A review on anode materials for lithium/sodium-ion batteries

Since lithium-ion batteries(LIBs) have been substantially researched in recent years, they now possess exceptional energy and power densities, making them the most suited energy storage technology for use in developed and developing industries like stationary storage and electric cars, etc. Concerns about the cost and availability of lithium have prompted research into alternatives, such as sodium-ion batteries(SIBs), which use sodium instead of lithium as the charge carrier. This is especially relevant for stationary applications, where the size and weight of battery are less important. The working efficiency and capacity of these batteries are mainly dependent on the anode, cathode, and electrolyte. The anode,which is one of these components, is by far the most important part of the rechargeable battery.Because of its characteristics and its structure, the anode has a tremendous impact on the overall performance of the battery as a whole. Keeping the above in view, in this review we critically reviewed the different types of anodes and their performances studied to date in LIBs and SIBs. The review article is divided into three main sections, namely:(i) intercalation reaction-based anode materials;(ii) alloying reaction-based anode materials;and(iii) conversion reaction-based anode materials, which are further classified into a number of subsections based on the type of material used. In each main section, we have discussed the merits and challenges faced by their particular system. Afterward, a brief summary of the review has been discussed. Finally, the road ahead for better application of Li/Na-ion batteries is discussed, which seems to mainly depend on exploring the innovative materials as anode and on the inoperando characterization of the existing materials for making them more capable in terms of application in rechargeable batteries.

Capacitive charge storage enables an ultrahigh cathode capacity in aluminum-graphene battery

Aluminum^-graphene battery is promising for its abundant raw materials,high power density,ultralong cycle life and superior safety.However,the development of aluminum^-graphene battery is currently restricted by its insufficient cathode capacity,calling for a newly developed working mechanism.In addition,an irregular constant increase of the cathode capacity was always observed during cycling,but cannot be explained based on the current understanding.Here,we observed an increase of specific capacity by 60%with stable Coulombic efficiency of 98%during 7000 cycles life of Al-graphene batteries employing AlCl3/ET3NHCl electrolyte.We demonstrated this growing cathode capacity is attributed to an increasing contribution of capacitive charge storage during cycling,because a gradually enlarged surface area as capacitive active sites is enabled by the exfoliation of graphitic cathode during the periodic intercalation process.Moreover,the graphene cathode was exfoliated more significantly in AlCl3/ET3NHCl than 1-ethyl-3-methylimidazolium chloride-based electrolyte,which results from the heavier stress on the graphene layers caused by the larger intercalants in AlCl3/ET3NHCl.The common intercalation of cations with AlCl4-clusters was therefore supposed to occur during charging.This new proposed mechanism can offer the new thought for future design on high-capacity cathode of Al-ion battery.

Research on mechanism of mountain landslide due to underground mining

The basics of mining landslides were first summed up based on the analysis ofactual materials by the application of mining subsidence and landslide theories. Further,the mechanism of along-layer landslide by mining was studied with the example of theXiangshan mining landslide at Hancheng, Shaanxi Province. Meanwhile, the state ofstress, and the mechanism of deformation and destruction of the Xiangshan mining slopewere analyzed by the Finite Element Method.

Intercalation Assembly Method and Intercalation Process Control of Layered Intercalated Functional Materials

Layered intercalated functional materials of layered double hydroxide type are an important class of functional materials developed in recent years. Based on long term studies on these materials in the State Key Laboratory of Chemical Resource Engineering in Beiiing University of Chemical Technology, the orinciole for the design of controlled intercalation processes in the light of tuture production processing requirements has been developed. Intercalation assembly methods and technologies have been invented to control the intercalation process for preparing layered intercalated materials with various structures and functions.

PREPARATION AND CHARACTERIZATION OF POLYAMIDE 11/CLAY NANOCOMPOSITES

Polyamide 11 (PA 11) is a widely used polyamide resin, but its application is limited since the impact properties, tensile strength, and thermal properties are not very satisfactory for industrial application. In order to improve the mechanical properties of PA 11, in this paper, the preparation of polyamide 11/clay nanocomposites (PACN) via in-situ intercalated polymerization was reported. SEM, TEM and XRD were employed to investigate the dispersion of clay sheet in the matrix. The results indicate that clay layers were homogeneously dispersed in PA11 matrix on a nano-scale, and an exfoliated and intercalated structure co-existed in the composites. The mechanical and thermal properties of the obtained nanocomposites were improved to certain extent by the addition of clay.

Numerical analysis of loess and weak intercalated layer failure behavior under direct shearing and cyclic loading

The mechanical behavior of the joints inside a loess layer is greatly important in weak intercalation studies owing to its involvement in a wide range of landslides in the loess region in China.The shear behavior of the joints in the loess stratum during direct shear and cyclic loadings was investigated using the PFC2D discrete element software.Loess mudstone and mudstone with weak intercalated layer materials were subjected to direct testing,and cyclic shear tests were conducted with consideration to the influence of normal stress and shear velocity.The macroscopic properties and damage patterns were obtained for six numerical configurations;namely,loess-weathered mudstone with 0°,10°,and-10°joints and weathered mudstone with 0°,10°,and-10°weak intercalated layers.The numerical test results revealed that,in the direct shear tests,the shear stress and shear displacement of the samples increased with the normal stress.In the cyclic shear tests with a total cycle number N=20,the shear stress-shear strain curve of the six different configurations exhibited a hysteresis loop.The numerical tests also revealed that,under cyclic shear,the normal stress and shear velocity affected the shear strength.The degree of damage increased as the shear velocity decreased from 0.1 mm/s to 0.005 mm/s for all six numerical configurations.Compared with the damage pattern of the direct shear tests,the damage of the cyclic shear tests mainly comprised shear cracks and fractures,some shaking consolidation settlement and fewer shear strain occurred around the joints.In the direct shear tests,more compression cracks and fractures occurred in the samples.The damage mainly developed along the joints,and shearing-off damage occurred.The results obtained by this study further elucidate the failure mechanism and microscopic damage response of the joints in the loess stratum in Northwest China.

Metallic vanadium trioxide intercalated with phase transformation for advanced aqueous zinc-ion batteries

Aqueous zinc-ion batteries have broad application prospects due to the eco-friendliness,cost-economy and high safety.However,the scarcity of high-performance cathodes with outstanding rate capability and long lifespan has affected their development.Herein,we report a metallic vanadium trioxide material intercalated with phase transformation as cathode applied in aqueous zinc-ion batteries.It offers satisfactory electrochemical performances with a high specific capacity(435 mAh g^(-1) at 0.5 A g^(-1)),decent power density(5.23 kW kg^(-1))and desired energy density(331 Wh kg^(-1)),as well as good cyclability.The superior performance originates from the stable structure and fast Zn^(2+)diffusion,enabled by the pre-intercalation of Zn^(2+)and water molecules.

Adsorption of CO_(2) on MgAl layered double hydroxides: Effect of intercalated anion and alkaline etching time

The adsorption of CO_(2) on MgAl layered double hydroxides(MgAl-LDHs) based adsorbents has been an effective way to capture CO_(2),however the adsorption capacity was hampered due to the pore structure and the dispersibility of adsorption active sites.To address the problem,we investigate the effect of intercalated anion and alkaline etching time on the structure,morphology and CO_(2) uptake performances of MgAl-LDHs.MgAl-LDHs are synthesized by the onepot hydrothermal method,followed by alkaline etching of NaOH,and characterized by x-ray diffraction,N_(2) adsorption,scanning electron microscopy and Fourier transform infrared spectroscopy.The CO_(2) adsorption tests of the samples are performed on a thermogravimetric analyzer,and the adsorption data are fitted by the first-order,pseudo-second-order and Elovich models,respectively.The results demonstrate that among the three intercalated samples,MgAl(Cl) using chloride salts as precursors possesses the highest adsorption capacity of CO_(2),owing to high crystallinity and porous structure,while MgAl(Ac) employing acetate salts as precursors displays the lowest CO_(2) uptake because of poor crystallinity,disorderly stacked structure and unsatisfactory pore structure.With regard to alkaline etching,the surface of the treated MgAl(Cl) is partly corroded,thus the specific surface area and pore volume increase,which is conducive to the exposure of adsorption active sites.Correspondingly,the adsorption performance of the alkaline-etched adsorbents is significantly improved,and MgAl(Cl)-6 has the highest CO_(2) uptake.With the alkaline etching time further increasing,the CO_(2) adsorption capacity of MgAl(Cl)-9 sharply decreases,mainly due to the collapse of pore structure and the fragmentized sheet-structure.Hence,the CO_(2) adsorption performance is greatly influenced by alkaline etching time,and appropriate alkaline etching time can facilitate the contact between CO_(2) molecules and the adsorbent.

Alterations in cell adhesion proteins and cardiomyopathy

Cell adhesive junction is specialized intercellular struc-ture composed of cell adhesion proteins. They are essential to connect adjacent heart muscle cell and make heart contraction effectively and properly. Clini-cal and genetic studies have revealed close relationship between cell adhesive proteins and the occurrence of various cardiomyopathies. Here we will review recent development on the disease phenotype, potential cel-lular and molecular mechanism related to cell adhesion molecules, with particular disease pathogenesis learned from genetic manipulated murine models.

纳米贵金属插入的粘土用于催化选择性加氢反应(英文)

The use of clay minerals in the synthesis of nanosized noble metal particles to give increased catalytic activity was investigated. Nanosized platinum and ruthenium catalysts intercalated in clay (montmorillonite/hectorite) were synthesised and their catalytic activity was evaluated for the selective hydrogenation of three different α,β-unsaturated aldehydes, namely, crotonaldehyde, cinnamaldehyde, and citral, in a gas phase microreactor. The metal nano-sol was prepared by the chemical reduction of its precursor by the micellar technique in the presence of cetyl trimethyl ammonium bromide (CTAB), and the micelle stabilized metal particles were intercalated in the clay mineral by ion exchange. TEM micrographs of the catalyst particles showed that the metal particles were in the nanometre range. The average diameters of the particles were 1-25 nm. The effects of temperature, metal loading, and hydrogen flow rate on the catalytic activity and selectivity for α,β- unsaturated alcohol were studied. The results were correlated with the structural properties of the catalysts. The products formed in each reaction over the different catalysts showed that the catalysts were very active for hydrogenation, and the selectivity for the desired product, namely, α,β-unsaturated alcohol, was good. The metal catalysts intercalated in montmorillonite showed better selectivity than that in hectorite because of its higher acidity. Increased selectivity for α,β-unsaturated alcohol was observed with increased flow rate of hydrogen.

Critical roles of molybdate anions in enhancing capacitive and oxygen evolution behaviors of LDH@PANI nanohybrids

Low-overpotential layered hydroxides(LDHs)with high theoretical capacity are promising electrodes for supercapaterry and oxygen evolution reaction;however,the low electronic conductivity and insufficient active sites of bulk LDHs increase the internal resistance and reduce the capacity and oxygen-production efficiency of electrodes.Herein,we prepared a polyaniline-coated Ni-Co-layered double hydroxide intercalated with MoO_(4)^(2−)(M-LDH@PANI)composite electrode using a two-step method.As the amount of MoO_(4)^(2−)in the LDH increases,acicular microspheres steadily evolve into flaky microspheres with a high surface area,providing more active electrochemical sites.Moreover,the amorphous PANI coating of M-LDH boosts the electronic conductivity of the composite electrode.Accordingly,the M-LDH@PANI at an appropriate level of MoO_(4)^(2−)exhibits significantly enhanced energy storage and catalytic performance.Experimental analyses and theoretical calculations reveal that a small amount of MoO_(4)^(2−)is conducive to the expansion of LDH interlayer spacing,while an excessive amount of MoO_(4)^(2−)combines with the H atoms of LDH,thus competing with OH^(−),resulting in reduced electrochemical performance.Moreover,M-LDH flaky microspheres can efficiently modulate deprotonation energy,greatly accelerating surface redox reactions.This study provides an explanation for an unconventional mechanism,and a method for the modification of LDH-based materials for anion intercalation.

Composites on Base of the Ultradispersed Polytetrafluoroethylene and Graphite Oxide Intercalated Compounds

Composites based on ultradispersed polytetrafluoroethylene and intercalated graphite oxide compounds with dodecahydro-closo-dodecaborates and methods of their fabrication have been developed. The fabricated composites have been characterized using XRD analysis, and optical microscopy. These composites are distinguished with completeness of their combustion, since the combustion products comprise gaseous boron fluorine-containing compounds of boron, boron trifluoride (BF3), and boron oxyfluoride ((BOF)3). Besides, these composites are characterized with increased energy capacity as compared to purely oxygen-containing compounds, since the heat of formation of boron fluorine-containing compounds is higher than that of boron oxide. Introduction of ultradispersed polytetrafluoroethylene imparts composites with hydrophobicity, thus improving their functioning properties.

Aqueous Zn-MnO_(2) battery: Approaching the energy storage limit with deep Zn^(2+) pre-intercalation and revealing the ions insertion/extraction mechanisms

Rechargeable aqueous zinc ion batteries(AZIBs)were considered as one of the most promising candidates for large-scale energy storage due to the merits of high safety and inexpensiveness.As AZIBs cathode material,Mn O_(2)possesses great merits but was greatly hindered due to the sluggish diffusion kinetic of Zn^(2+) during electrochemical operations.Herein,deep Zn^(2+) ions intercalatedδ-Mn O_(2)(Zn-Mn O_(2))was achieved by the in situ electrochemical deposition route,which significantly enhanced the diffusion ability of Zn^(2+) due to the synergistic effects of Zn^(2+) pillars and structural H;O.The resultant Zn-Mn O_(2)based AZIBs delivers a record capacity of 696 m Ah/g(0.5 m Ah/cm^(2))based on the initial mass loading,which is approaching the theoretical capacity of Mn O_(2)with a two-electrons reaction.In-situ Raman studies reveal highly reversible Zn^(2+)ions insertion/extraction behaviors and here the Zn-Mn O_(2)plays the role of a container during the charge–discharge process.Further charge storage mechanism investigations point out the insertion/extraction of Zn^(2+) and H^(+) coincides,and such process is significantly facilitated results from superior interlayered configurations of Zn-Mn O_(2)The excellent electrochemical performance of Zn-Mn O_(2)achieved in this work suggests the deep ions pre-intercalation strategy may aid in the future development of advanced cathodes for AZIBs.

Relationship between Atrial Tissue Remodeling and ECG Features in Atrial Fibrillation

The difference in the atrial organizational structure between patients with atrial fibrillation (AF) and those with sinus rhythm was investigated.In order to analyze the rationality in explaining the electrocardiogram (ECG) characteristics of AF with statistics data or tissue remodeling model,and the logical relationship between the hypothesis of pulmonary veins (PV) muscle sleeves and that of multi wavelets in mechanism of AF,we examined the expression of collagen volume fraction of type I (CVF-I ) with picrosirius red staining,connexin 40 (Cx40) by immunohistochemistry,and intercalated disc (ID) using transmission electron microscope in atrial tissue.The results showed that there was significant difference in the expression of CVF-I (t=3.827,P<0.01),Cx40 (t=4.21,P<0.01),and groups of the ID that keeping the electrical transmission and atrial electrical coupling synchronization (t=15.116,P<0.001),but no significant difference was found in total IDs (t=0.611,P=0.543) between patients with AF and those with sinus rhythm.The quantitative differences in the tissue remodeling could not explain the ECG characteristics of AF.The number of normal IDs and abnormal distribution are the structural basis to trigger and maintain atrial electrical remodeling,and induce and maintain AF.Such histological reconstruction supports the hypothesis of multi wavelets and can also explain ECG features.

Hybrid intercalated duct lesion of the parotid:A case report

BACKGROUND Intercalated duct lesions(IDLs)are considered relatively benign and rare tumors of salivary glands,that were only described recently.Their histopathological appearance may range from ductal hyperplasia to encapsulated adenoma with hybrid patterns of both variants.It is thought that IDLs may be the precursor for malignant proliferations,therefore their correct diagnosis remains crucial for proper lesion management.It is the first reported IDL case arising from the accessory parotid gland(APG),which stands for less frequent but higher malignancy rate tumor developmental area.CASE SUMMARY A 24-years-old male with no accompanying diseases was referred to the hospital with a painless nodule on the right cheek.On physical examination,the stiff,immobile,and painless mass was palpable in the anterior portion of the right parotideomasseteric region,just superior to the parotid duct.Ultrasound examination demonstrated 1.5 cm×1.0 cm hypoechogenic mass on the anterior part of the right parotid gland.Ultrasound-guided fine needle aspiration cytology,followed by liquid-based fine needle aspiration biopsy were performed.However,the results were uninformative.A contrast-enhanced magnetic res-onance imaging(MRI)of the parotid was obtained,demonstrating a 1.5 cm×1.0 cm×0.5 cm tumor with high intensity capsule together with low intensity core in the very anterior part of right superficial lobe,situated in the APG.An MRI features were uncharacteristic to common parotid tumors,therefore surgical resection followed up.After histopathological examination,the final diagnosis of hybrid IDL was confirmed.CONCLUSION Fine needle aspiration biopsy might not always be diagnostic,and given the malignant potential,the surgical resection of such lesion remains the treatment of choice.

Unsaturated Creep Behaviors of Weak Intercalated Soils in Soft Rock of Badong Formation

The cutting slopes in soft rock of redbed appeared in Yichang-Badong highway often suffer from the instability along weak intercalations, so the creep behaviors of weak intercalated soils are crucially important for the stability of cutting slopes. Because the deformation of weak intercalated soils is significantly affected by water content due to the strong water sensitivity, it is necessary to study the influence of matric suction on the creep behaviors of weak intercalated soils. In order to find out the unsaturated creep characters of weak intercalated soils, a GDS unsaturated triaxial apparatus was used. Then the triaxial creep experiments on weak intercalated soil samples under varying matric suction were conducted to obtain the unsaturated creep curves. The results show that the weak intercalated soils have obvious creep behaviors, and the creep strain is in nonlinear relationship with stress and time. When the matric suction is constant, a larger deviator stress will lead to a larger creep strain; When the deviator stress is constant, a smaller matric suction will lead to a larger creep strain. Based on the Mesri creep model, an improved creep model for weak intercalated soils under varying matric suction was established, in which the relationship of stress-strain was expressed with a hyperbolic function, and the relationship of strain-time was expressed with power functions in stages. Then an unsaturated creep model including stress-matric suction-strain-time for weak intercalated soils was established based on the power function relationship between matric suction and Ed(a parameter of the improved creep model). The comparison of the calculated values of creep model and the experimental values shows that the creep behaviors of weak intercalated soils can be predicted by the unsaturated creep model by and large.

Synthesis and Characterization of Exfoliated Graphite/ABS Composites

Exfoliated graphite was prepared by chemical route and then further subjected to thermal oxidation and sonication for size reduction and increased interlayer spacing in natural flake graphite. Exfoliated graphite/ABS composites were pre-pared with varying filler concentration by solution casting method. Exfoliated graphite and composites were character-ised by scanning electron microscopy and energy dispersive X-ray analysis, Fourier transform infrared spectroscopy and X-ray diffractometry techniques. After thermal exfoliation significant peak of graphite at 2? = 26.4? disappeared completely, confirming successful exfoliation of graphite. SEM images revealed homogeneous dispersion of exfoliated graphite in the matrix and EDAX confirmed successful reduction of graphite oxide.

EFFECT OF AMPHIPHILIC POLY (STYRENE-B-ETHYLENE OXIDE) DIBLOCK COPOLYMER INTERCALATED LAYERED SILICATE AS FILLER ON ACRYLONITRILE-BUTADIENE-STYRENE RESIN

The diblock copolymers intercalated layered silicate was prepared via a melt dispersion technique. Then the effect of intercalated hybrid as filler on acrylonitrile- butadiene-styrene resin was characterized by X-ray diffraction, transmission electron microscopy, stress-strain measurements in elongation.

Intercalation Assembly and Chemical Product Engineering of Layered Intercalated Functional Materials Based on Efficient Utilization of Magnesium Resources in Salt Lakes

1 Introduction Magnesium salts are very important by-product of salt lake industry in West China.Nearly 200 million cubic meters of waste brine are released to the environment

OPTIMIZATION OF THE METHOD OF SELECTING THE TOOTH NUMBER SERIES IN A SET OF CHANGE GEARS Part Ⅱ The Rules for Permuting the DBL’s of the First Order and Their Intercalated Sets

The problem in practice of determining the proper combination of Zi in a set of changegears may be abstracted to the problem of finding the proper combination and permutation ofthe elements ai,i+1 of the set A1 to give maximum M-d. Some results to find optimal combina-tions of the elements of the set A1 have been reported in part I. In this part, some rules forpermuting these elements are introduced. By means of these rules, three kinds of intercalated setsof A1 have been found, namely: （1） Sets with an even left wing, （2） Sets with coincidence of bothwings, and （3） Sets with circulated elements.