Caveolin‑1 is critical for hepatic iron storage capacity in the development of nonalcoholic fatty liver disease

Background:Nonalcoholic fatty liver disease(NAFLD)is associated with disordered lipid and iron metabolism.Our previous study has substantiated the pivotal role of Caveolin-1(Cav-1)in protecting hepatocytes and mediating iron metabolism in the liver.This study aimed to explore the specific mechanisms underlying the regulation of iron metabolism by Cav-1 in NAFLD.Methods:Hepatocyte-specific Cav-1 overexpression mice and knockout mice were used in this study.Cav-1-knockdown of RAW264.7 cells and mouse primary hepatocytes were performed to verify the changes in vitro.Moreover,a high-fat diet and palmitic acid plus oleic acid treatment were utilized to construct a NAFLD model in vivo and in vitro,respectively,while a high-iron diet was used to construct an in vivo iron overload model.Besides,iron concentration,the expression of Cav-1 and iron metabolism-related proteins in liver tissue or serum were detected using iron assay kit,Prussian blue staining,Western blotting,immunofluorescence staining,immunohistochemical staining and ELISA.The related indicators of lipid metabolism and oxidative stress were evaluated by the corresponding reagent kit and staining.Results:Significant disorder of lipid and iron metabolism occurred in NAFLD.The expression of Cav-1 was decreased in NAFLD hepatocytes(P<0.05),accompanied by iron metabolism disorder.Cav-1 enhanced the iron storage capacity of hepatocytes by activating the ferritin light chain/ferritin heavy chain pathway in NAFLD,subsequently alleviating the oxidative stress induced by excess ferrous ions in the liver.Further,CD68^(+) CD163^(+) macrophages expressing Cav-1 were found to accelerate iron accumulation in the liver,which was contrary to the effect of Cav-1 in hepatocytes.Positive correlations were also observed between the serum Cav-1 concentration and the serum iron-related protein levels in NAFLD patients and healthy volunteers(P<0.05).Conclusions:These findings confirm that Cav-1 is an essential target protein that regulates iron and lipid metabolic homeostasis.It is a pivotal molecule for predicting and protecting against the development of NAFLD.

Carbon Monoxide Modulates Auxin Transport and Nitric Oxide Signaling in Plants under Iron Deficiency Stress

Carbon monoxide(CO)and nitric oxide(NO)are signal molecules that enhance plant adaptation to environmental stimuli.Auxin is an essential phytohormone for plant growth and development.CO and NO play crucial roles in modulating the plant’s response to iron deficiency.Iron deficiency leads to an increase in the activity of heme oxygenase(HO)and the subsequent generation of CO.Additionally,it alters the polar subcellular distribution of Pin-Formed 1(PIN1)proteins,resulting in enhanced auxin transport.This alteration,in turn,leads to an increase in NO accumulation.Furthermore,iron deficiency enhances the activity of ferric chelate reductase(FCR),as well as the expression of the Fer-like iron deficiency-induced transcription factor 1(FIT)and the ferric reduction oxidase 2(FRO2)genes in plant roots.Overexpression of the long hypocotyl 1(HY1)gene,which encodes heme oxygenase,or the CO donor treatment resulted in enhanced basipetal auxin transport,higher FCR activity,and the expression of FIT and FRO2 genes under Fe deficiency.Here,a potential mechanism is proposed:CO and NO interact with auxin to address iron deficiency stress.CO alters auxin transport,enhancing its accumulation in roots and up-regulating key iron-related genes like FRO2 and IRT1.Elevated auxin levels affect NO signaling,leading to greater sensitivity in root development.This interplay promotes FCR activity,which is crucial for iron absorption.Together,these molecules enhance iron uptake and root growth,revealing a novel aspect of plant physiology in adapting to environmental stress.

A critical review towards the causes of the iron-based catalysts deactivation mechanisms in the selective oxidation of hydrogen sulfide to elemental sulfur from biogas

Hydrogen sulfide(H_(2)S) not only presents significant environmental concerns but also induces severe corrosion in industrial equipment,even at low concentrations.Among various technologies,the selective oxidation of hydrogen sulfide(SOH_(2)S) to elemental sulfur(S) has emerged as a sustainable and environmentally friendly solution.Due to its unique properties,iron oxide has been extensively investigated as a catalyst for SOH_(2)S;however,rapid deactivation has remained a significant drawback.The causes of iron oxide-based catalysts deactivation mechanisms in SOH_(2)S,including sulfur or sulfate deposition,the transformation of iron species,sintering and excessive oxygen vacancy formation,and active site loss,are thoroughly examined in this review.By focusing on the deactivation mechanisms,this review aims to provide valuable insights into enhancing the stability and efficiency of iron-based catalysts for SOH_(2)S.

Effects of free iron oxyhydrates and soil organic matter on copper sorption-desorption behavior by size fractions of aggregates from two paddy soils

Effects of free iron oxyhydrates （Fed） and soil organic matter （SOM） on copper （Cu^2＋） sorption-desorption behavior by size fractions of aggregates from two typical paddy soils （Ferric-Accumulic Stagnic Anthrosol （Soil H） and Gleyic Stagnic Anthrosol （Soil W）） were investigated with and without treatments of dithionite-citrate-bicarbonate and of H2O2. The size fractions of aggregates were obtained from the undisturbed bulk topsoil using a low energy ultrasonic dispersion procedure. Experiments of equilibrium sorption and subsequent desorption were conducted at soil water ratio of 1：20, 25℃. For Soil H, Cu^2＋ sorption capacity of the DCB-treated size fractions was decreased by 5.9% for fine sand fraction, by 40.4% for coarse sand fraction, in comparison to 2.9% for the bnlk sample. However, Cu^2＋ sorption capacities of the H2O2-treated fractions were decreased by over 80% for the coarse sand fraction and by 15% for the clay-sized fraction in comparison to 88% for bulk soil. For Soil W, Cu^2＋ sorption capacity of the DCB-treated size fraction was decreased by 30% for the coarse sand fraction and by over 75% for silt sand fraction in comparison to 44.5% for the bulk sample. Cu^2＋ sorption capacities of the H2O2-treated fractions were decreased by only 2.0% for the coarse sand fraction and by 15% for the fine sand fraction in comparison to by 3.4% for bulk soil. However, Cu^2＋ desorption rates were increased much in H2O2-treated samples by over 80% except the clay-sized fraction （only 9.5%） for Soil H. While removal of SOM with H2O2 tendend to increase the desorption rate, DCB- and H2O2-treatments caused decrease in Cu^2＋ retention capacity of size fractions, Particularly, there hardly remained Cu^2＋ retention capacity by size fractions from Soil H after H2O2 treatment except for clay-sized fraction. These findings supported again the dominance of the coarse sand fraction in sorption of metals and the preference of absorbed metals bound to SOM in differently stabilized status among the size fractions. Thus, enrichment and turnover of SOM in paddy soils may have great effects on metal retention and chemical mobility in paddy soils.

Effect of competing solutes on arsenic(Ⅴ) adsorption using iron and aluminum oxides

The study focused on the effect of several typical competing solutes on removal of arsenic with Fe2O3 and Al2O3. The test results indicate that chloride, nitrate and sulfate did not have detectable effects, and that selenium（Ⅳ） （Se（Ⅳ）） and vanadium（Ⅴ） （V（Ⅴ）） showed slight effects on the adsorption of As（Ⅴ） with Fe2O3. The results also showed that adsorption of As（Ⅴ） on A12O3 was not affected by chloride and nitrate anions, but slightly by Se（Ⅳ） and V（Ⅴ） ions. Unlike the adsorption of As（Ⅴ） with Fe2O3, that with Fe2O3 was affected by the presence of sulfate in water solutions. Both phosphate and silica have significant adverse effects on the adsorption of As（Ⅴ） adsorption with Fe2O3 and Al2O3. Compared to the other tested anions, phosphate anion was found to be the most prominent solute affecting the As（Ⅴ） adsorption with Fe2O3 and Al2O3. In general, Fe2O3 has a better performance than Al2O3 in removal of As（Ⅴ） within a water environment where multi competing solutes are present.

Selective catalytic oxidation of NO over iron and manganese oxides supported on mesoporous silica

The selective catalytic oxidation （SCO） of NO was studied on a catalyst consisting of iron-manganese oxide supported on mesoporous silica （MPS） with different Mn/Fe ratios. Effects of the amount of manganese and iron, oxygen, and calcination temperature on NO conversion were also investigated. It was found that the Mn-Fe/MPS catalyst with a Mn/Fe molar ratio of 1 showed the highest activity at the calcination temperature of 400 °C. The results showed that over this catalyst, NO conversion reached 70% under the condition of 280 °C and a space velocity of 5000 h-1. SO2 and H2O had no adverse impact on the reaction activity when the SCO reaction temperature was above 240 °C. In addition, the SCO activity was suppressed gradually in the presence of SO2 and H2O below 240 °C, and such an effect was reversible after heating treatment.

Column adsorption of Cu(Ⅱ) by polymer-supported nano-iron oxides in the presence of sulfate: Experimental and mathematical modeling

Polymer-supported hydrous iron oxides(HFOs) are promising for heavy metals removal from aqueous systems.The ubiquitous inorganic ligands, e.g., sulfate, are expected to exert considerable impacts on pollutants removal by these hybrid sorbents. Herein, we obtained a hybrid sorbent HFO-PS by encapsulating nanosized HFO into macroporous polystyrene(PS) resin. Both batch and column sorption experiments of Cu(Ⅱ) by HFO-PS were carried out in the presence of sulfate. Obviously, the presence of sulfate is favorable for Cu(Ⅱ) sorption onto HFO-PS.The performances of column Cu(Ⅱ) removal were fitted and predicted with Adams–Bohart, Clark, Thomas and BDST models. Thomas model is suggested best-fit to predict the breakthrough curves. Besides, a linear correlation is observed between breakthrough time and column length based on BDST model, which might be useful for predicting the breakthrough time for Cu(Ⅱ) removal by HFO-PS.

Catalytic performance of cerium iron complex oxides for partial oxidation of methane to synthesis gas

The cerium iron complex oxides oxygen carrier was prepared by the co-precipitation method. The reactions between methane and lattice oxygen from the complex oxides were investigated in a fixed micro-reactor system. The reduced oxygen carder could be re-oxidized by air and its initial state could be restored. The characterizations of the oxygen carders were studied using XRD, O2-TPD, and H2-TPR. The results showed that the bulk lattice oxygen of CeO2-Fe2O3 was found to be suitable for the partial oxidation of methane to synthesis gas. There were two kinds of oxygen species on the oxygen carrier： the stronger oxygen species that was responsible for the complete oxidation of methane, and the weaker oxygen species （bulk lattice oxygen） that was responsible for the selective oxidation of methane to CO and H2 at a higher temperature. Then, the lost bulk lattice oxygen could be selectively supplemented by air re-oxidation at an appropriate reaction condition. CeFeO3 appeared on the oxygen carrier after 10 successive redox cycles, however, it was not bad for the selectivity of CO and H2.

Dissolution kinetics of iron oxides in clay in oxalic acid solutions

Clay samples containing 8.15% iron oxides and 27.49% alumina were leached in oxalic acid. Leaching experiments were per-formed in aqueous solutions of oxalic acid of 0.2-2 mol/L at 40-80 C for up to 90 min. The mixed kinetic mechanism, i.e., t/τ=[（1 2X/3） （1 X）2/3 ]＋b[ 1 （1 X）1/3], seemed to be the most appropriate one to fit the kinetic data of leaching iron oxides contained in clay in the aqueous oxalic acid solutions. The Arrhenius activation energy for leaching in the 1.8 mol/L oxalic acid was found to be 41.035 kJ/mol.

Annealing temperature dependent catalytic water oxidation activity of iron oxyhydroxide thin films

Nanostructured iron oxyhydroxide（Fe OOH） thin films have been synthesized using an electrodeposition method on a nickel foam（NF） substrate and effect of air annealing temperature on the catalytic performance is studied. The as-deposited and annealed thin films were characterized by X-ray diffraction（XRD）,X-ray photoelectron spectroscopy（XPS）, field emission scanning electron microscopy（FE-SEM） and linear sweep voltammetry（LSV） to determine their structural, morphological, compositional and electrochemical properties, respectively. The as-deposited nanostructured amorphous Fe OOH thin film is converted into a polycrystalline Fe;O;with hematite crystal structure at a high temperature. The Fe OOH thin film acts as an efficient electrocatalyst for the oxygen evolution reaction（OER） in an alkaline 1 M KOH electrolyte. The film annealed at 200 °C shows high catalytic activity with an onset overpotential of 240 m V with a smaller Tafel slope of 48 m V/dec. Additionally, it needs an overpotential of 290 mV to the drive the current density of 10 m A/cm;and shows good stability in the 1 M KOH electrolyte solution.

Morphology, chemical compositions and size distribution of rare earth oxides in pure iron

The pure iron was melted and deoxidized by metallic Al and rare earth elements La, Ce and Y respectively at 1600℃ in a vertical resistance furnace. The morphology, chemical composition and size distribution of the inclusions in deoxidized liquid iron have been investigated by using of SEM and image-analysis techniques. The investigated results show that the deoxidation products in molten iron are complex inclusions of rare earth oxide or A12O3 combined with FeO finely distributed. The proper holding time and rapid cooling rate can make inclusions finer. La, Y and Al are more effective than Ce for obtaining finely distributed inclusions.

Relationship Between Iron Oxides and Surface Charge Characteristics in Soils

The relationship between iron oxides and surface charge characteristics in variable charge soils ( latosol and red earth ) was studied in following three ways. ( 1 ) Remove free iron oxides ( Fed ) and amorphous iron oxides ( Feo ) from the soils with sodium dithionite and acid ammonium oxalate solution respectively. ( 2 ) Add 2% glucose ( on the basis of air-dry soil weight ) to soils and incubate under submerged condition to activate iron oxides, and then the mixtures are dehydrated and air-dried to age iron oxides. ( 3 ) Precipitate various crystalline forms of iron oxides onto kaolinite. The results showed that free iron oxides ( Fed ) were the chief carrier of variable positive charges. Of which crystalline iron oxides ( Fed-Feo ) presented mainly as discrete particles in the soils and could only play a role of the carrier of positive charges, and did little influence on negative charges. Whereas the amorphous iron oxides ( Feo ) , which presented mainly as a coating with a large specific surface area, not only had positive charges, but also blocked the negative charge sites in soils. Submerged incubation activated iron oxides in the soils, and increased the amount of amorphous iron oxides and the degree of activation of iron oxide, which resulted in the increase of positive and negative charges of soils. Dehydration and air-dry aged iron oxides in soils and decreased the amount of amorphous iron oxides and the degree of activation of iron oxide, and also led to the decrease of positive and negative charges. Both the submerged incubation and the dehydration and air-dry had no significant influence on net charges. Precipitation of iron oxides onto kaolinite markedly increased positive charges and decreased negative charges. Amorphous iron oxide having a larger surface area contributed more positive charge sites and blocked more negative charge sites in kaolinite than crystalline goethite.

A model for estimating the rate constant between CO_2-CO gas and molten slag containing iron oxides using optical basicity

A simple model for estimating the rate constant between CO2-CO gas and molten slag containing iron oxides was developed using optical basicity only. In this model, the temperature dependence of the rate constant can be described by the Arrhenius law, and the activation energy can be expressed with a linear function of the slag＇s optical basicity. The model was applied to some molten slag systems, such as FeO, FeO-CaO, FeO-SiO2, FeO-Na2O, FeO-CaO-SiO2, FeO-SiO2-P2O5, FeO-SiOE-Na2O, and FeO-CaO-SiOE-P2O5. A comparison between the predicted results and measured data showed that the model worked well.

Synthesis of cation exchange resin-supported iron and magnesium oxides/hydroxides composite for nitrate removal in water

In this study,we reported on the concept and practical use of cation exchange resin(CER)for removing anions in water via pretreating the CER with metal salts.The cation exchange resinsupported iron and magnesium oxides/hydroxides composite(FeMg/CER)was synthesized and introduced as a new and potential adsorbent for selective removal of nitrate ion in the water environment.Characteristics of FeMg/CER were determined by techniques such as Fouriertransform infrared spectroscopy,scanning electron microscopy,and Xray diffraction.The results showed that FeMg/CER material had a high nitrate adsorption capacity of 200 mg NO_(3)^()·g^(1)with a fast equilibrium adsorption time of 30 min at pH 5.In addition,it had good durability of at least 10 times of regeneration,which could be applied to practical water and wastewater treatment.

Lead and Cadmium Adsorption onto Iron Oxides and Manganese Oxides in the Natural Surface Coatings Collected on Natural Substances in the Songhua River of China

Natural surface coatings collected from natural substances （NSCsNS） were employed to study the roles of the main chemical components （iron oxides, manganese oxides, and other components） in controlling the adsorption of lead（Pb） and cadmium（Cd） in aquatic environments. The selective chemical extraction followed by the adsorption of Pb and Cd experiments and statistical analysis, were used to investigate the adsorption property of each component. Hydroxylamine hydrochloride was used to remove manganese oxides selectively, and sodium dithionite was used to extract iron oxides and manganese oxides. The result indicated that iron oxides and manganese oxides played an important role in the adsorption of Pb and Cd on NSCsNS, and the relative contribution was about two-thirds. The contribution of manganese oxides was the greatest, with a lesser role indicated for other components. The adsorption ability of manganese oxides for Pb and Cd was greater than that of iron oxides or other components for Pb and Cd. The Pb adsorption observed in each component was greater than Cd adsorption.

Reduction and carburization of iron oxides for Fischer–Tropsch synthesis

The activation of iron oxide Fischer–Tropsch Synthesis(FTS) catalysts was investigated during pretreatment: reduction in hydrogen followed by carburization in either CO or syngas mixture, or simultaneously reduction and carburization in syngas. A combination of different complementary in situ techniques was used to gain insight into the behavior of Fe-based FTS catalysts during activation. In situ XRD was used to identify the crystalline structures present during both reduction in hydrogen and carburization. An increase in reduction rate was established when increasing the temperature. A complete reduction was demonstrated in the ETEM and a grain size dependency was proven, i.e. bigger grains need higher temperature in order to reduce. XPS and XAS both indicate the formation of a small amount of carbonaceous species at the surface of the bulk metallic iron during carburization.

Adsorption of Propazine, Simazine and Bisphenol A on the Surface of Nanoparticles of Iron Oxide Nanoparticles of Carbon and Metallic Oxides

Simazine and propazine are selective triazine herbicides currently in use to control broad-leaved weeds and annual grasses around the world. Bisphenol A (BPA) is an industrial chemical used in the production of polycarbonate plastics often found in consumer goods, such as plastic containers, baby bottles etc. These synthetic compounds are known to increase the risk of cancer, cause adverse reproductive effect in reptiles, mammals, birds, humans, and lead to other health problems. They have become some of the principal agents of contamination in water bodies around the world through herbicide runoff, industrial waste and leaching. Some triazines such as atrazine are banned in most European countries for over ten years due to their adverse reproductive effect in mammals, birds and humans;however propazine and simazine are still in use around the world. The removal of these compounds from contaminated water is an exigent challenge. In this study, we investigated their affinity for the surface of nanoparticles (NPS) and standard metallic oxides in an effort to exploit the unique potential applications of NPS for water purification systems. We studied the adsorption of the two triazines and BPA on the surface of NPS of iron (III) oxide, NPS of carbon, bulk iron (III) oxide and aluminum oxide at pH 6 and pH 8 using UV-Visible spectroscopy. Result indicates that these compounds have different affinity towards the surface of metallic oxides and carbon at various pHs. In general, there is relatively high adsorption of some of these compounds on the surface of NPS compared to bulk particles. NPS of carbon have shown the highest affinity for all the three compounds. The lower pH was found to be favorable for all of the compounds except for BPA. BPA have shown high adsorption at pH 8 than at pH 6.

The Paleoclimatic Variation Records of Carbonate and Iron Oxides in the Weinan Loess Section

The contents and distributions of CaCO3, Fe2O3, FeO and free Fe2O3 in the Weinan loess section of Shaanxi Province of China were investigated through dense sampling. The re-sults show that the contents of CaCO3 and the ratio of Fe2O3/FeO may be chosen as proxy in-dices for the precipitation and temperature changes in the formation time of the strata, respec-tively. According to these geochemical indices, six stages of palcoclimate evolution are proposed in this region since 142 ka B. P., and secondary climate changes are discussed as well based on the curves of geochemical indices.

Quantitative Estimation of the Changes in Soil CEC after the Removal of Organic Matter and Iron Oxides

The removal of organic matter and iron oxides could increase and decrease soil CEC in tropical and subtropical regions, but the quantitative information is insufficient so far about the change of soil CEC, the influence factors and their contribution. In this study, the subhorizon soils of 24 soil series in the tropical and subtropical China were used, pH, particle size composition, organic matter, iron oxides of these samples were measured, and also CECs were measured and compared for the original soils and after the removal of organic matter and iron oxides. The results showed that, compared with CEC of the original soil, the eliminating organic matter increased soil CEC significantly by 2.28% - 56.50% with a mean of 24.02%, but the further obliterating iron oxides decreased soil CEC significantly by 0.75% - 20.30% with a mean of 7.73%. CEC after the removal of organic matter and iron oxides had positive correlation with iron oxides (p < 0.01) and negative correlation with sand content (p < 0.01 and p < 0.05). CEC after organic matter eliminated was mainly decided by iron oxides (51.68%), followed by silt content (22.19%);while CEC after iron oxides obliterated was mainly determined by iron oxides (50.55%). The increase of CEC after organic matter eliminated was co-affected by the contents of clays, slits, iron oxides and pH (22.00% - 27.34%), while the decrease of CEC after iron oxides obliterated further was dominated by the content of organic matter (66.92%). More other soil parameters should be considered for higher predicting accuracy in the regression model of soil CEC after the removal of organic matter and iron oxides, and the recommended optimal models obtained in this study were as follows: for soil CEC after organic matter eliminated, CEC = 1.665 − 0.546pH − 0.024OM + 0.053FexOy − 0.001Silt + 0.007Clay + 0.972CECoriginal (R2 was 0.923, RSME was 1.55 cmol(+)∙kg−1, p < 0.01), while for soil CEC after iron oxides further obliterated, CEC = 1.665 − 0.546pH − 0.024OM + 0.053FexOy − 0.001Silt + 0.007Clay + 0.972CECoriginal (R2 was 0.923, RMSE was 1.55 cmol(+)∙kg−1, p < 0.01). Further research is needed in the future as for exploring internal functional mechanism in view of soil electrochemistry and mineralogy.

Vicious cycle of lipid peroxidation and iron accumulation in neurodegeneration

Lipid peroxidation and iron accumulation are closely associated with neurodegenerative diseases,such as Alzheimer’s,Parkinson’s,and Huntington’s diseases,or neurodegeneration with brain iron accumulation disorders.Mitochondrial dysfunction,lipofuscin accumulation,autophagy disruption,and ferroptosis have been implicated as the critical pathomechanisms of lipid peroxidation and iron accumulation in these disorders.Currently,the connection between lipid peroxidation and iron accumulation and the initial cause or consequence in neurodegeneration processes is unclear.In this review,we have compiled the known mechanisms by which lipid peroxidation triggers iron accumulation and lipofuscin formation,and the effect of iron overload on lipid peroxidation and cellular function.The vicious cycle established between both pathological alterations may lead to the development of neurodegeneration.Therefore,the investigation of these mechanisms is essential for exploring therapeutic strategies to restrict neurodegeneration.In addition,we discuss the interplay between lipid peroxidation and iron accumulation in neurodegeneration,particularly in PLA2G6-associated neurodegeneration,a rare neurodegenerative disease with autosomal recessive inheritance,which belongs to the group of neurodegeneration with brain iron accumulation disorders.