Approximate solution of Volterra-Fredholm integral equations using generalized barycentric rational interpolant

It is well-known that interpolation by rational functions results in a more accurate approximation than the polynomials interpolation.However,classical rational interpolation has some deficiencies such as uncontrollable poles and low convergence order.In contrast with the classical rational interpolants,the generalized barycentric rational interpolants which depend linearly on the interpolated values,yield infinite smooth approximation with no poles in real numbers.In this paper,a numerical collocation approach,based on the generalized barycentric rational interpolation and Gaussian quadrature formula,was introduced to approximate the solution of Volterra-Fredholm integral equations.Three types of points in the solution domain are used as interpolation nodes.The obtained numerical results confirm that the barycentric rational interpolants are efficient tools for solving Volterra-Fredholm integral equations.Moreover,integral equations with Runge’s function as an exact solution,no oscillation occurrs in the obtained approximate solutions so that the Runge’s phenomenon is avoided.

BIVARIATE BLENDING RATIONAL INTERPOLANTS

Both the Newton interpolating polynomials and the Thiele-type interpolating continued fractions based on inverse differences are used to construct a kind of bivariate blending rational interpolants and an error estimation is given.

New Approach to Bivariate Blending Rational Interpolants

牛顿的多项式插值可以是喜爱的线性插值，联系继续的部分插值是一种新类型非线性的插值。我们使用那些二插值构造混合合理 interpolants.Characteristic 的 bivariate 的一种新类型定理被讨论。我们给一些新相配插值公式。

Planar Cubic G^1 Hermite Interpolant with Minimal Quadratic Oscillation in Average

In this paper we apply a new method to choose suitable free parameters of the planar cubic G1 Hermite interpolant. The method provides the cubic G1 Hermite interpolant with minimal quadratic oscillation in average. We can use the method to construct the optimal shape-preserving interpolant. Some numerical examples are presented to illustrate the effectiveness of the method.

BIVARIATE VECTOR VALUED RATIONAL INTERPOLANTS BY BRANCHED CONTINUED FRACTIONS

By making use of Thiele-type bivariate branched continued fractions and Sumelson inverse,we construct a few kinds of bivariate vector valued rational interpolonts (BVRIs) over rectangular grids and find out certain relations among these BVRIs such as boundary identity and duality.

ALGORITHMS FOR LACUNARY VECTOR VALUED RATIONAL INTERPOLANTS

Efficient algorithms are established for the computation of bivariate lacunary vector valued rational interpolants based on the branched continued fractions and a numerical example is given to show how the algorithms are implemented,

Note on Rational Interpolants

In this note we present a constructive proof of symmetrical determinantal formulas forthe numerator and denominator of an ordinary rational interpolant,consider the confluencecase and give new determinantal formulas of the rational interpolant by means of Lagrange’sbasis functions.

Novel Investigation of Stochastic Fractional Differential Equations Measles Model via the White Noise and Global Derivative Operator Depending on Mittag-Leffler Kernel

Because of the features involved with their varied kernels,differential operators relying on convolution formulations have been acknowledged as effective mathematical resources for modeling real-world issues.In this paper,we constructed a stochastic fractional framework of measles spreading mechanisms with dual medication immunization considering the exponential decay and Mittag-Leffler kernels.In this approach,the overall population was separated into five cohorts.Furthermore,the descriptive behavior of the system was investigated,including prerequisites for the positivity of solutions,invariant domain of the solution,presence and stability of equilibrium points,and sensitivity analysis.We included a stochastic element in every cohort and employed linear growth and Lipschitz criteria to show the existence and uniqueness of solutions.Several numerical simulations for various fractional orders and randomization intensities are illustrated.

ALGEBRAIC-GEOMETRY FOUNDATION FOR CONSTRUCTING SMOOTH INTERPOLANTS ON CURVED SIDES ELEMENT

The aim of this paper is to lay a algebraic geometry foundation for constructing smoothing interpolants on curved side element. Some interpolation theorems in polynomial space are given. The main results effectively for CAGD are presented.

Suitable region of dynamic optimal interpolation for efficiently altimetry sea surface height mapping

The dynamic optimal interpolation(DOI)method is a technique based on quasi-geostrophic dynamics for merging multi-satellite altimeter along-track observations to generate gridded absolute dynamic topography(ADT).Compared with the linear optimal interpolation(LOI)method,the DOI method can improve the accuracy of gridded ADT locally but with low computational efficiency.Consequently,considering both computational efficiency and accuracy,the DOI method is more suitable to be used only for regional applications.In this study,we propose to evaluate the suitable region for applying the DOI method based on the correlation between the absolute value of the Jacobian operator of the geostrophic stream function and the improvement achieved by the DOI method.After verifying the LOI and DOI methods,the suitable region was investigated in three typical areas:the Gulf Stream(25°N-50°N,55°W-80°W),the Japanese Kuroshio(25°N-45°N,135°E-155°E),and the South China Sea(5°N-25°N,100°E-125°E).We propose to use the DOI method only in regions outside the equatorial region and where the absolute value of the Jacobian operator of the geostrophic stream function is higher than1×10^(-11).

Integer multiple quantum image scaling based on NEQR and bicubic interpolation

As a branch of quantum image processing,quantum image scaling has been widely studied.However,most of the existing quantum image scaling algorithms are based on nearest-neighbor interpolation and bilinear interpolation,the quantum version of bicubic interpolation has not yet been studied.In this work,we present the first quantum image scaling scheme for bicubic interpolation based on the novel enhanced quantum representation(NEQR).Our scheme can realize synchronous enlargement and reduction of the image with the size of 2^(n)×2^(n) by integral multiple.Firstly,the image is represented by NEQR and the original image coordinates are obtained through multiple CNOT modules.Then,16 neighborhood pixels are obtained by quantum operation circuits,and the corresponding weights of these pixels are calculated by quantum arithmetic modules.Finally,a quantum matrix operation,instead of a classical convolution operation,is used to realize the sum of convolution of these pixels.Through simulation experiments and complexity analysis,we demonstrate that our scheme achieves exponential speedup over the classical bicubic interpolation algorithm,and has better effect than the quantum version of bilinear interpolation.

Mesh-Free Interpolant Observables for Continuous Data Assimilation

This paper is dedicated to the expansion of the framework of general interpolant observables introduced by Azouani,Olson,and Titi for continuous data assimilation of nonlinear partial differential equations.The main feature of this expanded framework is its mesh-free aspect,which allows the observational data itself to dictate the subdivision of the domain via partition of unity in the spirit of the so-called Partition of Unity Method by Babuska and Melenk.As an application of this framework,we consider a nudging-based scheme for data assimilation applied to the context of the two-dimensional Navier-Stokes equations as a paradigmatic example and establish convergence to the reference solution in all higher-order Sobolev topologies in a periodic,mean-free setting.The convergence analysis also makes use of absorbing ball bounds in higherorder Sobolev norms,for which explicit bounds appear to be available in the literature only up to H^(2);such bounds are additionally proved for all integer levels of Sobolev regularity above H^(2).

Research on Interpolation Method for Missing Electricity Consumption Data

Missing value is one of the main factors that cause dirty data.Without high-quality data,there will be no reliable analysis results and precise decision-making.Therefore,the data warehouse needs to integrate high-quality data consistently.In the power system,the electricity consumption data of some large users cannot be normally collected resulting in missing data,which affects the calculation of power supply and eventually leads to a large error in the daily power line loss rate.For the problem of missing electricity consumption data,this study proposes a group method of data handling(GMDH)based data interpolation method in distribution power networks and applies it in the analysis of actually collected electricity data.First,the dependent and independent variables are defined from the original data,and the upper and lower limits of missing values are determined according to prior knowledge or existing data information.All missing data are randomly interpolated within the upper and lower limits.Then,the GMDH network is established to obtain the optimal complexity model,which is used to predict the missing data to replace the last imputed electricity consumption data.At last,this process is implemented iteratively until the missing values do not change.Under a relatively small noise level(α=0.25),the proposed approach achieves a maximum error of no more than 0.605%.Experimental findings demonstrate the efficacy and feasibility of the proposed approach,which realizes the transformation from incomplete data to complete data.Also,this proposed data interpolation approach provides a strong basis for the electricity theft diagnosis and metering fault analysis of electricity enterprises.

Design of a novel hybrid quantum deep neural network in INEQR images classification

We redesign the parameterized quantum circuit in the quantum deep neural network, construct a three-layer structure as the hidden layer, and then use classical optimization algorithms to train the parameterized quantum circuit, thereby propose a novel hybrid quantum deep neural network(HQDNN) used for image classification. After bilinear interpolation reduces the original image to a suitable size, an improved novel enhanced quantum representation(INEQR) is used to encode it into quantum states as the input of the HQDNN. Multi-layer parameterized quantum circuits are used as the main structure to implement feature extraction and classification. The output results of parameterized quantum circuits are converted into classical data through quantum measurements and then optimized on a classical computer. To verify the performance of the HQDNN, we conduct binary classification and three classification experiments on the MNIST(Modified National Institute of Standards and Technology) data set. In the first binary classification, the accuracy of 0 and 4 exceeds98%. Then we compare the performance of three classification with other algorithms, the results on two datasets show that the classification accuracy is higher than that of quantum deep neural network and general quantum convolutional neural network.

An Efficient Reliability-Based Optimization Method Utilizing High-Dimensional Model Representation and Weight-Point Estimation Method

The objective of reliability-based design optimization(RBDO)is to minimize the optimization objective while satisfying the corresponding reliability requirements.However,the nested loop characteristic reduces the efficiency of RBDO algorithm,which hinders their application to high-dimensional engineering problems.To address these issues,this paper proposes an efficient decoupled RBDO method combining high dimensional model representation(HDMR)and the weight-point estimation method(WPEM).First,we decouple the RBDO model using HDMR and WPEM.Second,Lagrange interpolation is used to approximate a univariate function.Finally,based on the results of the first two steps,the original nested loop reliability optimization model is completely transformed into a deterministic design optimization model that can be solved by a series of mature constrained optimization methods without any additional calculations.Two numerical examples of a planar 10-bar structure and an aviation hydraulic piping system with 28 design variables are analyzed to illustrate the performance and practicability of the proposed method.

Wavelet Multi-Resolution Interpolation Galerkin Method for Linear Singularly Perturbed Boundary Value Problems

In this study,a wavelet multi-resolution interpolation Galerkin method(WMIGM)is proposed to solve linear singularly perturbed boundary value problems.Unlike conventional wavelet schemes,the proposed algorithm can be readily extended to special node generation techniques,such as the Shishkin node.Such a wavelet method allows a high degree of local refinement of the nodal distribution to efficiently capture localized steep gradients.All the shape functions possess the Kronecker delta property,making the imposition of boundary conditions as easy as that in the finite element method.Four numerical examples are studied to demonstrate the validity and accuracy of the proposedwavelet method.The results showthat the use ofmodified Shishkin nodes can significantly reduce numerical oscillation near the boundary layer.Compared with many other methods,the proposed method possesses satisfactory accuracy and efficiency.The theoretical and numerical results demonstrate that the order of theε-uniform convergence of this wavelet method can reach 5.

Spatio-temporal variability of surface chlorophyll a in the Yellow Sea and the East China Sea based on reconstructions of satellite data of 2001-2020

Chlorophyll-a(Chl-a)concentration is a primary indicator for marine environmental monitoring.The spatio-temporal variations of sea surface Chl-a concentration in the Yellow Sea(YS)and the East China Sea(ECS)in 2001-2020 were investigated by reconstructing the MODIS Level 3 products with the data interpolation empirical orthogonal function(DINEOF)method.The reconstructed results by interpolating the combined MODIS daily+8-day datasets were found better than those merely by interpolating daily or 8-day data.Chl-a concentration in the YS and the ECS reached its maximum in spring,with blooms occurring,decreased in summer and autumn,and increased in late autumn and early winter.By performing empirical orthogonal function(EOF)decomposition of the reconstructed data fields and correlation analysis with several potential environmental factors,we found that the sea surface temperature(SST)plays a significant role in the seasonal variation of Chl a,especially during spring and summer.The increase of SST in spring and the upper-layer nutrients mixed up during the last winter might favor the occurrence of spring blooms.The high sea surface temperature(SST)throughout the summer would strengthen the vertical stratification and prevent nutrients supply from deep water,resulting in low surface Chl-a concentrations.The sea surface Chl-a concentration in the YS was found decreased significantly from 2012 to 2020,which was possibly related to the Pacific Decadal Oscillation(PDO).

A Cautionary Note on the Application of GIS in Spatial Optimization Modeling

Spatial optimization as part of spatial modeling has been facilitated significantly by integration with GIS techniques. However, for certain research topics, applying standard GIS techniques may create problems which require attention. This paper serves as a cautionary note to demonstrate two problems associated with applying GIS in spatial optimization, using a capacitated p-median facility location optimization problem as an example. The first problem involves errors in interpolating spatial variations of travel costs from using kriging, a common set of techniques for raster files. The second problem is inaccuracy in routing performed on a graph directly created from polyline shapefiles, a common vector file type. While revealing these problems, the paper also suggests remedies. Specifically, interpolation errors can be eliminated by using agent-based spatial modeling while the inaccuracy in routing can be improved through altering the graph topology by splitting the long edges of the shapefile. These issues suggest the need for caution in applying GIS in spatial optimization study.

A SUPERONVERGENCE ANALYISIS FOR FINITE ELEMENT SOLUTION BY THE INTERPOLANT POSTPROCESSING ON IRREGULAR MESHES FOR SMOOTH PROBLEM

The post-processing procedure is given by a interpolant postprocessing of the finit element solution by appropriately-define finite dimensional subspaces, The corresponding superconvergence are established on general quasi-regular finite element partitions.

ON THE GENERALIZED INVERSE NEVILLE-TYPE MATRIX-VALUED RATIONAL INTERPOLANTS

A new kind of matrix-valued rational interpolants is recursively established by means of generalized Samelson inverse for matrices, with scalar numerator and matrix-valued denominator. In this respect, it is essentially different from that of the previous works [7, 9], where the matrix-valued rational interpolants is in Thiele-type continued fraction form with matrix-valued numerator and scalar denominator. For both univariate and bivariate cases, sufficient conditions for existence, characterisation and uniqueness in some sense are proved respectively, and an error formula for the univariate interpolating function is also given. The results obtained in this paper are illustrated with some numerical examples.