Determination of petroleum sulfonates in crude oil by column-switching anion-exchange chromatography

A column-switching anion-exchange chromatography method was described for the separation and determination of petroleum monosulfonates （PMS） and petroleum disulfonates （PDS） in crude oil that was simply diluted with the dichloromethane/methanol （60/40）. The high performance liquid chromatography （HPLC） system consisted of a clean-up column and an analytical column, which were connected with two six-port switching valves. Detection of petroleum sulfonates was available and repeatable. This method has been successfully applied to determine PMS and PDS in crude oil samples from Shengli oil field.

Denatured Thermodynamics of Proteins in Weak Cation-exchange Chromatography

The thermostability of some proteins in weak cation-exchange chromatography was investigated at 20-80 ℃. The results show that there is a fixed thermal denaturation transition temperature for each protein. The appearance of the thermal transition temperature indicates that the conformations of the proteins are destroyed seriously. The thermal behavior of the proteins in weak cation-exchange and hydrophobic interaction chromatographies were compared in a wide temperature range. It was found that the proteins have a higher thermostability in a weak cation-exchange chromatography system. The thermodynamic parameters(Δ H 0, Δ S 0) of those proteins were determined by means of Vant Hoff relationship(ln k -1/ T ). According to standard entropy change(Δ S 0), the conformational change of the proteins was judged in the chromatographic process. The linear relationships between Δ H 0 and Δ S 0 can be used to evaluate 'compensation temperature'( β ) at the protein denaturation and identify the identity of the protein retention mechanism in weak cation-exchange chromatography.

Copper modified platinum electrode for amperometric detection of spectinomycin sulfate by anion-exchange chromatography

A La^3＋-Cu/Pt modified electrode was fabricated by electrodepositing process in CuS04 solution by adding a small amount of lanthium compound, and it was employed for direct current （DC） amperometric detection of spectinomycin by anion-exchange chromatography. Without derivatization, this method can simultaneously determine the main component and impurities in spectinomycin pharmaceutical raw material. Ease of preparation, being applied in DC detection mode and good catalytic stability confirmed the interests of this modified electrode as amperometric sensor for the determination of spectinomycin.

Impact of Hydrogen Ion Concentration on Amino Acids Composition of Macadamia Protein: Approached Using Cation-Exchange Chromatography

In the present context, the objective of this study was to synthesize and analyze the content of AA of macadamia protein and the impact of hydrogen ion concentration (pH) on AA composition. The determination of AA mainly by cation-exchange chromatography was also investigated. Reproducible and reliable techniques for quantification and identification of AA usually require derivatization. However, techniques such as AA analyzer are composed of cation-exchange chromatography and other components can sideline the derivatization with significant accuracy. The present analysis revealed a higher concentration of essential amino acids especially acidic AA, Glu and Asp and basic AA, Arg than other AA in macadamia protein. The study constitutes first report of use of bubble chart for evaluation of AA and explaination of AAS. The results may elaborate that the degradation of AA of macadamia protein for extraction of pH 11 is caused by the impact of pH. Moreover, the nutritional values of AA present in macadamia protein could change for the better by adjusting pH of extraction.

Study on the Separation of Co^(2+) from Zn^(2+) , Cd^(2+) by Anion-exchange Chromatography

The separation of Co 2+ from Zn 2+ , Cd 2+ by anion exchange chromatography was discussed. The chromatographic column containing anion resin 201×7 which was saturated with a solution of ammonium chloride. The effects of the eluant acidity and eluant composition on the separation were investigated. The results indicate that this anion exchange chromatography is suitable to the separation of Co 2+ from Zn 2+ , Cd 2+ , and the condition of separation is simple and convenient. When the column is saturated with NH 4Cl solution (2.0 mol/L, pH=4.0), the separation can be completed effectively. Zn 2+ and Cd 2+ can also be separa ted when different eluants are used and the pure solution with high concentration of Zn 2+ , Cd 2+ respectively can be obtained ea sily.

Refolding of reduced/denatured bovine pancreatic insulin with ion-exchange chromatography coupled with MALDI-TOF MS

The refolding of the reduced/denatured insulin from bovine pancreas as the model protein was investigated with weak anion exchange chromatography （WAX） coupled with MALDI-TOF MS. The results indicated that the disulfide bonds almost cannot be formed correctly with the common mobile phase by WAX. However, with the urea gradient elution and in the presence of GSSG/ Cyst as the ratio 1：6 in the mobile phase employed, the disulfide exchange of reduced/denatured insulin can be accelerated resulting in forming the correct three disulfide bonds. The protein refolding efficiency of reduced/denatured insulin can be increased from 3 % to 34%. The effects of urea gradient and the oxidant and reductant groups, such as GSSG/GSH, Cyst, and GSSG/Cyst, on the forming the disulfide bonds of reduced/denatured insulin were investigated in detail. The results were further tested by the separation of the WAX fraction of reduced/denatured insulin with RPLC and MALDI-TOF MS.

Effects of ion-exchange on the pervaporation performance and microstructure of NaY zeolite membrane

Pervaporation performance of NaY zeolite membranes is improved by ion-exchange with di-valent nitrate salt.Different nitrate salts,including Co(NO_(3))_(2),Mg(NO_(3))_(2),Zn(NO_(3))_(2),Ca(NO_(3))_(2),Cu(NO_(3))_(2),KNO_(3),and AgNO_(3),have great effects on the channel structure and water affinity of the NaY zeolite membrane.When the concentration of nitrate salt,ion-exchange temperature and time are 0.1 mol·L^(-1),50℃and 2 h,the ion-exchange degree order of NaY zeolites is Ag^(+)>K^(+)>Ca^(2+)>Zn^(2+)>>Co^(2+)>Mg^(2+).Especially,Ag^(+)and K^(+)cation exchange degree of NaY zeolites are achieved to 96.54% and 82.77% in this work.BET surface,total pore capacity,pore size distribution and water contact angle of the ion-exchanged NaY zeolites are all disordered by mono-and di-valent cations.Di-valent nitrate salt is favor for increasing the dehydration performance of NaY zeolite membranes by ion-exchange.When the ion-exchange solution is Zn(NO_(3))_(2),the total flux variation and separation factor variation of the NaY membrane(M-5)are -45% and 230% for separation of 10%(mass)H_(2)O/EtOH mixture by pervaporation,and the ion-exchanged membranes showed good reproducibility.

Purification of a Choleragenoid by Ion-exchange Chromatography

Abstract: Choleragenoid was obtained in pure form by ultra-filteration and fractionation on cationexchange resin-phospho-cellulose column. The choleragenoid was highly pure as judged by the electrophoresis of isoelectric focusing,immunization and SDS-gel electrophoresis.The results of test are thesame as that of the standard choleragenoid.Keywoeds:choleragenoid; vibrio cholerae; purification;ion-exchange; chromatography

Cation-exchange high-performance liquid chromatography for variant hemoglobins and HbF/A2:What must hematopathologists know about methodology?

Cation-exchange high-performance liquid chromatography(CE-HPLC) is a widely used laboratory test to detect variant hemoglobins as well as quantify hemoglobins F and A2 for the diagnosis of thalassemia syndromes. It's versatility, speed, reproducibility and convenience have made CE-HPLC the method of choice to initially screen for hemoglobin disorders. Despite its popularity, several methodological aspects of the technology remain obscure to pathologists and this may have consequences in specific situations. This paper discusses the basic principles of the technique, the initial quality control steps and the interpretation of various controls and variables that are available on the instrument output. Subsequent sections are devoted to methodological considerations that arise during reporting of cases. For instance, common problems of misidentified peaks, totals crossing 100%, causes of total area being above or below acceptable limits and the importance of pre-integration region peaks are dealt with. Ultimately, CE-HPLC remains an investigation, the reporting of which combines in-depth knowledge of the biological basics with more than a working knowledge of the technological aspects of the technique.

Ion-Exchange Preparative Chromatography of Amino Acids

Ｉｏｎ－ＥｘｃｈａｎｇｅＰｒｅｐａｒａｔｉｖｅＣｈｒｏｍａｔｏｇｒａｐｈｙｏｆＡｍｉｎｏＡｃｉｄｓＪｉａｎｇａｎｇＬｕａｎｄＰｉｎｇｄｏｎｇＷｕ（ＣｈｅｍｉｃａｌＥｎｇｉｎｅｅｒｉｎｇＤｅｐａｒｔｍｅｎｔＺｈｅｊｉａｎｇＵｎｉｖｅｒｓｉｔｙ，Ｈａｎｇ...

Mathematical modeling of salt-gradient ion-exchange simulated moving bed chromatography for protein separations

The salt-gradient operation mode used in ion-exchange simulated moving bed chromatography (SMBC) can improve the efficiency of protein separations. A detailed model that takes into account any kind of adsorption/ion-exchange equilibrium, salt gradient, size exclusion, mass transfer resistance, and port periodic switching mechanism, was developed to simulate the complex dynamics. The model predictions were verified by the experimental data on upward and downward gradients for protein separations reported in the literature. All design and operating parameters (number, configuration, length and diameter of columns, particle size, switching period, flow rates of feed, raffinate, desorbent and extract, protein concentrations in feed, different salt concentrations in desorbent and feed) can be chosen correctly by numerical simulation. This model can facilitate the design, operation, optimization, control and scale-up of salt-gradient ion-exchange SMBC for protein separations.

Tribological Properties of Magnesium Ion-exchanged α-Zirconium Phosphate as a Solid Lubricant Additive in Lithium Grease

Magnesium ion-exchanged a-zirconium phosphates(Mg-α-ZrP) with particle sizes of 600 and 80 nm were prepared through the sealed ion-exchange and one-step hydrothermal synthesis methods, respectively. It was found that larger particles of Mg-α-ZrP had a higher load-carrying capacity than that of smaller particles, whereas smaller Mg-α-ZrP particles had better anti-wear properties than that of larger Mg-α-ZrP particles under mild loads. The correlation between the particle size of the sample and the surface roughness of the friction pair thus seems to be a key factor influencing the performance.

Preparation of Highly Dispersed Antimony-doped Tin Oxide Nano-powder via Ion-exchange Hydrolysis of SnCl_4 and SbCl_3 and Azeotropic Drying

Antimony-doped tin hydroxide colloid precipitates have been synthesized by hydrolysis of SnCl4 and SbCl3 using： （1） an ion-exchange hydrolysis to remove chlorine ions, and （2） isoamyl acetate as an azeotropic solvent to obviate water. The obtained dried powder is of high dispersivity without any need for further grinding. The size and dispersivity of the final particles are investigated with the aid of TG-DTA, BET, XRD and TEM. After having calcined, the antimony-doped tin oxide nanopowder possesses a tetragonal rutile structure with high dispersivity, uniform particles and low hard agglomeration.

Effective adsorptive denitrogenation from model fuels over yttrium ion-exchanged Y zeolite

The adsorption removal of indole and quinoline in octane with and without toluene over zeolites NaY and Yttrium Ion-exchanged Y(YY)using batch adsorption experiments was studied at 25℃and 0.1 MPa.YY was prepared by treating NaY with Y(NO3)3 solution twice via liquid ion-exchange method.NaY and YY were both characterized by XRD,SEM,N2 adsorption,XRF,NH3-TPD,and pyridine-FTIR techniques.Adsorption isotherms of indole,quinoline and toluene in octane were conducted at 25.0℃to explain the influence of toluene on nitrogen removal over NaY and YY.The partial destruct of the crystalline structure of NaY was observed after the introduction of yttrium ion,which led to an evident decline in BET surface area and pore volume of YY.Strong Br?nsted acidity and medium Lewis acidity were introduced by yttrium ion-exchange.Though the specific surface area and pore volume of YY were much lower than those of NaY,YY exhibited equivalent adsorption capacities for indole and quinoline as NaY in model fuels without toluene.In the presence of 20 vol%toluene,however,YY exhibited much higher adsorption capacities for indole and quinoline than NaY,especially in the case of quinoline.The improved toluene-tolerant of YY was ascribed to the strong acid–base interaction between YY and quinoline and the decreased adsorption strength between YY and toluene.

Study on Removal of Trace Lead from Nickel Sulphate Solution by Ion-exchange Method

By comparing the adsorption capacity of several kinds of resins, D363 resin is regarded as the most suitable one for removing lead from nickel sulphate electrolyte. The effects of pH, temperature and contact time on exchange adsorption during removing trace lead from industrial nickel sulphate solution with D363 large pore weak alkali anion exchange resin are discussed. Optimum conditions of adsorption of lead from nickel electrolyte by D363 resin are at room temperature, pH 1 2, contact time 30 min.

Redistributing Cu species in Cu-SSZ-13 zeolite as NH3-SCR catalyst via a simple ion-exchange

The nature and distribution of Cu species in Cu-SSZ-13 play a vital role in selective catalytic reduction of NO by NH3(NH3-SCR),but existing methods for adjusting the Cu distribution are complex and difficult to control.Herein,we report a simple and effective ion-exchange approach to regulate the Cu distribution in the one-pot synthesized Cu-SSZ-13 that possesses sufficient initial Cu species and thus provides a“natural environment”for adjusting Cu distribution precisely.By using this proposed strategy,a series of Cu-SSZ-13x zeolites with different Cu contents and distributions were obtained.It is shown that the dealumination of the as-synthesized Cu-SSZ-13 during the ion-exchange generates abundant vacant sites in the double six-membered-rings of the SSZ-13 zeolite for relocating Cu2+species and thus allows the redistribution of the Cu species.The catalytic results showed that the ion-exchanged Cu-SSZ-13 zeolites exhibit quite different catalytic performance in NH3-SCR reaction but superior to the parent counterpart.The structure–activity relationship analysis indicates that the redistribution of Cu species rather than other factors(e.g.,crystallinity,chemical composition,and porous structure)is responsible for the improved NH3-SCR performance and SO_(2) and H_(2)O resistance.Our work offers an effective method to precisely adjust the Cu distribution in preparing the industrial SCR catalysts.

Synthesis and Characterization of Ion-exchange Sulfonated Poly (ether sulfone)

N,N＇-Bis（3-hydroxyphenyl）-1,8,4,5-naphthalenetetracarboxylic bisimide was prepared from the reaction of 1,8,4,5-naphthalenetetrcarboxylic acid dianhydride and 2-aminophenol in N, N-dimethylformamide. Polymerization of this bisimide with 4,4＇-difluorodiphenylsulfone and disodium 3,3＇-disulfonate4,4＇-difluorodiphenylsulfone gave ion-exchange sulfonated poly（ether sulfone）. The structure of the title compound was characterized with H-NMR and its polymer was characterized with FT-IR.

Research on changes of hydrodynamics and ion-exchange adsorption in Brackish-Water Interface

In light of multiple field experiments in typical tidal areas with active sea-land interaction, corresponding analysis through hydrodynamic simulation and of ion composition evolution all insist on following conclusions. Due to the tide, the groundwater level is basically in line with its level but with a slight lag. Moreover, smaller amplitude of such changes were always accompanied by greater distance from shores. In this paper, two salt-freshwater interfaces were identified, namely, a large wedge-shaped interface and an inverted U-shaped one located at K5 (monitoring point). The critical hydraulic gradient of saltwater intrusion was between 0.0345 and 0.0377. Apart from that, mathematical and physical models were adopted to measure the influence of tides, showing a inverse proportion to the hydraulic gradient In addition, characteristics of ionic components can prove that K^+ was adsorbed and Ca^2+ was displaced during saline intrusion, while a reverse process was witnessed during desalting. In summary, cation exchange adsorption plus other complex physical chemical effects would take place during saltwater intrusion.

Elution Behaviour of Monocarboxylic Acids on a Cation-exchange Resin Column

The retention mechanism of monocarboxylic acids on a cation-exchange resin column was investigated. It was assumed that both Donnan membrane equilibrium and adsorption equilibrium were involved in the chromatographic process. On the basis of the proposed mechanism, an equation was derived for correlating distribution coefficient, Kd, dissociation constant, Aa, and adsorption equilibrium constant, K, of the analyzed acid. By this approach, retention data for some aliphatic acids under different operating conditions were predicted. Results are reasonably in agreement with experiment.

A RAPID METHOD TO DETERMINE DIFFUSION COEFFICIENTS OF COUNTER-IONS IN AN ION-EXCHANGE MEMBRANE

1 INTRODUCTIONRapid and precise methods to obtain the diffusion coefficients of counter-ions are im-portant for the characterization of ion exchange membranes.Many theoreticaldescriptions of ion transport in ion exchange membranes have been developed by usingthe principles of irreversible thermodynamics,or the Nernst-Planck equations.Fick’s law can also be used for the description of the transport of ions with equaldiffusivity.However,for counter-ions of different diffusivities,Nerst-Planck