Microporous chitosan （CS） membranes were directly prepared by extraction of poly（ethylene glycol） （PEG） from CS/PEG blend membrane and were examined for iron and manganese ions removal from aqueous solutions. Th...Microporous chitosan （CS） membranes were directly prepared by extraction of poly（ethylene glycol） （PEG） from CS/PEG blend membrane and were examined for iron and manganese ions removal from aqueous solutions. The different variables affecting the adsorption capacity of the membranes such as contact time, pH of the sorption medium, and initial metal ion concentration in the feed solution were investigated on a batch adsorption basis. The affinity of CS/PEG blend membrane to adsorb Fe（II） ions is higher than that of Mn（II） ions, with adsorption equilibrium achieved after 60 min for Fe（II） and Mn（II） ions. By increasing CS]PEG ratio in the blend membrane the adsorption capacity of metal ions increased. Among all parameters, pH has the most significant effect on the adsorption capacity, particularly in the range of 2.9-5.9. The increase in CS/PEG ratio was found to enhance the adsorption capacity of the membranes. The effects of initial concentration of metal ions on the extent of metal ions removal were investigated in detail. The experimental data were better fitted to Freundlich equation than Langmuir. In addition, it was found that the iron and manganese ions adsorbed on the membranes can be effectively desorbed in 0.1 mol/L HCl solution （up to 98% desorption efficiency） and the blend membranes can be reused almost without loss of the adsorption capacity for iron and manganese ions.展开更多
基金supported by the Housing & Building National Research Centre in EgyptCentral Metallurgical R & D Institute (CMRDI)
文摘Microporous chitosan （CS） membranes were directly prepared by extraction of poly（ethylene glycol） （PEG） from CS/PEG blend membrane and were examined for iron and manganese ions removal from aqueous solutions. The different variables affecting the adsorption capacity of the membranes such as contact time, pH of the sorption medium, and initial metal ion concentration in the feed solution were investigated on a batch adsorption basis. The affinity of CS/PEG blend membrane to adsorb Fe（II） ions is higher than that of Mn（II） ions, with adsorption equilibrium achieved after 60 min for Fe（II） and Mn（II） ions. By increasing CS]PEG ratio in the blend membrane the adsorption capacity of metal ions increased. Among all parameters, pH has the most significant effect on the adsorption capacity, particularly in the range of 2.9-5.9. The increase in CS/PEG ratio was found to enhance the adsorption capacity of the membranes. The effects of initial concentration of metal ions on the extent of metal ions removal were investigated in detail. The experimental data were better fitted to Freundlich equation than Langmuir. In addition, it was found that the iron and manganese ions adsorbed on the membranes can be effectively desorbed in 0.1 mol/L HCl solution （up to 98% desorption efficiency） and the blend membranes can be reused almost without loss of the adsorption capacity for iron and manganese ions.
