Developing high-efficiency and stable inverted CsPbI2Br perovskite solar cells is vitally urgent for their unique advantages of removing adverse dopants and compatible process with tandem cells in comparison with the ...Developing high-efficiency and stable inverted CsPbI2Br perovskite solar cells is vitally urgent for their unique advantages of removing adverse dopants and compatible process with tandem cells in comparison with the regular.However,relatively low opening circuit voltage(Voc)and limited moisture stability have lagged their progress far from the regular.Here,we propose an effective surface treatment strategy with high-temperature FABr treatment to address these issues.The induced ions exchange can not only adjust energy level,but also gift effective passivation.Meanwhile,the gradient distribution of FA+can accelerate the carriers transport to further suppress bulk recombination.Besides,the Br-rich surface and FA+substitution can isolate moisture erosions.As a result,the optimized devices show champion efficiency of 15.92%with Voc of 1.223 V.In addition,the tolerance of humidity and operation get significant promotion:maintaining 91.7%efficiency after aged at RH 20%ambient condition for 1300 h and 81.8%via maximum power point tracking at 45°C for 500 h in N2.Furthermore,the unpackaged devices realize the rare reported air operational stability and,respectively,remain almost efficiency(98.9%)after operated under RH 35%for 600 min and 91.2%under RH 50%for 300 min.展开更多
An inverted structure of polymer solar cells based on Poly（3-hexylthiophene）（P3HT）：[6-6] Phenyl-（6） butyric acid methyl ester （PCBM） with using thin films of TiO2 nanotubes and nanoparticles as an efficient c...An inverted structure of polymer solar cells based on Poly（3-hexylthiophene）（P3HT）：[6-6] Phenyl-（6） butyric acid methyl ester （PCBM） with using thin films of TiO2 nanotubes and nanoparticles as an efficient cathode buffer layer is developed. A total of three cells employing TiO2 thin films with different thickness values are fabricated. Two cells use layers of TiO2 nanotubes prepared via self-organized electrochemical-anodizing leading to thickness values of 203 and 423.7 nm, while the other cell uses only a simple sol-gel synthesized TiO2 thin film of nanoparticles with a thickness of 100 nm as electron transport layer. Experimental results demonstrate that TiO2 nanotubes with these thickness values are inefficient as the power conversion efficiency of the cell using 100-nm TiO2 thin film is 1.55%, which is more than the best power conversion efficiency of other cells. This can be a result of the weakness of the electrochemical anodizing method to grow nanotubes with lower thickness values. In fact as the TiO2 nanotubes grow in length the series resistance （Rs） between the active polymer layer and electron transport layer increases, meanwhile the fill factor of cells falls dramatically which finally downgrades the power conversion efficiency of the cells as the fill factor falls.展开更多
Objective\ To understand the transcription of BamHI L DNA fragment from genome of strong virulent GA strain of Marek′s disease herpesvirus (MDV) in lymphoblastoid tumor tissue induced by oncogenic strain Beijing 1 ...Objective\ To understand the transcription of BamHI L DNA fragment from genome of strong virulent GA strain of Marek′s disease herpesvirus (MDV) in lymphoblastoid tumor tissue induced by oncogenic strain Beijing 1 (a specific local strain in China) of MDV. Methods\ Two oligonucleotide primers were synthesized according to the reported sequence of \%meq\% gene an ideal oncogenic candidate and our previously determined sequence of BamHI L fragment of Marek′s disease herpesvirus (MDV), respectively. Reverse transcriptase PCR(RT PCR) assay was performed by using these primers and the mRNA as a template which was isolated from visceral lymphoblastoid tumors obtained from chickens artificially infected with strain Beijing 1 of oncogenic MDV. Southern blot molecular hybridization was further carried out to detect the product of RT PCR with digoxigenin labeled nucleotide probe from BamHI I2 and L fragment in the gene library of MDV strain GA, respectively. Results\ Two probes could simultaneously hybridize this cDNA amplified by RT PCR with a length of about 730 bp. Conclusion\ It is suggested that \%meq\% transcription could extend from the right hand end of BamHI I2 to the adjacent BamHI L, and the BamHI L region was likely to be transcribed in MDV induced lymphoblastoid tumors.展开更多
We investigated the effects of using different thicknesses of pure and vanadium-doped thin films of TiO2 as the electron transport layer in the inverted configuration of organic photovoltaic cells based on poly（3-hex...We investigated the effects of using different thicknesses of pure and vanadium-doped thin films of TiO2 as the electron transport layer in the inverted configuration of organic photovoltaic cells based on poly（3-hexylthiophene） P3HT：[6-6] phenyl-（6） butyric acid methyl ester（PCBM）. 1% vanadium-doped TiO2nanoparticles were synthesized via the solvothermal method. Crystalline structure, morphology, and optical properties of pure and vanadium-doped TiO2 thin films were studied by different techniques such as x-ray diffraction, scanning electron microscopy, transmittance electron microscopy, and UV–visible transmission spectrum. The doctor blade method which is compatible with roll-2-roll printing was used for deposition of pure and vanadium-doped TiO2 thin films with thicknesses of 30 nm and 60 nm. The final results revealed that the best thickness of TiO2 thin films for our fabricated cells was 30 nm. The cell with vanadium-doped TiO2 thin film showed slightly higher power conversion efficiency and great Jsc of 10.7 mA/cm^2 compared with its pure counterpart. In the cells using 60 nm pure and vanadium-doped TiO2 layers, the cell using the doped layer showed much higher efficiency. It is remarkable that the external quantum efficiency of vanadium-doped TiO2 thin film was better in all wavelengths.展开更多
Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)(PEDOT:PSS)has been widely adopted as hole transport material(HTM)in inverted perovskite solar cells(PSCs),due to high optical transparency,good mechanical flexib...Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)(PEDOT:PSS)has been widely adopted as hole transport material(HTM)in inverted perovskite solar cells(PSCs),due to high optical transparency,good mechanical flexibility,and high thermal stability;however,its acidity and hygroscopicity inevitably hamper the long-term stability of the PSCs and its energy level does not match well with perovskite materials with a relatively low open-circuit voltage.In this work,p-type delafossite CuCrO_(2)nanoparticles synthesized through hydrothermal method was employed as an alternative HTM for triple cation perovskite[(FAPbI_(3))_(0.87)(MAPbBr_(3))_(0.13)]_(0.92)(CsPbI_(3))_(0.08)(possessing better photovoltaic performance and stability than conventional CH3NH3PbI3)based inverted PSCs.The average open-circuit voltage of PSCs increases from 908 mV of the devices with PEDOT:PSS HTM to 1020 m V of the devices with CuCrO_(2)HTM.Ultraviolet photoemission spectroscopy demonstrates the energy band alignment between CuCrO_(2)and perovskite is better than that between PEDOT:PSS and perovskite,the electrochemical impedance spectroscopy indicates CuCrO_(2)-based PSCs exhibit larger recombination resistance and longer charge carrier lifetime than PEDOT:PSS-based PSCs,which contributes to the high VOCof CuCrO_(2)HTM-based PSCs.展开更多
基金The authors thank the financial supports by the National Natural Science Foundation of China(61974150 and 51773213)the Zhejiang Provincial Natural Science Foundation of China(LQ19E030008)+1 种基金the Key Research Program of Frontier Sciences,CAS(QYZDB-SSW-JSC047),the Zhejiang Province Science and Technology Plan(2018C01047)the Fundamental Research Funds for the Central Universities and the National Youth Top-notch Talent Support Program.
文摘Developing high-efficiency and stable inverted CsPbI2Br perovskite solar cells is vitally urgent for their unique advantages of removing adverse dopants and compatible process with tandem cells in comparison with the regular.However,relatively low opening circuit voltage(Voc)and limited moisture stability have lagged their progress far from the regular.Here,we propose an effective surface treatment strategy with high-temperature FABr treatment to address these issues.The induced ions exchange can not only adjust energy level,but also gift effective passivation.Meanwhile,the gradient distribution of FA+can accelerate the carriers transport to further suppress bulk recombination.Besides,the Br-rich surface and FA+substitution can isolate moisture erosions.As a result,the optimized devices show champion efficiency of 15.92%with Voc of 1.223 V.In addition,the tolerance of humidity and operation get significant promotion:maintaining 91.7%efficiency after aged at RH 20%ambient condition for 1300 h and 81.8%via maximum power point tracking at 45°C for 500 h in N2.Furthermore,the unpackaged devices realize the rare reported air operational stability and,respectively,remain almost efficiency(98.9%)after operated under RH 35%for 600 min and 91.2%under RH 50%for 300 min.
文摘An inverted structure of polymer solar cells based on Poly（3-hexylthiophene）（P3HT）：[6-6] Phenyl-（6） butyric acid methyl ester （PCBM） with using thin films of TiO2 nanotubes and nanoparticles as an efficient cathode buffer layer is developed. A total of three cells employing TiO2 thin films with different thickness values are fabricated. Two cells use layers of TiO2 nanotubes prepared via self-organized electrochemical-anodizing leading to thickness values of 203 and 423.7 nm, while the other cell uses only a simple sol-gel synthesized TiO2 thin film of nanoparticles with a thickness of 100 nm as electron transport layer. Experimental results demonstrate that TiO2 nanotubes with these thickness values are inefficient as the power conversion efficiency of the cell using 100-nm TiO2 thin film is 1.55%, which is more than the best power conversion efficiency of other cells. This can be a result of the weakness of the electrochemical anodizing method to grow nanotubes with lower thickness values. In fact as the TiO2 nanotubes grow in length the series resistance （Rs） between the active polymer layer and electron transport layer increases, meanwhile the fill factor of cells falls dramatically which finally downgrades the power conversion efficiency of the cells as the fill factor falls.
文摘Objective\ To understand the transcription of BamHI L DNA fragment from genome of strong virulent GA strain of Marek′s disease herpesvirus (MDV) in lymphoblastoid tumor tissue induced by oncogenic strain Beijing 1 (a specific local strain in China) of MDV. Methods\ Two oligonucleotide primers were synthesized according to the reported sequence of \%meq\% gene an ideal oncogenic candidate and our previously determined sequence of BamHI L fragment of Marek′s disease herpesvirus (MDV), respectively. Reverse transcriptase PCR(RT PCR) assay was performed by using these primers and the mRNA as a template which was isolated from visceral lymphoblastoid tumors obtained from chickens artificially infected with strain Beijing 1 of oncogenic MDV. Southern blot molecular hybridization was further carried out to detect the product of RT PCR with digoxigenin labeled nucleotide probe from BamHI I2 and L fragment in the gene library of MDV strain GA, respectively. Results\ Two probes could simultaneously hybridize this cDNA amplified by RT PCR with a length of about 730 bp. Conclusion\ It is suggested that \%meq\% transcription could extend from the right hand end of BamHI I2 to the adjacent BamHI L, and the BamHI L region was likely to be transcribed in MDV induced lymphoblastoid tumors.
文摘We investigated the effects of using different thicknesses of pure and vanadium-doped thin films of TiO2 as the electron transport layer in the inverted configuration of organic photovoltaic cells based on poly（3-hexylthiophene） P3HT：[6-6] phenyl-（6） butyric acid methyl ester（PCBM）. 1% vanadium-doped TiO2nanoparticles were synthesized via the solvothermal method. Crystalline structure, morphology, and optical properties of pure and vanadium-doped TiO2 thin films were studied by different techniques such as x-ray diffraction, scanning electron microscopy, transmittance electron microscopy, and UV–visible transmission spectrum. The doctor blade method which is compatible with roll-2-roll printing was used for deposition of pure and vanadium-doped TiO2 thin films with thicknesses of 30 nm and 60 nm. The final results revealed that the best thickness of TiO2 thin films for our fabricated cells was 30 nm. The cell with vanadium-doped TiO2 thin film showed slightly higher power conversion efficiency and great Jsc of 10.7 mA/cm^2 compared with its pure counterpart. In the cells using 60 nm pure and vanadium-doped TiO2 layers, the cell using the doped layer showed much higher efficiency. It is remarkable that the external quantum efficiency of vanadium-doped TiO2 thin film was better in all wavelengths.
基金jointly supported by the National Natural Science Foundation of China(No.62075223 and No.11674324)CAS Pioneer Hundred Talents Program of Chinese Academy of Sciences+5 种基金CAS-JSPS Joint Research Projects(GJHZ1891)Director Fund of Advanced Laser Technology Laboratory of Anhui Province(AHL2020ZR02)Key Lab of Photovoltaic and Energy Conservation Materials of Chinese Academy of Sciences(PECL2019QN005 and PECL2018QN001)the Natural Science Foundation of Top Talent of Shenzhen Technology University(No.2020101)Natural Science Research Project of Higher School of Anhui Province(KJ2020A0477)Initial Scientific Research Fund of Anhui Jianzhu University(No.2018QD60)。
文摘Poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate)(PEDOT:PSS)has been widely adopted as hole transport material(HTM)in inverted perovskite solar cells(PSCs),due to high optical transparency,good mechanical flexibility,and high thermal stability;however,its acidity and hygroscopicity inevitably hamper the long-term stability of the PSCs and its energy level does not match well with perovskite materials with a relatively low open-circuit voltage.In this work,p-type delafossite CuCrO_(2)nanoparticles synthesized through hydrothermal method was employed as an alternative HTM for triple cation perovskite[(FAPbI_(3))_(0.87)(MAPbBr_(3))_(0.13)]_(0.92)(CsPbI_(3))_(0.08)(possessing better photovoltaic performance and stability than conventional CH3NH3PbI3)based inverted PSCs.The average open-circuit voltage of PSCs increases from 908 mV of the devices with PEDOT:PSS HTM to 1020 m V of the devices with CuCrO_(2)HTM.Ultraviolet photoemission spectroscopy demonstrates the energy band alignment between CuCrO_(2)and perovskite is better than that between PEDOT:PSS and perovskite,the electrochemical impedance spectroscopy indicates CuCrO_(2)-based PSCs exhibit larger recombination resistance and longer charge carrier lifetime than PEDOT:PSS-based PSCs,which contributes to the high VOCof CuCrO_(2)HTM-based PSCs.
