The direct reduction process is an important development direction of low-carbon ironmaking and efficient comprehensive utilization of poly-metallic iron ore,such as titanomagnetite.However,the defluidization of reduc...The direct reduction process is an important development direction of low-carbon ironmaking and efficient comprehensive utilization of poly-metallic iron ore,such as titanomagnetite.However,the defluidization of reduced iron particles with a high metallization degree at a high temperature will seriously affect the operation of fluidized bed reduction.Coupling the pre-oxidation enhancing reduction and the particle surface modification of titanomagnetite,the behavior and mechanism of pre-oxidation improvement on fluidization in the fluidized bed reduction of titanomagnetite are systematically studied in this paper.Pre-oxidation treatment of titanomagnetite can significantly lower the critical stable reduction fluidization gas velocity to 0.17 m/s,which is reduced by 56%compared to that of titanomagnetite reduction without pre-oxidation,while achieving a metallization degree of>90%,Corresponding to the different reduction fluidization behaviors,three pre-oxidation operation regions have been divided,taking oxidation degrees of 26%and 86%as the boundaries.Focusing on the particle surface morphology evolution in the pre-oxidation-reduction process,the relationship between the surface morphology of pre-oxidized ore and the reduced iron with fluidization properties is built.The improving method of pre-oxidation on the reduction fluidization provides a novel approach to prevent defluidization by particle surface modification,especially for the fluidized bed reduction of poly-metallic iron ore.展开更多
采用碳中性、清洁、可再生的生物质作为还原剂,对铁精矿内配生物质直接还原及其还原行为进行研究。研究结果表明:铁精矿内配生物质在直接还原前期快速产生CO、H_(2)、CmHn、CO_(2)、H_(2)O等,在反应罐内形成最高可达16 k Pa的压力,有利...采用碳中性、清洁、可再生的生物质作为还原剂,对铁精矿内配生物质直接还原及其还原行为进行研究。研究结果表明:铁精矿内配生物质在直接还原前期快速产生CO、H_(2)、CmHn、CO_(2)、H_(2)O等,在反应罐内形成最高可达16 k Pa的压力,有利于生物质热解后在铁精矿颗粒表面及孔隙内沉积生物质炭及其原位气化,生成H2和CO,并与铁氧化物还原反应构成耦合作用,显著促进了铁氧化物低温快速还原。与传统的未反应核模型不同,新生的金属铁向气流方向迁移和聚集,形成了纤维状的金属铁晶须。提高还原温度和延长还原时间能够加快铁晶须的迁移和生长,在还原温度为1040℃和还原时间为50 min的条件下,海绵铁金属化率高达97.21%,铁晶须的宽度达4~10μm。展开更多
Hydrogen-based shaft furnace process is gaining more and more attention due to its low carbon emission, and the reduction behavior of iron bearing burdens significantly affects its operation. In this work, the effects...Hydrogen-based shaft furnace process is gaining more and more attention due to its low carbon emission, and the reduction behavior of iron bearing burdens significantly affects its operation. In this work, the effects of reduction degree, temperature, and atmosphere on the swelling behavior of pellet has been studied thoroughly under typical hydrogen metallurgy conditions. The results show that the pellets swelled rapidly in the early reduction stage, then reached a maximum reduction swelling index (RSI) at approximately 40%reduction degree. The crystalline transformation of the iron oxides during the reduction process was the main reason of pellets swelling. The RSI increased significantly with increasing temperature in the range of 850-1050℃, the maximum RSI increased from 6.66%to 25.0%in the gas composition of 100%H_(2). With the temperature increased, the pellets suffered more thermal stress resulting in an increase of the volume. The maximum RSI decreased from 19.78%to 17.35%with the volume proportion of H_(2) in the atmosphere increased from 55%to 100%at the temperature of 950℃.The metallic iron tended to precipitate in a lamellar structure rather than whiskers. Consequently, the inside of the pellets became regular, so the RSI decreased. Overall, controlling a reasonable temperature and increasing the H_(2) proportion is an effective way to decrease the RSI of pellets.展开更多
Growth process of iron whiskers and mechanism of CaO influence on precipitation morphology of metallic iron at the gas-solid interfaces was studied. Analytical reagents of Fe（NO3）3 and Ca（NO3）2 aqueous solution we...Growth process of iron whiskers and mechanism of CaO influence on precipitation morphology of metallic iron at the gas-solid interfaces was studied. Analytical reagents of Fe（NO3）3 and Ca（NO3）2 aqueous solution were used to prepare sheet film sample of Fe2 O3-CAO by thermal decomposition at high temperature. In-situ observation was con-ducted using a stereo optical microscope and a hot-stage. And reduction kinetics of samples was studied by thermo gravimetrie （TG） method. Some samples after reduction were analyzed by using the scanning electron microscope （SEM）, energy dispersive spectrometer （EDS） and fourier transform infrared （FT-IR） spectrometer. Results indi-cate that during the reduction of iron oxides with CO, metallic iron is mostly precipitated as whisker and the precipi- tation behavior mainly depends on reduction rate. Doping CaO can significantly increase the reduction rate and effec-tively change the precipitation morphology of metallic iron after the reduction. When CaO doping concentration is less than 4% （mass percent）, CaO can promote whisker formation of reduced iron; as it reaches 6% （mass per- cent）, CaO inhibits iron whiskers growth; as it is more than 8% （mass percent）, no whiskers could be observed. Therefore, controlling the quantity of Ca^2＋ is effective to control the formation and growth of iron whiskers during gaseous reduction and thus eliminating ore grain sticking caused by intertexture of iron whiskers.展开更多
基金grateful for financial support from the National Natural Science Foundation of China(Nos.22378405 and 51974287)the Strategic Priority Research Program of the Chinese Academy of Sciences(No.XDA29040100)the National Key Research and Development Program of China(No.2023YFC2908002).
文摘The direct reduction process is an important development direction of low-carbon ironmaking and efficient comprehensive utilization of poly-metallic iron ore,such as titanomagnetite.However,the defluidization of reduced iron particles with a high metallization degree at a high temperature will seriously affect the operation of fluidized bed reduction.Coupling the pre-oxidation enhancing reduction and the particle surface modification of titanomagnetite,the behavior and mechanism of pre-oxidation improvement on fluidization in the fluidized bed reduction of titanomagnetite are systematically studied in this paper.Pre-oxidation treatment of titanomagnetite can significantly lower the critical stable reduction fluidization gas velocity to 0.17 m/s,which is reduced by 56%compared to that of titanomagnetite reduction without pre-oxidation,while achieving a metallization degree of>90%,Corresponding to the different reduction fluidization behaviors,three pre-oxidation operation regions have been divided,taking oxidation degrees of 26%and 86%as the boundaries.Focusing on the particle surface morphology evolution in the pre-oxidation-reduction process,the relationship between the surface morphology of pre-oxidized ore and the reduced iron with fluidization properties is built.The improving method of pre-oxidation on the reduction fluidization provides a novel approach to prevent defluidization by particle surface modification,especially for the fluidized bed reduction of poly-metallic iron ore.
文摘采用碳中性、清洁、可再生的生物质作为还原剂,对铁精矿内配生物质直接还原及其还原行为进行研究。研究结果表明:铁精矿内配生物质在直接还原前期快速产生CO、H_(2)、CmHn、CO_(2)、H_(2)O等,在反应罐内形成最高可达16 k Pa的压力,有利于生物质热解后在铁精矿颗粒表面及孔隙内沉积生物质炭及其原位气化,生成H2和CO,并与铁氧化物还原反应构成耦合作用,显著促进了铁氧化物低温快速还原。与传统的未反应核模型不同,新生的金属铁向气流方向迁移和聚集,形成了纤维状的金属铁晶须。提高还原温度和延长还原时间能够加快铁晶须的迁移和生长,在还原温度为1040℃和还原时间为50 min的条件下,海绵铁金属化率高达97.21%,铁晶须的宽度达4~10μm。
基金financially supported by the National Natural Science Foundation of China (No.51904063)the China Postdoctoral Science Foundation (No.2018M640259)+2 种基金the Fundamental Research Funds for the Central Universities(No.N2025023)the Key research and development project of Hebei Province (No.21314001D)the Plan of Xingliao Talents,China (No.XLYC1902118)。
文摘Hydrogen-based shaft furnace process is gaining more and more attention due to its low carbon emission, and the reduction behavior of iron bearing burdens significantly affects its operation. In this work, the effects of reduction degree, temperature, and atmosphere on the swelling behavior of pellet has been studied thoroughly under typical hydrogen metallurgy conditions. The results show that the pellets swelled rapidly in the early reduction stage, then reached a maximum reduction swelling index (RSI) at approximately 40%reduction degree. The crystalline transformation of the iron oxides during the reduction process was the main reason of pellets swelling. The RSI increased significantly with increasing temperature in the range of 850-1050℃, the maximum RSI increased from 6.66%to 25.0%in the gas composition of 100%H_(2). With the temperature increased, the pellets suffered more thermal stress resulting in an increase of the volume. The maximum RSI decreased from 19.78%to 17.35%with the volume proportion of H_(2) in the atmosphere increased from 55%to 100%at the temperature of 950℃.The metallic iron tended to precipitate in a lamellar structure rather than whiskers. Consequently, the inside of the pellets became regular, so the RSI decreased. Overall, controlling a reasonable temperature and increasing the H_(2) proportion is an effective way to decrease the RSI of pellets.
基金Item Sponsored by National Natural Science Foundation of China ( 50834007 )National Basic Research Program of China ( 2012CB720401 )
文摘Growth process of iron whiskers and mechanism of CaO influence on precipitation morphology of metallic iron at the gas-solid interfaces was studied. Analytical reagents of Fe（NO3）3 and Ca（NO3）2 aqueous solution were used to prepare sheet film sample of Fe2 O3-CAO by thermal decomposition at high temperature. In-situ observation was con-ducted using a stereo optical microscope and a hot-stage. And reduction kinetics of samples was studied by thermo gravimetrie （TG） method. Some samples after reduction were analyzed by using the scanning electron microscope （SEM）, energy dispersive spectrometer （EDS） and fourier transform infrared （FT-IR） spectrometer. Results indi-cate that during the reduction of iron oxides with CO, metallic iron is mostly precipitated as whisker and the precipi- tation behavior mainly depends on reduction rate. Doping CaO can significantly increase the reduction rate and effec-tively change the precipitation morphology of metallic iron after the reduction. When CaO doping concentration is less than 4% （mass percent）, CaO can promote whisker formation of reduced iron; as it reaches 6% （mass per- cent）, CaO inhibits iron whiskers growth; as it is more than 8% （mass percent）, no whiskers could be observed. Therefore, controlling the quantity of Ca^2＋ is effective to control the formation and growth of iron whiskers during gaseous reduction and thus eliminating ore grain sticking caused by intertexture of iron whiskers.
