Direct Determination of Potassium-Sodium Activity Ratio in Soil Suspension with Two Ion-Selective Electrodes

A K+-selective electrode and a Na+-selective electrode were used to construct a measuring cell without liquid-junction for the determination of the ion activity ratio of K+ to Na+ in soil suspensions. The measured cell potential was not affected by the total electrolyte concentration when the total cation concentration was 10-1-10-3 mol L-1 and the concentration ratio CK+ / CNa+. was 10:1 to 1:50. When the concentration ratios were equal to 1and the total electrolyte concentrations were 10-2 and 10-3 mol L-1, the ion activity ratio measurement would not be affected by pH in the pH range of 3.5 to 11.5 and 4.4 to 11 respectively. Ions other than H+ have no remarkable influence on the measurement. The ion activity ratio of K+ to Na+ measured directly in soil suspension agree well with those in centrifuged supernant solution. The relative deviation was within 4%. From the measured ion activity ratio, the difference of the bonding energies of K+ and Na+ ions was calculated.

Preparation of CeO_2 Nanoparticles and Its Application to Ion-selective Electrodes Based on Acetyl Cellulose

CeO2 nanoparticles with an average diameter of about 30 nm were prepared by sol-gel method at lower temperature. The gel, transformed from the aqueous solution of metal nitrate and citric acid, can be combusted completely at lower temperature. The redox behavior and the crystallization process of the dried gel were studied by thermogravimetric analysis and infrared spectroscopy. The synthesized powders were characterized by X-ray powder diffraction and transmission electron microscopy. In addition, rare earth elements ion-selective electrodes based on acetyl cellulose were prepared using ultra fine cerium oxide powders.

Construction and Application of a PVC Membrane Enoxacin Ion-selective Electrode Based on a Needle-shaped Inner Reference Electrode

A PVC membrane enoxacin ion-selective electrode based on a needle-shaped inner reference electrode was prepared. A Ag/AgCl wire was used as the substrate of this electrode. It was previously coated with a thin sheet of urea-formaldehyde resin containing Cl - ions to form a needle-shaped inner reference electrode, then the inner reference electrode was coated with a thin sheet of a PVC membrane containing an enoxacin tetraphenylborate ion-pair complex. The influences of various ion-pair complexes, concentrations of the active components in the membrane and the plasticizers on the performance of the electrode were studied by orthogonal design. The linear response range of the electrode was 7.9×10 -5 -1.0×10 -2 mol/L. The detection limit was 2.0×10 -5 mol/L. The slope was 30.4 mV/decade(25 ℃). The electrode can be used for the potentiometric determination of enoxacin tablets directly. The average recovery was 100.4%, and the RSD was 0.9%. The results agreed with those determined by the method in Chinese Pharmacopoeia.

Potentiometric Urea Biosensor Based on Ion-Selective Electrode by Different Immobilization Procedures

Enzyme was immobilized on an ammonium ion-selective electrode by different methods.An ion-selective electrode is not completely ion-specific,and interfering ions react with the ion-selective electrode membrane,altering the measured potential.Therefore,the characteristics of the effect of other ions on ammonium ion-selective electrode-based urea biosensors are considered.Based on the experimental results,the urea biosensor based on entrapment had a high response voltage of around 189 mV and fast response time of around 16 sec.Moreover,selectivity of the urea biosensor in different interfering ions was considered to elucidate the characteristics of ammonium ion-selective electrode-based biosensors.

Stabilization of formamidinium lead iodide perovskite precursor solution for blade-coating efficient carbon electrode perovskite solar cells

Formamidinium lead triiodide(FAPbI_(3))is a research hotspot in perovskite photovoltaics due to its broad light absorption and proper thermal stability.However,quite a few researches focused on the stability of the FAPbI_(3) perovskite precursor solutions.Besides,the most efficient FAPbI_(3) layers are prepared by the spin-coating method,which is limited to the size of the device.Herein,the stability of FAPbI_(3) perovskite solution with methylammonium chloride(MACl)or cesium chloride(CsCl)additive is studied for preparing perovskite film through an upscalable blade-coating method.Each additive works well for achieving a high-quality FAPbI_(3) film,resulting in efficient carbon electrode perovskite solar cells(pero-SCs)in the ambient condition.However,the perovskite solution with MACl additive shows poor aging stability that noα-FAPbI_(3) phase is observed when the solution is aged over one week.While the perovskite solution with CsCl additive shows promising aging stability that it still forms high-quality pureα-FAPbI_(3) perovskite film even the solution is aged over one month.During the solution aging process,the MACl could be decomposed into methylamine which will form some unfavored intermediated phase inducingδ-phase FAPbI_(3).Whereas,replacing MACl with CsCl could effectively solve this issue.Our founding shows that there is a great need to develop a non-MACl FAPbI_(3) perovskite precursor solution for cost-effective preparation of pero-SCs.

STUDY OF CALCIUM ION-SELECTIVE ELECTRODE BASED ON A NEW NEUTRAL CARRIER

A calcium ion-setective eletrode based on a new neutral carrier was studied.The electrode gives a Nernstian response in the rang 5.9-1 Pa and the response is stable in a wide pH range.Logarithms of setectivity coefficents are -2.3 Li(+),-3.5 Na(+),-4.0 K(+),-3.7NH_4(+),-4.5 Mg(2+) and -4.4Zn(2+).

Studies of Adsorption of Cadmium Ions by Biowaste Adsorbent from Aqueous Solutions with Ion-Selective Electrodes and ICP-OES

Using environment-friendly and low-cost biowaste adsorbents as toxic metal ion removal substrates from aqueous solutions has a great economic advantage. This work evaluated pumpkin and potato peel biowastes for the adsorption of cadmium ions. The biowastes were treated with acid or base. Batch experiments were carried out by introducing a known concentration of metal ion solution into the biowaste sorbent at various pH levels. The pH and metal ion concentration was monitored with pH and cadmium ion-selective electrode continuously for two hours, and the final concentration for the metal ion after 24 hours was measured with the cadmium electrode and then confirmed with ICP-OES. L-type isotherms were obtained that fit to Freundlich model. Adsorption isotherms showed chemical adsorption and the kinetics following the second order model. Equilibrium adsorption capacity is higher than 29 mg/g at pH 5.6 when the initial concentration is 220 ppm. Dynamic cadmium adsorption capacity is 17 mg/g from aqueous solution when the feed solution is 220 ppm with pumpkin peel biowaste sorbent. The biowaste materials can be regenerated with acid washing.

Preparation of New Uric Acid Sensors Based on Iodide Selective Electrode

An electrode for uric acid has been prepared by using an iodide selective electrode with the uricase enzyme. The iodide selective electrode used was prepared from 10% TDMAI and PVC according to our previous study. The enzyme was immobilized on the iodide electrode by holding it at pH 7 phosphate buffer for 20 min at room temperature. The H2O2 formed from the reaction of uric acid was determined from the decrease of iodide concentration that was present in the reaction cell. The potential change was linear in the 2 × 10-5 to 2 × 10-4 M uric acid concentration (3 - 34 mg uric acid/100ml blood) range. Uric acid contents of some blood samples were determined with the new electrode and consistency was obtained with a colorimetric method. The effects of pH, iodide concentration, the amount of enzyme immobilized and the operating temperature were studied. No interference of ascorbic acid, glucose and urea was observed.

The Determination of Iodide Based on a Flow-injection Coupling Irreversible Biamperometry

A novel flow-injection irreversible biamperometric method is described for the direct determination of iodide. The method is based on electrochemical oxidation of iodide at the gold electrode and the reduction of permanganate at the platinum electrode to form an irreversible biamperometric detection system. Under the applied potential difference of 0 V, in the 0.05 mol/L sulfuric acid, iodidecan be determined over the range 4.00×10^-7-1.00×10^-5 mol/L with a sampling frequency of 120 samples per hour. The detection limit for I- is 3.0×10^-7 mol/L and the RSD for 40 replicate determinations of 4.0×10^-5 mol/L potassium iodide is 1.68%. The new method was applied to the analysis of iodide in table salt with satisfactory results.

A comparative study of four 20-membered N_2S_4-crown ethers as ionophores for polymeric membrane silver selective electrodes

Four 20-membered N_2S_4-monoazathiacrown ethers have been synthesized and explored as neutral ionophores for Ag^+-selective electrodes.Potentiometric responses reveal that the flexibility of the ligands has great effect on the selectivity and sensitivity to Ag^+ ions.The electrode based on ionophore 9,10,20,25-tetrahydro-5H,12H-tribenzo[b,n,r][1,7,10,16,4,13]tetrathiadiaza cycloicosine 6,13-(7H,14H)-dione(C) with 2-nitrophenyl octyl ether(o-NPOE) as solvent in a poly(vinyl chloride)(PVC) membrane matrix sho...

Review on transition metal compounds based counter electrode for dye-sensitized solar cells

Commercial application of the dye-sensitized solar cells（DSCs） depends on great improvement of the power conversion efficiency and reduction of the fabrication cost. Generally, developing low cost counter electrode catalysts to replace the expensive Pt counter electrode is a feasible path to reduce the production cost of DSCs. In this review article, we summarize the recent progress on the transition metal compound based counter electrode catalysts containing carbides, nitrides, oxides, sulfides, phosphide, selenides, borides, silicide, and telluride toward the regeneration of the traditional iodide redox couple.Moreover, the benefits and drawbacks of each kind of CE catalyst are discussed and the research directions to design new counter electrode catalysts in future research are also proposed.

Ion Selective Electrode Array Analysis Using Variable Step-Size Generalized Simulated Annealing

A global optimum location algorithm called Variable Step-Size Generalized Simulated Annealing(VSGSA) was applied to treating the data obtained by using an array of ion-electrodes in solutions containing mixtures of Na+, K+, Ca2+. Unlike traditional optimization algorithms such as simplex procedure, VSGSA can be used to determine the model parameters without any priori information about the analytical system under investigation and overcome the disadvantage of simplex method which might converge to local extrema depending on the starting positions. The algorithm was applied to po-tentiometric determination of ions in mixture solutions.

Binding mechanism of halide ions to bovine serum albumin and hemoglobin: investigated by ion selective-electrode

The binding mechanism of the interactions of halide ions (F–, Br– and I–) with bovine serum albumin (BSA) and hemoglobin (Hb) were studied at different temperatures, by using ion-selective electrodes. The experimental data were treated according to Klotz equation, and the number of binding sites and the binding constants were determined. The results show that the binding sites of F– on protein molecules are more than those of Br– and I–. Additionally, the number of the binding sites for halide ions on protein molecules increases with increasing temperature. This study also indicates that the binding constants for the interactions of halide ions with proteins gradually decrease as the size of halide ions and temperature increases. These behaviors were reasonably interpreted with the structural and thermodynamic factors. The thermodynamic functions at different temperatures were calculated with thermodynamic equations, and the enthalpy change for the interactions were also determined by isothermal titration calorimetry (ITC) at 298.15 K, which indicate that the interactions of halide ions with proteins are mainly electrostatic interaction.

Metal sulfide quantum dots-aggregated PAMAM dendrimer for cadmium ion-selective electrode-based immunoassay of alpha-fetoprotein

An ion-selective electrode(ISE)-based immunoassay has been innovatively designed for the sensitive detection of liver cancer biomarker(alpha-fetoprotein,AFP),using metal sulfide quantum dot(QD)-based nano labels.Cd S QDs-aggregated PAMAM dendrimer(QD-DE)was first synthesized and functionalized with polyclonal rabbit anti-human AFP antibodies.Thereafter,a sandwich immunoreaction was implemented on monoclonal mouse anti-human AFP antibody-coated microplate by using antibody-functionalized QD-DE as the secondary antibody.Accompanying the immunocomplex,subsequent potentiometric detection of cadmium ion dissolved from the QD-DE under acidic condition was conducted on a portable cadmium ion-selective electrode(Cd-ISE).Results revealed that the electrode potential of the Cd-ISE increased with the increment of AFP concentration from 0.1 to 100 ng m L^(-1)at a detection limit(LOD)of 68 pg m L^(-1).The relative standard deviations(RSD)were below9.09%and 10.54%for the intra-and inter-assay,respectively.Additionally,six human serum specimens were determined on CdISE-based immunosensor by using commercial human AFP ELISA kit as the reference,and gave good relationship between two methods.Importantly,Cd-ISE-based immunoassay offers the promise for simple and cost-effective screening of disease-related biomarkers.

Iodide-selective polymeric membrane electrode based on copper(Ⅱ) bis(N-2-bromophenylsalicyldenaminato) complex

A PVC membrane electrode based on copper（II） bis（N-2-bromophenylsalicyldenaminato） as ionophor was prepared. The ion selective electrode was tested by inorganic anions and showed a good selectivity for iodide ion. This sensor exhibited Nernstian behavior with a slope of -57.8 mV per decade at 25℃. The proposed electrode showed a linear range from 1.0 × 10 ^-5 to 1.0 × 10 ^-1 mol/L with a detection limit of 5.0 × 10 ^-6 mol/L. The electrode response was independent of pH in the range of 3.0- 10.0. The proposed sensor was applied to determine the iodide in water and antiseptic samples.

A novel Ce(Ⅳ)ion-selective polyvinyl chloride membrane electrode based on HDEHP and HEH/EHP

A novel Ce（Ⅳ） ion-selective polyvinyl chloride（PVC） membrane electrode based on HDEHP and HEH/EHP as ionophore was successfully prepared. The factors affecting the response of Ce（Ⅳ） ion were investigated, such as membrane composition, internal solution, concentration of SO_4^（2–）, and acidity in test solution. The best performance was obtained using the membrane with PVC：DBP：HDEHP：HEH/EHP：OA mass ratio of 75：175：5：5：5. The proposed electrode exhibited a Nernstian slope of 30.44 mV/decade for Ce（Ⅳ） ion over a linear concentration range of 1×10^（–5）–1×10^（–1） mol/L with the detection limit of 9.0×10^（-6） mol/L. The electrode showed stable response within the SO_4^（2–） concentration range of 0.1–1 mol/L and the acidity range of 0.25–1.2 mol/L H＋. The proposed electrode showed high selectivity for Ce（Ⅳ） over a wide variety of interfering ions and a fast response time. It was used as an indicator in the potentiometric titration of Ce（Ⅳ） solution with H_2O_2 solution, and could also be used for the determination of Ce（Ⅳ） in real Ce（Ⅳ）-containing aqueous samples.

Synthesis of a Tweezer-like Bis(phenylthiapropoxy)calix[4]-arene as a Cation/π Enhanced Sensor for Ion-Selective Electrodes

Two novel 25,27-dihydroxy-26,28-bis(3-phenylthiapropoxy)-calixarene (3) and 25,27-dihydroxy-26,28-bis(3-phenylthia-propoxy)-5,11,17,23-tetra-tert-butylcalixarene (4) were synthesized for the evaluation of their ion-selectivity in ion-selective electrodes (ISEs). ISEs based on 3 and 4 as neutral ionophores were prepared, and their selectivity coefficients for Ag + (lg K pot Ag,M) were investigated against other alkali metal, alkaline-earth metal, aluminum, thallium (I), lead and some transition metal ions using the separate solution method (SSM). These ISEs showed excellent Ag + selectivity over most of the interfering cations examined, except for Hg 2+ and Fe 2+ having relative smaller interference (lg K pot Ag,M≤-2.1).

Comparison of three measurement models of soil nitrate-nitrogen based on ion-selective electrodes

Ion-selective electrode(ISE)is a quick and low-cost method of soil nitrate nitrogen(N)detection.The measurement models of soil nitrate-N based on ISEs includes the linear regression model,multiple linear regression model and BP neural network model,and so on.Three models were analyzed in theory,measurement experiments of validation samples and soil nitrate-N concentrations were carried out in this study,and the measurement accuracies of the three models were compared.The results showed that,in the measurement experiments of validation samples and soil nitrate-N concentrations,BP neural network model had the highest accuracy(the average relative errors between results of the BP neural network model and the reference values were 5.07%and 8.81%,respectively)among the three models,multiple linear regression model had the second highest accuracy(the average relative errors between results of the multiple linear regression model and the reference values were 7.70%and 10.51%,respectively),linear regression model couldn’t exclude the interference of chloride ions so that it had the lowest accuracy(the average relative errors between results of the linear regression model and the reference values were 11.16%and 12.28%,respectively)among the three models.The BP neural network model can effectively restrain the interference of chloride ions,and it has a high accuracy for the measurement of soil nitrate-N concentration,so that the BP neural network model can be used to measure soil nitrate-N concentration accurately.

Coulometric Response of H-Selective Solid-Contact Ion-Selective Electrodes and Its Application in Flexible Sensors+

The analytical performance of H+-selective solid-contact ion-selective electrodes(SCISEs)based on solid contact polyaniline doped with chloride(PANI(Cl))and poly(3,4-ethylenedioxythiophene)doped with poly(styrene sulfonate)(PEDOT(PSS))was characterized by a developed coulometric signal transduction method.PEDOT(PSS)solid contact is covered by PVC based H+-selective membrane.The obtained coulometric signal demonstrates that the cumulated charge can be amplified by increasing the capacitance of solid contact.SCISEs covered with spin-coated membrane behave faster amperometric response than electrodes with drop-cast mem-brane.In contrast to earlier works,the amperometric response and impedance spectrum demonstrates H+transfer through SCISEs is independent from the thickness of membrane.The exceptional behavior of PANI(Cl)H+-SCISEs shows that the capacitance estimated from impedance spectrum at low frequency 10 mHz and coulometric signal of PANI(Cl)based SCISEs is influenced by the applied po-tentials,whereas PEDOT(PSS)solid contact is independent from the chosen applied potentials.Furthermore,preliminary investiga-tions of coulometric signal transduction on flexible pH sensor implies its potential applications in wearable sensors for sweat ion concentration detection.

New All-solid-state Carbonate Ion-selective Electrode with Ag2CO3-BaCO3 as Sensitive Films

A new all-solid-state carbonate ion-selective electrode was fabricated via electrochemical and ion-exchange reactions with Ag nanoparticles and Ag2CO3-BaCO3 as ion-to-electron transducer and ion-selective layer, respectively. This paper presented the detailed procedures of the construction of the electrode, the applications of the electrode in various experiments, and the corresponding chemical reaction principles involved. The fabricated electrode was characterized by means of scanning electron microscopy（SEM）, energy dispersive spectrometer（EDS）, and electrochemical analyses. The electrode exhibited stable linear responses to carbonate anions（10-5--10-1 mol/L） with average Slope of the curve being -26.56 mV per decade, and showed negligible responses to NO3, SO2-, and Sal- anions. The electrode was further used to measure the concentration of carbonate anions in boiler water. The measured concentration was lower than that determined via titration. Overall, the electrode exhibited the advantages of miniaturized size, robust construction, and compatibility with other equipment and thus could be ideally integrated into various sensor platforms to collect chemical data from industrial heat exchangers.