In situ Investigations of Interfacial Degradation and Ion Migration at CH3NH3PbI3 Perovskite/Ag Interfaces

Interfacial properties between perovskite layers and metal electrodes play a crucial role in the device performance and the long-term stability of perovskite solar cells.Here,we report a comprehensive study of the interfacial degradation and ion migration at the interface between CH3NH3PbI3 perovskite layer and Ag electrode.Using in situ photoemission spectroscopy measurements,we found that the Ag electrode could induce the degradation of perovskite layers,leading to the formation of PbI2 and AgI species and the reduction of Pb^2+ions to metallic Pb species at the interface.The unconventional enhancement of the intensities of I 3d spectra provides direct experimental evidences for the migration of iodide ions from CH3NH3PbI3 subsurface to Ag electrode.Moreover,the contact of Ag electrode and perovskite layers induces an interfacial dipole of 0.3 eV at CH3NH3PbI3/Ag interfaces,which may further facilitate iodide ion diffusion,resulting in the decomposition of perovskite layers and the corrosion of Ag electrode.

In-situ nanoscale insights into the evolution of solid electrolyte interphase shells:revealing interfacial degradation in lithium metal batteries

The solid electrolyte interphase(SEI)has caught considerable attention as a pivotal factor affecting lithium(Li)metal battery performances.However,the understanding of the interfacial evolution and properties of the on-site formed SEI shells on Li deposits during cycling is still at a preliminary stage.Here,we provide a straightforward visualized evidence of SEI shells’evolution during Li deposition/stripping to reveal anode degradation via in-situ atomic force microscopy(AFM).Nucleation and growth of quasi-spherical Li particles are observed on a Cu substrate,followed by Li stripping and collapse of SEI shells.In the subsequent cycling,new Li deposits tend to nucleate at pristine sites with fresh SEI shells forming on Li.The previously collapsed SEI shells accumulate to increase interface impedance,eventually leading to capacity degradation.Revealing the electrochemical processes and interfacial degradation at the nanoscale will enrich fundamental comprehension and further guide improvement strategies of Li metal anodes.

Highly Efficient Aligned Ion‑Conducting Network and Interface Chemistries for Depolarized All‑Solid‑State Lithium Metal Batteries

Improving the long-term cycling stability and energy density of all-solid-state lithium(Li)-metal batteries(ASSLMBs)at room temperature is a severe challenge because of the notorious solid–solid interfacial contact loss and sluggish ion transport.Solid electrolytes are generally studied as two-dimensional(2D)structures with planar interfaces,showing limited interfacial contact and further resulting in unstable Li/electrolyte and cathode/electrolyte interfaces.Herein,three-dimensional(3D)architecturally designed composite solid electrolytes are developed with independently controlled structural factors using 3D printing processing and post-curing treatment.Multiple-type electrolyte films with vertical-aligned micro-pillar(p-3DSE)and spiral(s-3DSE)structures are rationally designed and developed,which can be employed for both Li metal anode and cathode in terms of accelerating the Li+transport within electrodes and reinforcing the interfacial adhesion.The printed p-3DSE delivers robust long-term cycle life of up to 2600 cycles and a high critical current density of 1.92 mA cm^(−2).The optimized electrolyte structure could lead to ASSLMBs with a superior full-cell areal capacity of 2.75 mAh cm^(−2)(LFP)and 3.92 mAh cm^(−2)(NCM811).This unique design provides enhancements for both anode and cathode electrodes,thereby alleviating interfacial degradation induced by dendrite growth and contact loss.The approach in this study opens a new design strategy for advanced composite solid polymer electrolytes in ASSLMBs operating under high rates/capacities and room temperature.