A widely used oxyanion corrosion inhibitor(Li2CrO4) was used as electrolyte additive(3.5 wt% Na Cl solution was used as electrolyte solution) for Mg–air battery. The potentiodynamic polarization tests showed that...A widely used oxyanion corrosion inhibitor(Li2CrO4) was used as electrolyte additive(3.5 wt% Na Cl solution was used as electrolyte solution) for Mg–air battery. The potentiodynamic polarization tests showed that the presence of 0.1 wt% Li2CrO4in the Na Cl electrolyte reduced enormously the corrosion current density of the tested AZ31 Mg alloys.According to the intermittent discharge tests, the use of 0.1 wt% Li2CrO4 as electrolyte additive increased the anode efficiency of the Mg–air battery by 28.4%. The addition of 0.1 wt% Li2CrO4reduced the anode self-corrosion rate of the battery in the intermittent stage effectively. The product film after discharge was observed by scanning electron microscope, and the Mg–air battery containing 0.1 wt% Li2CrO4has a loose product film, which is beneficial to its discharge performance. So using Li2CrO4 as electrolyte additive could improve the intermittent discharge performance of Mg–air battery. And the use of oxyanion corrosion inhibitor as electrolyte additive may be an excellent way to improve the intermittent discharge performance of Mg–air battery.展开更多
A new phenomenon that a filament discharged only once instead of twice in a cycle of the applied voltage is observed in a square grid pattern in a dielectric barrier discharge(DBD)with a larger gas gap,which is named ...A new phenomenon that a filament discharged only once instead of twice in a cycle of the applied voltage is observed in a square grid pattern in a dielectric barrier discharge(DBD)with a larger gas gap,which is named intermittent discharge.Its spatiotemporal dynamics and the formation mechanism are studied by the multiple photomultiplier tubes and an intensified charge-coupled device.Corresponding to the positions of spots in the picture with an exposure time of 40 ms,there are some bright spots(discharge spots)and black spots(non-discharged spots)in the instantaneous image with an exposure time of 10μs(a half cycle of the applied voltage).There are at least two bright spots around one black spot and vice versa.The surface discharges(SDS)can be observed between any two adjacent spots.The intensity of the SDSbetween the bright spot and the black spot is 2.5 times greater than that between two adjacent bright spots,which indicates that the SDSare directional-selective.The intermittent discharge with positive(negative)current polarity changes to that with negative(positive)current polarity,after it sustains up to 14 voltage cycles at the longest.The spatial distribution of the electric field component is calculated through COMSOL software to solve the Poisson equation numerically.It is found that the inhomogeneous distribution of surface electric field is caused by the inhomogeneous distribution of wall charges,which leads to direction-selective SDS.The intermittent discharge is formed by the competition between the direction-selective SDSand volume discharges(VDS)in DBD.This is the reason why the intermittent discharge is generated.展开更多
Mg-0.5Sn-0.5Mn-0.5Ca(wt.%) alloys with different microstructures are designed through casting and extrusion with and without homogenization treatment prior to extrusion(HPE).The influence of HPE treatment on the micro...Mg-0.5Sn-0.5Mn-0.5Ca(wt.%) alloys with different microstructures are designed through casting and extrusion with and without homogenization treatment prior to extrusion(HPE).The influence of HPE treatment on the microstructural characteristics and resultant discharge properties of Mg-Sn-Mn-Ca alloy in extruded condition as anode for Mg-air battery was investigated.HPE treatment exerts a prominent effect on the grain structure and orientation,distribution of the second phase particles as well as the dislocation density of the extruded alloy.The HPE alloy exhibits a distinctly high cell voltage together with specific energy compared with that of Non-HPE one.Intermittent discharge tests confirm that the HPE alloy possesses a more excellent discharge activity and more stable discharge process than the NonHPE one.All results demonstrate that the HPE alloy is an attractive anode material for Mg-air battery with long-term storage and under intermittent discharge.展开更多
基金financially supported by the National Natural Science Foundation of China (No. 51531002)Demonstrative Project of Chongqing Science and Technology Commission (No. CSCT2014FAZKTJCSF50004)Fundamental Research Funds for the Central Universities (No. CDJZR14130009)
文摘A widely used oxyanion corrosion inhibitor(Li2CrO4) was used as electrolyte additive(3.5 wt% Na Cl solution was used as electrolyte solution) for Mg–air battery. The potentiodynamic polarization tests showed that the presence of 0.1 wt% Li2CrO4in the Na Cl electrolyte reduced enormously the corrosion current density of the tested AZ31 Mg alloys.According to the intermittent discharge tests, the use of 0.1 wt% Li2CrO4 as electrolyte additive increased the anode efficiency of the Mg–air battery by 28.4%. The addition of 0.1 wt% Li2CrO4reduced the anode self-corrosion rate of the battery in the intermittent stage effectively. The product film after discharge was observed by scanning electron microscope, and the Mg–air battery containing 0.1 wt% Li2CrO4has a loose product film, which is beneficial to its discharge performance. So using Li2CrO4 as electrolyte additive could improve the intermittent discharge performance of Mg–air battery. And the use of oxyanion corrosion inhibitor as electrolyte additive may be an excellent way to improve the intermittent discharge performance of Mg–air battery.
基金National Natural Science Foundation of China(No.12075075)The Natural Science Foundation of Hebei Province,China(Nos.2020201016 and A2018201154).
文摘A new phenomenon that a filament discharged only once instead of twice in a cycle of the applied voltage is observed in a square grid pattern in a dielectric barrier discharge(DBD)with a larger gas gap,which is named intermittent discharge.Its spatiotemporal dynamics and the formation mechanism are studied by the multiple photomultiplier tubes and an intensified charge-coupled device.Corresponding to the positions of spots in the picture with an exposure time of 40 ms,there are some bright spots(discharge spots)and black spots(non-discharged spots)in the instantaneous image with an exposure time of 10μs(a half cycle of the applied voltage).There are at least two bright spots around one black spot and vice versa.The surface discharges(SDS)can be observed between any two adjacent spots.The intensity of the SDSbetween the bright spot and the black spot is 2.5 times greater than that between two adjacent bright spots,which indicates that the SDSare directional-selective.The intermittent discharge with positive(negative)current polarity changes to that with negative(positive)current polarity,after it sustains up to 14 voltage cycles at the longest.The spatial distribution of the electric field component is calculated through COMSOL software to solve the Poisson equation numerically.It is found that the inhomogeneous distribution of surface electric field is caused by the inhomogeneous distribution of wall charges,which leads to direction-selective SDS.The intermittent discharge is formed by the competition between the direction-selective SDSand volume discharges(VDS)in DBD.This is the reason why the intermittent discharge is generated.
基金jointly supported by the National Natural Science Foundation of China(Grant Nos.:51704209,51701060)Natural Science Foundation of Shanxi Province(Grant No.:201801D121088)+2 种基金Shanxi Province Science Foundation for Youths(Grant No.:2016021063)Shanxi Scholarship Council of China(Grant No.:2019032)the Science and Technology Major Project of Shanxi Province(Grant Nos.:20191102008,20191102007)。
文摘Mg-0.5Sn-0.5Mn-0.5Ca(wt.%) alloys with different microstructures are designed through casting and extrusion with and without homogenization treatment prior to extrusion(HPE).The influence of HPE treatment on the microstructural characteristics and resultant discharge properties of Mg-Sn-Mn-Ca alloy in extruded condition as anode for Mg-air battery was investigated.HPE treatment exerts a prominent effect on the grain structure and orientation,distribution of the second phase particles as well as the dislocation density of the extruded alloy.The HPE alloy exhibits a distinctly high cell voltage together with specific energy compared with that of Non-HPE one.Intermittent discharge tests confirm that the HPE alloy possesses a more excellent discharge activity and more stable discharge process than the NonHPE one.All results demonstrate that the HPE alloy is an attractive anode material for Mg-air battery with long-term storage and under intermittent discharge.