Synthesis, characterization, and stability of iron (III) complex ions possessing phenanthroline-based ligands

It has previously been demonstrated that phenanthroline-based ligands used to make gold metallotherapuetics have the ability to exhibit cytotoxicity when not coordinated to the metal center. In an effort to help assess the mechanism by which these ligands may cause tumor cell death, iron binding and removal experiments have been considered. The close linkage between cell proliferation and intracellular iron concentrations suggest that iron deprivation strategies may be a mechanism involved in inhibiting tumor cell growth. With the creation of iron (III) phen complexes, the iron binding abilities of three polypyridal ligands [1,10-phenanthroline (phen), 2,9-dimethyl-1, 10-phenanthroline (methylphen), and 2,9-di-sec-butyl-1, 10-phenanthroline (sec-butylphen)] can be tested via a competition reaction with a known iron chelator. Therefore, iron (III) complexes possessing all three ligands were synthesized. Initial mass spectrometric and infrared absorption data indicate that iron (III) tetrachloride complex ions with protonated phen ligands (RphenH+) were formed: [phenH][FeCl4], [methylphenH][FeCl4], [sec-butylphenH][FeCl4]. UV-vis spectroscopy was used to monitor the stability of the complex ions, and it was found that the sec-butylpheniron complex was more stable than the phen and methylphen analogues. This was based on the observation that free ligand was observed immediately upon the addition of EDTA to the [phenH][FeCl4] and [methylphenH] [FeCl4] complex ions.

Synthesis and Structural Characterization of a Cyano-bridged Dinuclear Neodymium(III)-iron(III) Complex [Nd(DMSO)_5(H_2O)_2](μ-CN)[Fe(CN)_5]

A new neodymiumIII-ironIII complex [Nd(DMSO)5(H2O)2](μ-CN)[Fe(CN)5] (DMSO = dimethyl sulfoxide) has been synthesized by the grinding reaction method. The crystal belongs to monoclinic, space group P21/m with a = 8.859(4), b = 13.684(5), c = 12.290(4) ?, ?= 91.85(2)o, C16H34FeN6NdO7S5, Mr= 782.88, V = 1489(1) ?3, Z = 2, Dc = 1.746 g/cm3, S = 0.906, μ(MoKa) = 2.606 mm-1, F(000) = 788, R = 0.0646 and wR = 0.1654. The slightly distorted square-antiprism eightfold-coordinated Nd(III) and approximately oriented octahedrally sixfold- coordinated Fe(III) are linked by a cyano-bridge group to construct a dinuclear compound. The [Nd(DMSO)5(H2O)2](μ-CN)[Fe(CN)5] species are held together via hydrogen bonds to form a three-dimensional framework.

Kinetics on Thermal Decomposition of Iron(III) Complexes of 1,2-Bis(Imino-4’-Antipyrinyl)Ethane with Varying Counter Anions

A comparative thermal decomposition kinetic investigation on Fe(III) complexes of a antipyrine Schiff base ligand, 1,2-Bis(imino-4’-antipyrinyl)ethane (GA)), with varying counter anions viz. CIO4-, NO3-, SCN-, Cl-, and Br-, has been done by thermogravimetric analysis by using Coats-Redfern equation. The kinetic parameters like activation energy (E), pre-exponential factor (A) and entropy of activation (ΔS) were quantified. On comparing the various kinetic parameters, lower activation energy was observed in second stage as compared to first thermal decomposition stage. The same trend has been observed for pre-exponential factor (A) and entropy of activation (ΔS). The present results show that the starting materials having higher activation energy (E), are more stable than the intermediate products, however;the intermediate products possess well-ordered chemical structure due to their highly negative entropy of activation (ΔS) values. The present investigation proves that the counter anions play an important role on the thermal decomposition kinetics of the complexes.

Influence of shape anisotropy on microwave complex permeability in carbonyl iron flakes/epoxy resin composites

To explore the mechanism of carbonyl iron flake composites for microwave complex permeability, this paper investigates the feature of the flakes. The shape anisotropy was certified by the results of the magnetization hysteresis loops and the Mossbauer spectra. Furthermore, the shape anisotropy was used to explain the origin of composite microwave performance, and the calculated results agree with the experiment. It is believed that the shape anisotropy dominates microwave complex permeability, and the natural resonance plays main role in flake.

An analytical method for Fe(Ⅱ) and Fe(Ⅲ) determination in pharmaceutical grade iron sucrose complex and sodium ferric gluconate complex

A robust voltammetric method has been developed and validated for the determination of Fe（Ⅱ） and Fe（Ⅲ） in pharmaceutical iron polysaccharidic complexes. Undesirable low molecular weight iron complexes, at concentration about 3% in the pharmaceutical formulation, can be easily determined with good accuracy and precision. This methodology can be proposed as a viable, environmentally sustainable substitute for the conventional Normal Pulse Polarographic method in US Pharmacopeia, with better analytical figures of merit, and reduced Hg consumption. A deeper insight in Fe（Ⅱ） and Fe（Ⅲ） composition can be gained by the combined use of a new potentiometric technique after chemical decomposition of the complex.

Catalytic performance of cerium iron complex oxides for partial oxidation of methane to synthesis gas

The cerium iron complex oxides oxygen carrier was prepared by the co-precipitation method. The reactions between methane and lattice oxygen from the complex oxides were investigated in a fixed micro-reactor system. The reduced oxygen carder could be re-oxidized by air and its initial state could be restored. The characterizations of the oxygen carders were studied using XRD, O2-TPD, and H2-TPR. The results showed that the bulk lattice oxygen of CeO2-Fe2O3 was found to be suitable for the partial oxidation of methane to synthesis gas. There were two kinds of oxygen species on the oxygen carrier： the stronger oxygen species that was responsible for the complete oxidation of methane, and the weaker oxygen species （bulk lattice oxygen） that was responsible for the selective oxidation of methane to CO and H2 at a higher temperature. Then, the lost bulk lattice oxygen could be selectively supplemented by air re-oxidation at an appropriate reaction condition. CeFeO3 appeared on the oxygen carrier after 10 successive redox cycles, however, it was not bad for the selectivity of CO and H2.

CHARACTERIZATION OF IRON COMPLEXES SUPPORTED ON POLYMER AND THEIR CATALYTIC ACTIVITY IN BUTADIENE POLYMERIZATION

Styrene-acrylic acid copolymer (SAAC)-supported iron complex (SAAC·Fe)was characterized and the effect of the characteristic parameters on the catalytic activity of the complex was investigated. IR spectrum suggested that the complex SAAC·Fe possesses a structure of(C)and the Fe-O bond is higher in covalency.The complex SAAC·Fe with the structure of(C)shoved a higher catalytic activity in butadiene polymerization. When Fe/-COOH molar ratio in SAAC·Fe was about 0.2 the complex gave optimum catalytic activity. The catalytic activity of SAAC·Fe with the higher content of long sequence of acrylic acid units was low. When the content of the short sequence of acrylic acid units was predominant and at the same time the content of the short sequence was approximately equal to that of the long sequence for stryrene, the activity of the complex was high.

The Aggregates in LB Films of Schiff base Aluminium (III) Complex

The surface pressure-area (pi -A) isotherm of Schiff base aluminium (III), tris (2-hydroxy-5-nitro-N-dodecyl-benzylideneaminato) aluminium (III) (denoted as Al(TAl2)(3)), on pure water subphase was investigated. The molecular area, 0.48 nm(2), is one-third of expected value that indicated the aggregation took place. The Langmuir-Blodgett (LB) films of Al(TAl2), was transferred and characterized. The AFM image confirmed the formation of aggregates.

Synthesis and Structure of Iron Complex with 1,2-Dithiolate-1,2-dicarba-closo-dodecaborane [Li(THF)_4][Fe(S_2C_2B_10H_10)_2(THF)]

The crystal of complex [Li(THF)4][Fe(S2C2B10H10)2(THF)] 3 belongs to monoclinic, space group P21 with a = 11.964(2), b = 16.527(3), c = 12.554(3) ? = 108.70(3)? V = 2351.3(8) 3, Z = 2, Mr = 835.95, Dc = 1.181 g/cm3, (MoK? = 5.30 cm1, F(000) = 874, R = 0.0622 and Rw = 0.1538 for 1641 observed reflections with I > 2(I). The ionic complex of 3 contains the square pyramidal anion of [Fe(S2C2B10H10)2(THF)] and the tetrahedral cation of [Li(THF)4]+. The iron is 5-coordinated and located in the square pyramidal configuration. The iron atom and the four sulfur atoms are almost coplanar. The Lithium atom is coordinated with four oxygen atoms of four THF molecules and located in a tetrahedral configuration.

Efficacy and Compliance of Oral Iron Poly-Maltose Complex versus Oral Ferrous Sulfate in the Treatment of Iron Deficiency Anemia in Pregnant Women

Objective: To compare the efficacy and compliance of the conventional therapy of iron deficiency anemia (ferrous sulfate) with the new forms of therapy chewable iron tablets: (iron polymaltose complex) in the treatment of iron deficiency anemia in pregnant women. Methods: This Randomized Control Trial study included 290 pregnant women with iron deficiency anemia, and they were randomly allocated to a control group who received ferrous sulfate capsules for two months and study group who received iron polymaltose complex chewable tablets for two months. Complete Blood Picture (hemoglobin level and hematocrit level) and Serum ferritin level were done after four and eight weeks to determine the efficacy. In addition, any complains or side effects had been reported to assess the tolerability of the drugs. Two-factor repeated-measures analysis of variance (ANOVA) was used to compare the change in hemoglobin and serum ferritin levels in both groups. Results: There was no statistical significant difference between the two research groups as regards baseline hemoglobin, and at week 4 from onset of treatment (p values = 0.990, 0.112, consecutively). However, there was statistical significant difference on week 8 of continuous drug intake in both groups in which the iron poly maltose complex research group had significantly higher hemoglobin levels (p value = 0.006). Conclusion: The results of the study showed oral iron polymaltose complex increases Hemoglobin and serum ferritin levels more than oral ferrous sulfate and produces less adverse effects than ferrous sulfate.

Synthesis, Crystal Structure and Magnetic Properties of a One-dimensional Loop-like Iron(Ⅱ) Complex:[Fe(Haip)_2(H_2O)_2]_n (Haip = 5-Ammoniumisophthalato)

An iron（Ⅱ） coordination polymer, [Fe（Haip）2（H2O）2]n （1, Haip = 5-ammoniumiso- phthalato）, has been hydro/solvothermally synthesized and characterized by single-crystal X-ray diffraction, elemental analysis, infrared spectrum and magnetic measurement. Compound 1 crystalizes in monoclinic, space group P2/c with a = 6.9874（14）, b = 9.960（2）, c = 12.894（4） A, β = 117.47（2）°, Fe（C8H6NO4）2（H2O）2, Mr = 452.16, V= 796.2（3） A3, Z = 2, Dc = 1.886 g.cm-3, p = 1.017 mm-1, F（000） = 464.0, 2.71〈0〈28.42°, R = 0.0307, wR = 0.0840 and S = 1.005. Single-crystal X-ray diffraction analysis reveals that 1 features an infinite one-dimensional loop-like chain structure and Haip ligand in 1 is of zwitterionic form. Magnetic measurement results show the dominated ferromagnetic interactions among Fe11 atoms.

Electric Conductivity Study of o-Substituted Phenoxo Iron （Ⅲ） Complexes

The coordination nature of a number of substituted sodiumphenoxides to iron （Ⅲ） ion has been studied. The o-nitrosodiumphenoxide was found to have different coordination behaviour from that the sodium salts of salicylic acid and methylsalicylate showed. The structure of the complexes, the number of the ligands being coordinated to the metal ion, has also been determined by titration, uv-vis spectroscopy, atomic absorption and the flame test. In addition, other sodium phenoxides were also involved in this study for comparison. An electric conductivity study on the resulting complexes was carried out and all complexes were found to be semiconductors.

OXIDATION OF ALKYLBENZENES CATALYZED BY IRON( Ⅱ,Ⅲ)-1,10-PHENANTHROLINE AND 2, 2'-BIPYRIDINE COMPLEXES

Oxidation of alkybenzenes PhCH_2R(R=H, CH_3, C_2H_5 and n-C_3H_7) under 1 atm. of O_2 or air catalyzed by iron(Ⅱ, Ⅲ)-2,2'-bipyridine and 1,10-phenanthroline complexes, affords the aryl-substituted ketones and alcohols with the conversion of 15.00％～34.58％ containing of 97.60％～99.80％ ketones and alcohols. The turnover numbers of these catalysts are over 3500 mol-cat. ^(-1)for 3.5 h.

Synthesis, Crystal Structure, and Magnetic Properties of a New Dinuclear Iron Complex with Schiff Base Ligand

A new dinuclear iron（Ill） complex has been synthesized and structurally charac- terized by X-ray crystallography： [Fem2（L）（C6HsCOO）（SO4）（CH3OH）2]·CH3CN＇CH3OH （1, H3L = N,N＇-bis（salicylidene）q,3-diamino-2-propanol）. Complex 1 belongs to orthorhombic space group Pna21 with a= 11.4400（8）, b = 22.9705（2）, c = 12.5712（9）A, V= 3303.5（4）A3, Z= 4, F（000） = 1576, Dc= 1.531 g·cm-3, Mr= 761.36,μ = 1.007 mm-1, S = 1.014, the final R= 0.0505 and wR= 0.1018. The crystal packing is stabilized by intermolecular O-H…O hydrogen bonds, forming an extended one-dimensional chain structure. The temperature dependence of magnetic susceptibility measurement shows that antiferromagnetic interaction is propagated between the metal centers. Fit as dinuclear arrangement gave parameters ofJ= 19.7 cm-1, g = 1.89 and R2 = 0.9999.

Preparation and Identification of Angelica sinensis Polysaccharide-iron Complex

Angelica sinensis polysaccharide（ASP） was extracted from Angelica sinensis by boiling water. An Angelica sinensis polysaccharide-iron complex（APC） was prepared under the alkaline condition by adding a ferric chloride solution to the ASP solution. Then some identifiable properties of the complex were studied. The content of iron（ Ⅲ ） in the complex was determined with iodometry. The thermal property, the microscopic structure, the spectral characteristics, and N, C, H contents of the complex were examined by a variety of techniques including DSC, TEM, IR, NMR, and elemental analysis. The content of iron（ Ⅲ ） in the complex ranges from 10% to 40%. The DSC result shows that the melting point of the complex is about 450 ℃. The TEM result shows that the complex has an iron（ Ⅲ ） core（β-FeOOH core） linked by hydroxy and oxy bridges, with the polysaccharide chains attached to the surface of the core. The IR and NMR results also show that there is a β-FeOOH core in the complex. The elemental analysis shows that the contents of N, C, H in the complex are, respectively, lower than those of N, C, H in ASP. All our studies indicate that the APC consists of a β-FeOOH core surrounded by ASP.

Synthesis and Crystal Structure of Tris(N-p-methylphenyl-3-hydroxy-2-ethyl-4-pyridinonato)iron(III)

The complex [Fe(C14H14NO2)3]2H2O has been prepared by reaction of N-p-methylphenyl-3-hydroxy-2-ethyl-4-pyridinone with FeCl36H2O. A single-crystal X-ray study shows that the iron atoms lie in a trigonally distorted octahedral environment coordinated to the hydroxy and ketone oxygen atoms of three ligands in the mer configuration Mr=773.57(C42H46N3O8Fe). The crystal is hexagonal with space group P31c; a=15.943(2), c=17.612(4)? V=3877.0(12)?, Z=4, Dc=1.325g/cm3, m=0.445mm-1, F(000)=1634, R=0.0446, wR= 0.1154 for 3085 reflections with I >2s(I). The bond lengths from iron to oxygens are 1.980(1)?for the ketone oxygens and 2.071(1)?for the hydroxy oxygens. The molecule exhibits the expected propeller shape, and the angle of the trigonal twist is 48.37. The dihedral angles are 0.5(2)?between chelate ring plane and pyridine ring plane and 71.31(7)?between pyridine ring plane and benzene ring plane. The solvent H2O(O(3) and O(4)) molecules are linked with O(2) and O(1) by hydrogen bonds with bond lengths 2.900(1) and 2.999(1)? respectively.

The reaction of the iron thiosulfate-nitrosyl complex with adenosine triphosphoric acid

Iron tetranitrosyl complex bearing the thiosulfate ligand (TNIC) is an efficient nitrogen monoxide donor (NO). He shows antitumor properties and may be used as an original drug for the therapy of acute coronary syndrome. In this work, the reaction of the TNIC with adenosine triphosphoric acid (ATP) was studied. Formation of the products for the reaction of ATP with TNIC was shown by electronic microscopy. The kinetics of the reaction was controlled by spectrofluorometric method, and the complexation constant was measured. The mechanism of interaction of ATP with TNIC was proposed, and the relevant kinetic model satisfactorily described the experimental data, which permitted to calculate the rate constants for these process stages. NMR, IR, and M?ssbauer studies were used for determination of the reaction product structure. NMR study showed TNIC interaction only with adenine part of ATP. The method of IR spectroscopy identified both the absence NO in the reaction products and the occurrence of new Fe-S and Fe-N bonds. M?ssbauer study showed that iron in the reaction products was presented by two forms: Fe(II) and Fe(III). Thus, the structures for the [ATP-Fe2+S] and [ATP-Fe3+S] complexes were proposed.

PROSPECTS AND CRUCIAL PROBLEMS IN OLIGOMERIZATION AND POLYMERIZATION WITH IRON AND COBALT COMPLEX CATALYSTS

The discovery of highly active 2,6-bis（imino）pyridyl iron and cobalt complexes provided a milestone of latetransition metal catalysts for ethylene oligomerization and polymerization with being currently investigated for the scale-up process. The crucial problems are remaining in the catalytic systems： the catalytic systems targeting ethylene polymerization produce more oligomers at elevated reaction temperatures, however, there is a recognizable amount of high-molecularweight polyethylene remained in the modified catalytic system for the oligomerization process. Beyond the modification of bis（imino）pyridyl metal complexes, several alternative proeatalysts＇ models have been developed in our group. This review highlighted the achievements in exploring new iron and cobalt complexes with tridentate NNN ligands as procatalysts for ethylene oligomerization and polymerization.

Synthesis and Characterization of a Thiolate-bridged Diiron Complex with Two Monocoordinated Azido Ligands： [Cp＊Fe（μ-SMe）N3]2 （Cp＊ =η^5-C5Me5）

A new thiolate-bridged diiron complex with two mono-coordinated azido ligands, [Cp＊Fe（kt-SMe）N3]2 （Cp^＊ = η^5-C5Me5）, was synthesized from [Cp＊Fe（η-SMe）MeCNMPF6]2 and NaN3 in a bi-solvent system of acetone and methanol. X-ray crystal structural analysis shows that the compound belongs to the orthorhombic Fdd2 space group, with a = 14.3771（15）, b = 71.424（8）, c = 9.7010（10）A, V = 9961.7（18） A3, C22H36Fe2N6S2, Mr = 560.39, Dc = 1.495 g/cm^3, F（000） = 4704,μ（MoKa） = 1.355 mm-I and Z = 16. The compound consists ofa di（u-thiolate）diiron unit {Cp＊Fe（p-SMe）}2, in which each iron is coordinated by a terminal azido ligand. Magnetic characterizations show spin canting behavior for the title compound.

Synthesis, Structure and Characterization of a Novel Asymmetrical Half-sandwich Binuclear Iron Carborane Complex [η5-C5H3(t-Bu)2]2Fe2(CO)3Se2C2B10H10

Halfsandwich iron dicarbonyl complex [η 5-C5H3（t-Bu）2]Fe（CO）2Cl（1） reacts with 1, 2-dilithium diseleno carborane Li2Se2C2B 10H 10（2） to give a binuclear iron carborane complex [η 5-C5H3（t-Bu）2]2Fe2（CO）3·Se2C2B 10H 10（3）. The X-ray diffraction analysis of complex 3 reveals that one of the iron atoms is chiral.