期刊文献+
共找到3篇文章
< 1 >
每页显示 20 50 100
Control strategy of shortcut nitrification 被引量:3
1
作者 QAISAR Mahmood 《Journal of Environmental Sciences》 SCIE EI CAS CSCD 2006年第1期58-61,共4页
Shortcut nitrification for ammonium-rich wastewater is energy-saving and cost-effective procedure that has become one of the hotspots in the field of biological denitrogenation. An orthogonal experiment was performed ... Shortcut nitrification for ammonium-rich wastewater is energy-saving and cost-effective procedure that has become one of the hotspots in the field of biological denitrogenation. An orthogonal experiment was performed to study the combined effects of operational parameters on the performance of internal-loop airlift bioreactor for shortcut nitrification. The optimum operational parameters for the shortcut nitrification were fotmd as temperature 35 ℃, pH 8.0, dissolved oxygen concentration 1.0 mg/L, ammonium concentration 4 mmol/L and HRT 16 h, which have different influence on the performance of shortcut nitrification reactor. The pH, temperature and dissolved oxygen concentration have significant bearing on the process. The results showed that the shortcut nitrification reactor could be successfully started up within 42 d, and the reactor performance is steady with minimum NO2-/NOx- of 85.2%, maximum 93.4% and average value of 91.4% in effluent. Based on the analysis of experimental data, a new control strategy named “priority + combination” for shortcut nitrification was suggested. Through this strategy, the startup and operation of shortcut nitrification for ammonium-rich sludge digester liquids were optimized. The control strategy works well to keep the reactor operation in steady state and in achieving high-efficiency for shortcut nitrification. 展开更多
关键词 internal-loop airlift bioreactor shortcut nitrification orthogonal experiment control strategy sludge digester liquids
下载PDF
改进型气升式内环流硝化反应器氧传递特性的研究 被引量:14
2
作者 金仁村 郑平 +1 位作者 王向东 谢嘉 《高校化学工程学报》 EI CAS CSCD 北大核心 2006年第1期40-45,共6页
在废水处理领域,气升式内环流硝化反应器有着较好的应用前景;但其氧传递性能有待进一步改善。通过调整导流简直径以及导流简内静态混合元件的个数,试验了反应器结构对氧传递特性的影响。研究发现,当导流简直径取5.5cm,并在导流简... 在废水处理领域,气升式内环流硝化反应器有着较好的应用前景;但其氧传递性能有待进一步改善。通过调整导流简直径以及导流简内静态混合元件的个数,试验了反应器结构对氧传递特性的影响。研究发现,当导流简直径取5.5cm,并在导流简内安装13个静态混合元件时,这种改进型硝化反应器的氧传递能力显著提高。在表观气速为5.05~23.80cm·s^-1。的条件下,测得氧传递系数为0.151~0.778min^-1,充氧能力为7.84~42.80g O2·h^-1,容积供氧能力为2.00-10.93kg O2·m^-3·d^-1,氧转移效率为39.2%~48.1%,氧转移动力效率为3.2~4.0kg O2·(kW·h)^-1,相对于普通气升式内环流硝化反应器,改进型内环流硝化反应器的氧传递系数、充氧能力、氧转移效率和氧转移动力效率都提高72.5%。根据Higbie渗透模型和Kolmogoroff各向同性理论,建立了氧传递系数与相关参数的关联式,预测值与试验结果相吻合,两者的相对误差为9.15%。 展开更多
关键词 气升式内环流硝化反应器 氧传递系数 氧转移效率 静态混合器
下载PDF
改进型气升式硝化反应器剪切特性的研究
3
作者 金仁村 郑平 《环境科学》 EI CAS CSCD 北大核心 2006年第6期1088-1093,共6页
研究了气升式硝化反应器的剪切特性及其影响因素.结果表明,该反应器的剪切率呈现一定的空间分布.当进气流量为430~2700L·h^-1时,反应器总体剪切率为(0.702~3.13)×10^5s^-1,升流区剪切率为(1.07~31.3)×10... 研究了气升式硝化反应器的剪切特性及其影响因素.结果表明,该反应器的剪切率呈现一定的空间分布.当进气流量为430~2700L·h^-1时,反应器总体剪切率为(0.702~3.13)×10^5s^-1,升流区剪切率为(1.07~31.3)×10^5s^-1,气液分离区剪切率为(1.12~25.0)×10^5s^-1,最大剪切率出现在升流区.操作条件和反应器结构对该反应器的剪切率均有重大影响.当进气流量控制在1300~2700L·h^-1时,升流区和气液分离区的剪切率先降低后升高.剪切率与导流筒直径呈负相关,导流筒直径从4.0cm增大到5.5cm,升流区、气液分离区及总体剪切率分别降低85.5%、82.3%、80.6%.而与混合元件数成正相关,当导流筒直径为4.0cm时,较之普通反应器,改进型反应器升流区剪切率增大6.14(N=10)和7.97(N=39)倍,气液分离区剪切率增大7.18(N=10)和9.14(N=39)倍,总体剪切率增大6.35(N=10)和8.44(N=39)倍.该反应器的局部最大剪切率与总体剪切率之比(β)为3.68~7.66,采用较大的导流筒尺寸和适宜的静态混合元件数可促进剪切率的均匀分布. 展开更多
关键词 气升式硝化反应器 剪切率 静态混合器
下载PDF
上一页 1 下一页 到第
使用帮助 返回顶部