The study of inter-system bias(ISB)is important for multi-system fusion and the performance of different signal compatibility.In this paper,the stability of ISB at the BDS3/BDS2 receiver end is calculated and analyzed...The study of inter-system bias(ISB)is important for multi-system fusion and the performance of different signal compatibility.In this paper,the stability of ISB at the BDS3/BDS2 receiver end is calculated and analyzed for different time spans(DOY 060~090 in 2021)from a total of 31 MGEX and iGMAS stations.We adopted two estimation strategies,random walk and constant approach,using the precision products of orbit and clock bias provided by WUM,the influence of which on ISB was also analyzed.Our results showed that the ISB value varied little within a day,and the mean of daily ISB standard deviation was only 0.037 m when the observation condition was good.The signal reception was continuous,indicating a high ISB stability for one day.If extending the time series to one month,however,the ISB standard deviation calculated by constant approach,in which a constant ISB is estimated on a daily basis was about 0.1 m,and the results of adjacent days were not continuous,with no apparent pattern.Concerning the random walk approach,the obtained ISB time series also had a jump,and the conclusion was the same as that of the constant strategy.Besides,receiver types showed a strong regularity in ISB numerical situation,and the distribution of ISB values corresponding to the same receiver type was relatively close.Therefore,we conclude that the ISB parameters remain stable in the short term(one day)and less stable in the long-term period.It is recommended that the ISB term should be set as a constant estimate every day in BDS3/BDS2 solutions,regardless of receiver type consistency.展开更多
The aim of this study was to determine the relationship between inter canine width (ICW) and inter alar width (IAW), inter commissural width (ICoW), and inter canthal distance (ICaD) in Bantu population. Materials and...The aim of this study was to determine the relationship between inter canine width (ICW) and inter alar width (IAW), inter commissural width (ICoW), and inter canthal distance (ICaD) in Bantu population. Materials and Methods: It was a pilot study included all participants who were aged at least 18 years, without a history of orthodontics treatment from Prosthodontics Department, Faculty of Dental Medicine, University of Kinshasa. The Ethics committee of the National Center of Research for Dental Sciences in DR Congo approved the study protocol (CNRSB 1504.218). The participants medical records were obtained from the interview and dental examination. Nature of the study was explained with participant information sheet, and an informed consent of all participants was obtained. The inclusion criteria were no missing maxillary and mandibular teeth, no diastema, and no anterior restorations, 18 years old before enrollment in the study. The exclusion criteria were inability to meet the above requirements, pregnancy, and refusal to participate in the study. The inter-canine width (ICW), inter alar width (IAW), inter canthal distance (ICaD) and inter-commissural width (ICoW) of each participant were measured with a digital Vernier caliper (Mitutoyo, UK Ltd.,) (0.01 mm) three times and the average value was recorded. The inter canthal distance (ICaD) was measured without applying pressure by bringing the recording parts of the caliper just in contact with the medial angle. The inter alar width (IAW) was marked with a fine marked pencil on the widest outer surface of the alae of the nose on either side or width. Those two points were measured without applying pressure by bringing the recording parts of the caliper just in contact with the outer surface. The participant was told to stop breathing shortly to avoid any change in shape of the nose. The inter-commissural width (ICoW) was determined by measuring the maxillary lip vermilion from commissure to commissure without the application of pressure on the tissue in the relaxed state. The inter-canine width (ICW) was measured indirectly using a dental floss. A dental floss was marked on one end prior to placement in the mouth. Using that point as reference, the dental floss was circumference along the curvature of the anterior dentition such that it passed along the contact point of all the teeth. The distal end of the canine teeth on both sides was then marked on the floss while it was stretched in the patients mouth. Floss was marked on both sides with the marker pencil. The distance between the two proximal contact points was measured and recorded. Data, analysis and validation were performed by the SPSS software (version 22.0, IBM SPSS Statistics, Chicago, IL, USA). Unpaired t-test was used, of Kolmogorov-Smirnov test. Analysis of variance (ANOVA) test was used to test for comparability between socio-demographic characteristics dental measurements. Pearsons correlation coefficients test was calculated to determine the relationship between facial and dental parameters. Significance was set at P 0.01. Results: Of 314 participants enrolled, 202 were included. The age ranged from 18 to 68 years, with a mean age of 40.62 12.99 years. Although the Pearsons correlation coefficients were negative. Ninety-three participants (46%) were men and one hundred and nine (54%) were women. The overall mean age was 40.62 12.99 years. Facial and dental measurements were greater in women than men with significant differences for ICW (p = 0.04). However, no significant difference was seen between men and women for IAW, ICaD and ICoW (p = 0.44, p = 0.23, p = 0.31 respectively). The correlation including Pearsons correlation coefficient and P-values for all participants is not demonstrated. Conclusion: Within the limitations of this study, the results suggest that IAW, ICaD and ICoW cannot be used as a preliminary method for determining the width of the maxillary for anterior teeth for edentulous patients.展开更多
When designing a solar power plant, it is much more important to avoid the shadow on the PV Panels. As the shadow falls on the PV Panels;it significantly reduces the generation of required power as planned and designe...When designing a solar power plant, it is much more important to avoid the shadow on the PV Panels. As the shadow falls on the PV Panels;it significantly reduces the generation of required power as planned and designed. This research paper and case study will help a lot to avoid shadow, especially when selecting inter-row spacing between the strings of solar power plants.展开更多
In this paper, by a nonlinear procedure of a eigenvalue problem, we get a Bargmann system and prove it is a completely in tegrable system in the meanning of Liouville. By the way, the involutive solutio n of the repr...In this paper, by a nonlinear procedure of a eigenvalue problem, we get a Bargmann system and prove it is a completely in tegrable system in the meanning of Liouville. By the way, the involutive solutio n of the representation equation is given.展开更多
In this paper, an event-triggered sliding mode control approach for trajectory tracking problem of nonlinear input affine system with disturbance has been proposed. A second order robotic manipulator system has been m...In this paper, an event-triggered sliding mode control approach for trajectory tracking problem of nonlinear input affine system with disturbance has been proposed. A second order robotic manipulator system has been modeled into a general nonlinear input affine system. Initially, the global asymptotic stability is ensured with conventional periodic sampling approach for reference trajectory tracking. Then the proposed approach of event-triggered sliding mode control is discussed which guarantees semi-global uniform ultimate boundedness. The proposed control approach guarantees non-accumulation of control updates ensuring lower bounds on inter-event triggering instants avoiding Zeno behavior in presence of the disturbance. The system shows better performance in terms of reduced control updates, ensures system stability which further guarantees optimization of resource usage and cost. The simulation results are provided for validation of proposed methodology for tracking problem by a robotic manipulator. The number of aperiodic control updates is found to be approximately 44% and 61% in the presence of constant and time-varying disturbances respectively.展开更多
Earthquake is a kind of sudden and destructive random excitation in nature.It is significant to determine the probability distribution characteristics of the corresponding dynamic indicators to ensure the safety and t...Earthquake is a kind of sudden and destructive random excitation in nature.It is significant to determine the probability distribution characteristics of the corresponding dynamic indicators to ensure the safety and the stability of structures when the intensive seismic excitation,the intensity of which is larger than 7,acts in train-bridge system.Firstly,the motion equations of a two-dimensional train-bridge system under the vertical random excitation of track irregularity and the vertical seismic acceleration are established,where the train subsystem is composed of 8 mutually independent vehicle elements with 48 degrees of freedom,while the single-span simple supported bridge subsystem is composed of 102D beam elements with 20 degrees of freedom on beam and 2 large mass degrees of freedom at the support.Secondly,Monte Carlo method and pseudo excitation method are adopted to analyze the statistical parameters of the system.The power spectrum density of random excitation is used to define a series of non-stationary pseudo excitation in pseudo excitation method and the trigonometric series of random vibration history samples in Monte Carlo method,respectively solved by precise integral method and Newmark-βmethod through the inter-system iterative procedure.Finally,the results are compared with the case under the weak seismic excitation,and show that the samples of vertical acceleration response of bridge and the offload factor of train obeys the normal distribution.In a high probability,the intensive earthquakes pose a greater threat to the safety and stability of bridges and trains than the weak ones.展开更多
Under the sintering condition of normal pressure, the su-perfine, high density tetragonal zirconia polycrystalline ceramics were prepared by means of doping 3 mol% Y2O3 and other trace oxides which act as the grain st...Under the sintering condition of normal pressure, the su-perfine, high density tetragonal zirconia polycrystalline ceramics were prepared by means of doping 3 mol% Y2O3 and other trace oxides which act as the grain stabilizing agent and the grain growing in-hibitor. By the density measurements and analyses of XRD, SEM and TEMj etc. it was studied that the microstructure of ZrOz system poly-crystalline ceramics is affected by doping trace oxides of CuO. FezO3 and SiO2.展开更多
To solve the inter carrier interference (ICI) elimination problem of an M-band wavelet multi-carrier modulation system, this paper analyzes the principle of the ICI caused by the Doppler frequency shift and its math...To solve the inter carrier interference (ICI) elimination problem of an M-band wavelet multi-carrier modulation system, this paper analyzes the principle of the ICI caused by the Doppler frequency shift and its mathematical expression based on the M-band wavelet multi-carrier modulation system model. Through the analysis of the mathematical expression and combining with the perfect reconstruction conditions of the filter banks, we propose the design conditions of an M-band filter to reduce and eliminate the ICI. The impulse response model of the filter design conditions and an iterative algorithm is also established. The simulation results show that the proposed ICI reduction and elimination methods can effectively improve the system performance.展开更多
After many years research work, many intelligent systems based on knowledge have been created. But the differences in creating methods and applying background contexts make it difficult to share and reuse knowledge. T...After many years research work, many intelligent systems based on knowledge have been created. But the differences in creating methods and applying background contexts make it difficult to share and reuse knowledge. This situation leads to the difficulty of building knowledge system. Without method using the existing system efficiently, people often build knowledge sys tem from scratch. In order to solve this problem, we use ontology as a foundation to realize know ledge sharing and reusing. As an important research area in AI, ontology building method has not acquired a common view. The method for building ontology was discussed, it’s principles and implementation.展开更多
REE concentrations and distribution patterns in the different phases of water-sediment interface system at deep ocean floor were studied on the basis of samples of bottom water, sediments, interstitial water and polym...REE concentrations and distribution patterns in the different phases of water-sediment interface system at deep ocean floor were studied on the basis of samples of bottom water, sediments, interstitial water and polymetallic nodules collected from the East Pacific Basin by R/V Haiyang 4 during HY4-871 and HY4-881Cruises. It is suggested that REE concentrations in oxic interstitial water are lower than that in bottom weter,REE contents of polymetallic nodules, except Ce, are similar to that of sediments. Bottom water, sediments and interstitial water are almost the same in REE distribution patterns. MREE enrichment relative to LREE and HREE and negative Ce anomalies, MREE earichment has been found in polymetallic nodules,and Ce shows positive anomalies. REE contents in sediments increase with depth, and the vacations of distribution patterns with depth have not been found.展开更多
Multiple approaches have been used to estimate groundwater recharge in the Upper Awash river basin. The amount of recharge reaching the Upper Awash aquifer system from the Blue Nile sub-basins is also estimated. Water...Multiple approaches have been used to estimate groundwater recharge in the Upper Awash river basin. The amount of recharge reaching the Upper Awash aquifer system from the Blue Nile sub-basins is also estimated. Water Balance, Chloride Mass Balance and HYDRUS 1D infiltration model are used to estimate recharge. A total of 29 sites were selected for the HYDRUS 1D multiple “at point” recharge simulations. Base Flow Separation (BFS) methods, using both River Analysis Package software Version 3.0.3 and Excel-based Time Plot program are also used as a proxy for recharge. Besides, overlay analysis in Processing MODFLOW, ArcGIS, and SURFER environments has been done to thoroughly consider spatial heterogeneity between any two point estimates and appreciate the effect of lineament density, topography, slope and major urbanized land on pattern of spatial distribution of recharge. Because of differences inherent in the assumptions and datasets used, the various methods employed give wide range of differences in recharge estimates. Recharge estimated for the Upper Awash basin ranges from 51.5 mm/year to 157 mm/year and for the two southern left-bank sub-basins of the Middle Blue Nile basin (Mugher and Jema) ranges from 86 mm/year to 239 mm/year. Consequently, annual average volumetric recharge in the Upper Awash and annual groundwater flux from portion of the Blue Nile sub basins to the Upper Awash aquifer system are estimated to be 983 Mm3 and 365 Mm3 respectively. The significant flux joining the Upper Awash groundwater system from part of the Middle Blue Nile basin, which is almost 37% of the total annual recharge to the Upper Awash basin makes this part of the Middle Blue Nile basin an important recharge zone for the Upper Awash groundwater. Estimating recharge using integrated approaches was found to be useful to identify range of plausible recharge rates in the two basins. Besides, the new methodological approach of superimposing recharge governing factors on interpolation of point recharge estimates helps to produce physical based spatial distribution of recharge.展开更多
Alkali-activated slag concrete (AASC) is a new green building material. The amount of CO_(2) produced by AASC is 1/5th of that produced by ordinary Portland cement concrete (OPCC). In addition, AASC promotes the reuse...Alkali-activated slag concrete (AASC) is a new green building material. The amount of CO_(2) produced by AASC is 1/5th of that produced by ordinary Portland cement concrete (OPCC). In addition, AASC promotes the reuse of slag and other wastes and saves resources. Furthermore, the scope of use of slag has been expanded. The progress of the research on the hydration characteristics, microstructure, interfacial transition zone, and pore structure of AASC based on the relevant literatures was analyzed and summarized in this study. The influences of the slag composition, the type and dosage of the alkali activator, and the curing conditions on the hydration characteristics and the microstructure of the AASC were discussed. Relatively few research results on the microstructure of AASC are available, and the relevant conclusions are not completely consistent. Moreover, there are many constraints on the development of AASC (e.g., complex composition of raw materials of slag, large shrinkage deformation, and low fluidity). Therefore, further research is required.展开更多
Cloud infrastructural resource optimization is the process of precisely selecting the allocating the correct resources either to a workload or application.When workload execution,accuracy,and cost are accurately stabi...Cloud infrastructural resource optimization is the process of precisely selecting the allocating the correct resources either to a workload or application.When workload execution,accuracy,and cost are accurately stabilized in opposition to the best possible framework in real-time,efficiency is attained.In addition,every workload or application required for the framework is characteristic and these essentials change over time.But,the existing method was failed to ensure the high Quality of Service(QoS).In order to address this issue,a Tricube Weighted Linear Regression-based Inter Quartile(TWLR-IQ)for Cloud Infrastructural Resource Optimization is introduced.A Tricube Weighted Linear Regression is presented in the proposed method to estimate the resources(i.e.,CPU,RAM,and network bandwidth utilization)based on the usage history in each cloud server.Then,Inter Quartile Range is applied to efficiently predict the overload hosts for ensuring a smooth migration.Experimental results show that our proposed method is better than the approach in Cloudsim under various performance metrics.The results clearly showed that the proposed method can reduce the energy consumption and provide a high level of commitment with ensuring the minimum number of Virtual Machine(VM)Migrations as compared to the state-of-the-art methods.展开更多
With the development of High-Speed Rail(HSR),countries and individual passengers alike have enjoyed far ranging benefits as a result-economic,social,environment and in added convenience.One of the important parts of H...With the development of High-Speed Rail(HSR),countries and individual passengers alike have enjoyed far ranging benefits as a result-economic,social,environment and in added convenience.One of the important parts of HSR construction is the signaling system,where wireless communications play a key role in the transmission of train control data.Channel estimation has a significant impact on the quality of the wireless communication,however,whose performance is degraded due to the fast mobility of HSR.This paper focuses on the channel estimation technology in HSR.We first summarize the key challenges for HSR channel estimation,especially the Inter-Carrier Interference(ICI)faced by Orthogonal Frequency Division Multiplexing(OFDM)systems.Then we provide a comprehensive review of existing pilot-aided channel estimation schemes from three points:channel model,estimation algorithm,joint channel estimation and ICI mitigation schemes.Lastly,we present the challenges of channel estimation for the Orthogonal Time Frequency Space(OTFS)system and Reconfigurable Intelligent Surface(RIS),which are promising techniques for HSR systems in the future sixth Generation(6G)wireless communication.展开更多
基金the Natural Science Innovation Group Foundation of China under Grants NO.41721003the Science and Technology Support Project of Department of Natural Resources of Hubei Province under Grants NO.ZRZY2022KJ29+1 种基金the Special Fund of Hubei Luojia Laboratory under Grants NO.220100020the National Natural Science Foundation of China under Grants NO.42174030.
文摘The study of inter-system bias(ISB)is important for multi-system fusion and the performance of different signal compatibility.In this paper,the stability of ISB at the BDS3/BDS2 receiver end is calculated and analyzed for different time spans(DOY 060~090 in 2021)from a total of 31 MGEX and iGMAS stations.We adopted two estimation strategies,random walk and constant approach,using the precision products of orbit and clock bias provided by WUM,the influence of which on ISB was also analyzed.Our results showed that the ISB value varied little within a day,and the mean of daily ISB standard deviation was only 0.037 m when the observation condition was good.The signal reception was continuous,indicating a high ISB stability for one day.If extending the time series to one month,however,the ISB standard deviation calculated by constant approach,in which a constant ISB is estimated on a daily basis was about 0.1 m,and the results of adjacent days were not continuous,with no apparent pattern.Concerning the random walk approach,the obtained ISB time series also had a jump,and the conclusion was the same as that of the constant strategy.Besides,receiver types showed a strong regularity in ISB numerical situation,and the distribution of ISB values corresponding to the same receiver type was relatively close.Therefore,we conclude that the ISB parameters remain stable in the short term(one day)and less stable in the long-term period.It is recommended that the ISB term should be set as a constant estimate every day in BDS3/BDS2 solutions,regardless of receiver type consistency.
文摘The aim of this study was to determine the relationship between inter canine width (ICW) and inter alar width (IAW), inter commissural width (ICoW), and inter canthal distance (ICaD) in Bantu population. Materials and Methods: It was a pilot study included all participants who were aged at least 18 years, without a history of orthodontics treatment from Prosthodontics Department, Faculty of Dental Medicine, University of Kinshasa. The Ethics committee of the National Center of Research for Dental Sciences in DR Congo approved the study protocol (CNRSB 1504.218). The participants medical records were obtained from the interview and dental examination. Nature of the study was explained with participant information sheet, and an informed consent of all participants was obtained. The inclusion criteria were no missing maxillary and mandibular teeth, no diastema, and no anterior restorations, 18 years old before enrollment in the study. The exclusion criteria were inability to meet the above requirements, pregnancy, and refusal to participate in the study. The inter-canine width (ICW), inter alar width (IAW), inter canthal distance (ICaD) and inter-commissural width (ICoW) of each participant were measured with a digital Vernier caliper (Mitutoyo, UK Ltd.,) (0.01 mm) three times and the average value was recorded. The inter canthal distance (ICaD) was measured without applying pressure by bringing the recording parts of the caliper just in contact with the medial angle. The inter alar width (IAW) was marked with a fine marked pencil on the widest outer surface of the alae of the nose on either side or width. Those two points were measured without applying pressure by bringing the recording parts of the caliper just in contact with the outer surface. The participant was told to stop breathing shortly to avoid any change in shape of the nose. The inter-commissural width (ICoW) was determined by measuring the maxillary lip vermilion from commissure to commissure without the application of pressure on the tissue in the relaxed state. The inter-canine width (ICW) was measured indirectly using a dental floss. A dental floss was marked on one end prior to placement in the mouth. Using that point as reference, the dental floss was circumference along the curvature of the anterior dentition such that it passed along the contact point of all the teeth. The distal end of the canine teeth on both sides was then marked on the floss while it was stretched in the patients mouth. Floss was marked on both sides with the marker pencil. The distance between the two proximal contact points was measured and recorded. Data, analysis and validation were performed by the SPSS software (version 22.0, IBM SPSS Statistics, Chicago, IL, USA). Unpaired t-test was used, of Kolmogorov-Smirnov test. Analysis of variance (ANOVA) test was used to test for comparability between socio-demographic characteristics dental measurements. Pearsons correlation coefficients test was calculated to determine the relationship between facial and dental parameters. Significance was set at P 0.01. Results: Of 314 participants enrolled, 202 were included. The age ranged from 18 to 68 years, with a mean age of 40.62 12.99 years. Although the Pearsons correlation coefficients were negative. Ninety-three participants (46%) were men and one hundred and nine (54%) were women. The overall mean age was 40.62 12.99 years. Facial and dental measurements were greater in women than men with significant differences for ICW (p = 0.04). However, no significant difference was seen between men and women for IAW, ICaD and ICoW (p = 0.44, p = 0.23, p = 0.31 respectively). The correlation including Pearsons correlation coefficient and P-values for all participants is not demonstrated. Conclusion: Within the limitations of this study, the results suggest that IAW, ICaD and ICoW cannot be used as a preliminary method for determining the width of the maxillary for anterior teeth for edentulous patients.
文摘When designing a solar power plant, it is much more important to avoid the shadow on the PV Panels. As the shadow falls on the PV Panels;it significantly reduces the generation of required power as planned and designed. This research paper and case study will help a lot to avoid shadow, especially when selecting inter-row spacing between the strings of solar power plants.
文摘In this paper, by a nonlinear procedure of a eigenvalue problem, we get a Bargmann system and prove it is a completely in tegrable system in the meanning of Liouville. By the way, the involutive solutio n of the representation equation is given.
文摘In this paper, an event-triggered sliding mode control approach for trajectory tracking problem of nonlinear input affine system with disturbance has been proposed. A second order robotic manipulator system has been modeled into a general nonlinear input affine system. Initially, the global asymptotic stability is ensured with conventional periodic sampling approach for reference trajectory tracking. Then the proposed approach of event-triggered sliding mode control is discussed which guarantees semi-global uniform ultimate boundedness. The proposed control approach guarantees non-accumulation of control updates ensuring lower bounds on inter-event triggering instants avoiding Zeno behavior in presence of the disturbance. The system shows better performance in terms of reduced control updates, ensures system stability which further guarantees optimization of resource usage and cost. The simulation results are provided for validation of proposed methodology for tracking problem by a robotic manipulator. The number of aperiodic control updates is found to be approximately 44% and 61% in the presence of constant and time-varying disturbances respectively.
基金Project(52178101) supported by the National Natural Science Foundation of China。
文摘Earthquake is a kind of sudden and destructive random excitation in nature.It is significant to determine the probability distribution characteristics of the corresponding dynamic indicators to ensure the safety and the stability of structures when the intensive seismic excitation,the intensity of which is larger than 7,acts in train-bridge system.Firstly,the motion equations of a two-dimensional train-bridge system under the vertical random excitation of track irregularity and the vertical seismic acceleration are established,where the train subsystem is composed of 8 mutually independent vehicle elements with 48 degrees of freedom,while the single-span simple supported bridge subsystem is composed of 102D beam elements with 20 degrees of freedom on beam and 2 large mass degrees of freedom at the support.Secondly,Monte Carlo method and pseudo excitation method are adopted to analyze the statistical parameters of the system.The power spectrum density of random excitation is used to define a series of non-stationary pseudo excitation in pseudo excitation method and the trigonometric series of random vibration history samples in Monte Carlo method,respectively solved by precise integral method and Newmark-βmethod through the inter-system iterative procedure.Finally,the results are compared with the case under the weak seismic excitation,and show that the samples of vertical acceleration response of bridge and the offload factor of train obeys the normal distribution.In a high probability,the intensive earthquakes pose a greater threat to the safety and stability of bridges and trains than the weak ones.
文摘Under the sintering condition of normal pressure, the su-perfine, high density tetragonal zirconia polycrystalline ceramics were prepared by means of doping 3 mol% Y2O3 and other trace oxides which act as the grain stabilizing agent and the grain growing in-hibitor. By the density measurements and analyses of XRD, SEM and TEMj etc. it was studied that the microstructure of ZrOz system poly-crystalline ceramics is affected by doping trace oxides of CuO. FezO3 and SiO2.
基金supported by the National Natural Science Foundation of China (Grant No.60872114)
文摘To solve the inter carrier interference (ICI) elimination problem of an M-band wavelet multi-carrier modulation system, this paper analyzes the principle of the ICI caused by the Doppler frequency shift and its mathematical expression based on the M-band wavelet multi-carrier modulation system model. Through the analysis of the mathematical expression and combining with the perfect reconstruction conditions of the filter banks, we propose the design conditions of an M-band filter to reduce and eliminate the ICI. The impulse response model of the filter design conditions and an iterative algorithm is also established. The simulation results show that the proposed ICI reduction and elimination methods can effectively improve the system performance.
文摘After many years research work, many intelligent systems based on knowledge have been created. But the differences in creating methods and applying background contexts make it difficult to share and reuse knowledge. This situation leads to the difficulty of building knowledge system. Without method using the existing system efficiently, people often build knowledge sys tem from scratch. In order to solve this problem, we use ontology as a foundation to realize know ledge sharing and reusing. As an important research area in AI, ontology building method has not acquired a common view. The method for building ontology was discussed, it’s principles and implementation.
文摘REE concentrations and distribution patterns in the different phases of water-sediment interface system at deep ocean floor were studied on the basis of samples of bottom water, sediments, interstitial water and polymetallic nodules collected from the East Pacific Basin by R/V Haiyang 4 during HY4-871 and HY4-881Cruises. It is suggested that REE concentrations in oxic interstitial water are lower than that in bottom weter,REE contents of polymetallic nodules, except Ce, are similar to that of sediments. Bottom water, sediments and interstitial water are almost the same in REE distribution patterns. MREE enrichment relative to LREE and HREE and negative Ce anomalies, MREE earichment has been found in polymetallic nodules,and Ce shows positive anomalies. REE contents in sediments increase with depth, and the vacations of distribution patterns with depth have not been found.
文摘Multiple approaches have been used to estimate groundwater recharge in the Upper Awash river basin. The amount of recharge reaching the Upper Awash aquifer system from the Blue Nile sub-basins is also estimated. Water Balance, Chloride Mass Balance and HYDRUS 1D infiltration model are used to estimate recharge. A total of 29 sites were selected for the HYDRUS 1D multiple “at point” recharge simulations. Base Flow Separation (BFS) methods, using both River Analysis Package software Version 3.0.3 and Excel-based Time Plot program are also used as a proxy for recharge. Besides, overlay analysis in Processing MODFLOW, ArcGIS, and SURFER environments has been done to thoroughly consider spatial heterogeneity between any two point estimates and appreciate the effect of lineament density, topography, slope and major urbanized land on pattern of spatial distribution of recharge. Because of differences inherent in the assumptions and datasets used, the various methods employed give wide range of differences in recharge estimates. Recharge estimated for the Upper Awash basin ranges from 51.5 mm/year to 157 mm/year and for the two southern left-bank sub-basins of the Middle Blue Nile basin (Mugher and Jema) ranges from 86 mm/year to 239 mm/year. Consequently, annual average volumetric recharge in the Upper Awash and annual groundwater flux from portion of the Blue Nile sub basins to the Upper Awash aquifer system are estimated to be 983 Mm3 and 365 Mm3 respectively. The significant flux joining the Upper Awash groundwater system from part of the Middle Blue Nile basin, which is almost 37% of the total annual recharge to the Upper Awash basin makes this part of the Middle Blue Nile basin an important recharge zone for the Upper Awash groundwater. Estimating recharge using integrated approaches was found to be useful to identify range of plausible recharge rates in the two basins. Besides, the new methodological approach of superimposing recharge governing factors on interpolation of point recharge estimates helps to produce physical based spatial distribution of recharge.
基金would like to acknowledge the National Natural Science Foundation of China(51590914 and 51608432)Natural Science Foundation of Shaanxi Province(2019JQ-481).
文摘Alkali-activated slag concrete (AASC) is a new green building material. The amount of CO_(2) produced by AASC is 1/5th of that produced by ordinary Portland cement concrete (OPCC). In addition, AASC promotes the reuse of slag and other wastes and saves resources. Furthermore, the scope of use of slag has been expanded. The progress of the research on the hydration characteristics, microstructure, interfacial transition zone, and pore structure of AASC based on the relevant literatures was analyzed and summarized in this study. The influences of the slag composition, the type and dosage of the alkali activator, and the curing conditions on the hydration characteristics and the microstructure of the AASC were discussed. Relatively few research results on the microstructure of AASC are available, and the relevant conclusions are not completely consistent. Moreover, there are many constraints on the development of AASC (e.g., complex composition of raw materials of slag, large shrinkage deformation, and low fluidity). Therefore, further research is required.
文摘Cloud infrastructural resource optimization is the process of precisely selecting the allocating the correct resources either to a workload or application.When workload execution,accuracy,and cost are accurately stabilized in opposition to the best possible framework in real-time,efficiency is attained.In addition,every workload or application required for the framework is characteristic and these essentials change over time.But,the existing method was failed to ensure the high Quality of Service(QoS).In order to address this issue,a Tricube Weighted Linear Regression-based Inter Quartile(TWLR-IQ)for Cloud Infrastructural Resource Optimization is introduced.A Tricube Weighted Linear Regression is presented in the proposed method to estimate the resources(i.e.,CPU,RAM,and network bandwidth utilization)based on the usage history in each cloud server.Then,Inter Quartile Range is applied to efficiently predict the overload hosts for ensuring a smooth migration.Experimental results show that our proposed method is better than the approach in Cloudsim under various performance metrics.The results clearly showed that the proposed method can reduce the energy consumption and provide a high level of commitment with ensuring the minimum number of Virtual Machine(VM)Migrations as compared to the state-of-the-art methods.
文摘With the development of High-Speed Rail(HSR),countries and individual passengers alike have enjoyed far ranging benefits as a result-economic,social,environment and in added convenience.One of the important parts of HSR construction is the signaling system,where wireless communications play a key role in the transmission of train control data.Channel estimation has a significant impact on the quality of the wireless communication,however,whose performance is degraded due to the fast mobility of HSR.This paper focuses on the channel estimation technology in HSR.We first summarize the key challenges for HSR channel estimation,especially the Inter-Carrier Interference(ICI)faced by Orthogonal Frequency Division Multiplexing(OFDM)systems.Then we provide a comprehensive review of existing pilot-aided channel estimation schemes from three points:channel model,estimation algorithm,joint channel estimation and ICI mitigation schemes.Lastly,we present the challenges of channel estimation for the Orthogonal Time Frequency Space(OTFS)system and Reconfigurable Intelligent Surface(RIS),which are promising techniques for HSR systems in the future sixth Generation(6G)wireless communication.