Background: Vaccinations for animals are crucial for food production, animal welfare, public health, and animal health. They are an affordable way to stop animal sickness, increase food production efficiency, and less...Background: Vaccinations for animals are crucial for food production, animal welfare, public health, and animal health. They are an affordable way to stop animal sickness, increase food production efficiency, and lessen or stop the spread of zoonotic diseases to humans. Animal vaccines that are both safe and efficacious are vital to modern culture. The vaccine should induce a strong, protective and prolonged immune response against the antigenic factor. In order to achieve these goals, novel vaccination techniques and an efficient adjuvant are required to render the vaccine immunogenically protective and trigger a strong immune response. Aim: Our study aims to promote and enhance the immunogenicity against RVF virus disease through lyophilized inactivated RVF vaccine through induction of early cellular, high and prolonged humeral immunity in vaccinated animals using cabopol as stabilizer and Saponin or normal saline as a diluent at time of vaccination. Moreover, manufacturing of these vaccines is easy to be done. Results: The gained results revealed that RVF freeze-dried vaccine with Carbopol that reconstituted using Saponin elicited better immune response than that reconstituted using normal saline (NaCl). The cell mediated immune response as represented by lymphocyte blastogenesis and phagocytic activity were markedly increased with high levels when we used Saponin as a diluent than that in group vaccinated with vaccine diluted with NaCl, on the other side the humeral immune response in group vaccinated using the Saponin as diluent is more detected and stayed within the protective level till the end of 11<sup>th</sup> month post vaccination (1.5 TCID<sub>50</sub>) while the immune response induced after using normal saline as a diluent stayed within the protective level till the end of 10<sup>th</sup> month post vaccination (1.8 TCID<sub>50</sub>). Conclusion: The use of Saponin as a diluent for reconstitution of the freeze dried RVF vaccine is preferable than the use of normal saline enhancing both sheep cellular and humeral immune response.展开更多
Based on the study of the distribution of intra-platform shoals and the characteristics of dolomite reservoirs in the Middle Permian Qixia Formation in the Gaoshiti–Moxi area of the Sichuan Basin,SW China,the control...Based on the study of the distribution of intra-platform shoals and the characteristics of dolomite reservoirs in the Middle Permian Qixia Formation in the Gaoshiti–Moxi area of the Sichuan Basin,SW China,the controlling factors of reservoir development were analyzed,and the formation model of“intra-platform shoal thin-layer dolomite reservoir”was established.The Qixia Formation is a regressive cycle from bottom to top,in which the first member(Qi1 Member)develops low-energy open sea microfacies,and the second member(Qi2 Member)evolves into intra-platform shoal and inter-shoal sea with decreases in sea level.The intra-platform shoal is mainly distributed near the top of two secondary shallowing cycles of the Qi2 Member.The most important reservoir rock of the Qixia Formation is thin-layer fractured-vuggy dolomite,followed by vuggy dolomite.The semi-filled saddle dolomite is common in fracture-vug,and intercrystalline pores and residual dissolution pores combined with fractures to form the effective pore-fracture network.Based on the coupling analysis of sedimentary and diagenesis characteristics,the reservoir formation model of“pre-depositional micro-paleogeomorphology controlling shoal,sedimentary shoal controlling dolomite,penecontemporaneous dolomite benefiting preservation of pores,and late hydrothermal action effectively improving reservoir quality”was systematically established.The“first-order high zone”micro-paleogeomorphology before the deposition of the Qixia Formation controlled the development of large area of intra-platform shoals in Gaoshiti area during the deposition of the Qi2 Member.Shoal facies is the basic condition of early dolomitization,and the distribution range of intra-platform shoal and dolomite reservoir is highly consistent.The grain limestone of shoal facies is transformed by two stages of dolomitization.The penecontemporaneous dolomitization is conducive to the preservation of primary pores and secondary dissolved pores.The burial hydrothermal fluid enters the early dolomite body along the fractures associated with the Emeishan basalt event,makes it recrystallized into medium–coarse crystal dolomite.With the intercrystalline pores and the residual vugs after the hydrothermal dissolution along the fractures,the high-quality intra-platform shoal-type thin-layer dolomite reservoirs are formed.The establishment of this reservoir formation model can provide important theoretical support for the sustainable development of Permian gas reservoirs in the Sichuan Basin.展开更多
The Mesoproterozoic rifts are developed in the Ordos Basin located in the western margin of the North China Plate.Based on the latest 3D seismic data and previous research results,this study intends to discuss the zon...The Mesoproterozoic rifts are developed in the Ordos Basin located in the western margin of the North China Plate.Based on the latest 3D seismic data and previous research results,this study intends to discuss the zonal differential deformation characteristics and genetic mechanism of the Mesoproterozoic rifts in the Ordos Basin.NE-trending rifts are developed in the Mesoproterozoic in the south-central Ordos Basin,the main part of which are located near the western margin of the North China Plate.NNW-trending rifts are developed in the north of the basin,while NW-NNW rifts in the Mesoproterozoic in Hangjinqi area.The genetic mechanism of the Mesoproterozoic rifts is related to regional extensional stress field,plate boundary conditions and internal preexisting structures.The main extensional stress direction strikes NWW-SSE(120°)in the western margin of the North China Plate,based on the forward rift trend of the northern Mesoproterozoic.In Hangjinqi area,the reactivation of the existing NWtrending Wulansu fault and NW-NW-trending Daolao fault,results in dextral shear stress field.The boundary between the western margin of the North China Plate and its adjacent plates forms a nearly NS-trending preexisting basement tectonic belt,which intersects with the NWW-SSE(120°)extensional stress at an acute angle of 60°.Therefore,the western margin of the North China Plate is formed by oblique normal faults under oblique extension.Due to the long time span of Columbia Supercontinent breakup(1.8e1.6 Ga),the oblique rift in the south-central Ordos Basin is formed under the continuous oblique extension at the western margin of the North China Plate.展开更多
By benchmarking with the iteration of drilling technology,fracturing technology and well placement mode for shale oil and gas development in the United States and considering the geological characteristics and develop...By benchmarking with the iteration of drilling technology,fracturing technology and well placement mode for shale oil and gas development in the United States and considering the geological characteristics and development difficulties of shale oil in the Jiyang continental rift lake basin,East China,the development technology system suitable for the geological characteristics of shale oil in continental rift lake basins has been primarily formed through innovation and iteration of the development,drilling and fracturing technologies.The technology system supports the rapid growth of shale oil production and reduces the development investment cost.By comparing it with the shale oil development technology in the United States,the prospect of the shale oil development technology iteration in continental rift lake basins is proposed.It is suggested to continuously strengthen the overall three-dimensional development,improve the precision level of engineering technology,upgrade the engineering technical indicator system,accelerate the intelligent optimization of engineering equipment,explore the application of complex structure wells,form a whole-process integrated quality management system from design to implementation,and constantly innovate the concept and technology of shale oil development,so as to promote the realization of extensive,beneficial and high-quality development of shale oil in continental rift lake basins.展开更多
Based on seismic,drilling,and source rock analysis data,the petroleum geological characteristics and future exploration direction of the oil-rich sags in the Central and West African Rift System(CWARS)are discussed.Th...Based on seismic,drilling,and source rock analysis data,the petroleum geological characteristics and future exploration direction of the oil-rich sags in the Central and West African Rift System(CWARS)are discussed.The study shows that the Central African Rift System mainly develops high-quality lacustrine source rocks in the Lower Cretaceous,and the West African Rift System mainly develops high-quality terrigenous organic matter-rich marine source rocks in the Upper Cretaceous,and the two types of source rocks provide a material basis for the enrichment of oil and gas in the CWARS.Multiple sets of reservoir rocks including fractured basement and three sets of regional cap rocks in the Lower Cretaceous,the Upper Cretaceous,and the Paleogene are developed in the CWARS.Since the Late Mesozoic,due to the geodynamic factors including the dextral strike-slip movement of the Central African Shear Zone,the basins in different directions of the CWARS differ in terms of rifting stages,intervals of regional cap rocks,trap types and accumulation models.The NE-SW trending basins have mainly preserved one stage of rifting in the Early Cretaceous,with regional cap rocks developed in the Lower Cretaceous strata,forming traps of reverse anticlines,flower-shaped structures and basement buried hill,and two types of hydrocarbon accumulation models of"source and reservoir in the same formation,and accumulation inside source rocks"and"up-source and down-reservoir,and accumulation below source rocks".The NW–SE basins are characterized by multiple rifting stages superimposition,with the development of regional cap rocks in the Upper Cretaceous and Paleogene,forming traps of draping anticlines,faulted anticlines,antithetic fault blocks and the accumulation model of"down-source and up-reservoir,and accumulation above source rocks".The combination of reservoir and cap rocks inside source rocks of basins with multiple superimposed rifting stages,as well as the lithologic reservoirs and the shale oil inside source rocks of strong inversion basins are important fields for future exploration in basins of the CWARS.展开更多
Based on the latest drilling, seismic and field outcrop data, the geological characteristics(e.g. strata, development and sedimentary evolution) of the southern segment of the Late Sinian–Early Cambrian Deyang–Anyue...Based on the latest drilling, seismic and field outcrop data, the geological characteristics(e.g. strata, development and sedimentary evolution) of the southern segment of the Late Sinian–Early Cambrian Deyang–Anyue rift trough in the Sichuan Basin are analyzed. First, the strata in the southern segment are complete. The first to second members of Dengying Formation(Deng 1 + Deng 2) are found with relatively stable thickness(400–550 m), and the third to fourth members(Deng 3+ Deng 4) show great thickness difference between the marginal trough and the inner trough, which is up to 250 m. The Cambrian Maidiping Formation and Qiongzhusi Formation in southern Sichuan Basin are relatively thin, with the thickness changing greatly and frequently. Second, the Deyang–Anyue rift trough extended southward during the Deng 4 period, affecting southern Sichuan Basin. Compared to the middle and northern segments of the rift trough, the southern segment is generally wide, gentle and shallow, with multiple steps, and alternating uplifts and sags, which are distributed in finger shape. Third, the Deng 1 + Deng 2 in southern Sichuan Basin records the dominance of carbonate platform and unobvious sedimentary differentiation, and the Deng 4 exhibits obvious sedimentary differentiation, namely, basin–slope–secondary slope–slope–secondary slope–platform margin–restricted platform, from the inner trough to the marginal trough. Fourth, the rift trough in southern Sichuan Basin has evolved in four stages: stabilization of Deng 1–Deng 2, initialization of Deng 3–Deng 4, filling of Maidiping–Qiongzhusi, and extinction of Canglangpu Formation.展开更多
The Merguechoum fluorite-barite mineralization,located in the Eastern Meseta of Morocco,is hosted in the Late Hercynian granite.The ore consists of fine crystals of fluorite 1,massive barite 1,euhedral crystals of flu...The Merguechoum fluorite-barite mineralization,located in the Eastern Meseta of Morocco,is hosted in the Late Hercynian granite.The ore consists of fine crystals of fluorite 1,massive barite 1,euhedral crystals of fluorite 2,and barite 2 with calcite and minor quartz and sulfides.The Merguechoum ore deposits have never been investigated.This study was the first contribution that studied the genesis of fluorite and barite.The ore occurs as dissemination within granite intrusion and also fills the NE-SWtrending meter-sized fractures and faults.The values of the total Rare Earth Elements and Yttrium(REY)and the ratios of LREY/HREY,Y/Ho,Tb/Ca,and Tb/La indicate that the Merguechoum fluorite precipitated from hydrothermal fluids,likely basinal brines,which interacted with the Hercynian granite.The REY data indicate that the ore-forming fluids of the early stage have intensely interacted with the Hercynian granite compared to those of the late ore stage.The gradual decrease in the europium(Eu/Eu^(*)),yttrium(Y/Y^(*)),and cerium(Ce/Ce^(*))anomalies and a low concentration ofΣREY observed in the second ore stage compared to the first ore stage suggest an increase in p H and fO_(2)and by inference a decrease in temperature during the evolution of the hydrothermal system.This evolution could be explained by fluid mixing between the ascending basinal hydrothermal fluids and the diluted sulfate-rich meteoric water barite separates from selected samples reveal that the dissolved sulfates(SO_(4)^(2-))were derived from Permian–Triassic sulfates and/or coeval poreseawater sulfates.The proposed fluid mixing triggered the precipitation of an early-stage F-Ba assemblage followed by the second-stage F-Ba mineralization.Geologic fieldwork,REY inventories,and isotope data point to the ore genesis during the Permian–Triassic extensional tectonic activity concerning the Pangea rifting.This extensional tectonic environment is likely the driving force that mobilized a large amount of the ore-forming basinal brines along the available faults and fractures to the loci of ore deposition.展开更多
Based on the seismic, logging, drilling and other data, the distribution, structural types and mound-shoal hydrocarbon accumulation characteristics of platform margins of the Sinian Dengying Formation in the Deyang-An...Based on the seismic, logging, drilling and other data, the distribution, structural types and mound-shoal hydrocarbon accumulation characteristics of platform margins of the Sinian Dengying Formation in the Deyang-Anyue Rift and its periphery were analyzed. Four types of platform margins are developed in the Dengying Formation, i.e., single-stage fault-controlled platform margin, multi-stage fault-controlled platform margin, gentle slope platform margin, and overlapping platform margin. In the Gaoshiti West-Weiyuan East area, single-stage fault controlled platform margins are developed in the Deng 2 Member, which trend in nearly NEE direction and are shielded by faults and mudstones, forming fault-controlled–lithologic traps. In the Lezhi-Penglai area, independent and multi-stage fault controlled platform margins are developed in the Deng 2 Member, which trend in NE direction and are controlled by synsedimentary faults;the mound-shoal complexes are aggraded and built on the hanging walls of the faults, and they are shielded by tight intertidal belts and the Lower Cambrian source rocks in multiple directions, forming fault-controlled–lithologic and other composite traps. In the Weiyuan-Ziyang area, gentle slope platform margins are developed in the Deng 2 Member, which trend in NW direction;the mound-shoal complexes are mostly thin interbeds as continuous bands and shielded by tight intertidal belts in the updip direction, forming lithologic traps. In the Gaoshiti-Moxi-Yanting area, overlapping platform margins are developed in the Deng 2 and Deng 4 members;the mound-shoal complexes are aggraded and overlaid to create platform margin buildup with a huge thickness and sealed by tight intertidal belts and the Lower Cambrian mudstones in the updip direction, forming large-scale lithologic traps on the north slope of the Central Sichuan Paleouplift. To summarize, the mound-shoal complexes on the platform margins in the Dengying Formation in the Penglai-Zhongjiang area, Moxi North-Yanting area and Weiyuan-Ziyang area are large in scale, with estimated resources of 1.58×1012 m3, and they will be the key targets for the future exploration of the Dengying Formation in the Sichuan Basin.展开更多
Rifted margins in the central South Atlantic portray spatial variability in terms of preserved width and thickness,which relates to complex rift-related fault activities.However,there is still a lack of systematic and...Rifted margins in the central South Atlantic portray spatial variability in terms of preserved width and thickness,which relates to complex rift-related fault activities.However,there is still a lack of systematic and quantitative explanations for the causes of the variations that are observed along the paired rifts.To elucidate this issue,2D viscous-plastic thermomechanical numerical models are applied to capture the behavior of deformation,in which we investigate the effects of extensional rate,crustal strength and thickness on crust-mantle coupling,and timing of transition from rifting to breakup.Our numerical experiments demonstrate that crust-mantle decoupling accounts for crustal hyperextension,and that incorporating moderate-intensity rheology into lower crust may yield insights into the hyper-extended crust and asymmetric architecture observed in the central South Atlantic.The results also suggest that undulations in lithospheric basement cause asymmetric mantle upwelling.The lower crust of fold belts takes priority to be thermally weakened over craton and induces rift migration simultaneously.A new mechanism for the formation of failed rift is described,where the mechanical decoupling derived from thermally weakened lower crust gives access to dual rift migration.These results reinforce the interpretation on how crustal rheology shapes margins architectures and highlight the first-order effects of crust-mantle coupling.展开更多
Nyiragongo volcanic eruptions of 1977 and 2002 emitted silica-undersaturated lavas named melilite-nephelinites with microlithic to sub-porphyritic textures, and consisted of olivine, clinopyroxene (augite), phlogopite...Nyiragongo volcanic eruptions of 1977 and 2002 emitted silica-undersaturated lavas named melilite-nephelinites with microlithic to sub-porphyritic textures, and consisted of olivine, clinopyroxene (augite), phlogopite, melilite, magnetite, and rare plagioclases. This melilite-nephelinite as an evolved rock, shows low SiO<sub>2</sub> (38.40 - 39.52 wt%) and MgO (3.10 - 4.01 wt%), and relatively high FeOt (13.76 - 14.10 wt%), Al<sub>2</sub>O<sub>3</sub> (15.01 - 16.48 wt%), CaO (11.00 - 12.29 wt%) and Na<sub>2</sub>O + K<sub>2</sub>O (10.34 - 11.85 wt%). Unlike LA-ICP-MS on silicate melt inclusions (SMIs) hosted in augite show a pristine melt of picrobasaltic (low Ti-picrite) rock poor in SiO<sub>2</sub> (31.14 - 32.26 wt%), FeOt (2.19 - 2.79 wt%), Al<sub>2</sub>O<sub>3</sub> (8.01 - 9.57 wt%), and Na<sub>2</sub>O + K<sub>2</sub>O (2.34 - 3.05 wt%), while enriched in MgO (20.27 - 28.63 wt%), and CaO (24.95 - 33.17 wt%). The sums (∑REEs) for lavas and SMIs are ranging 712 - 799 and 43 - 119 ppm respectively. REE contracted multi-element patterns showed a W-feature for most lavas except for SMIs. High Rb/Sr, and low Ba/Rb, Zr/Nb, and Sm/Hf ratios of lavas suggest a phlogopite-rich source of materials. .展开更多
Nan'an Basin is a giant hydrocarbon basin,but its tectonic division scheme and associated fault systems has not been well understood.Based on newly acquired seismic data from the southwestern margin of the South C...Nan'an Basin is a giant hydrocarbon basin,but its tectonic division scheme and associated fault systems has not been well understood.Based on newly acquired seismic data from the southwestern margin of the South China Sea,this study analyzed the structural units,tectonic feature and geodynamics of the sedimentary basin.The new data suggests that the Nan0 an Basin is a rift basin oriented in the NE-SW direction,rather than a pull-apart basin induced by strike-slip faults along the western margin.The basin is a continuation of the rifts in the southwest South China Sea since the late Cretaceous.It continued rifting until the middle Miocene,even though oceanic crust occurred in the Southwest Subbasin.However,it had no transfer surface at the end of spreading,where it was characterized by a late middle Miocene unconformity(reflector T3).The Nan'an Basin can be divided into eight structural units by a series of NE-striking faults.This study provides evidences to confirm the relative importance and interplay between regional strike-slips and orthogonal displacement during basin development and deformation.The NE-SW-striking dominant rift basin indicates that the geodynamic drivers of tectonic evolution in the western margin of the South China Sea did not have a large strike-slip mechanism.Therefore,we conclude that a large strike-slip fault system did not exist in the western margin of the South China Sea.展开更多
Based on the comprehensive analysis of core, thin section, logging and seismic data, this study carried out the identification and comparison of Permian Changxing Formation sequences, clarified the typical sedimentary...Based on the comprehensive analysis of core, thin section, logging and seismic data, this study carried out the identification and comparison of Permian Changxing Formation sequences, clarified the typical sedimentary architectures of intra-platform shoal, investigated the vertical and horizontal development and distribution of intra-platform shoal in each sequence, and thus established the sedimentary evolution model of shoal body. The study results are reflected in four aspects.First, there are two complete third-order sequences(SQ1 and SQ2) in Changxing Formation in central Sichuan Basin. SQ1 is generally thick in the north and thin in the south, and SQ2 shows a thickness differentiation trend of “two thicknesses and three thinnesses”. Second, the Changxing Formation in central Sichuan Basin mainly develops intra-platform shoal, inter-shoal sea and intra-platform depression subfacies. In the vertical direction, the intra-platform shoal mainly presents two typical sedimentary sequences: stable superposed and high-frequency interbedded. Third, the stable superimposed sedimentary sequence is developed in the shoal belt at the edge of intra-platform depression, which is composed of two shoal-forming periods and located in the highstand systems tracts(HSTs) of SQ1 and SQ2. The high-frequency interbedded sedimentary sequence is developed in the southern shoal belt of intra-platform depression, which is composed of four shoal-forming periods and mainly located in the HST of SQ2. Fourth, during the SQ1 deposition, the intra-platform shoal was mainly developed at the edge of the intra-platform depression on the north side of the study area, and the inter-shoal sea subfacies was mainly developed on the south side. During the SQ2 deposition, the intra-platform shoal was widely developed in the area, forming two nearly parallel intra-platform shoal belts. The study results provide direction and ideas for exploration of Changxing Formation intra-platform shoal reservoirs in central Sichuan Basin.展开更多
Coarse-grained subaqueous fans are vital oil and gas exploration targets in the Bohai Bay basin,China.The insufficient understanding of their sedimentary processes,depositional patterns,and controlling factors restric...Coarse-grained subaqueous fans are vital oil and gas exploration targets in the Bohai Bay basin,China.The insufficient understanding of their sedimentary processes,depositional patterns,and controlling factors restricts efficient exploration and development.Coarse-grained subaqueous fans in the Yong′an area,Dongying Depression,are investigated in this study.These fans include nearshore subaqueous fans,and sublacustrine fans,and their sedimentary processes,depositional patterns and distribution characteristics are mainly controlled by tectonic activity and paleogeomorphology.Nearshore subaqueous fans developed near the boundary fault during the early–middle deposition stage due to strong tectonic activity and large topographic subsidence.Early sublacustrine fans developed at the front of the nearshore subaqueous fans in the area where the topography changed from gentle to steep along the source direction.While the topography was gentle,sublacustrine fans did not develop.During the late weak tectonic activity stage,late sublacustrine fans developed with multiple stages superimposed.Frequent fault activity and related earthquakes steepened the basin margin,and the boundary fault slopes were 25.9°–34°.During the early–middle deposition stage,hyperpycnal flows triggered by outburst floods developed.During the late deposition stage,with weak tectonic activity,seasonal floods triggered hyperpycnal flows,and hybrid event beds developed distally.展开更多
Ice-shelf rifts are precursors of glacier calving, and thus they serve as indicators of ice shelf instability, especially under oceanic and atmospheric warming conditions. Therefore, understanding the dynamic processe...Ice-shelf rifts are precursors of glacier calving, and thus they serve as indicators of ice shelf instability, especially under oceanic and atmospheric warming conditions. Therefore, understanding the dynamic processes underlying rift propagation and the associated damage mechanisms is essential to evaluate ice-shelf instability and to predict glacier calving. In this study, we investigated the effect of marginal weakening on rift propagation on the ice shelf of the Petermann Glacier, among the largest in Greenland, during 2016-2022. First, we analyzed satellite optical images to monitor rift growth(length and width) by tracking the tip trajectory of three large rifts identified on the Petermann Ice Shelf. Then, we estimated rift depth using ArcticDEM and ICESat-2 data. Our results indicated consistent increases of the rift widths and depths over the study period, with mean values of 133 m·a^(-1) and 0.3 m·a^(-1), respectively. We also combined remote-sensing observations with an ice-sheet numerical model to calculate the stress and damage fields on the Petermann Ice Shelf and to assess the ice shelf margin stability and strength. We determined that damage and lateral shear in the fracture zone degraded ice shelf integrity by decreasing the contact length with the fjord wall. In conclusion, marginal weakening effectively promoted rift propagation on the Petermann Ice Shelf, increasing the risk of future glacier calving.展开更多
Transfer zones are structural areas of faults interactions where fault motion or displacement can be transferred from one fault to another, regional strain maintains laterally constant. Transfer zones are widely devel...Transfer zones are structural areas of faults interactions where fault motion or displacement can be transferred from one fault to another, regional strain maintains laterally constant. Transfer zones are widely developed in rift basins and have significance on hydrocarbon accumulation. In this review article, we attempt to summarize recent advances on the types, distance-displacement curves, evolutionary stages and controlling factors of transfer zones in rift basins and their effects on sedimentary systems, reservoir properties, trap formation and hydrocarbon migration. The formation of transfer zones is genetically related to the segmented growth of normal faults. Depending on the degree of interaction between these normal faults, transfer zones in rift basins could be divided into two types: soft-linked and hard-linked, which are further subdivided into transfer slope, oblique anticline, horst and transfer fault based on the combination patterns of normal faults. In general, the development of transfer zones experiences several stages including isolated normal faulting, transfer slope forming, complicating and breaking. During the interaction and growth of segmented normal faults, stress-strain and spatial array of faults, pre-existing basement structures, and mechanical conditions of rocks have a great influence on the location and development processes of transfer zones. A transfer zone is commonly considered as a pathway for conveying sediments from provenance to basin, and it hence exerts an essential control on the distribution of sandbodies. In addition, transfer zone is the area where stresses are concentrated, which facilitates the formation of various types of structural traps, and it is also a favorable conduit for hydrocarbon migration. Consequently, there exists great hydrocarbon potentials in transfer zones to which more attention should be given.展开更多
文摘Background: Vaccinations for animals are crucial for food production, animal welfare, public health, and animal health. They are an affordable way to stop animal sickness, increase food production efficiency, and lessen or stop the spread of zoonotic diseases to humans. Animal vaccines that are both safe and efficacious are vital to modern culture. The vaccine should induce a strong, protective and prolonged immune response against the antigenic factor. In order to achieve these goals, novel vaccination techniques and an efficient adjuvant are required to render the vaccine immunogenically protective and trigger a strong immune response. Aim: Our study aims to promote and enhance the immunogenicity against RVF virus disease through lyophilized inactivated RVF vaccine through induction of early cellular, high and prolonged humeral immunity in vaccinated animals using cabopol as stabilizer and Saponin or normal saline as a diluent at time of vaccination. Moreover, manufacturing of these vaccines is easy to be done. Results: The gained results revealed that RVF freeze-dried vaccine with Carbopol that reconstituted using Saponin elicited better immune response than that reconstituted using normal saline (NaCl). The cell mediated immune response as represented by lymphocyte blastogenesis and phagocytic activity were markedly increased with high levels when we used Saponin as a diluent than that in group vaccinated with vaccine diluted with NaCl, on the other side the humeral immune response in group vaccinated using the Saponin as diluent is more detected and stayed within the protective level till the end of 11<sup>th</sup> month post vaccination (1.5 TCID<sub>50</sub>) while the immune response induced after using normal saline as a diluent stayed within the protective level till the end of 10<sup>th</sup> month post vaccination (1.8 TCID<sub>50</sub>). Conclusion: The use of Saponin as a diluent for reconstitution of the freeze dried RVF vaccine is preferable than the use of normal saline enhancing both sheep cellular and humeral immune response.
基金Supported by the National Natural Science Foundation of China(42172177)CNPC Scientific Research and Technological Development Project(2021DJ05)PetroChina-Southwest University of Petroleum Innovation Consortium Project(2020CX020000).
文摘Based on the study of the distribution of intra-platform shoals and the characteristics of dolomite reservoirs in the Middle Permian Qixia Formation in the Gaoshiti–Moxi area of the Sichuan Basin,SW China,the controlling factors of reservoir development were analyzed,and the formation model of“intra-platform shoal thin-layer dolomite reservoir”was established.The Qixia Formation is a regressive cycle from bottom to top,in which the first member(Qi1 Member)develops low-energy open sea microfacies,and the second member(Qi2 Member)evolves into intra-platform shoal and inter-shoal sea with decreases in sea level.The intra-platform shoal is mainly distributed near the top of two secondary shallowing cycles of the Qi2 Member.The most important reservoir rock of the Qixia Formation is thin-layer fractured-vuggy dolomite,followed by vuggy dolomite.The semi-filled saddle dolomite is common in fracture-vug,and intercrystalline pores and residual dissolution pores combined with fractures to form the effective pore-fracture network.Based on the coupling analysis of sedimentary and diagenesis characteristics,the reservoir formation model of“pre-depositional micro-paleogeomorphology controlling shoal,sedimentary shoal controlling dolomite,penecontemporaneous dolomite benefiting preservation of pores,and late hydrothermal action effectively improving reservoir quality”was systematically established.The“first-order high zone”micro-paleogeomorphology before the deposition of the Qixia Formation controlled the development of large area of intra-platform shoals in Gaoshiti area during the deposition of the Qi2 Member.Shoal facies is the basic condition of early dolomitization,and the distribution range of intra-platform shoal and dolomite reservoir is highly consistent.The grain limestone of shoal facies is transformed by two stages of dolomitization.The penecontemporaneous dolomitization is conducive to the preservation of primary pores and secondary dissolved pores.The burial hydrothermal fluid enters the early dolomite body along the fractures associated with the Emeishan basalt event,makes it recrystallized into medium–coarse crystal dolomite.With the intercrystalline pores and the residual vugs after the hydrothermal dissolution along the fractures,the high-quality intra-platform shoal-type thin-layer dolomite reservoirs are formed.The establishment of this reservoir formation model can provide important theoretical support for the sustainable development of Permian gas reservoirs in the Sichuan Basin.
文摘The Mesoproterozoic rifts are developed in the Ordos Basin located in the western margin of the North China Plate.Based on the latest 3D seismic data and previous research results,this study intends to discuss the zonal differential deformation characteristics and genetic mechanism of the Mesoproterozoic rifts in the Ordos Basin.NE-trending rifts are developed in the Mesoproterozoic in the south-central Ordos Basin,the main part of which are located near the western margin of the North China Plate.NNW-trending rifts are developed in the north of the basin,while NW-NNW rifts in the Mesoproterozoic in Hangjinqi area.The genetic mechanism of the Mesoproterozoic rifts is related to regional extensional stress field,plate boundary conditions and internal preexisting structures.The main extensional stress direction strikes NWW-SSE(120°)in the western margin of the North China Plate,based on the forward rift trend of the northern Mesoproterozoic.In Hangjinqi area,the reactivation of the existing NWtrending Wulansu fault and NW-NW-trending Daolao fault,results in dextral shear stress field.The boundary between the western margin of the North China Plate and its adjacent plates forms a nearly NS-trending preexisting basement tectonic belt,which intersects with the NWW-SSE(120°)extensional stress at an acute angle of 60°.Therefore,the western margin of the North China Plate is formed by oblique normal faults under oblique extension.Due to the long time span of Columbia Supercontinent breakup(1.8e1.6 Ga),the oblique rift in the south-central Ordos Basin is formed under the continuous oblique extension at the western margin of the North China Plate.
基金Supported by the Strategic Research and Technical Consultation Project of Sinopec Science and Technology CommissionSinopec Major Science and Technology Project(P22037)。
文摘By benchmarking with the iteration of drilling technology,fracturing technology and well placement mode for shale oil and gas development in the United States and considering the geological characteristics and development difficulties of shale oil in the Jiyang continental rift lake basin,East China,the development technology system suitable for the geological characteristics of shale oil in continental rift lake basins has been primarily formed through innovation and iteration of the development,drilling and fracturing technologies.The technology system supports the rapid growth of shale oil production and reduces the development investment cost.By comparing it with the shale oil development technology in the United States,the prospect of the shale oil development technology iteration in continental rift lake basins is proposed.It is suggested to continuously strengthen the overall three-dimensional development,improve the precision level of engineering technology,upgrade the engineering technical indicator system,accelerate the intelligent optimization of engineering equipment,explore the application of complex structure wells,form a whole-process integrated quality management system from design to implementation,and constantly innovate the concept and technology of shale oil development,so as to promote the realization of extensive,beneficial and high-quality development of shale oil in continental rift lake basins.
基金Supported by the National Natural Science Foundation Project(92255302)National Science and Technology Major Project(2016ZX05029005)Scientific Research and Technological Development Project of PetroChina(2021DJ31).
文摘Based on seismic,drilling,and source rock analysis data,the petroleum geological characteristics and future exploration direction of the oil-rich sags in the Central and West African Rift System(CWARS)are discussed.The study shows that the Central African Rift System mainly develops high-quality lacustrine source rocks in the Lower Cretaceous,and the West African Rift System mainly develops high-quality terrigenous organic matter-rich marine source rocks in the Upper Cretaceous,and the two types of source rocks provide a material basis for the enrichment of oil and gas in the CWARS.Multiple sets of reservoir rocks including fractured basement and three sets of regional cap rocks in the Lower Cretaceous,the Upper Cretaceous,and the Paleogene are developed in the CWARS.Since the Late Mesozoic,due to the geodynamic factors including the dextral strike-slip movement of the Central African Shear Zone,the basins in different directions of the CWARS differ in terms of rifting stages,intervals of regional cap rocks,trap types and accumulation models.The NE-SW trending basins have mainly preserved one stage of rifting in the Early Cretaceous,with regional cap rocks developed in the Lower Cretaceous strata,forming traps of reverse anticlines,flower-shaped structures and basement buried hill,and two types of hydrocarbon accumulation models of"source and reservoir in the same formation,and accumulation inside source rocks"and"up-source and down-reservoir,and accumulation below source rocks".The NW–SE basins are characterized by multiple rifting stages superimposition,with the development of regional cap rocks in the Upper Cretaceous and Paleogene,forming traps of draping anticlines,faulted anticlines,antithetic fault blocks and the accumulation model of"down-source and up-reservoir,and accumulation above source rocks".The combination of reservoir and cap rocks inside source rocks of basins with multiple superimposed rifting stages,as well as the lithologic reservoirs and the shale oil inside source rocks of strong inversion basins are important fields for future exploration in basins of the CWARS.
基金Supported by the PetroChina Science and Technology Project (2021DJ0605,2022KT0101)the CNPC Major Science and Technology Project (2021DJ0501)。
文摘Based on the latest drilling, seismic and field outcrop data, the geological characteristics(e.g. strata, development and sedimentary evolution) of the southern segment of the Late Sinian–Early Cambrian Deyang–Anyue rift trough in the Sichuan Basin are analyzed. First, the strata in the southern segment are complete. The first to second members of Dengying Formation(Deng 1 + Deng 2) are found with relatively stable thickness(400–550 m), and the third to fourth members(Deng 3+ Deng 4) show great thickness difference between the marginal trough and the inner trough, which is up to 250 m. The Cambrian Maidiping Formation and Qiongzhusi Formation in southern Sichuan Basin are relatively thin, with the thickness changing greatly and frequently. Second, the Deyang–Anyue rift trough extended southward during the Deng 4 period, affecting southern Sichuan Basin. Compared to the middle and northern segments of the rift trough, the southern segment is generally wide, gentle and shallow, with multiple steps, and alternating uplifts and sags, which are distributed in finger shape. Third, the Deng 1 + Deng 2 in southern Sichuan Basin records the dominance of carbonate platform and unobvious sedimentary differentiation, and the Deng 4 exhibits obvious sedimentary differentiation, namely, basin–slope–secondary slope–slope–secondary slope–platform margin–restricted platform, from the inner trough to the marginal trough. Fourth, the rift trough in southern Sichuan Basin has evolved in four stages: stabilization of Deng 1–Deng 2, initialization of Deng 3–Deng 4, filling of Maidiping–Qiongzhusi, and extinction of Canglangpu Formation.
文摘The Merguechoum fluorite-barite mineralization,located in the Eastern Meseta of Morocco,is hosted in the Late Hercynian granite.The ore consists of fine crystals of fluorite 1,massive barite 1,euhedral crystals of fluorite 2,and barite 2 with calcite and minor quartz and sulfides.The Merguechoum ore deposits have never been investigated.This study was the first contribution that studied the genesis of fluorite and barite.The ore occurs as dissemination within granite intrusion and also fills the NE-SWtrending meter-sized fractures and faults.The values of the total Rare Earth Elements and Yttrium(REY)and the ratios of LREY/HREY,Y/Ho,Tb/Ca,and Tb/La indicate that the Merguechoum fluorite precipitated from hydrothermal fluids,likely basinal brines,which interacted with the Hercynian granite.The REY data indicate that the ore-forming fluids of the early stage have intensely interacted with the Hercynian granite compared to those of the late ore stage.The gradual decrease in the europium(Eu/Eu^(*)),yttrium(Y/Y^(*)),and cerium(Ce/Ce^(*))anomalies and a low concentration ofΣREY observed in the second ore stage compared to the first ore stage suggest an increase in p H and fO_(2)and by inference a decrease in temperature during the evolution of the hydrothermal system.This evolution could be explained by fluid mixing between the ascending basinal hydrothermal fluids and the diluted sulfate-rich meteoric water barite separates from selected samples reveal that the dissolved sulfates(SO_(4)^(2-))were derived from Permian–Triassic sulfates and/or coeval poreseawater sulfates.The proposed fluid mixing triggered the precipitation of an early-stage F-Ba assemblage followed by the second-stage F-Ba mineralization.Geologic fieldwork,REY inventories,and isotope data point to the ore genesis during the Permian–Triassic extensional tectonic activity concerning the Pangea rifting.This extensional tectonic environment is likely the driving force that mobilized a large amount of the ore-forming basinal brines along the available faults and fractures to the loci of ore deposition.
基金Supported by the Science and Technology Project of PetroChina (2021DJ0605)。
文摘Based on the seismic, logging, drilling and other data, the distribution, structural types and mound-shoal hydrocarbon accumulation characteristics of platform margins of the Sinian Dengying Formation in the Deyang-Anyue Rift and its periphery were analyzed. Four types of platform margins are developed in the Dengying Formation, i.e., single-stage fault-controlled platform margin, multi-stage fault-controlled platform margin, gentle slope platform margin, and overlapping platform margin. In the Gaoshiti West-Weiyuan East area, single-stage fault controlled platform margins are developed in the Deng 2 Member, which trend in nearly NEE direction and are shielded by faults and mudstones, forming fault-controlled–lithologic traps. In the Lezhi-Penglai area, independent and multi-stage fault controlled platform margins are developed in the Deng 2 Member, which trend in NE direction and are controlled by synsedimentary faults;the mound-shoal complexes are aggraded and built on the hanging walls of the faults, and they are shielded by tight intertidal belts and the Lower Cambrian source rocks in multiple directions, forming fault-controlled–lithologic and other composite traps. In the Weiyuan-Ziyang area, gentle slope platform margins are developed in the Deng 2 Member, which trend in NW direction;the mound-shoal complexes are mostly thin interbeds as continuous bands and shielded by tight intertidal belts in the updip direction, forming lithologic traps. In the Gaoshiti-Moxi-Yanting area, overlapping platform margins are developed in the Deng 2 and Deng 4 members;the mound-shoal complexes are aggraded and overlaid to create platform margin buildup with a huge thickness and sealed by tight intertidal belts and the Lower Cambrian mudstones in the updip direction, forming large-scale lithologic traps on the north slope of the Central Sichuan Paleouplift. To summarize, the mound-shoal complexes on the platform margins in the Dengying Formation in the Penglai-Zhongjiang area, Moxi North-Yanting area and Weiyuan-Ziyang area are large in scale, with estimated resources of 1.58×1012 m3, and they will be the key targets for the future exploration of the Dengying Formation in the Sichuan Basin.
基金financially supported by the National Science and Technology Major Project(Grant No.2019005705)。
文摘Rifted margins in the central South Atlantic portray spatial variability in terms of preserved width and thickness,which relates to complex rift-related fault activities.However,there is still a lack of systematic and quantitative explanations for the causes of the variations that are observed along the paired rifts.To elucidate this issue,2D viscous-plastic thermomechanical numerical models are applied to capture the behavior of deformation,in which we investigate the effects of extensional rate,crustal strength and thickness on crust-mantle coupling,and timing of transition from rifting to breakup.Our numerical experiments demonstrate that crust-mantle decoupling accounts for crustal hyperextension,and that incorporating moderate-intensity rheology into lower crust may yield insights into the hyper-extended crust and asymmetric architecture observed in the central South Atlantic.The results also suggest that undulations in lithospheric basement cause asymmetric mantle upwelling.The lower crust of fold belts takes priority to be thermally weakened over craton and induces rift migration simultaneously.A new mechanism for the formation of failed rift is described,where the mechanical decoupling derived from thermally weakened lower crust gives access to dual rift migration.These results reinforce the interpretation on how crustal rheology shapes margins architectures and highlight the first-order effects of crust-mantle coupling.
文摘Nyiragongo volcanic eruptions of 1977 and 2002 emitted silica-undersaturated lavas named melilite-nephelinites with microlithic to sub-porphyritic textures, and consisted of olivine, clinopyroxene (augite), phlogopite, melilite, magnetite, and rare plagioclases. This melilite-nephelinite as an evolved rock, shows low SiO<sub>2</sub> (38.40 - 39.52 wt%) and MgO (3.10 - 4.01 wt%), and relatively high FeOt (13.76 - 14.10 wt%), Al<sub>2</sub>O<sub>3</sub> (15.01 - 16.48 wt%), CaO (11.00 - 12.29 wt%) and Na<sub>2</sub>O + K<sub>2</sub>O (10.34 - 11.85 wt%). Unlike LA-ICP-MS on silicate melt inclusions (SMIs) hosted in augite show a pristine melt of picrobasaltic (low Ti-picrite) rock poor in SiO<sub>2</sub> (31.14 - 32.26 wt%), FeOt (2.19 - 2.79 wt%), Al<sub>2</sub>O<sub>3</sub> (8.01 - 9.57 wt%), and Na<sub>2</sub>O + K<sub>2</sub>O (2.34 - 3.05 wt%), while enriched in MgO (20.27 - 28.63 wt%), and CaO (24.95 - 33.17 wt%). The sums (∑REEs) for lavas and SMIs are ranging 712 - 799 and 43 - 119 ppm respectively. REE contracted multi-element patterns showed a W-feature for most lavas except for SMIs. High Rb/Sr, and low Ba/Rb, Zr/Nb, and Sm/Hf ratios of lavas suggest a phlogopite-rich source of materials. .
基金This research was financially supported by Natural Science Foundation of China(U1701245,No.91228208)CGS project(DD20190213)CNPC project(kt 2021-02-02).
文摘Nan'an Basin is a giant hydrocarbon basin,but its tectonic division scheme and associated fault systems has not been well understood.Based on newly acquired seismic data from the southwestern margin of the South China Sea,this study analyzed the structural units,tectonic feature and geodynamics of the sedimentary basin.The new data suggests that the Nan0 an Basin is a rift basin oriented in the NE-SW direction,rather than a pull-apart basin induced by strike-slip faults along the western margin.The basin is a continuation of the rifts in the southwest South China Sea since the late Cretaceous.It continued rifting until the middle Miocene,even though oceanic crust occurred in the Southwest Subbasin.However,it had no transfer surface at the end of spreading,where it was characterized by a late middle Miocene unconformity(reflector T3).The Nan'an Basin can be divided into eight structural units by a series of NE-striking faults.This study provides evidences to confirm the relative importance and interplay between regional strike-slips and orthogonal displacement during basin development and deformation.The NE-SW-striking dominant rift basin indicates that the geodynamic drivers of tectonic evolution in the western margin of the South China Sea did not have a large strike-slip mechanism.Therefore,we conclude that a large strike-slip fault system did not exist in the western margin of the South China Sea.
基金Supported by the PetroChina-Southwest Petroleum University Innovation Consortium Technology Cooperation Project (2020CX010000)。
文摘Based on the comprehensive analysis of core, thin section, logging and seismic data, this study carried out the identification and comparison of Permian Changxing Formation sequences, clarified the typical sedimentary architectures of intra-platform shoal, investigated the vertical and horizontal development and distribution of intra-platform shoal in each sequence, and thus established the sedimentary evolution model of shoal body. The study results are reflected in four aspects.First, there are two complete third-order sequences(SQ1 and SQ2) in Changxing Formation in central Sichuan Basin. SQ1 is generally thick in the north and thin in the south, and SQ2 shows a thickness differentiation trend of “two thicknesses and three thinnesses”. Second, the Changxing Formation in central Sichuan Basin mainly develops intra-platform shoal, inter-shoal sea and intra-platform depression subfacies. In the vertical direction, the intra-platform shoal mainly presents two typical sedimentary sequences: stable superposed and high-frequency interbedded. Third, the stable superimposed sedimentary sequence is developed in the shoal belt at the edge of intra-platform depression, which is composed of two shoal-forming periods and located in the highstand systems tracts(HSTs) of SQ1 and SQ2. The high-frequency interbedded sedimentary sequence is developed in the southern shoal belt of intra-platform depression, which is composed of four shoal-forming periods and mainly located in the HST of SQ2. Fourth, during the SQ1 deposition, the intra-platform shoal was mainly developed at the edge of the intra-platform depression on the north side of the study area, and the inter-shoal sea subfacies was mainly developed on the south side. During the SQ2 deposition, the intra-platform shoal was widely developed in the area, forming two nearly parallel intra-platform shoal belts. The study results provide direction and ideas for exploration of Changxing Formation intra-platform shoal reservoirs in central Sichuan Basin.
基金supported by the National Science Foundation of China(Grant Nos.41972099,4217020246)the National Science and Technology Major of China(Grant Nos.2017ZX05009-002,2017ZX05072-002)。
文摘Coarse-grained subaqueous fans are vital oil and gas exploration targets in the Bohai Bay basin,China.The insufficient understanding of their sedimentary processes,depositional patterns,and controlling factors restricts efficient exploration and development.Coarse-grained subaqueous fans in the Yong′an area,Dongying Depression,are investigated in this study.These fans include nearshore subaqueous fans,and sublacustrine fans,and their sedimentary processes,depositional patterns and distribution characteristics are mainly controlled by tectonic activity and paleogeomorphology.Nearshore subaqueous fans developed near the boundary fault during the early–middle deposition stage due to strong tectonic activity and large topographic subsidence.Early sublacustrine fans developed at the front of the nearshore subaqueous fans in the area where the topography changed from gentle to steep along the source direction.While the topography was gentle,sublacustrine fans did not develop.During the late weak tectonic activity stage,late sublacustrine fans developed with multiple stages superimposed.Frequent fault activity and related earthquakes steepened the basin margin,and the boundary fault slopes were 25.9°–34°.During the early–middle deposition stage,hyperpycnal flows triggered by outburst floods developed.During the late deposition stage,with weak tectonic activity,seasonal floods triggered hyperpycnal flows,and hybrid event beds developed distally.
基金funded by the National Key R&D Program of China (Grant nos. 2018YFC1406102, 2017YFA0603103)the grand from State Key Laboratory of Geodesy and Earth's Dynamics (Grant no. SKLGED2022-2-2)。
文摘Ice-shelf rifts are precursors of glacier calving, and thus they serve as indicators of ice shelf instability, especially under oceanic and atmospheric warming conditions. Therefore, understanding the dynamic processes underlying rift propagation and the associated damage mechanisms is essential to evaluate ice-shelf instability and to predict glacier calving. In this study, we investigated the effect of marginal weakening on rift propagation on the ice shelf of the Petermann Glacier, among the largest in Greenland, during 2016-2022. First, we analyzed satellite optical images to monitor rift growth(length and width) by tracking the tip trajectory of three large rifts identified on the Petermann Ice Shelf. Then, we estimated rift depth using ArcticDEM and ICESat-2 data. Our results indicated consistent increases of the rift widths and depths over the study period, with mean values of 133 m·a^(-1) and 0.3 m·a^(-1), respectively. We also combined remote-sensing observations with an ice-sheet numerical model to calculate the stress and damage fields on the Petermann Ice Shelf and to assess the ice shelf margin stability and strength. We determined that damage and lateral shear in the fracture zone degraded ice shelf integrity by decreasing the contact length with the fjord wall. In conclusion, marginal weakening effectively promoted rift propagation on the Petermann Ice Shelf, increasing the risk of future glacier calving.
基金funded by the National Natural Science Foundation of China(No.42072149).
文摘Transfer zones are structural areas of faults interactions where fault motion or displacement can be transferred from one fault to another, regional strain maintains laterally constant. Transfer zones are widely developed in rift basins and have significance on hydrocarbon accumulation. In this review article, we attempt to summarize recent advances on the types, distance-displacement curves, evolutionary stages and controlling factors of transfer zones in rift basins and their effects on sedimentary systems, reservoir properties, trap formation and hydrocarbon migration. The formation of transfer zones is genetically related to the segmented growth of normal faults. Depending on the degree of interaction between these normal faults, transfer zones in rift basins could be divided into two types: soft-linked and hard-linked, which are further subdivided into transfer slope, oblique anticline, horst and transfer fault based on the combination patterns of normal faults. In general, the development of transfer zones experiences several stages including isolated normal faulting, transfer slope forming, complicating and breaking. During the interaction and growth of segmented normal faults, stress-strain and spatial array of faults, pre-existing basement structures, and mechanical conditions of rocks have a great influence on the location and development processes of transfer zones. A transfer zone is commonly considered as a pathway for conveying sediments from provenance to basin, and it hence exerts an essential control on the distribution of sandbodies. In addition, transfer zone is the area where stresses are concentrated, which facilitates the formation of various types of structural traps, and it is also a favorable conduit for hydrocarbon migration. Consequently, there exists great hydrocarbon potentials in transfer zones to which more attention should be given.