Adaptive Optimal Discrete-Time Output-Feedback Using an Internal Model Principle and Adaptive Dynamic Programming

In order to address the output feedback issue for linear discrete-time systems, this work suggests a brand-new adaptive dynamic programming(ADP) technique based on the internal model principle(IMP). The proposed method, termed as IMP-ADP, does not require complete state feedback-merely the measurement of input and output data. More specifically, based on the IMP, the output control problem can first be converted into a stabilization problem. We then design an observer to reproduce the full state of the system by measuring the inputs and outputs. Moreover, this technique includes both a policy iteration algorithm and a value iteration algorithm to determine the optimal feedback gain without using a dynamic system model. It is important that with this concept one does not need to solve the regulator equation. Finally, this control method was tested on an inverter system of grid-connected LCLs to demonstrate that the proposed method provides the desired performance in terms of both tracking and disturbance rejection.

Design of active disturbance rejection internal model control strategy for SISO system with time delay process

A novel control scheme of active disturbance rejection internal model control(ADRIMC) is proposed to improve the anti-interference ability and robustness for the dead-time process. The active anti-interference concept is introduced into the internal model control(IMC) by analyzing the relationship between IMC and disturbance observer control(DOB). Further, a design process of disturbance filter is presented to realize the active anti-interference ability for ADRIMC scheme. The disturbance filter is used to estimate an equivalent disturbance consisting of both external disturbances and internal disturbances caused by model mismatches.Simulation results demonstrate that the proposed method possesses a good disturbance rejection performance, though losing some partial dynamic performance. In other words, the proposed method shows a tradeoff between the dynamic performance and the system robust.

Modified Two-Degrees-of-Freedom Internal Model Control for Non-Square Systems with Multiple Time Delays

A modified two-degrees-of-freedom( M-TDOF) internal model control( IMC) method is proposed for non-square systems with multiple time delays and right-half-plane( RHP) zeros. In this method,pseudo-inverse is introduced to design the internal model controller,and a desired closed-loop transfer function is designed to eliminate the unrealizable factors of the derived controller. In addition,set-point tracking and load-disturbance rejection of each process are separately controlled by two controllers. The simulation results show that in addition to high decoupling performance and robustness,the proposed control method also effectively improves loaddisturbance rejection and simultaneously optimizes the input tracking performance and disturbance rejection performance by selecting the parameters of controllers. Furthermore,the higher tolerance of model mismatch is achieved in this paper.

Multi-loop Internal Model Controller Design Based on a Dynamic PLS Framework

In this paper,a multi-loop internal model control(IMC) scheme in conjunction with feed-forward strategy based on the dynamic partial least squares(DyPLS) framework is proposed.Unlike the traditional methods to decouple multi-input multi-output(MIMO) systems,the DyPLS framework automatically decomposes the MIMO process into a multi-loop system in the PLS subspace in the modeling stage.The dynamic filters with identical structure are used to build the dynamic PLS model,which retains the orthogonality among the latent variables.To address the model mismatch problem,an off-line least squares method is applied to obtain a set of optimal filter parameters in each latent space.Without losing the merits of model-based control,a simple and easy-tuned IMC structure is readily carried over to the dynamic PLS control framework.In addition,by projecting the measurable disturbance into the latent subspace,a multi-loop feed-forward control is yielded to achieve better performance for disturbance rejection.Simulation results of a distillation column are used to further demonstrate this new strategy outperforms conventional control schemes in servo behavior and disturbance rejection.

Vehicle Active Steering Control Research Based on Two-DOF Robust Internal Model Control

Because of vehicle＇s external disturbances and model uncertainties,robust control algorithms have obtained popularity in vehicle stability control.The robust control usually gives up performance in order to guarantee the robustness of the control algorithm,therefore an improved robust internal model control（IMC） algorithm blending model tracking and internal model control is put forward for active steering system in order to reach high performance of yaw rate tracking with certain robustness.The proposed algorithm inherits the good model tracking ability of the IMC control and guarantees robustness to model uncertainties.In order to separate the design process of model tracking from the robustness design process,the improved 2 degree of freedom（DOF） robust internal model controller structure is given from the standard Youla parameterization.Simulations of double lane change maneuver and those of crosswind disturbances are conducted for evaluating the robust control algorithm,on the basis of a nonlinear vehicle simulation model with a magic tyre model.Results show that the established 2-DOF robust IMC method has better model tracking ability and a guaranteed level of robustness and robust performance,which can enhance the vehicle stability and handling,regardless of variations of the vehicle model parameters and the external crosswind interferences.Contradiction between performance and robustness of active steering control algorithm is solved and higher control performance with certain robustness to model uncertainties is obtained.

Support vector regression-based internal model control

This paper proposes a design of internal model control systems for process with delay by using support vector regression(SVR).The proposed system fully uses the excellent nonlinear estimation performance of SVR with the structural risk minimization principle.Closed-system stability and steady error are analyzed for the existence of modeling errors.The simulations show that the proposed control systems have the better control performance than that by neural networks in the cases of the training samples with small size and noises.

Generalized Internal Model Robust Control for Active Front Steering Intervention

Because of the tire nonlinearity and vehicle＇s parameters＇uncertainties,robust control methods based on the worst cases,such as H_∞,μsynthesis,have been widely used in active front steering control,however,in order to guarantee the stability of active front steering system（AFS）controller,the robust control is at the cost of performance so that the robust controller is a little conservative and has low performance for AFS control.In this paper,a generalized internal model robust control（GIMC）that can overcome the contradiction between performance and stability is used in the AFS control.In GIMC,the Youla parameterization is used in an improved way.And GIMC controller includes two sections：a high performance controller designed for the nominal vehicle model and a robust controller compensating the vehicle parameters＇uncertainties and some external disturbances.Simulations of double lane change（DLC）maneuver and that of braking on split-μroad are conducted to compare the performance and stability of the GIMC control,the nominal performance PID controller and the H_∞controller.Simulation results show that the high nominal performance PID controller will be unstable under some extreme situations because of large vehicle＇s parameters variations,H_∞controller is conservative so that the performance is a little low,and only the GIMC controller overcomes the contradiction between performance and robustness,which can both ensure the stability of the AFS controller and guarantee the high performance of the AFS controller.Therefore,the GIMC method proposed for AFS can overcome some disadvantages of control methods used by current AFS system,that is,can solve the instability of PID or LQP control methods and the low performance of the standard H_∞controller.

Improvement of precision for pendulous integrating gyro accelerometer via adaptive internal model control

An adaptive internal mode control is proposed to eliminate effectively periodic disturbance with uncertain frequency caused by input error angle of PIGA （Pendulous Integrating Gyro Accelerometer）. An adaptive algorithm with periodic disturbance frequency identification on line is applied and the internal model controller parameters are adjusted to eliminate disturbance. Then the convergence of this algorithm and the stability of the system are proved by the averaging method. Simulation results verify the proposed scheme can eliminate periodic disturbance and improve the test precision for PIGA effectively.

Hybrid internal model control and proportional control of chaotic dynamical systems

A new chaos control method is proposed to take advantage of chaos or avoid it. The hybrid Internal Model Control and Proportional Control learning scheme are introduced. In order to gain the desired robust performance and ensure the system's stability, Adaptive Momentum Algorithms are also developed. Through properly designing the neural network plant model and neural network controller, the chaotic dynamical systems are controlled while the parameters of the BP neural network are modified. Taking the Lorenz chaotic system as example, the results show that chaotic dynamical systems can be stabilized at the desired orbits by this control strategy.

Temperature Control Based on Fuzzy Logic Two-degree-of-freedom Smith Internal Model

According to the characteristics of the large time delay,nonlinearity and the great inertia of temperature control system in biomass pyrolysis reactor,a two-degree-of-freedom Smith internal model controller based on fuzzy control is proposed.Firstly,the mathematical model of the temperature control system is established by using the step response method,and then the two-degree-of-freedom Smith internal model controller is designed,and the good tracking performance and disturbance suppression performance can be obtained by designing the set value tracking controller and interference rejection capability.Secondly,the fuzzy control algorithm is used to realize the on-line tuning of the control parameters of the two-degree-of-freedom Smith internal model algorithm.The simulation results show that,compared with the traditional internal model control,fuzzy internal model PID control and two-degree-of-freedom Smith internal model control,the algorithm proposed in this paper improves the influence of lag time on the control system,realizes the separation control of set point tracking and anti-jamming performance and the self-tuning of control parameters,and improves the control performance of the system.

Electrostatic Suspension System Nonlinear Character Analysis and Its Internal Model Control

Nonlinearity is an important characteristic in electrostatic suspension system (ESS). This paper concludes the nonlinear parts in ESS, which generally result from the relationships between rotor displacement and capacitance, rotor displacement and electrostatic force, and control voltage and electrostatic force. In terms of the nonlinearities, a new control method with modified internal model control (IMC) was proposed to analyze the ESS, deduce the transfer function of the modified IMC controller in ESS, and simulate this new application in ESS. Comparing with proportional integral derivative (PID) control, IMC has only a parameter, and has better performance. As a result, IMC solves nonlinearity error well in ESS with only one uncertain parameter, and performs well when the rotor has large displacement.

Synthetical Control of AGC/LPC System Based on Neural Networks Internal Model Control

One synthetical control method of AGC/LPC system based on intelligence control theory-neural networks internal model control method is presented. Genetic algorithm (GA) is applied to optimize the parameters of the neural networks. Simulation results prove that this method is effective.

An overview on the distributed internal model approach and its applications

The cooperative output regulation problem has been studied by two approaches:the distributed observer(DO)approach and the distributed internal model(DIM)approach,respectively.Each of these two approaches has its own merits and weaknesses.Recently,we presented an overview on the cooperative output regulation problem by the DO approach.This paper further surveys the cooperative output regulation problem by the DIM approach.We first summarize the constructions and the roles of two different versions of the internal models:the distributed p-copy internal model and the distributed canonical internal model.Then,we describe an integrated framework that combines the DO approach and the DIM approach.Extensions and variants of the DIM and their applications will also be highlighted.

Analysis and Optimization of Boost Converter Parameters in Internal Model Control for Voltage Source Converter-based AC Microgrids

This paper investigates integration of distributed energy resources(DERs)in microgrids(MGs)through two-stage power conversion structures consisting of DC-DC boost converter and DC-AC voltage source converter(VSC)subsystems.In contrast to existing investigations that treated DC-link voltage as an ideal constant voltage,this paper considers the non-ideal dynamic coupling between both subsystems for completeness and higher accuracy,which introduces additional DC-side dynamics to the VSC.The analysis shows parameters of the boost converter’s power model that impact stability through the DC-link.Carefully selecting these parameters can mitigate this effect on stability and improve dynamic performance across the DC-link.Hence,an optimization framework is developed to facilitate in selecting adequate boost converter parameters in designing a stable voltage source converter-based microgrid(VSC-MG).The developed optimization framework,based on particle swarm optimization,considers dynamic coupling between both subsystems and is also effective in avoiding inadequate boost converter parameters capable of propagating instability through the DC-link to the VSC.Simulations are performed with MATLAB/Simulink to validate theoretical analyses.

An internal ballistic model of electromagnetic railgun based on PFN coupled with multi-physical field and experimental validation

To accelerate the practicality of electromagnetic railguns,it is necessary to use a combination of threedimensional numerical simulation and experiments to study the mechanism of bore damage.In this paper,a three-dimensional numerical model of the augmented railgun with four parallel unconventional rails is introduced to simulate the internal ballistic process and realize the multi-physics field coupling calculation of the rail gun,and a test experiment of a medium-caliber electromagnetic launcher powered by pulse formation network(PFN)is carried out.Various test methods such as spectrometer,fiber grating and high-speed camera are used to test several parameters such as muzzle initial velocity,transient magnetic field strength and stress-strain of rail.Combining the simulation results and experimental data,the damage condition of the contact surface is analyzed.

Average Current Control with Internal Model Control and Real-time Frequency Decoupling for Hybrid Energy Storage Systems in Microgrids

Among hybrid energy storage systems(HESSs),battery-ultracapacitor systems in active topology use DC/DC power converters for their operations.HESSs are part of the solutions designed to improve the operation of power systems in different applications.In the residential microgrid applications,a multilevel control system is required to manage the available energy and interactions among the microgrid components.For this purpose,a rule-based power management system is designed,whose operation is validated in the simulation,and the performances of different controllers are compared to select the best strategy for the DC/DC converters.The average current control with internal model control and real-time frequency decoupling is proposed as the most suitable controller according to the contemplated performance parameters,allowing voltage regulation values close to 1%.The results are validated using real-time hardware-in-the-loop(HIL).These systems can be easily adjusted for other applications such as electric vehicles.

A modified structure internal model robust control method for the integration of active front steering and direct yaw moment control

Taking into account the nonlinearity of vehicle dynamics and the variations of vehicle parameters,the integrated control strategy for active front steering(AFS)and direct yaw control(DYC)that can maintain the performance and robustness is a key issue to be researched.Currently,the H∞method is widely applied to the integrated control of chassis dynamics,but it always sacrifices the performance in order to enhance the stability.The modified structure internal model robust control(MSIMC)obtained by modifying internal model control(IMC)structure is proposed for the integrated control of AFS and DYC to surmount the conflict between performance and robustness.Double lane change(DLC)simulation is developed to compare the performance and the stability of the MSIMC strategy,the PID controller based on the reference vehicle model and the H∞controller.Simulation results show that the PID controller may oscillate and go into instability in severe driving conditions because of large variations of tire parameters,the H∞controller sacrifices the performance in order to enhance the stability,and only the MSIMC controller can both ensure the robustness and the high performance of the integrated control of AFS and DYC.

A High-order Internal Model Based Iterative Learning Control Scheme for Discrete Linear Time-varying Systems

In this paper, an iterative learning control algorithm is proposed for discrete linear time-varying systems to track iterationvarying desired trajectories. A high-order internal model(HOIM) is utilized to describe the variation of desired trajectories in the iteration domain. In the sequel, the HOIM is incorporated into the design of learning gains. The learning convergence in the iteration axis can be guaranteed with rigorous proof. The simulation results with permanent magnet linear motors(PMLM) demonstrate that the proposed HOIM based approach yields good performance and achieves perfect tracking.

Multi-loop adaptive internal model control based on a dynamic partial least squares model

A multi-loop adaptive internal model control (IMC) strategy based on a dynamic partial least squares (PLS) frame-work is proposed to account for plant model errors caused by slow aging,drift in operational conditions,or environmental changes.Since PLS decomposition structure enables multi-loop controller design within latent spaces,a multivariable adaptive control scheme can be converted easily into several independent univariable control loops in the PLS space.In each latent subspace,once the model error exceeds a specific threshold,online adaptation rules are implemented separately to correct the plant model mismatch via a recursive least squares (RLS) algorithm.Because the IMC extracts the inverse of the minimum part of the internal model as its structure,the IMC controller is self-tuned by explicitly updating the parameters,which are parts of the internal model.Both parameter convergence and system stability are briefly analyzed,and proved to be effective.Finally,the proposed control scheme is tested and evaluated using a widely-used benchmark of a multi-input multi-output (MIMO) system with pure delay.

Global Disturbance Rejection of Switched Nonlinear Systems with Switched Internal Model

This paper investigates the problem of global disturbance rejection for a class of switched nonlinear systems where the solvability of the disturbance rejection problem for subsystems is not assumed. The disturbances are assumed to be sinusoidal with completely unknown frequencies, phases and amplitudes. First, as an extension of the classic concept of internal model for non-switched systems, a switched internal model is proposed. Second, in order to solve the problem under study, an adaptive control method is established on the basis of the multiple Lyapunov functions method. Also,adaptive state-feedback controllers of subsystems are designed and incorporated with a switching law to asymptotically reject the unknown disturbances. Finally, an example is provided to demonstrate the effectiveness of the proposed design method.