Improved Measurement Performance of Inorganic Elements in Coal by Laser-Induced Breakdown Spectroscopy Coupled with Internal Standardization

Laser-induced breakdown spectroscopy was employed to determine the inorganic elements in coal. To improve the measurement＇s accuracy and precision, a new internal standardization scheme, which we named changed internal standardization, was compared with the traditional internal standardization and no internal standardization for the analysis of inorganic elements. The new internal standardization scheme used the atomic line of carbon at 247.86 nm and the molecular band of CN at 388.34 nm and C2 at 516.32 nm to normalize the lines of inorganic elements that were distributed in the same spectral channel. The performance of the utilization of the new internal standardization scheme was evaluated using a set of coal samples, including twenty calibration samples and five validation samples. The results show that the coefficients of determination R2 and the slope of calibration models coupled with changed internal standard- ization are better than that of the calibration models coupled with fixed internal standardization and no internal standardization. Moreover, the measurement accuracy and reproducibility of changed internal standardization for the analysis of five validation samples also yielded further improvement. The results that we obtained suggest that changed internal standardization could compensate for the matrix effects, as well as the influence of the difference in the spectral response of the light collection system.

Quantitative Analysis of Fe Content in Iron Ore via External Calibration in Conjunction with Internal Standardization Method Coupled with LIBS

The external calibration in conjunction with internal standardization（ECIS） coupled with laser-induced breakdown spectroscopic（LIBS） technique was proposed to perform the quantitative analysis of Fe content in iron ore The plasma temperature and the electron number density were calculated to prove that the plasma was under local thermodynamic equilibrium（LTE） conditions and to ensure that the integral intensities of Fe I lines were reasonable. In addition, the result of the quantitative analysis shows a content of （20.26±0.59）% by mass of Fe in the iron ore. It was determined by four calibration curves, drawn for four emission lines of Fe I（373.48, 373.71,404.58 and 438.35 nm） normalized by Mn I line, base on the ECIS method which can eliminate the influence of matrix effect and improve the accuracy of quantitative analysis, compared with the standard addition method. Both the results of these two analytical methods were compared with that listed in the Standard Substance Certificate. The percentage content of Fe in the same sample of iron ore by the ECIS method was （20.17±0.08）% by mass, which shows a good performance to analyze the Fe content of iron ore in combination with LIBS.

Standard-sample bracketing calibration method combined with Mg as an internal standard for silicon isotopic compositions using multi-collector inductively coupled plasma mass spectrometry

Silicon isotope analysis traditionally uses a standard-sample bracketing （SSB） method that relies upon greater instrument stability than can be consistently expected. The following proposed method reduces the level of instrumental stability required for the analysis process and provides a valid solution for high-precision and accurate studies of Si isotopic compositions. Rock samples were dissolved by using alkali fusion and acidification. Silicon isotopes were purified with an ion exchange resin. Interfering peaks for isotopes were separated by using a Nu Plasma 1700 multi-collector inductively coupled plasma mass spectrometry （MS） system in high-resolution mode （M/AM 〉 8000 RP）. Two magnesium isotopes （25Mg and 26Mg） and three silicon isotopes （28Si, 29Si, and 3;Si） were analyzed in the same data collection cycle. Mg isotopes were used as an internal standard to calibrate the mass discrimination effects in MS analysis of Si isotopes in combination with the SSB method in order to reduce the effects of MS interference and instrumental mass dis- crimination on the accuracy of measurements. The conventional SSB method without the Mg internal standard and the proposed SSB method with Mg calibration delivered consistent results within two standard deviations. When Mg was used as an internal standard for calibration, the analysis precision was better than 0.05 %0 amu.

International Standardization of Blockchain and Distributed Ledger Technology:Overlaps,Gaps and Challenges

As one of the most concerned digital technologies in recent years,blockchain and distributed ledger technology are an important driving force for a new round of technological development.It is currently in the process of accelerating its evolution and maturity,and has gradually integrated with other digital technologies.It has been applied in many industries,providing decentralized solutions for various industries,realizing innovative storage models,and building a new trust system.As blockchain technology is officially incorporated into China’s new information infrastructure category,the application fields of blockchain have expanded rapidly,gradually extending from the financial field and government affairs to other fields in the real economy.At the same time,with the continuous development of the globalized economy,blockchain technology will also have a profound impact on international technological and economic development.Therefore,for the healthy and orderly development and real implementation of the blockchain industry,standardize the application of blockchain,effectively break through the cognitive and technical barriers between different countries,industries and systems on a global scale,prevent application risks,the development of the global blockchain industry needs standardization basis,which is particularly important and urgent.A sound standard system is an important key to the successful development of technology,and formulating the right standard at the right time for technology development helps ensure the ease of use and interoperability of the technology.From the perspective of international standardization,this article first introduces the general situation of ISO,ITU-T,IEEE,W3C and other international standardization organizations,and sorts out the status quo of the blockchain standardization working groups of mainstream international standardization organizations.All blockchain-related standards under development have been analyzed for the characteristics of international blockchain technology standards and industry application standards.Through data analysis,the overlaps,differences and conflicts in the field of international blockchain standard formulation are sorted out,and suggestions for blockchain standardization work in the application and development of blockchain technology standardization by international organizations and industries are put forward.The plans and layouts of future international standards are summarized to help the development of the international standardization of blockchain.

International Trade Needs Standardization in China

This article introduces the concepts of international trade procedures simplification and standardization, and illustrates implememt procedures and methods, furthermore, it puts forward proposals for training of international trade procedures simplification and standardization.

Determination of egg and milk allergen in food products by liquid chromatography-tandem mass spectrometry based on signature peptides and isotope-labeled internal standard

The aim of this work was to develop a liquid chromatography-tandem mass spectrometry method for the determination of milk allergen and egg allergen in food products.Signature peptides GGLEPINFQTAADQAR,VGINYWLAHK,VLVLDTDYK,FFVAPFPEVFGK,and NAVPITPTLNR were confirmed and synthesized as the quantitative peptide of ovalbumin,α-lactalbumin,β-lactoglobulin,α_(S1)-casein andα_(S2)-casein,the relative isotope-labeled internal standards were used in the quantitative analysis.Linear range was in the range of0.5-5000.0 nmol/L for egg and milk allergen in bread,cake,cookie,rice crust and wheat flour samples with free from egg and milk,the limits of detection of milk allergens and egg allergen were in the range between0.94 mg/100 g and 56.71 mg/100 g,limits of quantification of milk allergens and egg allergen were in the range between 2.36 mg/100 g and 141.78 mg/100 g.The recoveries ranged from 76.7%to 122.8%,the relative standard deviations were in the range of 1.60%-15.60%.The developed method has been successfully used for the detection of egg and milk allergen in various food samples.

Quantitative Determination of Tetrachlorantraniliprole by(1)^H NMR Spectroscopy with Internal Standard Method

[Objective]This study was to establish a rapid,specific and simple method for quantitative determination of tetrachlorantraniliprole by 1H NMR.[Method]1H NMR spectroscopy was acquired with deuterium DMSO as the solvent and maleic acid as internal standard under the conditions of temperature 25℃,pulses width 8.0μs,delay time 5 s,and scanning times 8.[Result]The hydrogen proton peaks of tetrachlorantraniliprole(δ=10.55)and maleic acid(δ=6.27)were taken as quantitative peaks.The peak area ratio y(As/Ar)and mass ratio x(ms/mr)were linearly regressed,and the correlation coefficient was 0.9999.The RSD value of repeatability test was 0.38%,and the RSD value of stability test was 0.77%.The content of tetrachlorantraniliprole was determined as 99.6%.[Conclusion]1H NMR spectroscopy can be used for quantitative determination of tetrachlorantraniliprole without standard reference,which is rapid,accurate and simple.

China and IEC international standardization activities

International Electrotechnical Commission (IEC), one of the currently worlswide largest and most authoritative international standardization organizations,is specialized in developing and promulgating international standards for the electric and electronic fields, which are widespread adopted through out the world and play an important role in the international trade of electric and electronic products. Moreover, according to the 2005 statistics by the World Bank, the population of countries participating in the IEC activities accounts for 92% of the world total and their trade volume accounts for 95% of the global total. ……

Analysis of monopoly risks in international standardization activities from the perspective of market competition and relevant suggestions

With the development of International SDOs,the relationship between standardization activities and market competition has become closer and more complex.Some International SDOs may restrict enterprises from participating in relevant standardization activities without justifiable reasons,which is contrary to the international consensus on the principles of openness,fairness and transparency in standardization,in which there is a risk of monopoly that excludes and restricts competition.Enterprises can consider defending their legitimate rights and interests through anti-monopoly litigation.A sustainable international standardization ecological environment should be actively created to fundamentally reduce the above-mentioned risks.

Review and Outlook of China Electronic and IT Industry Footprints in IEC International Standardization Activities

Year 2006 is the year marking the 100th anniversary of the founding of International Electrotechnical Commission (IEC). IEC is mainly engaged in the international standardization for electrical and electronic technology field aiming at promoting international trade and technology cooperation and exchange, improving product and service quality, upgrading productivity and protecting the environment as well as human health and safety. Most countries worldwide adopt standards developed and promulgated by IEC, providing a platform to international trade and technical exchange. China has being a member since 1957. Electronic and IT are the most developed and energetic filed in recent decades. Number of IEC TC/SC specialized in electronic and IT amounts up to 52.……

Great Achievements in RF Connector International Standardization

This text introduces the great achievements made in recent years in the international standardization of the radio frequency （RF）connector. It analyses why the standards should be prepared and the benefits of standardization on our RF connector industry.

The Achievements of Participating International Standardization Activities Made by Chinese Electrotechnical Industry

Chinese electrotechnical industry includes power generation equipment, power transmission and distribution equipment, multi-purpose equipment, and basic electrical material. The industry has 46 national technical committees (TC) and sub-committees (SC), which mirrors to 70 TCs and SCs of International Electrotechnical Commission (IEC). During the past five years, leaded by Standardization Administration of China (SAC),China Electrical Equipment Industry Association (CEEIA) obtained many great achievements in promoting participation of international standardization activities by improving unified management and concentrating industrial strength:……

On Improving the Internal Control System of Enterprises

As a self-adjusted and self-constrained inherent mechanism, the Internal Control plays a extremely important role in the operation and management of enterprise. It＇s setting-up and putting into practice concerns the success or failure of the business directly. The author proposes some views from government, social intermediary organizes and enterprise three respects to improve Internal Control of the enterprise.

International exchanges on electrostatic protection and standardization

The 6th Electrostatic Protection and Standardization International Conference was held on November 10,2017 in Guizhou Normal University on the themes of＂promoting the discipline construction of electrostatic protection engineering and accelerating the development of electrostatic protection technology and industry＂.Experts and representatives held in-depth discussions on theoretical study,

Characteristics of laser-induced breakdown spectroscopy of liquid slag

Rapid online analysis of liquid slag is essential for optimizing the quality and energy efficiency of steel production. To investigate the key factors that affect the online measurement of refined slag using laser-induced breakdown spectroscopy(LIBS), this study examined the effects of slag composition and temperature on the intensity and stability of the LIBS spectra. The experimental temperature was controlled at three levels: 1350℃, 1400℃, and 1450℃. The results showed that slag composition and temperature significantly affected the intensity and stability of the LIBS spectra. Increasing the Fe content and temperature in the slag reduces its viscosity, resulting in an enhanced intensity and stability of the LIBS spectra. Additionally, 42 refined slag samples were quantitatively analyzed for Fe, Si, Ca, Mg, Al, and Mn at 1350℃, 1400℃, and 1450℃.The normalized full spectrum combined with partial least squares(PLS) quantification modeling was used, using the Ca Ⅱ 317.91 nm spectral line as an internal standard. The results show that using the internal standard normalization method can significantly reduce the influence of spectral fluctuations. Meanwhile, a temperature of 1450℃ has been found to yield superior results compared to both 1350℃ and 1400℃, and it is advantageous to conduct a quantitative analysis of the slag when it is in a “water-like” state with low viscosity.

Performance and Safety Improvement of Induction Motors based on Testing and Evaluation Standards

The induction motor,which converts electrical energy into mechanical energy,has been recognized as the cornerstone of industrialization.The rotor of an induction motor can be either a squirrel cage rotor or a wound-type rotor,both existing as magnetless topologies.Three-phase squirrel cage induction motors are frequently utilized in industrial drives because they are dependable,have high starting torque,are selfstarting and affordable.Single-phase induction motors,on the other hand,are commonly used for small loads such as domestic appliances in form of modest fans,pumps and electric power tools.In South Africa,there have been reports of fires and explosions resulting in live and property loss because of induction motors that have not been thoroughly tested or are incorrectly labelled in terms of ratings,electrical safety and performance.The goal of this study is targeted at preventing end-user injuries and failures caused by non-compliant induction motors,by evaluating locally manufactured/imported induction motors based on tests and evaluation from standards(IEC and SANS).The study is conducted using experimental procedures at the Explosion Prevention Technology and Rotating Machines(EPT and RM)laboratory,South African Bureau of Standards(SABS),South Africa.The main finding from the study shows differences in the nameplate characteristics of various induction motors which could have detrimental effects such as production and operational downtime in their end-use industries,at later stages.

Sex Pheromone Components of the Female Black Cutworm Moth in China: Identification and Field Trials

The sex pheromone blend of a China strain of the black cutworm moth Agrotis ypsilon （Rottemberg） （Lepidoptera： Noctuidae） was investigated. Chemical analysis of pheromone gland extracts of 3-day-old females showed that individual isolated glands contained only very small amounts of pheromone. The high-resolution gas chromatography combined with mass spectrometry （GC-MS） analysis showed the presence of Cis-7-dodecenyl acetate （Z7-12：Ac, A）, Cis-9-tetradecenyl acetate （Z9-14：Ac, B）, Cis- 11-hexadecenyl acetate （Z 11 - 16 ：Ac, C）, Cis-8-dodecenyl acetate （Z8-12：Ac, E） and Cis-5-decenyl acetate （Z5-10：Ac, D） in biologically active pheromone gland extracts. An extract of one gland from a day 3 female gave the following values for the gland components： 0.245±0.098ng for Z7-12：Ac, 0.080±0.031ng for Z9-14：Ac, 0.089±0.033ng for Z11-16：Ac, 0.085±0.031ng for Z5-10：Ac, 0.105±0.065ng for Z8-12：Ac per female. The percentages of Z7-12：Ac, Z9-14：Ac, Z11-16：Ac, Z5-10：Ac and ZS-12：Ac in pheromone gland extracts from individual females were （meaniSE） 40.451±13.66, 13.176±5.279, 14.943±5.142, 14.392±6.10 and 17.225±9.792 respectively, and the percentages of Z7-12：Ac, Z9-14：Ac and Z11-16：Ac were 58.75±9.429, 18.91±7.539 and 22.34±7.209. Field trials indicated that each single component of sex pheromone was non-effective and captured no males. The lures baited with duality compound of AB （3 ： 1） had a certain attraction to males, the mean captured number was 2.6. The attraction ability of the lures baited with ternary compound of ABC （3 ： 1 ：1） to males added significantly, the mean captured number per trap was 7.40, which was 2.8 times of duality compound of AB （3 ： 1）. The contents of sex pheromone could obviously affect its capture ability to males, the mean captured number was the highest at the dosage of 200 μg.

Latest research advances on magnesium and magnesium alloys worldwide

In the past two years,significant progresses have been achieved in high-performance cast and wrought magnesium and magnesium alloys,magnesium-based composites,advanced cast technologies,advanced processing technologies,and functional magnesium materials,such as Mg ion batteries,hydrogen storage Mg materials,bio-magnesium alloys,etc.Great contributions to the development of new magnesium alloys and their processing technologies have been made by Chongqing University,Shanghai Jiaotong University,Chinese Academy of Sciences,Helmholtz Zentrum Geesthacht,Queensland University,Brunel University,etc.This review paper is aimed to summarize the latest important advances in cast magnesium alloys,wrought magnesium alloys and functional magnesium materials worldwide in 2018–2019,including both the development of new materials and the innovation of their processing technologies.Based on the issues and challenges identified here,some future research directions are suggested,including further development of high-performance magnesium alloys having high strength and superior plasticity together with high corrosion resistance and low cost,and fundamental research on the phase diagram,diffusion,precipitation,etc.,as well as the development of advanced welding and joining technology.