Bacterial Cellulose/Zwitterionic Dual-network Porous Gel Polymer Electrolytes with High Ionic Conductivity

Bacterial cellulose(BC)was innovatively combined with zwitterionic copolymer acrylamide and sulfobetaine methacrylic acid ester[P(AM-co-SBMA)]to build a dual-network porous structure gel polymer electrolytes(GPEs)with high ionic conductivity.The dual network structure BC/P(AM-co-SBMA)gels were formed by a simple one-step polymerization method.The results show that ionic conductivity of BC/P(AM-co-SBMA)GPEs at the room temperature are 3.2×10^(-2) S/cm@1 M H_(2)SO_(4),4.5×10^(-2) S/cm@4 M KOH,and 3.6×10^(-2) S/cm@1 M NaCl,respectively.Using active carbon(AC)as the electrodes,BC/P(AM-co-SBMA)GPEs as both separator and electrolyte matrix,and 4 M KOH as the electrolyte,a symmetric solid supercapacitors(SSC)(AC-GPE-KOH)was assembled and testified.The specific capacitance of AC electrode is 173 F/g and remains 95.0%of the initial value after 5000 cycles and 86.2%after 10,000 cycles.

Improvement of ionic conductivity of solid polymer electrolyte based on Cu-Al bimetallic metal-organic framework fabricated through molecular grafting

A composite solid electrolyte comprising a Cu-Al bimetallic metal-organic framework(CAB),lithium salt(LiTFSI)and polyethylene oxide(PEO)was fabricated through molecular grafting to enhance the ionic conductivity of the PEO-based electrolytes.Experimental and molecular dynamics simulation results indicated that the electrolyte with 10 wt.%CAB(PL-CAB-10%)exhibits high ionic conductivity(8.42×10~(-4)S/cm at 60℃),high Li+transference number(0.46),wide electrochemical window(4.91 V),good thermal stability,and outstanding mechanical properties.Furthermore,PL-CAB-10%exhibits excellent cycle stability in both Li-Li symmetric battery and Li/PL-CAB-10%/LiFePO4 asymmetric battery setups.These enhanced performances are primarily attributable to the introduction of the versatile CAB.The abundant metal sites in CAB can react with TFSI~-and PEO through Lewis acid-base interactions,promoting LiTFSI dissociation and improving ionic conductivity.Additionally,regular pores in CAB provide uniformly distributed sites for cation plating during cycling.

Effect of sintering temperature and holding time on structure and properties of Li_(1.5)Ga_(0.5)Ti_(1.5)(PO_4)_(3)electrolyte with fast ionic conductivity

Li_(1.5)Ga_(0.5)Ti_(1.5)PO_(4))_(3)(LGTP)is recognized as a promising solid electrolyte material for lithium ions.In this work,LGTP solid electrolyte materials were prepared under different process conditions to explore the effects of sintering temperature and holding time on relative density,phase composition,microstructure,bulk conductivity,and total conductivity.In the impedance test under frequency of 1-10^(6) Hz,the bulk conductivity of the samples increased with increasing sintering temperature,and the total conductivity first increased and then decreased.SEM results showed that the average grain size in the ceramics was controlled by the sintering temperature,which increased from(0.54±0.01)μm to(1.21±0.01)μm when the temperature changed from 750 to 950°C.The relative density of the ceramics increased and then decreased with increasing temperature as the porosity increased.The holding time had little effect on the grain size growth or sample density,but an extended holding time resulted in crack generation that served to reduce the conductivity of the solid electrolyte.

Molecular simulation study of the microstructures and properties of pyridinium ionic liquid[HPy][BF_(4)]mixed with acetonitrile

The microstructures and thermodynamic properties of mixed systems comprising pyridinium ionic liquid[HPy][BF_(4)]and acetonitrile at different mole fractions were studied using molecular dynamics simulation in this work.The following properties were determined:density,self-diffusion coefficient,excess molar volume,and radial distribution function.The results show that with an increase in the mole fraction of[HPy][BF_(4)],the self-diffusion coefficient decreases.Additionally,the excess molar volume initially decreases,reaches a minimum,and then increases.The rules of radial distribution functions(RDFs)of characteristic atoms are different.With increasing the mole fraction of[HPy][BF_(4)],the first peak of the RDFs of HA1-F decreases,while that of CT6-CT6 rises at first and then decreases.This indicates that the solvent molecules affect the polar and non-polar regions of[HPy][BF_(4)]differently.

IONIC CONDUCTIVITY IN CROSSLINKED POLY (METHYLSILOXANE-g-ETHYLENE OXIDE) NETWORK FILMS CONTAINING LITHIUM PERCHLORATE

Polymer electrolytes based on poly (methylsiloxane-g-ethylene oxide) and LiClO_4 have been prepared. The network films crosslinked by a crosslinking agent are found to exhibit a considerably high ionic conductivity of about 10^(-4) Scm^(-1) at room temperature and have good flexibility.

IONIC CONDUCTIVITY OF EPOXY NETWORK/POLYETHYLENE GLYCOL- LITHIUM PERCHLORATE COMPLEX IPN SYSTEM

In an attempt to prepare a polymeric solid electrolyte with both high ionic conductivity at ambient temperature and adequate mechanical strength, an ionic conducting IPN composed of bisphenol A epoxy resin/polyethylene glycol containing LiClO_4 was synthesized. The dependence of conductivity was investigated as a function of salt content, composition and temperature. It has been revealed that a maximum of conductivity appeared when EO/Li=25, where EO denotes the—(CH_2CH_2O)-unit in polyethylene glycol, and that the temperature dependence of conductivity followed VTF equation, suggesting that the motion of ionic carriers resulted from the segmental motion of the polymer. When glycerol epoxy resin was used instead of bisphenol A epoxy, the ambient temperature (25℃) conductivity could somewhat further be raised up to 3×10^(-5) S/cm.

VISCOELASTICITY AND IONIC CONDUCTIVITY OF TWO-COMPONENT EPOXY NETWORK CONTAINING LITHIUM PERCHLORATE

Polymeric solid electrolyte system composed of triglycidyl ether of glycerol (TGEG), diglycidyl ether of polyethylene glycol (DGEPEG)and LiClO_4 salt were synthesized. In this' system the electrolyte has a pecularity that not merely can the LiClO_4 provide ionic carriers, but also catalyze the crosslinking reaction without adding an usual curing agent. The effect of salt content and degree of crosslinking on the viscoelasticity and ionic conductivity were studied. Both WLF and VTF equations were used to treat the experimental data in order to elucidate the mechanism of ionic conduction. It was found that the ionic conductivity of the system is carded out through the segmental motion mechanism. However, the data must be treated with care. For example, in evaluating WLF parameters, the contribution concerned with ionic carrier generation with temperature to the conductivity must be differentiated from that concerned with segmental motion. Besides, the temperature range suitable to WLF equation must also be considered. For VTF equation, it might be inapplicable ff the temperature is too low and close to the glass transition temperature of the specimen. Further study is needed in order to have a quantitative information on the limitation of these equations.

THE SCATTERING THEORY OF IONIC CONDUCTIVITY OF TERNARY GLASS

The physical expression of electrical conductivity of ternary glass can be obtained by the physical scattering theory of conducting ions by the defects in the glass. The scattering area of ion by the nucleus is given by the law of Rutherford in atomic physics. By this theory, the physical meaning of the microprocess of ionic conductivity of ternary glass is apparent.

Oxygen ionic conductivity of a composite electrolyte SDC-LSGM prepared via glycine-nitrate process

Ce0.8Sm0.2O1.9-δ-La0.9Sr0.1Ga0.8Mg0.2O3-δ（SDC-LSGM）is prepared by the glycine-nitrate process（GNP）.SDC-LSGM composite electrolyte samples with different weight ratios are prepared by the co-combustion method so as to obtain homogeneous nano-sized precursor powders. The X-ray diffraction （XRD） and the scan electron microscope （SEM） are used to investigate the phases and microstructures. The measurements and analyses of oxygen ionic conductivity of SDC-LSGM are carried out through the four-terminal direct current （DC） method and the electrochemical impendence spectroscopy, respectively. The optimum weight ratio of SDC-LSGM is 8∶2, of which the ionic conductivity is 0.113 S/cm at 800℃ and the conductivity activation energy is 0.620 eV. The impendence spectra shows that the grain boundary resistance becomes the main barrier for the ionic conductivity of electrolyte at lower temperatures. The appropriate introduction of LSGM to the electrolyte SDC can not only decrease the electronic conductivity but also improve the conditions of the grain and grain boundary, which is advantageous to cause an increase in oxygen ionic conductivity.

Empirical decay relationship between ionic conductivity and porosity of garnet type inorganic solid-state electrolytes

Ionic conductivity is one of the crucial parameters for inorganic solid-state electrolytes.To explore the relationship between porosity and ionic conductivity,a series of Li_(6.4)Ga_(0.2)La_(3)Zr_(2)O_(12) garnet type solid-state electrolytes with different porosities were prepared via solid-state reaction.Based on the quantified data,an empirical decay relationship was summarized and discussed by means of mathematical model and dimensional analysis method.It suggests that open porosity causes ionic conductivity to decrease exponentially.The pre-exponential factor obeys the Arrhenius Law quite well with the activation energy of 0.23 eV,and the decay constant is averaged to be 2.62%.While the closed porosity causes ionic conductivity to decrease linearly.The slope and intercept of this linear pattern also obey the Arrhenius Law and the activation energies are 0.24 and 0.27 eV,respectively.Moreover,the total porosity is linearly dependent on the open porosity,and different sintering conditions will lead to different linear patterns with different slopes and intercepts.

A collagen-based electrolyte-locked separator enables capacitor to have high safety and ionic conductivity

The conventional liquid electrolytes(LEs) have a high level of ionic conductivity;however, they often suffer from the poor processability and safety risks of potential leakage. Although solid-state electrolytes(SSEs) can solve these inherent problems of LEs, the ionic conductivity of most SSEs is several magnitudes lower than these of LEs. Herein, we report a novel strategy by building liquid ion-transport channels in a solid framework and prepared an electrolyte-locked separator(ELS) using a collagen fiber membrane(CFm). The liquid electrolyte was primarily infiltrated in the smaller voids of CFm, and its ionic conductivity could attain to 9.0×10-3 S cm-1 when the electrolyte absorption(EA) reached up to 112.0%. After centrifuging treatment, the electrolyte retentions(ER) and ionic conductivities of ELS were 108.93% and 8.37×10-3 S cm-1, respectively, which were much higher than those of commercial cellulose separator(CS), exerting excellent liquid-locking performances. In particular, the electrical double-layer capacitors(EDLC) assembled by ELS or CS were characterized and exhibited similar electrochemical performance,demonstrating the satisfactory ability and applicability of ELS for commercial use. In addition, the ELSbased EDLC exhibited favorable flexibility with relative lower loss of capacitance under different angles of bending.

Polymer dispersed ionic liquid electrolytes with high ionic conductivity for ultrastable solid-state lithium batteries

Solid polymer electrolytes(SPEs)have emerged as one of the most promising candidates for building solid-state lithium batteries due to their excellent flexibility,scalability,and interfacial compatibility with electrodes.However,the low ionic conductivity and poor cyclic stability of SPEs do not meet the requirements for practical applications of lithium batteries.Here,a novel polymer dispersed ionic liquid-based solid polymer electrolyte(PDIL-SPE)is fabricated using the in situ polymerization-induced phase separation(PIPS)method.The as-prepared PDIL-SPE possesses both outstanding ionic conductivity(0.74 mS cm^(-1) at 25℃)and a wide electrochemical window(up to 4.86 V),and the formed unique three-dimensional(3D)co-continuous structure of polymer matrix and ionic liquid in PDIL-SPE can promote the transport of lithium ions.Also,the 3D co-continuous structure of PDIL-SPE effectively accommodates the severe volume expansion for prolonged lithium plating and stripping processes over 1000 h at 0.5 mA cm^(-2) under 25℃.Moreover,the LiFePO_(4)//Li coin cell can work stably over 150 cycles at a 1 C rate under room temperature with a capacity retention of 90.6%from 111.1 to 100.7 mAh g^(-1).The PDIL-SPE composite is a promising material system for enabling the ultrastable operation of solid-state lithium-metal batteries.

Promote the conductivity of solid polymer electrolyte at room temperature by constructing a dual range ionic conduction path

Poly(ethylene oxide)(PEO)is a classic matrix model for solid polymer electrolyte which can not only dissociate lithium-ions(Li^(+)),but also can conduct Li^(+) through segmental motion in long-range.However,the crystal aggregation state of PEO restricts the conduction of Li^(+) especially at room temperature.In this work,an amorphous polymer electrolyte with ethylene oxide(EO)and propylene oxide(PO)block structure(B-PEG@DMC)synthesized by the transesterification is firstly obtained,showing an ionic conductivity value of 1.1×10^(5) S/cm at room temperature(25℃).According to the molecular dynamics(MD)simulation,the PO segments would lead to an inconsecutive and hampered conduction of Li^(+),which is not beneficial to the short range conduction of Li^(+).Thus the effect of transformation of aggregation state on the improveme nt of ionic conductivity is not eno ugh,it is n ecessary to further consider the differe nt coupled behaviours of EO and PO segments with Li^(+).In this way,we blend this amorphous polymer(B-PEG@DMC)with PEO to obtain a dual range ionic conductive solid polymer electrolyte(D-SPE)with further improved ionic conductivity promoted by constructing a dual range fast ionic conduction,which eventually shows a further improved ionic conductivity value of 2.3×10^(5) S/cm at room temperature.

A Valence Electron Structure Criterion of Ionic Conductivity of Sr- and Mg-doped LaGaO_3 Ceramics

The valence electron structures of Sr- and Mg-doped LaGaO3 ceramics with different compositions were calculated by Empirical Electron Theory of Solids and Molecules （EET）. A criterion for the ionic conductivity was proposed, i.e. the 1/（nAnB） increases with increasing the ionic conductivity when x or y〈20% （in molar fraction）.

3D spiny AlF_(3)/Mullite heterostructure nanofiber as solid-state polymer electrolyte fillers with enhanced ionic conductivity and improved interfacial compatibility

Lithium metal batteries assembled with solid-state electrolyte can offer high safety and volumetric energy density compared to liquid electrolyte.The polymer solid-state electrolytes of poly(ethylene oxide)(PEO)are widely used in lithium metal solid-state batteries due to their unique properties.However,there are still some defects such as low ionic conductivity at room temperature and weak inhibition of lithium dendrite growth.Herein,the spiny inorganic nanofibers heterostructure with mullite whiskers grown on the surface of aluminum fluoride(AlF_(3))nanofibers are introduced into the PEOLi TFSI electrolytes for the first time to prepare composite solid-state electrolytes.The AlF_(3)as a strong Lewis acid can adsorb anions and promote the dissociation of Li salts.Besides,the specially threedimensional(3D)structure enlarges the effective contacting interface with the PEO polymer,which allows the lithium ions to be transported not only along the large aspect ratio of AlF3nanofibers,but also along the mullite phase in the transmembrane direction rapidly.Thereby,the transport channel of lithium ions at the spiny inorganic nanofibers-polymer interface is further improved.Benefiting from these advantages,the obtained composite solid-state electrolyte has a high ionic conductivity of 1.58×10^(-4)S cm^(-1)at 30℃and the lithium ions transfer number of 0.53.In addition,the AlF3has strong binding energy with anions,low electronic conductivity and wide electrochemical stability window,and reduced nucleation overpotential of lithium during cycling,which is positive for lithium dendrite suppression in solid-state electrolytes.Thus,the assembled symmetric Li/Li symmetric batteries exhibit stable cycling performance at different area capacities of 0.15,0.2,0.3 and 0.4 m A h cm^(-2).More importantly,the LiFePO_(4)(LFP)/Li battery still has 113.5 m A h g-1remaining after 400 cycles at 50℃and the Coulomb efficiency is nearly 100%during the long cycle.Overall,the interconnected structure of 3D spiny inorganic heterostructure nanofiber constitutes fast and uninterrupted lithium ions transport channels,maximizing the synergistic effect of interfacial transport of inorganic fillers and reducing PEO crystallinity,thus providing a novel approach to high performance solid-state electrolytes.

Synthesis and Conductivity of Oxyapatite Ionic Conductor La10-xVx（SiO4）6O3＋x

Apatite-lanthanum silicate has attracted considerable interest in recent years due to its high oxide ion conductivity.In this paper,V-doped samples La10-xVx(SiO4) 6O3+x(0≤x≤1.5) were prepared by sol-gel method and the influences of V-dopant content on calcining temperature and conductivity were reported.The samples were characterized by thermal analysis(TG-DSC) ,X-ray diffraction(XRD) and scanning electron micrograph(SEM) . The apatite was obtained at 800°C,a relatively low temperature in comparison to 1500°C with the conventional solid-state method.The ceramic pellets sintered at 1200°C for 5 h showed a higher relative density than La9.33Si6O26 pellets sintered at 1400°C for 20 h.The conductivities of samples were measured by electrochemical impedance spectroscopy.The conductivity was improved with the increase of V-dopant content on La site.

CONDUCTIVITY BEHAVIOR OF IONIC Al(OH)_3-POLYACRYLAMIDE HYBRIDS IN AQUEOUS SOLUTIONS

The conductivity behavior of Al(OH)3-acrylamide hybrid polyacrylamide (hybrid PAAm) in distilled water was studied. A discontinuity phenomenon of the conductivity (k) versus concentration (c) curve of the hybrid PAAm in a certain concentration regime is found. This phenomenon is dependent on the molecular weight of the hybrid PAAm and on the particle size and content of the Al(OH)3 colloid in the hybrid PAAm. This phenomenon was accounted for assuming ionization of the hybrid PAAm.

Influence of Structural Variations on Electrical Conductivity and Solubility of 1-Vinyl-3-alkylimidazole Halogen Ionic Liquids

Several 1-vinyl-3-alkylimidazolium halogens [VRIM]X, which are functional materials with ethylenic bonds, were synthesized using the microwave-assisted synthesis method. Fourier transform infrared spectroscopy and 1H nuclear magnetic resonance spectroscopy were carded out to analyze the resultant structures. The electrochemical properties and solubility of [VRIM]Br were investigated and discussed in detail. The temperature dependence of pure [VRIM]Br over a wide temperature range of 298.15-323.15 K fitted the Arrhanius equation well. At certain low concentrations, the electrical conductivity of the [VRIM]Br solution significantly increased with increasing solution concentration. The electrical conductivities of the [VRIM]Br observed in water, methanol, and ethanol showed the trend σwater〉 σmethanol 〉σethanol Conductometry showed that the critical miceUe concentrations of the bromines in water, methanol, and ethanol were 6.8-6.9 × 10-6, 1.4-1.5 × 10-5, and 1.9-2.0×10-5 mol.L-1, respectively; these results indicate that [VRIM]Br is an excellent surfactant. The solubility of [VRIM]X in common solvents was determined at 293.15 K, and results indicated that a decrease in solubility could be observed with decreasing dielectric constant of the solvent, elongation of the alkyl chain of the cation, and increasing anion size. Solubility parameters were also determined according to the Hildebrand-Scoff equation.

Enhanced ionic conductivity in LAGP/LATP composite electrolyte

Nasicon materials （sodium superionic conductors） such as Li1.5A10.5Ge1.5（PO4）3 （LAGP） and Li1.4Al0.4Til.6（PO4）3 （LATP） have been considered as important solid electrolytes due to their high ionic conductivity and chemical stability. Compared to LAGP, LATP has higher bulk conductivity around 10^-3 S/cm at room temperature; however, the apparent grain boundary conductivity is almost two orders of magnitude lower than the bulk, while LAGP has similar bulk and grain boundary conductivity around the order of 10-4 S/cm. To make full use of the advantages of the two electrolytes, pure phase Li1.5A10.5Ge1.5（PO4）3 and Li1.4A10.4Ti1.6（PO4）3 were synthesized through solid state reaction, a series of composite electrolytes consisting of LAGP and LATP with different weight ratios were designed. XRD and variable temperature AC impedance spectra were carried out to clarify the crystal structure and the ion transport properties of the composite electrolytes. The results indicate that the composite electrolyte with the LATP/LAGP weight ratio of 80：20 achieved the highest bulk conductivity which shall be due to the formation of solid solution phase Li1.42Alo.42Geo.3Ti1 .28（PO4）3, while the highest grain boundary conductivity appeared at the LATP/LAGP weight ratio of 20：80 which may be due to the excellent interfacial phase between Li1＋xAlxGeyTi2-x-y（PO4）3/LATE All the composite electrolytes demonstrated higher total conductivity than the pure LAGP and LATE which highlights the importance of heterogeneous interface on regulating the ion transport properties.

Measurement of thermal conductivity,viscosity and density of ionic liquid [EMIM][DEP]-based nanofluids

This article studied experimentally the effect of multi-wall carbon nanotubes （MWCNTs） on the thermo physical properties of ionic liquid-based nanofluids. The nanofluids were composed of ionic liquid, 1-ethyl-3- methylimidazolium diethylphosphate [EMIM][DEP], or its aqueous solution[EMIM][DEP]（1） ＋ H20（2） and MWCNTs without any surfactants. The thermal conductivity, viscosity and density of the nanofluids were mea- sured experimentally. The effects of the mass fraction of MWCNTs, temperature and the mole fraction of water on the thermo physical properties of nanofluids were studied. Results show that the thermal conductivity of nanofluids increases within the range of 1.3%-9.7% compared to their base liquids, and have a well linear depen- dence on temperature. The viscosity and density of the nanofluids exhibit a remarkable increase compared with those of the base liquids. Finally, the correlation of the effective thermal conductivity and viscosity of the nanofluids was made using the models in the literatures.