Effects of urbanization and forest type on species composition and diversity,forest characteristics,biomass carbon sink,and their associations in Changchun,Northeast China:implications for urban carbon stock improvement

Differences in forest attributes and carbon sequestration of each organ and layer between broadleaved and conifer forests of central and outer urban areas are not well-defined,hindering the precise management of urban forests and improvement of function.To clarify the effect of two forest types with different urbanization intensities,we determined differences in vegetation composition and diversity,structural traits,and carbon stocks of 152 plots(20 m×20 m)in urban park forests in Changchun,which had the largest green quantity and carbon density effectiveness.We found that 1.1-fold thicker and healthier trees,and 1.6-to 2.0-fold higher,healthier,denser,and more various shrubs but with sparser trees and herbs occurred in the central urban forests(p<0.05)than in the outer forests.The conifer forests exhibited 30–70%obviously higher tree aboveground carbon sequestration(including stem and leaf)and 20%bigger trees,especially in the outer forests(p<0.05).In contrast,1.1-to 1.5-fold higher branch stocks,healthier and more diverse trees were found in broadleaved forests of both the inner and outer forests(p<0.05).Plant size and dominant species had similarly important roles in carbon stock improvement,especially big-sized woody plants and Pinus tabuliformis.In addition,a higher number of deciduous or needle species positively affected the broadleaved forest of the central urban area and conifer forest of the outer urban area,respectively.These findings can be used to guide precise management and accelerate the improvement of urban carbon function in Northeast China in the future.

Evolution and Characteristics of "Carbon Neutrality Movies"

"Carbon neutrality movies"are movies that focus on carbon neutrality as the object of expression and dissemination.Using carbon neutrality as an element,it influences the development of the plot,reflects environmental changes,and focuses on climate change caused by carbon emissions.At the same time,it focuses on offsetting carbon emissions through carbon neutrality behavior,showcasing the impact of carbon neutrality.From the perspective of ecological movies,the evolution of carbon neutrality movies at three stages can be explored.The first stage is high-carbon movies that reflect the high conflict between humans and the natural environment.The second stage is low-carbon movies,reflecting humanity's pursuit of a harmonious coexistence between humans and nature,thus adopting green and low-carbon behaviors.The third stage is carbon neutrality movies,which awaken or guide the public to pay attention to carbon emissions,promote low-carbon living,guide life practice in a carbon neutrality way,and create a better life.There are three characteristics of"carbon neutrality movies",including scientific reflection on global warming,advocating energy conservation and emission reduction in daily life,and promoting clean energy in policies.

Tectonic evolution and accumulation characteristics of Carboniferous shale gas in Yadu-Ziyun-Luodian aulacogen, Guizhou Province, South China

The Yadu-Ziyun-Luodian aulacogen(YZLA) developed into being NW-trending in the Late Paleozoic,and was considered as an important passive continental margin aulacogen in Guizhou Province, South China. This tectonic zone is considered a large intracontinental thrust-slip tectonic unit, which has undergone a long period of development. It was ultimately determined in the Yanshanian, where the typical Upper Paleozoic marine shales were deposited. In 2021, Well QSD-1 was deployed in the Liupanshui area at the northwest margin of the aulacogen, and obtained a daily shale gas flow of 11011 m3in the Carboniferous Dawuba Formation. It thus achieved a breakthrough in the invesgation of shale gas in the Lower Carboniferous in South China, revealing relatively good gas-bearing properties and broad exploration prospects of the aulacogen. Being different from the Lower Paleozoic strata in the Sichuan Basin and the Yichang area of the Middle Yangtze, the development of the Carboniferous Dawuba Formation in the aulacogen exhibits the following characteristics:(1) The Lower Carboniferous shale is thick and widely distributed, with interbedded shale and marlstone of virous thickness;(2) The total organic carbon(TOC) content of the shale in the Dawuba Formation ranges from 1% to 5%, with an average of 2%, and the thermal maturity of organic matter(Ro) varies from 1% to 4%, with an average of2.5%, indicating good hydrocarbon generation capacity;(3) The main shale in the aulacogen was formed during the fault subsidence stage from the Middle Devonian to the Early Permian. Although the strong compression and deformation during the late Indosinian-Himalayan played a certain role in destroying the formed shale gas reservoirs, comparative analysis suggests that the area covered by the current Triassic strata has a low degree of destruction. It therefore provides good conditions for shale gas preservation,which can be regarded as a favorable area for the next exploration.

Metabolic Characteristics and Functional Diversity of Carbon Source in Microflora of Ponds with Recirculating Aquaculture System

With Biolog Eco microplate, metabolic characteristics and functional diver-sity of carbon source in microflora of ponds were researched based on recitculating ponds and control ponds in order to explore effects of eco-adjustments on microflo-ra in ponds. The results indicate that total number of bacterium, microbial metabolism activity, and diversity index in P7, P8, P1 and P2 kept higher, fol owed by P3, P4, P5 and P6. The utilization rate of microbes on sugars achieved the highest （31.0%-48.7%）, fol owed by carboxylic acid （13.4%-18.0%）, amino acid （10.1%-20.5%）, polymers （9.4%-17.0%）, biopolymer （5.7%-9.7%） and phenol （4.95%-7.50%）. Principal component analysis divided microflora in different ponds, suggesting that microbial community has varied carbon source characteristics and nitrogen-containing compound and biopolymer metabolisms are most affected.

Research on Spatial-Temporal Characteristics and Driving Factor of Agricultural Carbon Emissions in China

Macroscopic grasp of agricultural carbon emissions status, spatial-temporal characteristics as well as driving factors are the basic premise in further research on China’s agricultural carbon emissions. Based on 23 kinds of major carbon emission sources including agricultural materials inputs, paddy ifeld, soil and livestock breeding, this paper ifrstly calculated agricultural carbon emissions from 1995 to 2010, as well as 31 provinces and cities in 2010 in China. We then made a decomposed analysis to the driving factors of carbon emissions with logarithmic mean Divisia index （LMDI） model. The results show：（1） The amount of agricultural carbon emissions is 291.1691 million t in 2010. Compared with 249.5239 million t in 1995, it increased by 16.69%, in which, agricultural materials inputs, paddy ifeld, soil, enteric fermentation, and manure management accounted for 33.59, 22.03, 7.46, 17.53 and 19.39%of total agricultural carbon emissions, respectively. Although the amount exist ups and downs, it shows an overall trend of cyclical rise; （2） There is an obvious difference among regions：the amount of agricultural carbon emissions from top ten zones account for 56.68%, while 9.84%from last 10 zones. The traditional agricultural provinces, especially the major crop production areas are the main source regions. Based on the differences of carbon emission rations, 31 provinces and cities are divided into ifve types, namely agricultural materials dominant type, paddy ifeld dominant type, enteric fermentation dominant type, composite factors dominant type and balanced type. The agricultural carbon emissions intensity in west of China is the highest, followed by the central region, and the east zone is the lowest; （3） Compared with 1995, efifciency, labor and structure factors cut down carbon emissions by 65.78, 27.51 and 3.19%, respectively;while economy factor increase carbon emissions by 113.16%.

Textural characteristics,surface chemistry and oxidation of activated carbon

Numerous researches were reviewed and interpreted to depict a comprehensive illustration of activated carbon and its behavior towards oxidation.Activated carbon as one of the most important adsorbents is tried to be described in this review paper by terms of its＂Textural Characteristics＂and＂Surface Chemistry＂.These two terms,coupled with each other,are responsible for behavior of activated carbon in adsorption processes and in catalytic applications.Although as-prepared activated carbons are usually nonselective and their surfaces suffer from lack of enough reactive groups,their different aspects may be improved and developed by diverse types of modifications.Oxidation is one of the most conventional modifications used for activated carbons.It may be used as a final modification or as a pre-modification followed by further treatment.In this paper,methods of oxidation of activated carbon and other graphene-layer carbon materials are introduced and wet oxidation as an extensively-used category of oxidation is discussed in more detail.

Distribution characteristics of dissolved organic carbon in annular wetland soil-water solutions through soil profiles in the Sanjiang Plain,Northeast China

Overwhelming evidence reveals that concentrations of dissolved organic carbon （DOC） have increased in streams which brings negative environmental impacts. DOC in stream flow is mainly originated from soil-water solutions of watershed. Wetlands prove to be the most sensitive areas as an important DOC reserve between terrestrial and fluvial biogeosystems. This reported study was focused on the distribution characteristics and the controlling factors of DOC in soil-water solutions of annular wetland, i.e., a dishing wetland and a forest wetland together, in the Sanjiang Plain, Northeast China. The results indicate that DOC concentrations in soilwater solutions decreased and then increased with increasing soil depth in the annular wetland. In the upper soil layers of 0-10 cm and 10-20 cm, DOC concentrations in soil-water solutions linearly increased from edge to center of the annular wetland （R^2 = 0.3122 and R^2 = 0.443）. The distribution variations were intimately linked to DOC production and utilization and DOC transport processes in annular wetland soil-water solutions. The concentrations of total organic carbon （TOC）, total carbon （TC） and Fe（II）, DOC mobility and continuous vertical and lateral flow affectext the distribution variations of DOC in soil-water solutions. The correlation coefficients between DOC concentrations and TOC, TC and Fe（II） were 0.974, 0.813 and 0.753 respectively. These distribution characteristics suggested a systematic response of the distribution variations of DOC in annular wetland soil-water solutions to the geometry of closed depressions on a scale of small catchments. However, the DOC in soil pore water of the annular wetland may be the potential source of DOC to stream flow on watershed scale. These observations also implied the fragmentation of wetland landscape could bring the spatial-temporal variations of DOC distribution and exports, which would bring negative environmental impacts in watersheds of the Sanjiang Plain.

Decomposition characteristics of organic materials and their effects on labile and recalcitrant organic carbon fractions in a semi-arid soil under plastic mulch and drip irrigation

Labile organic carbon （LC） and recalcitrant organic carbon （RC） are two major fractions of soil organic carbon （SOC） and play a critical role in organic carbon turnover and sequestration. The aims of this study were to evaluate the variations of LC and RC in a semi-arid soil （Inner Mongolia, China） under plastic mulch and drip irrigation after the application of organic materials （OMs）, and to explore the effects of OMs from various sources on LC and RC by probing the decomposition characteristics of OMs using in-situ nylon mesh bags burying method. The field experiment included seven treatments, i.e., chicken manure （CM）, sheep manure （SM）, mushroom residue （MR）, maize straw （MS）, fodder grass （FG）, tree leaves （TL） and no OMs as a control （CK）. Soil LC and RC were separated by Huygens D＇s method （particle size-density）, and the average soil mass recovery rate and carbon recovery rate were above 95%, which indicated this method was suitable for carbon pools size analysis. The LC and RC contents significantly （P〈0.01） increased after the application of OMs. Moreover, LC and RC contents were 3.2%-8.6% and 5.0%-9.4% higher in 2016 than in 2015. The applications of CM and SM significantly increased （P〈0,01） LC content and LC/SOC ratio, whereas they were the lowest after the application of TL. However, SOC and RC contents were significantly higher （P〈0.01） after the applications of TL and MS. The correlation analysis indicated the decomposition rate of OMs was positively related with LC content and LC/SOC ratio. In addition, lignin, polyphenol, WOM （total water-soluble organic matter）, WHA （water-soluble humic acid）, HSL （humicdike substance） and HAL （humic acid-like） contents in initial OMs played important roles in SOC and RC. In-situ nylon mesh bags burying experiment indicated the decomposition rates of CM, SM and MS were significantly higher than those of MR, FG, and TL. Furthermore, MS could result in more lignin derivatives, WHA, and HAL polymers in shorter time during the decomposition process. In conclusion, the application of MS in the semi-arid soil under a long-term plastic mulch and drip irrigation condition could not only improve soil fertility, but also enhance soil carbon sequestration.

Spatial Characteristics of Soil Organic Carbon Storage in China's Croplands

The soil organic carbon (SOC) pool is the largest component of terrestrial carbon pools. With the construction of a geographically referenced database taken from the second national general soil survey materials and based on 1546 typical cropland soil profiles, the paddy field and dryland SOC storage among six regions of China were systematically quantified to characterize the spatial pattern of cropland SOC storage in China and to examine the relationship between mean annual temperature, precipitation, soil texture features and SOC content. In all regions, paddy soils had higher SOC storage than dryland soils, and cropland SOC content was the highest in Southwest China. Climate controlled the spatial distribution of SOC in both paddy and dryland soils, with SOC storage increasing with increasing precipitation and decreasing with increasing temperature.

Modeling effects of temperature and precipitation on carbon characteristics and GHGs emissions in Abies fabric forest of subalpine

Abies fabric forest in the eastern slope of Gongga mountain is one type of subalpine dark coniferous forests of southwestern China. It is located on the southeastern edge of the Qinghai-Tibet plateau and is sensitive to climatic changes. A process-oriented biogeochemical model, Forest-DNDC, was applied to simulate the effects of climatic factors, temperature and precipitation changes on carbon characteristics, and greenhouse gases （GHGs） emissions in A. fabric forest. Validation indicated that the Forest-DNDC could be used to predict carbon characteristics and GHGs emissions with reasonable accuracy. The model simulated carbon fluxes, soil carbon dynamics, soil CO2, N2O, and NO emissions with the changes of temperature and precipitation conditions. The results showed that with variation in the baseline temperature from -2℃ to ＋2℃, the gross primary production （GPP） and soil organic carbon （SOC） increased, and the net primary production （NPP） and net ecosystem production （NEP） decreased because of higher respiration rate. With increasing baseline precipitation the GPP and NPP increased slightly, and the NEP and SOC showed decreasing trend. Soil CO2 emissions increased with the increase of temperature, and CO2 emissions changed little with increased baseline precipitation. With increased temperature and decreased baseline temperature, the total annual soil N2O emissions increased. With the variation of baseline temperature from -2℃ to ＋2℃, the total annual soil NO emissions increased. The total annual N2O and NO emissions showed increasing trends with the increase of precipitation. The biogeochemical simulation of the typical forest indicated that temperature changes strongly affected carbon fluxes, soil carbon dynamics, and soil GHGs emissions. The precipitation was not a principal factor affecting carbon fluxes, soil carbon dynamics, and soil CO2 emissions, but changes in precipitation could exert strong effect on soil N2O and NO emissions.

Invertebrate community characteristics in biologically active carbon filter

Biologically active carbon （BAC） system was set up in a water plant of South China during January to December 2007,to study the invertebrate community characteristics of BAC filter.Thirty-seven invertebrate species were found,of which 28 belonging to rotifers.Filter operation could lead to an output of invertebrates in high abundances with the filtrate,and the maximum density could reach 5608 individuals/m 3.Average abundances in the effluent water increased in 27-33 folds in comparison to the influent water during the sampling period.Invertebrate community succession had the following trend：filter-feeding animals → small benthic invertebrates → large benthic and resistant invertebrates.Abundances of large-sized invertebrates （copepod adult and oligochaete） at bigger-media column were significantly higher than that at small-media column.The results implied the abundant species diversity of invertebrate in BAC filter.The relationship between invertebrate and biofilm still remain to be studied in detail.

Influence of Nitric Acid Concentration on Characteristics of Olive Stone Based Activated Carbon

In this work we investigated the effect of nitric acid concentration on the pore structure,surface chemistry and liquid phase adsorption of olive stone based activated carbon prepared by mixing process using phosphoric acid and steam as activating agents.Chemicals and textural characterization show that the increase of HNO3concentration increases considerably the total acidic groups but decreases specific surface area and pore volume.The study of adsorption in aqueous solutions of two organics,phenol and methylene blue,on raw and oxidized activated carbon indicates that the treatment of mixed activated carbon with different concentrations of nitric acid improves the adsorbent capacity for methylene blue at HNO3concentrations less or equal to 2 mol·L 1,while it has a negative effect on phenol adsorption.

An experimental study on horizontal well waterflooding in the Cretaceous porous carbonate reservoir of Oman

Porous carbonate reservoirs,prevalent in the Middle East,are lithologically dominated by bioclastic limestones,exhibiting high porosity,low permeability,intricate pore structure,and strong heterogeneity.Waterflooding through horizontal wells is commonly used for exploiting these reservoirs.However,challenges persist,such as significant uncertainty and complex operational procedures regarding adjustment effects during the exploitation.The USH reservoir of the Cretaceous D oilfield,Oman exemplifies typical porous carbonate reservoirs.It initially underwent depletion drive using vertical wells,followed by horizontal well waterflooding in the late stage.Currently,the oilfield is confronted with substantial developmental challenges,involving the understanding of residual oil distribution,effective water cut control,and sustaining oil production since it has entered the late development stage.Employing a microscopic visualization displacement system equipped with electrodes,this study elucidated the waterflooding mechanisms and residual oil distribution in the late-stage development of the USH reservoir.The results reveal that the reservoir's vertical stacking patterns act as the main factor affecting the horizontal well waterflooding efficacy.Distinct water flow channels emerge under varying reservoir stacking patterns,with post-waterflooding residual oil predominantly distributed at the reservoir's top and bottom.The oil recovery can be enhanced by adjusting the waterflooding's flow line and intensity.The findings of this study will provide theoretical insights of waterflooding mechanisms and injection-production adjustments for exploiting other porous carbonate reservoirs in the Middle East through horizontal wells.

Impact of effective stress on permeability for carbonate fractured-vuggy rocks

To gain insight into the flow mechanisms and stress sensitivity for fractured-vuggy reservoirs,several core models with different structural characteristics were designed and fabricated to investigate the impact of effective stress on permeability for carbonate fractured-vuggy rocks(CFVR).It shows that the permeability performance curves under different pore and confining pressures(i.e.altered stress conditions)for the fractured core models and the vuggy core models have similar change patterns.The ranges of permeability variation are significantly wider at high pore pressures,indicating that permeability reduction is the most significant during the early stage of development for fractured-vuggy reservoirs.Since each obtained effective stress coefficient for permeability(ESCP)varies with the changes in confining pressure and pore pressure,the effective stresses for permeability of four representative CFVR show obvious nonlinear characteristics,and the variation ranges of ESCP are all between 0 and 1.Meanwhile,a comprehensive ESCP mathematical model considering triple media,including matrix pores,fractures,and dissolved vugs,was proposed.It is proved theoretically that the ESCP of CFVR generally varies between 0 and 1.Additionally,the regression results showed that the power model ranked highest among the four empirical models mainly applied in stress sensitivity characterization,followed by the logarithmic model,exponential model,and binomial model.The concept of“permeability decline rate”was introduced to better evaluate the stress sensitivity performance for CFVR,in which the one-fracture rock is the strongest,followed by the fracture-vug rock and two-horizontalfracture rock;the through-hole rock is the weakest.In general,this study provides a theoretical basis to guide the design of development and adjustment programs for carbonate fractured-vuggy reservoirs.

Analysis of the carbon dioxide mole fraction variation and its transmission characteristics in Taiyuan

Based on the concentrations of CO2,PM2.5 and PM1.0,and conventional meteorological observation data from 2016 to 2018 at Taiyuan station,which belongs to the Shanxi greenhouse gas observation network,the CO2 concentration monthly and daily distribution characteristics,the weekend effect,and the variation characteristics on haze days and non-haze days,are analyzed.By using the Hybrid Single-Particle Lagrangian Integrated Trajectorymodel(backward trajectory model)and surface wind data,the transmission characteristics of atmospheric CO2 in Taiyuan are studied in various seasons.The results show that,in Taiyuan,the CO2 mole fraction in autumn and winter is higher than that in spring and summer,and on haze days is higher than that on non-haze days.The diurnal variation characteristic of CO2mole fraction in each season is‘single peak and single valley’with the peak value around 0700(hereafter refers to Beijing Time)and the valley value around 1600.The CO2 mole fraction on workdays is slightly higher than that on non-workdays and obviously different around 0800 of the early peak.Horizontal diffusion can reduce the CO2 mole fraction,while breezy weather is not beneficial to CO2 diffusion.The wind direction and speed in the upper levels are different from those near the surface,and the close air masses in the southwest–west–northwest sector raise the CO2 concentration in Taiyuan obviously.This indicates that the CO2 in Taiyuan is mainly contributed by local sources.

STUDY ON THE PROPERTIES OF DIFFERENT ACTIVATED CARBON FIBERS AND THEIR ADSORPTION CHARACTERISTICS FOR FORMALDEHYDE

Porous structure and surface chemistry of activated carbon fibers obtained by differ-ent precursors and activation methods were investigated. Adsorption isotherms werecharacterized by nitrogen adsorption at 77K over a relative pressure range from 10 6to 1. The regularization method according to Density Functional Theory (DFT) wasemployed to calculate the pore size distribution in the samples. Their specific surfaceareas were calculated by BET method, micropore volume and microporous specificsurface area calculated by t-plot method and MPD by Horvath-Kawazoe equation. Mi-cropore volume of rayon-based ACF was higher than that of other samples. The staticand dynamic adsorption capacity for formaldehyde on different ACFs was determined.The results show that steam activated Rayon-based A CFs had higher adsorption capac-ity than that of steam and KOH activated PAN-A CFs. Breakthrough curves illustratedthat Rayon-ACFs had longer breakthrough time, thus they possessed higher adsorp-tion capacity for formaldehyde than that of PAN-ACFs. The entire sample had smalladsorption capacity and short breakthrough time for water. Rayon-A CFs had exccl-lent adsorption selectivity for formaldehyde than PAN-ACFs. And the samples withhigh surface areas had relatively high adsorption capacity for formaldehyde. Elementaicontent of different A CFs were performed. Rayon-based A CFs contained more oxygenthan PAN-ACFs, which may be attributed to their excellent adsorption capacity forformaldehyde.

Mechanical performances and microstructural characteristics of reactive MgO-carbonated silt subjected to freezing-thawing cycles

The characteristics of reactive magnesia(MgO)-carbonated silt in respect to long-term stability have not been well understood in severely cold climate despite the usage of reactive MgO in enhancing the engineering performances.Under the binder content of 15%and initial water content of 25%,MgO-admixed silt specimens were carbonized for 3 h and 6 h and then subjected to different numbers of freezingthawing(F-T)cycles.After different F-T cycles,the physico-mechanical properties of MgO-carbonated silt were analyzed in comparison with Portland cement(PC)-stabilized silt through physical and unconfined compression tests.Besides,a series of micro tests on MgO-carbonated specimens was performed including X-ray diffraction(XRD),scanning electron microscopy(SEM)and mercury intrusion porosimetry(MIP)tests.The results demonstrate that both mass change ratio and moisture content of carbonated/stabilized silt decrease,and these values of MgO-carbonated silt are significantly lower while the density is higher compared to PC-stabilized silt.The strengths and moduli of MgO-carbonated silt are still two times higher than those of PC-stabilized specimens and the strength change ratio of keeps above0.8 after F-T cycles.There is no visible transformation between nesquehonite and dypingite/hydromagnesite,although the XRD peaks of nesquehonite decrease and the bonding and filling effects weaken slightly.After 6 and 10 F-T cycles,the pore-size characteristics changed from a unimodal distribution to a three-peak and bimodal distribution,respectively.The total,macro and large pore volumes increase obviously while the medium and small pore volumes decrease except for intra-aggregate pore.The findings show better F-T durability of MgO-carbonated silt,which would be helpful for facilitating the application of MgO carbonation in the soil treatment.

Permeability variation characteristics of coal after injecting carbon dioxide into a coal seam

A theoretical basis for the optimization of carbon dioxide injection parameters and the development of the drainage system can be provided by identifying the permeability change characteristic of coal and rock after injection of carbon dioxide into the coal seam. Sihe, Yuwu, and Changcun mines were used as research sites. Scanning electron microscopy and permeability instruments were used to measure coal properties such as permeability and surface structure of the coal samples at different pH values of carbon dioxide solution and over different timescales. The results show that the reaction between minerals in coal and carbonate solution exhibit positive and negative aspects of permeability-the dissolution reaction between carbonate minerals in coal and acid solution improves the conductivity of coal whilst, on the other hand, the clay minerals in the coal （mainly including montmorillonite, illite and kaolinite） exhibit expansion as a result of ion exchange with the H~ in acid solution, which has a negative effect on the per- meability of the coal. The permeability of coal samples increased at first and then decreased with immer- sion time, and when the soaking time is 2-3 months the permeability of the coal reached a maximum. In general, for coals with permeabilities less than 0.2 mD or greater than 2 roD, the effect on the permeabil- ity is low： when the permeability of the coal is in the range 0.2-2 mD, the effect on the permeability is highest. Research into permeability change characteristics can provide a theoretical basis for carbon diox- ide injection under different reservoir permeability conditions and subsequent drainage.

Assessment of solidification characteristics of carbon-inoculated Mg-3%Al melt by thermal analysis

The Mg-3%Al melt was inoculated by carbon with different holding time.The effect of holding time on grain refining efficiency was evaluated.The solidification characteristics of the carbon-inoculated Mg-3%Al melt with different holding time were assessed by computer-aided cooling curve analysis.The results showed that Mg-3%Al alloy could be effectively refined by carbon inoculation.Slight fading phenomenon occurred with increasing the holding time to 60 min.Carbon inoculation could significantly influence the shape of cooling curves of Mg-3%Al melt.The nucleation starting and minimum temperatures increased.The recalescence undercooling and duration decreased to almost zero after carbon inoculation.The grain refining efficiency of carbon inoculation could be assessed by the shape of the cooling curve and solidification characteristic parameters including nucleation starting and minimum temperatures,recalescence undercooling and duration.

Study on Characteristics and Reduction Countermeasures of the Agricultural Carbon Emission in China

Based on seven carbon sources including chemical fertilizer, pesticide, agricultural film, nitrogen fertilization, agricultural machinery, irri- gation and straw burning, the carbon emissions in agricultural production of China during 1995-2011 was calculated. The results showed that both total agricultural carbon emission and per capita agricultural carbon emission overall presented growth trends, and the growth rate began to slow in recent years. The agricultural carbon emission intensity decreased year by year. Straw burning was the primary carbon source in China＇s agricul- ture, followed by chemical fertilizer. Total agricultural carbon emission in China in 17 years experienced three stages of ＂fluctuated growth -slow drop-new growth＂. Finally, suggestions and countermeasures of the low-carbon agriculture development in China from three aspects were proposed.