INTERNAL FLOW IN CROSS-FLOW FAN FOR AIR CONDITIONER

A numerical analytic process is suggested combining direct boundary element methodwith discrete vortex method and internal flow in cross-flow fan calculated. The process considersnot only function of impeller, but also effect of volute casing. Internal flow field of cross-flow fan ispractically measured, and results compared with that from calculation. It shows that the process isexpected to be used in predicting performances of fluid machinery.

Middle or low water pressure direct spiral double helix converging nozzle structure optimization and flow field analysis

In order to solve the problem of using new nozzle is proposed in fire rescue robot. middle or low water pressure to form fine water mist, a Existing water mist nozzles are basically used for high pressure and in large size, complex structure and poor low pressure atomization effect in comparison with requirement of snake-like fire rescue robots. On the basis of comprehensive typical spray noz- zles, a direct spiral double helix converging nozzle （DSDHCN） is proposed, which has the advanta- ges of small volume, light weight, simple structure, and convenient installation. To make the spray nozzle have good performance, and meet the requirements of more efficient fire extinguishing, a nu- merical study is carried out to analyze the internal and external full flow field of nozzle. A gas-liquid two-phase flow is applied to simulate the external full flow field of nozzle with VOF model in fluent software. The simulation results show the real situation of water flow out of the atomization nozzle and the water jet trajectory. Some simulations about middle or low water pressure direct spiral double he- lix converging optimized nozzle have been done in 30bar pressure. The simulation results show that the optimized nozzle structure not only makes the spray droplets have a good cone angle, but also have a sufficient axial velocity,which proves the structure rationality of the proposed optimized nozzle.

Performance Prediction of an Optimized Centrifugal Pump with High Efficiency

The main structural parameters of the IR100-80-100A type chemical centrifugal pump have been optimized by means of an orthogonal test approach.The centrifugal pump has been modeled using the CFturbo software,and 16 sets of orthogonal-test schemes have been defined on the basis of 4 parameters,namely,the blade number,blade outlet angle,impeller outlet diameter,and impeller outlet width.Such analysis has been used to determine the influence of each index parameter on the pump working efficiency and identify a set of optimal combinations of such parameters.The internalflowfield in the centrifugal pump has been simulated by using the PumLinx software.These numerical results have shown that,compared with the prototype pump,the outlet pressure and shaft power of the optimized pump can be significantly reduced,and the pump working efficiency can be improved by 5.59%.In the present study,some arguments are also provided to demonstrate that,with respect to other optimization methods,the orthogonal test approach is more convenient,and requires less test times.

NUMERICAL SIMULATION OF FLOW FIELD INSIDE HYDRAULIC SPOOL VALVE

The finite element method of computational fluid dynamics was applied to simulate the internal flow field in hydraulic spool valve which is one of the most important components in hydraulic technique. The formation of the vortexes with time was investigated under two different flow conditions. Two kinds of flow descriptions including streamline patterns and velocity vector plots were given to show the flow field inside the spool valve clearly, which is of theoretical significance and of practical values to analyze energy loss and fluid noise in the valve and to optimize the intermal flow structure of the valve.