Multiple Tin Compounds Modified Carbon Fibers to Construct Heterogeneous Interfaces for Corrosion Prevention and Electromagnetic Wave Absorption

Currently,the demand for electromagnetic wave(EMW)absorbing materials with specific functions and capable of withstanding harsh environments is becoming increasingly urgent.Multi-component interface engineering is considered an effective means to achieve high-efficiency EMW absorption.However,interface modulation engineering has not been fully discussed and has great potential in the field of EMW absorption.In this study,multi-component tin compound fiber composites based on carbon fiber(CF)substrate were prepared by electrospinning,hydrothermal synthesis,and high-temperature thermal reduction.By utilizing the different properties of different substances,rich heterogeneous interfaces are constructed.This effectively promotes charge transfer and enhances interfacial polarization and conduction loss.The prepared SnS/SnS_(2)/SnO_(2)/CF composites with abundant heterogeneous interfaces have and exhibit excellent EMW absorption properties at a loading of 50 wt%in epoxy resin.The minimum reflection loss(RL)is−46.74 dB and the maximum effective absorption bandwidth is 5.28 GHz.Moreover,SnS/SnS_(2)/SnO_(2)/CF epoxy composite coatings exhibited long-term corrosion resistance on Q235 steel surfaces.Therefore,this study provides an effective strategy for the design of high-efficiency EMW absorbing materials in complex and harsh environments.

Analysis of Micromechanical Properties at the Interface of Pre-wet SBS Modified Asphalt Mixture Based on Molecular Simulation Technology

The pre-wetting of aggregate surface is a means to improve the interface performance of SBS modified asphalt and aggregate.The effect of pre-wetting technology on the interaction between SBS modified asphalt and aggregate was analyzed by molecular dynamics simulation.The diffusion coefficient and concentration distribution of SBS modified asphalt on aggregate surface are included.The simulation results show that the diffusion coefficient of the aggregate surface of SBS modified asphalt is increased by 47.6%and 70.5%respectively after 110#asphalt and 130#asphalt are pre-wetted.The concentration distribution of SBS modified asphalt on the aggregate surface after pre-wetting is more uniform.According to the results of interface energy calculation,the interface energy of SBS modified bitumen and aggregate can be increased by about 5%after pre-wetting.According to the results of molecular dynamics simulation,the pre-wetting technology can effectively improve the interface workability of SBS modified bitumen and aggregate,so as to improve the interface performance.

Bulging Performance and Quality Control of Aluminum Alloy Tailor-welded Overlapping Sheets Based on Interface Friction

In order to solve the problem of poor formability caused by different materials and properties in the process of tailor-welded sheets forming,a forming method was proposed to change the stress state of tailor-welded sheets by covering the tailor-welded sheets with better plastic properties overlapping sheets.At the same time,the interface friction effect between the overlapping and tailor-welded sheets was utilized to control the stress magnitude and further improve the formability and quality of the tailor-welded sheets.In this work,the bulging process of the tailor-welded overlapping sheets was taken as the research object.Aluminum alloy tailor-welded overlapping sheets bulging specimens were studied by a combination of finite element analysis and experimental verification.The results show that the appropriate use of interface friction between tailor-welded and overlapping sheets can improve the formability of tailor-welded sheets and control the flow of weld seam to improve the forming quality.When increasing the interface friction coefficient on the side of tailor-welded sheets with higher strength and decreasing that on the side of tailor-welded sheets with lower strength,the deformation of the tailor-welded sheets are more uniform,the offset of the weld seam is minimal,the limit bulging height is maximal,and the forming quality is optimal.

Research status and prospects of the fractal analysis of metal material surfaces and interfaces

As a mathematical analysis method,fractal analysis can be used to quantitatively describe irregular shapes with self-similar or self-affine properties.Fractal analysis has been used to characterize the shapes of metal materials at various scales and dimensions.Conventional methods make it difficult to quantitatively describe the relationship between the regular characteristics and properties of metal material surfaces and interfaces.However,fractal analysis can be used to quantitatively describe the shape characteristics of metal materials and to establish the quantitative relationships between the shape characteristics and various properties of metal materials.From the perspective of two-dimensional planes and three-dimensional curved surfaces,this paper reviews the current research status of the fractal analysis of metal precipitate interfaces,metal grain boundary interfaces,metal-deposited film surfaces,metal fracture surfaces,metal machined surfaces,and metal wear surfaces.The relationship between the fractal dimensions and properties of metal material surfaces and interfaces is summarized.Starting from three perspectives of fractal analysis,namely,research scope,image acquisition methods,and calculation methods,this paper identifies the direction of research on fractal analysis of metal material surfaces and interfaces that need to be developed.It is believed that revealing the deep influence mechanism between the fractal dimensions and properties of metal material surfaces and interfaces will be the key research direction of the fractal analysis of metal materials in the future.

Advanced Functional Electromagnetic Shielding Materials:A Review Based on Micro‑Nano Structure Interface Control of Biomass Cell Walls

Research efforts on electromagnetic interference(EMI)shielding materials have begun to converge on green and sustainable biomass materials.These materials offer numerous advantages such as being lightweight,porous,and hierarchical.Due to their porous nature,interfacial compatibility,and electrical conductivity,biomass materials hold significant potential as EMI shielding materials.Despite concerted efforts on the EMI shielding of biomass materials have been reported,this research area is still relatively new compared to traditional EMI shielding materials.In particular,a more comprehensive study and summary of the factors influencing biomass EMI shielding materials including the pore structure adjustment,preparation process,and micro-control would be valuable.The preparation methods and characteristics of wood,bamboo,cellulose and lignin in EMI shielding field are critically discussed in this paper,and similar biomass EMI materials are summarized and analyzed.The composite methods and fillers of various biomass materials were reviewed.this paper also highlights the mechanism of EMI shielding as well as existing prospects and challenges for development trends in this field.

Effect of Progressive Substitution of Cement and Lime by Powdered Shells Used as a Curing Agent for Dredged Soil in a Port Area

This study aimed to address the challenges of solid waste utilization,cost reduction,and carbon reduction in the treatment of deep-dredged soil at Xuwei Port in Lianyungang city of China.Past research in this area was limited.Therefore,a curing agent made from powdered shells was used to solidify the dredged soil in situ.We employed laboratory orthogonal tests to investigate the physical and mechanical properties of the powdered shell-based curing agent.Data was collected by conducting experiments to assess the role of powdered shells in the curing process and to determine the optimal ratios of powdered shells to solidified soil for different purposes.The development of strength in solidified soil was studied in both seawater and pure water conditions.The study revealed that the strength of the solidified soil was influenced by the substitution rate of powdered shells and their interaction with cement.Higher cement content had a positive effect on strength.For high-strength solidified soil,the recommended ratio of wet soil:cement:lime:powdered shells were 100:16:4:4,while for low-strength solidified soil,the recommended ratio was 100:5.4:2.4:0.6.Seawater,under appropriate conditions,improved short-term strength by promoting the formation of expansive ettringite minerals that contributed to cementation and precipitation.These findings suggest that the combination of cement and powdered shells is synergistic,positively affecting the strength of solidified soil.The recommended ratios provide practical guidance for achieving desired strength levels while considering factors such as cost and carbon emissions.The role of seawater in enhancing short-term strength through crystal formation is noteworthy and can be advantageous for certain applications.In conclusion,this research demonstrates the potential of using a powdered shell-based curing agent for solidifying dredged soil in an environmentally friendly and cost-effective manner.The recommended ratios for different strength requirements offer valuable insights for practical applications in the field of soil treatment,contributing to sustainable and efficient solutions for soil management.

Plates, Beams and Shells Reinforced by CNTs or GPLs: A Review on Their Structural Behavior and Computational Methods

Since the initial observation of carbon nanotubes(CNTs)and graphene platelets(GPLs)in the 1990 and 2000s,the demand for high-performance structural applications and multifunctional materials has driven significant interest in composite structures reinforced with GPLs and CNTs.Incorporating these nanofillers into matrix materials markedly enhances the mechanical properties of the structures.To further improve efficiency and functionality,func-tionally graded(FG)distributions of CNTs and GPLs have been proposed.This study presents an extensive review of computational approaches developed to predict the global behavior of composite structural components enhanced with CNT and GPL nanofillers.The analysis focuses on key structural elements,such as plate-type configurations,cylindrical and curved shells,and beams,emphasizing the computational techniques utilized to simulate their mechanical behavior.The utilization of three-dimensional elasticity theories and equivalent single-layer(ESL)frameworks,which are widely employed in the modeling and analysis of these composites,is comprehensively discussed.Additionally,the paper examines various mechanical performance aspects,including static,buckling,post-buckling,vibrational,and dynamic responses for the mentioned structures.The unique features of hybrid nanocomposites,combining CNTs and GPLs,are also analyzed.Furthermore,the study delves into the fabrication and processing techniques of these materials,with a particular focus on strategies to mitigate nanofiller agglomeration.The review extends to cover thermal and electrical properties,durability under environmental exposure,fatigue resistance,and vibration-damping characteristics.In conclusion,the paper underscores the necessity for ongoing advancements in computational modeling to facilitate improved design,analysis,and optimization of nanocomposite structures.Future research opportunities in this rapidly advancing domain are also outlined.

Pore-scale investigation of forced imbibition in porous rocks through interface curvature and pore topology analysis

Forced imbibition,the invasion of a wetting fluid into porous rocks,plays an important role in the effective exploitation of hydrocarbon resources and the geological sequestration of carbon dioxide.However,the interface dynamics influenced by complex topology commonly leads to non-wetting fluid trapping.Particularly,the underlying mechanisms under viscously unfavorable conditions remain unclear.This study employs a direct numerical simulation method to simulate forced imbibition through the reconstructed digital rocks of sandstone.The interface dynamics and fluid–fluid interactions are investigated through transient simulations,while the pore topology metrics are introduced to analyze the impact on steady-state residual fluid distribution obtained by a pseudo-transient scheme.The results show that the cooperative pore-filling process promoted by corner flow is dominant at low capillary numbers.This leads to unstable inlet pressure,mass flow,and interface curvature,which correspond to complicated interface dynamics and higher residual fluid saturation.During forced imbibition,the interface curvature gradually increases,with the pore-filling mechanisms involving the cooperation of main terminal meniscus movement and arc menisci filling.Complex topology with small diameter pores may result in the destabilization of interface curvature.The residual fluid saturation is negatively correlated with porosity and pore throat size,and positively correlated with tortuosity and aspect ratio.A large mean coordination number characterizing global connectivity promotes imbibition.However,high connectivity characterized by the standardized Euler number corresponding to small pores is associated with a high probability of non-wetting fluid trapping.

考虑二阶邻居信息的K-shell重要节点识别算法研究

在真实网络中,找出一些关键的节点进行保护能够有效维持系统的稳定,同时对于复杂网络中的病毒控制与传播、交通网络的故障控制、社交网络中影响力识别等都有重要作用。在现有关键节点识别算法K-shell的基础上,提出了一种考虑二阶邻居信息的K-shell的关键节点识别算法,该算法综合考虑节点的全局与局部信息,同时引入节点的一阶邻居节点和二阶邻居节点的相关信息,计算节点在网络中的重要性。为了验证该算法的性能,以随机攻击和蓄意攻击两种攻击方式在网络中的节点进行仿真实验,实验结果表明,考虑二阶邻居信息的K-shell方法能够有效地检测节点的重要性,识别网络中的关键节点。

基于SHELL模型的航空货物运输安全问题研究

文章阐述了SHELL 模型的基本理论,分析了航空货物运输的基本流程及常见安全问题,应用SHELL模型重点探究航空货物运输中人与硬件(L-H)、人与软件(L-S)、人与环境(L-E)及人与人(L-L)的要素特征与关系界面,梳理引发安全问题导致不安全事件的原因,提出缩小关系界面空隙、提高关系匹配度的措施,保障航空货物运输安全,促进航空货运持续稳定发展。

基于邻域K-shell分布的关键节点识别方法

复杂网络中关键节点的精准识别对于网络结构稳定和信息传播起着至关重要的作用。传统K-shell方法仅通过节点在网络中所处位置对节点的重要性进行评估,导致区分度不高。基于此,综合考虑了节点的全局信息和局部信息对节点重要性的影响,提出一种基于邻域K-shell分布的关键节点识别方法。该方法通过节点邻域Ks值定义节点的熵,从而反映邻居节点的K-shell分布特征。通过11个网络数据集上的仿真实验,验证了所提方法能够更准确地识别并区分复杂网络中的关键节点。

基于Shell脚本的KVM虚拟化技术应用

虚拟化技术是当前计算机信息技术中一个新的变革,其中开源的虚拟化技术(Kernel-Based Virtual Machines,KVM)更是以稳定、高效、经济而著称,为科学研究、工程仿真等领域提供了强大的计算能力。文章以某高职院校虚拟化应用为实例,探讨在普通高职院校的虚拟化技术应用管理中使用Shell脚本进行智能化管理,并展示其技术用于云平台辅助管理的优势,为用户轻便智能管理KVM虚拟化技术应用提供参考。

The study of the adductor muscle-shell interface structure in three Mollusc species

The adductor muscle scar（AMS） is the fixation point of adductor muscle to the shell. It is an important organicinorganic interface and stress distribution area. Despite recent advances, our understanding of the structure and composition of the AMS remain limited. Here, we report study on the AMS of three bivalves： Mytilus coruscus,Chlamys farreri and Ruditapes philippinarum. Results showed that there were significant differences among their AMS structures. Both M. coruscus and C. farreri were found to have a columnar layer above the nacreous platelet shell structure at the AMS and this layer was more organized in M. coruscus. There was no distinguishable twolayer structure in R. philippinarum. Atomic force microscopy（AFM） and Fourier transform infrared spectroscopy（FT-IR） results showed that the AMS was much smoother than the nacreous inner shell in all the three species and the AMS had minor different compositions from the nacreous shell layer. SDS-PAGE（sodium dodecyl-sulfate polyacrylamide gel electophoresis） study of the proteins isolated from the interface indicated that there was a 70 k Da protein which seemed to be specifically located to the highly organized columnar AMS structure in Mytilus coruscus. Further analysis of this protein showed it contained high level of Asx（Asp＋Asn）, Glx（Glu＋Gln） and Gly.The special structure and composition of the AMS might play important roles in the stability, adhesion and function at this stress distribution site.

改进K-shell算法的城市道路网关键交叉口识别

交叉口重要性不仅与自身属性相关,还受相邻路段属性的影响,针对城市道路网中关键交叉口识别方法准确率不足的问题,提出一种考虑城市道路网特性的改进K-shell算法。即在传统K-shell算法基础上,综合考虑交叉口及其相邻路段的结构特性与交通特性,提出交叉口重要度的概念,利用CRITIC法确定交叉口重要度中相关指标的权重系数,对城市道路网中的交叉口进行重要性排序。以哈尔滨市二环内道路网为例,构建级联失效模型,分析随着失效交叉口比例的增加,不同排序方法下的网络效率、网络最大连通子图比率、故障节点比率的波动情况,结果表明,改进K-shell算法能够更加有效地识别城市道路网关键交叉口。

Vacancies and interfaces engineering of core-shell heterostuctured NiCoP/NiO as trifunctional electrocatalysts for overall water splitting and zinc-air batteries

The electronic structures and properties of electrocatalysts,which depend on the physicochemical structure and metallic element components,could significantly affect their electrocatalytic performance and their future applications in Zn-air battery(ZAB)and overall water splitting(OWS).Here,by combining vacancies and heterogeneous interfacial engineering,three-dimensional(3D)core-shell NiCoP/NiO heterostructures with dominated oxygen vacancies have been controllably in-situ grown on carbon cloth for using as highly efficient electrocatalysts toward hydrogen and oxygen electrochemical reactions.Theoretical calculation and electrochemical results manifest that the hybridization of NiCoP core with NiO shell produces a strong synergistic electronic coupling effect.The oxygen vacancy can enable the emergence of new electronic states within the band gap,crossing the Fermi levels of the two spin components and optimizing the local electronic structure.Besides,the hierarchical core-shell NiCoP/NiO nanoarrays also endow the catalysts with multiple exposed active sites,faster mass transfer behavior,optimized electronic strutures and improved electrochemical performance during ZAB and OWS applications.

Cl/S与Na相互作用对Shell气化炉合成气冷却器入口积灰机制的影响

Shell干粉煤加压气化是煤炭洁净高效利用的重要技术之一,由碱金属化合物引起的合成气冷却器入口积灰结垢是导致气化炉非正常停工检修的主要原因。以添加不同含量的Na、Cl和S的Shell气化炉飞灰为原料,利用自主设计的高温竖直炉中沉积探针模拟Shell气化炉合成气冷却器入口管路,通过对积灰进行内、外分层研究,探讨内外层积灰质量的变化,并结合ICP-MS、IC、SEM-EDS和XRD等表征手段对内外层积灰的理化性质进行比较分析,获得Na、Cl、S和Fe等不同元素之间的相互作用对积灰行为的影响。结果表明,内层积灰质量随时间延长而增大,含S化合物的添加会降低内外层积灰质量,且外层积灰质量会随着时间延长而减小。Na更多以铝硅酸盐形式在外层积灰中存在,促进积灰增长;Cl通常以碱金属氯化物的形式集中在初始黏性层;S的存在会减缓管路积灰;当Cl和S共同存在时,Fe易与灰中的Si、Al和Na形成多种低温共熔物促进内、外层积灰熔融。Shell气化炉合成气冷却器入口积灰形成机制为:飞灰颗粒组分在Na、Cl、Si和Al的共同作用下,于内层形成碱金属氯化物和铝硅酸盐共晶;同时Cl、S的存在促使Fe和Na迁移到这些共晶中,形成Fe-O-Si、Fe-O-S和Fe-Na-O-Al-S共熔体。进而,铝硅酸盐与多种低温共熔体相互熔融使灰颗粒尺寸增加,促进积灰的进一步生长。

Interface Engineering of Titanium Nitride Nanotube Composites for Excellent Microwave Absorption at Elevated Temperature

Currently,the microwave absorbers usually suffer dreadful electromagnetic wave absorption(EMWA)performance damping at elevated temperature due to impedance mismatching induced by increased conduction loss.Consequently,the development of high-performance EMWA materials with good impedance matching and strong loss ability in wide temperature spectrum has emerged as a top priority.Herein,due to the high melting point,good electrical conductivity,excellent environmental stability,EM coupling effect,and abundant interfaces of titanium nitride(TiN)nanotubes,they were designed based on the controlling kinetic diffusion procedure and Ostwald ripening process.Benefiting from boosted heterogeneous interfaces between TiN nanotubes and polydimethylsiloxane(PDMS),enhanced polarization loss relaxations were created,which could not only improve the depletion efficiency of EMWA,but also contribute to the optimized impedance matching at elevated temperature.Therefore,the TiN nanotubes/PDMS composite showed excellent EMWA performances at varied temperature(298-573 K),while achieved an effective absorption bandwidth(EAB)value of 3.23 GHz and a minimum reflection loss(RLmin)value of−44.15 dB at 423 K.This study not only clarifies the relationship between dielectric loss capacity(conduction loss and polarization loss)and temperature,but also breaks new ground for EM absorbers in wide temperature spectrum based on interface engineering.

Efficient Electromagnetic Wave Absorption and Thermal Infrared Stealth in PVTMS@MWCNT Nano‑Aerogel via Abundant Nano‑Sized Cavities and Attenuation Interfaces

Pre-polymerized vinyl trimethoxy silane(PVTMS)@MWCNT nano-aerogel system was constructed via radical polymerization,sol-gel transition and supercritical CO_(2)drying.The fabricated organic-inorganic hybrid PVTMS@MWCNT aerogel structure shows nano-pore size(30-40 nm),high specific surface area(559 m^(2)g^(−1)),high void fraction(91.7%)and enhanced mechanical property:(1)the nano-pore size is beneficial for efficiently blocking thermal conduction and thermal convection via Knudsen effect(beneficial for infrared(IR)stealth);(2)the heterogeneous interface was beneficial for IR reflection(beneficial for IR stealth)and MWCNT polarization loss(beneficial for electromagnetic wave(EMW)attenuation);(3)the high void fraction was beneficial for enhancing thermal insulation(beneficial for IR stealth)and EMW impedance match(beneficial for EMW attenuation).Guided by the above theoretical design strategy,PVTMS@MWCNT nano-aerogel shows superior EMW absorption property(cover all Ku-band)and thermal IR stealth property(ΔT reached 60.7℃).Followed by a facial combination of the above nano-aerogel with graphene film of high electrical conductivity,an extremely high electromagnetic interference shielding material(66.5 dB,2.06 mm thickness)with superior absorption performance of an average absorption-to-reflection(A/R)coefficient ratio of 25.4 and a low reflection bandwidth of 4.1 GHz(A/R ratio more than 10)was experimentally obtained in this work.

Mechanical Performance of Bio-inspired Bidirectional Corrugated Sandwich Pressure Shell Under External Hydrostatic Pressure

This paper aims to enhance the compression capacity of underwater cylindrical shells by adopting the corrugated sandwich structure of cuttlebone.The cuttlebone suffers uniaxial external compression,while underwater cylindrical shells are in a biaxial compressive stress state.To suit the biaxial compressive stress state,a novel bidirectional corrugated sandwich structure is proposed to improve the bearing capacity of cylindrical shells.The static and buckling analysis for the sandwich shell and the unstiffened cylindrical shell with the same volume-weight ratio are studied by numerical simulation.It is indicated that the proposed sandwich shell can effectively reduce the ratio between circumferential and axial stress from 2 to 1.25 and improve the critical buckling load by about 1.63 times.Numerical simulation shows that optimizing and adjusting the structural parameters could significantly improve the advantage of the sandwich shell.Then,the hydrostatic pressure tests for shell models fabricated by 3D printing are carried out.According to the experimental results,the overall failure position of the sandwich shell is at the center part of the sandwich shell.It has been found the average critical load of the proposed sandwich shell models exceeds two times that of the unstiffened shell models.Hence,the proposed bio-inspired bidirectional corrugated sandwich structure can significantly enhance the pressure resistance capability of cylindrical shells.

INTERFACE BEHAVIOR AND DECAY RATES OF COMPRESSIBLE NAVIER-STOKES SYSTEM WITH DENSITY-DEPENDENT VISCOSITY AND A VACUUM

In this paper,we study the one-dimensional motion of viscous gas near a vacuum,with the gas connecting to a vacuum state with a jump in density.The interface behavior,the pointwise decay rates of the density function and the expanding rates of the interface are obtained with the viscosity coefficientμ(ρ)=ρ^(α)for any 0<α<1;this includes the timeweighted boundedness from below and above.The smoothness of the solution is discussed.Moreover,we construct a class of self-similar classical solutions which exhibit some interesting properties,such as optimal estimates.The present paper extends the results in[Luo T,Xin Z P,Yang T.SIAM J Math Anal,2000,31(6):1175-1191]to the jump boundary conditions case with density-dependent viscosity.