Modeling of Fixed Bed Adsorption Column Parameters of Iron(II) Removal Using Ferrihydrite Coated Brick

Fixed-bed operating experimental column conditions were studied to evaluate the performance of brick from Bangui Region (in Central African Republic), coated with iron oxyhydroxide (ferrihydrite) for the removal of iron(II) from aqueous solution. The prediction of theoretical breakthrough profiles using Bohart and Adams sorption model was employed to achieve characteristic parameters such as depth of exchange zone, time required for exchange zone to move vertically, moving rate for the exchange zone and adsorption capacity useful for fixed-bed column reactor was investigated under varying operating conditions. The effects of bed depth and flow rate on iron(II) adsorption were studied. Our finding revealed that the Brick from Bangui Region (in Central African Republic), coated with ferrihydrite was a very efficient media for the removal of Fe(II) ions from water. The experimental data showed that the depth and the moving rate (10.3 ± 0.6 cm) and (0.208 ± 0.006 cm/min) respectively of the exchange zone (adsorption zone) were independent of variability of the height of the adsorbent bed column, however the variations of the flow rate affect the moving rate of the exchange zone. The bed depth service time (BDST) model was used and permitted us to predict the service times of columns operated at various flow rates and bed depths and these predicted values were compared with the experimental values.

Repressing iron overload ameliorates central poststroke pain via the Hdac2-Kv1.2 axis in a rat model of hemorrhagic stroke

Thalamic hemorrhage can lead to the development of central post-stroke pain.Changes in histone acetylation levels,which are regulated by histone deacetylases,affect the excitability of neurons surrounding the hemorrhagic area.However,the regulato ry mechanism of histone deacetylases in central post-stroke pain remains unclea r.Here,we show that iron overload leads to an increase in histone deacetylase 2expression in damaged ventral posterolateral nucleus neurons.Inhibiting this increase restored histone H3 acetylation in the Kcna2 promoter region of the voltage-dependent potassium(Kv)channel subunit gene in a rat model of central post-stroke pain,thereby increasing Kcna2expression and relieving central pain.However,in the absence of nerve injury,increasing histone deacetylase 2 expression decreased Kcna2expression,decreased Kv current,increased the excitability of neurons in the ventral posterolateral nucleus area,and led to neuropathic pain symptoms.Moreover,treatment with the iron chelator deferiprone effectively reduced iron overload in the ventral posterolateral nucleus after intracerebral hemorrhage,reversed histone deacetylase 2 upregulation and Kv1.2 downregulation,and alleviated mechanical hypersensitivity in central post-stroke pain rats.These results suggest that histone deacetylase 2 upregulation and Kv1.2 downregulation,mediated by iron overload,are important factors in central post-stroke pain pathogenesis and co uld se rve as new to rgets for central poststroke pain treatment.

Solubility of iron(Ⅲ) and nickel(Ⅱ) acetylacetonates in supercritical carbon dioxide

As a common precursor for supercritical CO_(2)(scCO_(2))deposition techniques,solubility data of organometallic complexes in scCO_(2)is crucial for the preparation of nanocomposites.Recently,metal acetylacetonates have shown great potential for the preparation of single-atom catalytic materials.In this study,the solubilities of iron(Ⅲ)acetylacetonate(Fe(acac)3)and nickel(Ⅱ)acetylacetonate(Ni(acac)2)were measured at the temperature from 313.15 to 333.15 K and in the pressure range of 9.5–25.2 MPa to accumulate new solubility data.Solubility was measured using a static weight loss method.The semi-empirical models proposed by Chrastil and Sung et al.were used to correlate the solubility data of Fe(acac)3 and Ni(acac)2.The equations obtained can be used to predict the solubility of the same system in the experimental range.

Ion Probe Study of Silicate Inclusions from Colomera （IIE） Iron Meteorite： the Rare Earth Element Perspective

Coupled with a petrographical study, I carried out an ion probe study of rare earth element microdistributions in mineral phases of silicate inclusions from the Colomera ⅡE iron meteorite. Most mineral grains have homogeneous REEs, but show considerable inter-grain variations by a factor of 2 to 100. The whole rock REE abundances for Colomera, estimated by combining REE data with modal abundances, are relatively LREE-enriched with REEs of -10'CI, which suggest that Colomera silicates were highly differentiated and might represent a low degree partial melt (-10%) of a chondritic source. REE geochemistry of Colomera silicate inclusions points to an origin that involves differentiation, dynamic mixing, remelting, reduction, recrystallization, and subsequent rapid cooling near the surface of a planetary body.

Some Hybrid Systems of Chiral Schiff Base Zn(II) Complexes and Photochromic Spiropyrans for Environmental Ion Sensing

This is a review article including our recent results and some previous photo functional hybrid system having potential applications for environmental ion sensing. We have prepared several new and known chiral Schiff base Zn(II) complexes and measured (and also calculated) absorption and fluorescence spectra for sole complexes. After assembling hybrid systems with 1,3,3-trime- thylindolino-6’-nitrobenzopyrylospiran (SP) in methanol solutions, we measured spectral changes before and after alternate irradiation of UV and visible light. Intensity of fluorescence spectra for pale yellow Zn(II) complexes (λem = 450 nm, λex = 270 and 360 nm) was quenched by colorless SP (λem = 533 nm, λex = 612 nm). After UV light irradiation to form purple merocyanine (MC), photoisomerization resulted in changes of the intensity of absorption spectra as well as fluorescence spectra. Thus the hybrid systems could successfully act as molecular logic circuit by input (excitation by light) and output (intensity of fluorescence peaks). Moreover, we investigated concentration dependence of doped Zn(II) and Cu(II) ions to confirm quenching of intensity of fluorescence peaks by Zn(II) and Cu(II) MC complexes for metal ion sensing in solutions.

Synthesis, characterization, and stability of iron (III) complex ions possessing phenanthroline-based ligands

It has previously been demonstrated that phenanthroline-based ligands used to make gold metallotherapuetics have the ability to exhibit cytotoxicity when not coordinated to the metal center. In an effort to help assess the mechanism by which these ligands may cause tumor cell death, iron binding and removal experiments have been considered. The close linkage between cell proliferation and intracellular iron concentrations suggest that iron deprivation strategies may be a mechanism involved in inhibiting tumor cell growth. With the creation of iron (III) phen complexes, the iron binding abilities of three polypyridal ligands [1,10-phenanthroline (phen), 2,9-dimethyl-1, 10-phenanthroline (methylphen), and 2,9-di-sec-butyl-1, 10-phenanthroline (sec-butylphen)] can be tested via a competition reaction with a known iron chelator. Therefore, iron (III) complexes possessing all three ligands were synthesized. Initial mass spectrometric and infrared absorption data indicate that iron (III) tetrachloride complex ions with protonated phen ligands (RphenH+) were formed: [phenH][FeCl4], [methylphenH][FeCl4], [sec-butylphenH][FeCl4]. UV-vis spectroscopy was used to monitor the stability of the complex ions, and it was found that the sec-butylpheniron complex was more stable than the phen and methylphen analogues. This was based on the observation that free ligand was observed immediately upon the addition of EDTA to the [phenH][FeCl4] and [methylphenH] [FeCl4] complex ions.

Separation and Concentration of Indium from Leaching Solution Containing Indium, Antimony and Iron Ions

Processing conditions of effectively separating indium from the leaching solution of a smelting antimony slag were studied. For the leaching solution containing indium and antimony and iron ions, indium was separated by extracting with HDEHP kerosine solution, washing antimony and iron ions with oxalic acid solution and stripping indium with a dilute solution of hydrochloric acid. InCl 3 solution with purity above 90% is obtained. Indium can be enriched through a circulation of stripping with a dilute HCl solution. The concentration of InCl 3 solution is about 25～30 g/L.

Topotactically constructed nickel-iron(oxy)hydroxide with abundant in-situ produced high-valent iron species for efficient water oxidation

The low efficiency of oxygen evolution reaction(OER) is regarded as one of the major roadblocks for metal-air batteries and water electrolysis.Herein,a high-performance OER catalyst of NiFe_(0.2)(oxy)hydroxide(NiFe_(0.2)-O_(x)H_(y)) was developed through topotactic transformation of a Prussian blue analogue in an alkaline solution,which exhibits a low overpotential of only 263 mV to reach a current density of 10 mA cm^(-2) and a small Tafel slope of 35 mV dec-1.Ex-situ/operando Raman spectroscopy results indicated that the phase structure of NiFe_(0.2)-O_(x)H_(y) was irreversibly transformed from the type of α-Ni(OH)_(2) to γ-NiOOH with applying an anodic potential,while ex-situ/operando 57Fe Mossbauer spectroscopic studies evidenced the in-situ production of abundant high-valent iron species under OER conditions,which effectively promoted the OER catalysis.Our work elucidates that the amount of high-valent iron species in-situ produced in the NiFe(oxy)hydroxide has a positive correlation with its water oxidation reaction performance,which further deepens the understanding of the mechanism of NiFe-based electrocatalysts.

A Fiber Optic Sensor for Determination of 2,4-dichlorophenol based on Iron(Ⅱ) Phthalocyanine Catalysis

A new fi ber optic sensor based on the oxidation of 2,4-dichlorophenol（DCP） catalyzed by iron（II） phthalocyanine（Fe（II）Pc） was developed for the determination of DCP. The optical oxygen sensing fi lm containing fl uorescence indicator Ru（bpy）3Cl2 was used to detect the consumption of oxygen in solution. Moreover, a lock-in amplifier was used to determine the lifetime of the sensor head by detecting its phase delay change. The results reveal that the sensor has a linear detection range of 1.0×10^-6- 9.0×10^-5 mol/L and a response time of 5 min. The sensor also has high selectivity, good repeatability and stability. It can be used effectively to determine DCP concentration in real samples.

Bioadsorption of Cd (II) from Contaminated Water on Treated Sawdust: Adsorption Mechanism and Optimization

Sawdust (SD) a very low cost material has been utilized as adsorbent material for the removal of Cd (II) from aqueous solutions after treatment with mono methylol urea (MMU) in the presence of zinc chloride as a catalyst to form MMU-SD. The reaction of MMU-SD was carried out under different conditions including MMU/SD molar ratio, catalyst concentration, and reaction time and temperature. Adsorption studies have been carried out to determine the effect of agitation time, pH, adsorbent and adsorbate concentrations on the adsorption capacity of Cd (II) ions onto MMU-SD. Langmuir, Freundlich and Redlich-Peterson isotherm models were applied in the adsorption studies. The experimental data were analyzed using various sorption kinetic models. The removal processes of Cd (II) onto MMU-SD particles could be well described by the pseudo-second order model. The maximum adsorption capacity of Cd(II) onto MMU-SD was 909 mg/g. Similarly, the Freundlich constant 1/n value was 0.45.

Improvement of Fe(Ii)-Adsorption Capacity of Feooh-Coated Brick in Solutions, and Kinetics Aspects

The adsorbent, iron oxy-hydroxide coated brick, was used in the present work for removal of iron(II) from aqueous solutions. The adsorption performances of this composite were significantly improved when brick pellets (as a support material) were pre-treated in a 6 M HCl solution at 90°C for 6 hours, when compared to untreated ones and those pre-washed in a 1M HCl solution at RT for 1 day. This phenomenon was attributed to larger surface areas measured for modified brick by BET, thus enabling a better FeOOH deposition. The ability of this new composite to better adsorb Fe2+ ions from synthetic solutions was evidenced from fixed-bed column experiments: data were compared to those obtained from raw brick and iron oxides - coated sand columns. The adsorption mechanism followed better pseudosecond-order reaction kinetics, suggesting a chemisorption process, and the rate constant increased with a temperature increase, revealing the endothermic nature of Fe(II) adsorption. Furthermore, the equilibrium data fitted the Langmuir isotherm model with a maximum monolayer sorption capacity Qmax = 0.669 mg/g and a Langmuir constant KL = 0.659 L/mg at room temperature. The activation energy (Ea) of Fe(II) adsorption and the changes in entropy (ΔS), enthalpy (ΔH) and free energy (ΔG) of activation were determined, with values suggesting the involvement of an activated chemical adsorption and an associative mechanism.

Sesame Husk as Adsorbent for Copper(II) Ions Removal from Aqueous Solution

In this study, the adsorption behavior of copper(II) ions from aqueous solutions onto sesame husk (SH) was investigated. The effect of different parameters such as pH, contact time, adsorbent dosage, adsorbate concentration, temperature and agitation speed was studied. Thermodynamic parameters, equilibrium isotherms and kinetic data have been evaluated. The functional groups and surface morphology of SH adsorbent were characterized by FTIR and SEM. Adsorption equilibrium isotherms were expressed by Langmuir, Freundlich and Dubinin-Radushkevich (D-R) adsorption models and it was found that Langmuir adsorption model fits the experimental data better than Freundlich and D-R models. The adsorption can be best described by the pseudo second-order kinetic model.

Atomic Absorption and Vibrational Spectral Magnetic Studies on the Removal of Cu(II) and Co(II) Ions Using Synthetic Nano Adsorbent Fe₃O₄

Adsorption of Cu(II) and Co(II) from aqueous solutions on synthetic nano Fe3O4 has been studied. The effect of experimental parameters such as initial concentration of the metal ions, adsorbent dosage, contact time and pH has been investigated. Optimum removal efficiency of Cu(II) ion was found to be 97.8% with the dose rate of 1.07 g/L in 60 minutes at pH = 5.5 and for Co(II) ion, it was found to be 99.2% with the dose rate of2.57 g/L in 10 minutes at pH = 5.4. The removal of Co(II) ions require only 10 minutes with the efficient removal of 99.2%, whereas Cu(II) ions require 60 minutes with the maximum removal of 97.8%. In order to understand the effective removal of Cu(II) and Co(II) ions on Fe3O4, room temperature magnetic measurement was carried out using Vibrational Spectrum Magnetometer (VSM), before and after adsorption with a maximum applied magnetic field of 20,000 G.

Chitosan—The Application of a Natural Polymer against Iron Hydroxide Deposition

As a consequence of mining, heavy metal ions can be exposed to the environment hence contaminate ground water and surface water amongst others. The natural polymer chitosan was proved to be an excellent adsorber material for the effective removal of iron and sulfate ions in batch as well as in column experiments. The adsorption behavior of iron ions, as well as sulfate ions was investigated by utilizing chitosan flakes as a natural adsorbent. The removal was studied using adsorbance measurements, SEM and SEM-EDX. The adsorption capacity of chitosan was determined at different times. The received adsorption capacities for iron ions were very promising with a maximum adsorption capacity of 85 mg/g and a rate of separation of 100%. The maximum adsorption capacity obtained for sulfate ions was 188.8 mg/g and a rate of 80%.

IRON IONS INCREASE THE THERMOSTABILITY OF PHYCOCYANIN OF SPIRULINA MAXIMA

A spectral method to investigate the effect of Fe3+, Fe2+ on the thermostability ofphycocyanin (PC) of Spirulina maxima showed that iron ions prevent decrease of visible light absorbanceand fluorescence intensity of PC. Increase in denaturation temperature caused by Fe3+ was observed bythe micro - differential scanning calorimetric method. All results showed iron ions maintain the aggrega-tion stability of the PC. The absorption spectrum of phycocyanobilin (PCB, a prosthetic group of PC) withFe3+ in chloroform was quite different from that of free PCB.

PREPARATION OF SURFACE ION-IMPRINTED ATTAPULGITE-SUPPORTED POLYMER AND ITS ADSORPTION BEHAVIORS OF Sr(II)

The surface ion-imprinting concept and chitosan incorporated sol-gel process were applied to the preparation of a new attapulgite-supported organic-inorganic hybrid polymer for selective separation of Sr(II) from aqueous solution. The prepared polymer was characterized with SEM, IR and XRD. The results showed that as a sorbent, it had good configuration and binding sites. Its adsorption behaviors for Sr(II) was investigated by FAAS and ICP-AES. The effects on adsorption capacities, including pH, quiescent time, and adsorbent amount were discussed, and the adsorption isothermal curve was obtained. Then the Kd a parameter estimating relative adsorbability, was conducted to study the selectivity towards Sr(II) of the prepared polymer. Under the optimum conditions, the ion-imprinted polymer offered a fast kinetics for the adsorption of Sr(II) and the maximum capacity was 12.9mg/g. The Kd and K parameters estimating relative adsorbability towards target ion, suggested that selective recognition of the ion-imprinted polymer towards Sr(II) was much higher than that of the non-imprinted polymer and attapulgite. Furthermore, the ion-imprinted polymer is of great regeneration capacity. The prepared functional polymer was shown to be promising for selective preseparation and enrichment of trace Sr(II) in environmental samples.

Structure and Coordination Investigation of Iron-ion Tinting Principle in Ferreous Glass

The tinting phenomena of iron oxide contained glasses were studied from aspects of the electronic configuration, the iron ions coordination fields and the ions structure in glass. Several iron ion tinting forms at different redox or COD (chemical oxygen demand) conditions and their influential factors were given necessary explanations. The results reveal that the Fe^(3+)-O-Fe^(2+) structure is the real tinting reason of iron involved glasses, whereas the Si^(4+)-O-Fe^(3+) and Si^(4+)-O-Fe^(2+) formulations modify the glass colours. Under oxidizing melting condition, the amount of 4/6-coordinated Fe^(3+) increases and makes the glass colour yellowish. Conversely, reducing melting condition makes the 6-coordinated Fe^(2+) increased and gives much blue tint to the glass. The conventional tank furnace melting the very strong reducing condition, which is of high COD glass batch, is not suitable. The high ratio of ferrous/ferric in glass can be obtained with a new refining technology which contains no or little amount of refining agent.

Dynamic scaling behavior of iron nitride thin films prepared by magnetron sputtering and ion implantation

Under far from equilibrium conditions, the formation mechanism of solid can be studied in terms of the dynamic scaling theory. The roughness and dynamic scaling behavior of the Fe-N thin films were studied by atomic force microscopy and grazing incidence X-ray scattering. The results indicate that the roughness of the surface increases with increasing sputtering time during the course of magnetron sputtering, and the surface exhibits a fractal characteristic. While the Fe-N films prepared by compound technology—combining magnetron sputtering with plasma based ion implantation are not in agreement with the fractal theory.

Amplified Detection of Iron Ion Based on Plasmon Enhanced Fluorescence and Subsequently Fluorescence Quenching

A facile and rapid approach for detecting low concentration of iron ion(Fe3+) with improved sensitivity was developed on the basis of plasmon enhanced fluorescence and subsequently amplified fluorescence quenching.Au1Ag4@Si O2 nanoparticles were synthesized and dispersed into fluorescein isothiocyanate(FITC) solution. The fluorescence of the FITC solution was improved due to plasmon enhanced fluorescence. However, efficient fluorescence quenching of the FITC/Au1Ag4@Si O2 solution was subsequently achieved when Fe3+, with a concentration ranging from17 n M to 3.4 l M, was added into the FITC/Au1Ag4@Si O2 solution, whereas almost no fluorescence quenching was observed for pure FITC solution under the same condition. FITC/Au1Ag4@Si O2 solution shows a better sensitivity for detecting low concentration of Fe3+compared to pure FITC solution. The quantized limit of detection toward Fe3+was improved from 4.6 l M for pure FITC solution to 20 n M for FITC/Au1Ag4@Si O2 solution.

Demineralised Lignite Fly Ash for the Removal of Zn(II) Ions from Aqueous Solution

Among the various possibilities of limiting the disposal of fly ashes (lignite), their reutilization as adsorbent materials is worthy of consideration. To this end, proper ashes beneficiation techniques can be put into practice. The adsorption of toxic compounds from industrial wastewater is an effective method for both treating these effluents and recycling lignite fly ash. The aim of this paper is to give a contribution for understanding the relationships among beneficiation treatments, adsorbent properties and adsorption mechanism and efficiency. In this context, the lignite fly ash was demineralised using concentrated HCl and HF (FA-DEM) and was used as adsorbent for Zn(II) ions from aqueous solutions. Batch experiments were carried out under various adsorbent dosages, pH, contact time and different metal ion concentrations. For FA-DEM, the 57.7% removal of Zn(II) ion was achieved under the optimum conditions of adsorbent dosages of 4 g/L, pH at 6, temperature at 303 K and the contact time of 1.15 h. The adsorption of Zn(II) ions onto FA-DEM followed the pseudo second order kinetics. The Langmuir isotherm model best represented the equilibrium data.