave was created. We described its characteristics in our previous work, and the present work is based on them. Logically, we saw that in cosmic inflation the frequency of such a wave would decrease sharply. Based on the temperature that prevailed immediately after inflation according to the hot Big Bang model, we determined a measure of the size of the inflation in this model, in accordance with our hypothesis.

Thermodynamic Analysis and Optimization of Flat Plate Solar Collector Using TiO_(2)/Water Nanofluid

To research solar energy's efficiency and environmental benefits,the thermal efficiency,exergy,and entropy of solar collectors were calculated.The experiment involved two glass-topped collectors,fluid transfer tubes,and aluminum heat-absorbing plates.Glass wool insulation minimized heat loss.A 0.5% TiO_(2)/Water nanofluid was created using a mechanical and ultrasonic stirrer.Results showed that solar radiation increased thermal efficiency until midday,reaching 48.48% for water and 51.23% for the nanofluid.With increasing mass flow rates from 0.0045 kg/s to 0.02 kg/s,thermal efficiency improved from 16.26% to 47.37% for water and from 20.65% to 48.76% for the nanofluid.Filtered water provided 380 W and 395 W of energy in March and April,while the nanofluid increased it to 395 W and 415 W during these months.Mass flow generated energy,and the Reynolds number raised entropy.The noon exergy efficiency for nanofluids was 50%-55%,compared to 30% for water.At noon,the broken exergy measured 877.53 W for the nanofluid and 880.12 W for water.In Kirkuk,Iraq,the 0.5% TiO_(2)/Water nanofluid outperformed water in solar collectors.

Changes of coastline and tidal flat and its implication for ecological protection under human activities: Take China’s Bohai Bay as an example

The change processes and trends of shoreline and tidal flat forced by human activities are essential issues for the sustainability of coastal area,which is also of great significance for understanding coastal ecological environment changes and even global changes.Based on field measurements,combined with Linear Regression(LR)model and Inverse Distance Weighing(IDW)method,this paper presents detailed analysis on the change history and trend of the shoreline and tidal flat in Bohai Bay.The shoreline faces a high erosion chance under the action of natural factors,while the tidal flat faces a different erosion and deposition patterns in Bohai Bay due to the impact of human activities.The implication of change rule for ecological protection and recovery is also discussed.Measures should be taken to protect the coastal ecological environment.The models used in this paper show a high correlation coefficient between observed and modeling data,which means that this method can be used to predict the changing trend of shoreline and tidal flat.The research results of present study can provide scientific supports for future coastal protection and management.

How the Flat Space Cosmology Model Correlates the Recombination CMB Temperature of 3000 K with a Redshift of 1100

This paper shows how the Flat Space Cosmology model correlates the recom-bination epoch CMB temperature of 3000 K with a cosmological redshift of 1100. This proof is given in support of the recent publication that the Tatum and Seshavatharam Hubble temperature formulae can be derived using the Stephan-Boltzmann dispersion law. Thus, as explained herein, the era of high precision Planck scale quantum cosmology has arrived.

Product Development of High Strength and Toughness Spring Flat Steel

With the continuous development of mechanical industry,higher requirements are put forward for the comprehensive properties of spring steel.The chemical composition and production process of spring flat steel are designed to meet the requirements of high strength and high toughness of spring flat steel,through the test,the product surface quality and internal quality all meet the national standards,the performance indicators to meet user requirements.

A DEM Inversion Method for Inter-Tidal Zone Based on MODIS Dataset:A Case Study in the Dongsha Sandbank of Jiangsu Radial Tidal Sand-Ridges,China

Surthce elevation is tile basic data for geo-science. It is difficult to retrieve tidal-flats＇ elevation from a single Re- mote Sensing （RS） image because of the complicated sediment dynanical environment and huge spatial difference in tidal-flats＇ moisture content. A Digital Elevation Model （DEM） construction method for inconstant inter-tidal zone based on high tempo-resolution MODIS data set in a short period is proposed in a ease study on the Dongsha Sandbank of the Jiangsu Radial Tidal Sand-ridges. In the present study, a batch-preprocessing method based on image partition to handle massive MODIS IB images is developed and applied to 8163 scenes of MODIS images. The dataset of short-period and muhi-temporal MODIS images for inter-tidal flats＇ DEM inversion is selected and the usability of MODIS dataset is analyzed. Shorelines of the Dongsha Sandbank are extracted by use of batch supervised classification. In accord with tidal- 0 level forecasted by the Chenjiawu Tidal Gauge Station at the overpass moment of each RS image, DEMs of inter-tidal flats in January and sutmner（Jul, Aug and Sept）, 2003 are built under ArcG1S9.2. Studies show that： （1） The dataset of short-duration and muhi-phase MODIS images can be used to retrieve the historical DEM of tidal-flats at changeful tidal flats. （2） Aualysis on usability of MODIS images from Aqua and Terra indicates that there are more usable and higbquality MODIS images in spring, autumn and winter, but less in summer. Therefore, the period for building inter-tidal fiats＇ DEM is suggested to be one month in spring, autumn and winter and three months in summer.

Observations of boundary layer parameters and suspended sediment transport over the intertidal flats of northern Jiangsu, China

A current-turbidity monitoring system (CTMS) was deployed on the intertidal flat at Wanggang, northern Jiangsu during October 16-17, 2000, to measure the tidal current speeds and seawater turbidities at 5 levels above the seabed. Based upon the logarithmic-profile equation, the boundary layer parameters, i.e., u, z0 and C60, were obtained for 247 tidal flow velocity profiles. Around 90% of the profiles were logarithmic according to the critical correlation coefficient. Internal consistency analysis shows that these parameters derived by different methods are consistent with each other. In addition, the height of the bedforms observed is close to the seabed roughness lengths calculated from the velocity profiles, indicating that the boundary layer parameters obtained can reveal the conditions at the sediment-water interface on the intertidal flats. Suspended sediment concentrations were obtained from the 5 CTMS turbidity meters using laboratory and in-situ calibrations. The results show that the in-situ calibrated SSCs have a much higher accuracy than the laboratory calibrated ones. Calculation of suspended sediment fluxes on the intertidal flats, with a magnitude of 104 kg/m per spring tidal cycle, indicates that suspended sediment moves towards the northwest, which is reversal to the transport pattern controlled by the southward Northern Jiangsu Coastal Current in the sub-tidal zone and adjacent shallow waters.

Distribution of ^137Cs and ^210Ppb in sediments of tidal flats in north Jiangsu Province

Seven cores were collected from different sediment zones of tidal flats at Xin- yanggang in north Jiangsu province in August 2007. Sediment grain-size distribution and radioisotopes of ^137Cs and ^210Ppb analysis were carried out for these cores. Sediment rates of the cores and radioisotopes distribution in surface sediment in different zones of the tidal flat were calculated from the ^137Cs and ^210Ppb activities in sediments cores. The results indicated that each tidal zone had experienced different evolution phases, hydrological dynamics in the tidal flats made the grain-size of the surface sediment change gradually. ^137Cs and ^210Ppb activities on the superficial layer of the cores varied spatially and the reason was discussed. On tidal flats, the fluctuation of ^137Cs and ^210Ppb activities in the cores reflected the special sedimentary characteristics. Vegetation affects the grain-size distribution and the vertical profiles of ^137Cs and ^210Ppb in the upper depths. ^137Cs and ^210Ppb chronology got the comparable average sediment rates on the tidal flat. The characteristics of ^137Cs and ^210Ppb in the cores reflected various depositional dynamical environments in different tidal zones and gave information on the different evolvement phases of the tidal zones. Based on the information of grain-size distribution, texture of the cores, sediment rates and topography, the evolution lines of the tidal flat were reconstructed.

THE TIDAL FLATS MORPHOLOGICAL DEVELOPMENT AND THE COASTAL LAND RECLAMATION IN SHANGHAI

More than 904.2 km2 of the flats are above the theorotical datum level with progressive rate of 20-200 m/a to the sea in Shanghai. Since the reclaimed land is vital important to the city, multiple approaches to accelerating siltation are proposed in the paper according to detailed study of dynamics, sedimentary structure and landform evolution based on plentiful in situ data. It is of great significance to utilize tidal flats and reclamation of land in Shanghai.

THE GRAPH INDUCED BY AFFINE M-FLATS OVER FINITE FIELDS II

Let AG(n,F q) be the n-dimensional affine space over F q,where F q is a finite field with q elements.Denote by Γ (m) the graph induced by m-flats of AG(n,F q).For any two adjacent vertices E and F of Γ (m),Γ (m)(E)∩Γ (m)(F) is studied.In particular,sizes of maximal cliques in Γ (m) are determined and it is shown that Γ (m) is not edge-regular when m<n-1.

A Lagrangian mean theory on coastal sea circulation with inter-tidal transports I.Fundamentals

A brief review is made on the theory of the Lagrangian residual circulation and inter-tidal transports in a convectively weakly nonlinear system. In the review the emphasis is put on the systematical development of the theory and its weakness of convectively weakly nonlinear approximation. The fundamentals of a Lagrangian tidally-averaged theory on circulation with inter-tidal transport processes have been proposed for a general nonlinear coastal/estuarine system. The Lagrangian residual velocity is strictly de- fined, and it has been verified to be able to embody the velocity field of circulation. A new concept of the concentration for inter- tidal transport processes is presented. The concentration describing the inter-tidal transport processes should be a ＂Lagrangian inter-tidal concentration＂ defined and named, but not the Eulcrian tidally-averaged concentration used traditionally. The circulation described here contains a set of infinite temporal-spatial fields of velocity/concentration, each of which corresponds to a specific value of tidal phases varying continuously over one tidal cycle. When the convectively weakly nonlinear condition（ with a smaller order of eddy diffusion and sources） is approximately satisfied, a set of infinite temporal-spatial fields of velocity/concentration can be reduced to a single one.. the mass transport velocity/the Eulerian tidally averaged concentration as exhibited traditionally.

Nesting patterns of raptors;White backed vulture (<i>Gyps africanus</i>) and African fish eagle (<i>Haliaeetus vocifer</i>), in Lochinvar National Park on the kafue flats, Zambia

This study assessed the nesting patterns of raptors, Gyps africanus and Haliaeetus vocifer in Lochinvar National Park. The main objective of the study was to determine whether tree species, height, girth size, and habitat influenced raptor’s nest placement within Lochinvar National Park. Two species were selected as indicator species for the raptors. Habitat types and tree species were identified and measurements of tree species with nests measured. It was found that the minimum height of nest placement was 10 meters above ground and Acacia woodland was found to be the most preferred habitat for nest placement. Raptors avoided human disturbance by placing their nests at least 100 meters away from human disturbance and from the National park boundary inwards or abandoning if human encroachment comes close to the nest. More research is required to assess nesting materials used, and to determine whether raptors can swap nets or return to the abandoned nests when human disturbance ceases.