Tetrathiafulvalene esters with high redox potentials and improved solubilities for non-aqueous redox flow battery applications

The exploitation of high performance redox-active substances is critically important for the development of non-aqueous redoxflow batteries.Herein,three tetrathiofulvalene(TTF)derivatives with different substitution groups,namely TTF diethyl ester(TTFDE),TTF tetramethyl ester(TTFTM),and TTF tetraethyl ester(TTFTE),are prepared and their energy storage properties are evaluated.It has been found that the redox potential and solubility of these TTF derivatives in conventional carbonate electrolytes increases with the number of ester groups.The battery with a catholyte of 0.2 mol L^(-1) of TTFTE delivers a specific capacity of more than 10 Ah L^(-1) at the current density of 0.5 C with two discharge voltage platforms locating at as high as 3.85 and 3.60 V vs.Li/Liþ.Its capacity retention can be improved from 2.34 Ah L^(-1) to 3.60 Ah L^(-1) after 100 cycles by the use of an anion exchange membrane to block the crossover of TTF species.The excellent cycling stability of the TIF esters is supported by their well-delocalized electrons,as revealed by the density function theory calculations.Therefore,the introduction of more and larger electron-withdrawing groups is a promising strategy to simultaneously increase the redox-potential and solubility of redox-active ma-terials for non-aqueous redoxflow batteries.

Progress and prospects of pH-neutral aqueous organic redox flow batteries:Electrolytes and membranes

Aqueous organic redox flow batteries(AORFBs),which exploit the reversible electrochemical reactions of water-soluble organic electrolytes to store electricity,have emerged as an efficient electrochemical energy storage technology for the grid-scale integration of renewable electricity.pH-neutral AORFBs that feature high safety,low corrosivity,and environmental benignity are particularly promising,and their battery performance is significantly impacted by redox-active molecules and ion-exchange membranes(IEMs).Here,representative anolytes and catholytes engineered for use in pH-neutral AORFBs are outlined and summarized,as well as their side reactions that cause irreversible battery capacity fading.In addition,the recent achievements of IEMs for pH-neutral AORFBs are discussed,with a focus on the construction and tuning of ion transport channels.Finally,the critical challenges and potential research opportunities for developing practically relevant pH-neutral AORFBs are presented.

Implications of electrode modifications in aqueous organic redox flow batteries

Aqueous organic redox flow batteries(RFBs)exhibit favorable characteristics,such as tunability,multielectron transfer capability,and stability of the redox active molecules utilized as anolytes and catholytes,making them very viable contenders for large-scale grid storage applications.Considerable attention has been paid on the development of efficient redox-active molecules and their performance optimization through chemical substitutions at various places on the backbone as part of the pursuit for high-performance RFBs.Despite the fact that electrodes are vital to optimal performance,they have not garnered significant attention.Limited research has been conducted on the effects of electrode modifications to improve the performance of RFBs.The primary emphasis has been given on the impact of electrode engineering to augment the efficiency of aqueous organic RFBs.An overview of electron transfer at the electrode-electrolyte interface is provided.The implications of electrode modification on the performance of redox flow batteries,with a particular focus on the anodic and cathodic half-cells separately,are then discussed.In each section,significant discrepancies surrounding the effects of electrode engineering are thoroughly examined and discussed.Finally,we have presented a comprehensive assessment along with our perspectives on the future trajectory.

Multiple-dimensioned defect engineering for graphite felt electrode of vanadium redox flow battery

The scarcity of wettability,insufficient active sites,and low surface area of graphite felt(GF)have long been suppressing the performance of vanadium redox flow batteries(VRFBs).Herein,an ultra-homogeneous multipledimensioned defect,including nano-scale etching and atomic-scale N,O codoping,was used to modify GF by the molten salt system.NH_(4)Cl and KClO_(3) were added simultaneously to the system to obtain porous N/O co-doped electrode(GF/ON),where KClO_(3) was used to ultra-homogeneously etch,and O-functionalize electrode,and NH4Cl was used as N dopant,respectively.GF/ON presents better electrochemical catalysis for VO_(2)+/VO_(2)+ and V3+/V2+ reactions than only O-functionalized electrodes(GF/O)and GF.The enhanced electrochemical properties are attributed to an increase in active sites,surface area,and wettability,as well as the synergistic effect of N and O,which is also supported by the density functional theory calculations.Further,the cell using GF/ON shows higher discharge capacity,energy efficiency,and stability for cycling performance than the pristine cell at 140 mA cm^(−2) for 200 cycles.Moreover,the energy efficiency of the modified cell is increased by 9.7% from 55.2% for the pristine cell at 260 mA cm^(−2).Such an ultra-homogeneous etching with N and O co-doping through“boiling”molten salt medium provides an effective and practical application potential way to prepare superior electrodes for VRFB.

Insights into the hydrogen evolution reaction in vanadium redox flow batteries:A synchrotron radiation based X-ray imaging study

The parasitic hydrogen evolution reaction(HER)in the negative half-cell of vanadium redox flow batteries(VRFBs)causes severe efficiency losses.Thus,a deeper understanding of this process and the accompanying bubble formation is crucial.This benchmarking study locally analyzes the bubble distribution in thick,porous electrodes for the first time using deep learning-based image segmentation of synchrotron X-ray micro-tomograms.Each large three-dimensional data set was processed precisely in less than one minute while minimizing human errors and pointing out areas of increased HER activity in VRFBs.The study systematically varies the electrode potential and material,concluding that more negative electrode potentials of-200 m V vs.reversible hydrogen electrode(RHE)and lower cause more substantial bubble formation,resulting in bubble fractions of around 15%–20%in carbon felt electrodes.Contrarily,the bubble fractions stay only around 2%in an electrode combining carbon felt and carbon paper.The detected areas with high HER activity,such as the border subregion with more than 30%bubble fraction in carbon felt electrodes,the cutting edges,and preferential spots in the electrode bulk,are potential-independent and suggest that larger electrodes with a higher bulk-to-border ratio might reduce HER-related performance losses.The described combination of electrochemical measurements,local X-ray microtomography,AI-based segmentation,and 3D morphometric analysis is a powerful and novel approach for local bubble analysis in three-dimensional porous electrodes,providing an essential toolkit for a broad community working on bubble-generating electrochemical systems.

Unraveling the coordination behavior and transformation mechanism of Cr^(3+) in Fe–Cr redox flow battery electrolytes

Currently,the iron chromium redox flow battery(ICRFB)has become a research hotspot in the energy storage field owing to its low cost and easily-scaled-up.However,the activity of electrolyte is still ambiguous due to its complicated solution environment.Herein,we performed a pioneering investigation on the coordination behavior and transformation mechanism of Cr^(3+)in electrolyte and prediction of impurity ions impact through quantum chemistry computations.Based on the structure and symmetry of electrostatic potential distribution,the activity of different Cr^(3+)complex ions is confirmed as[Cr(H2O)5Cl]^(2+)>[Cr(H2O)4Cl2]+>[Cr(H2O)6]^(3+).The transformation mechanism between[Cr(H2O)6]^(3+)and[Cr(H2O)5Cl]^(2+)is revealed.We find the metal impurity ions(especially Mg^(2+))can exacerbate the electrolyte deactivation by reducing the transformation energy barrier from[Cr(H2O)5Cl]^(2+)(24.38 kcal mol^(−1))to[Cr(H2O)6]^(3+)(16.23 kcal mol^(−1)).The solvent radial distribution and mean square displacement in different solvent environments are discussed and we conclude that the coordination configuration limits the diffusivity of Cr^(3+).This work provides new insights into the activity of electrolyte,laying a fundamental sense for the electrolyte in ICRFB.

Organized macro-scale membrane size reduction in vanadium redox flow batteries:Part 1.General concept

The high costs of the currently used membranes in vanadium redox flow batteries(VRFBs)contribute to the price of the vanadium redox flow battery systems and therefore limit the market share of the VRFBs.Here we report a detailed simulation and experimental studies on the effect of membrane reduction of single-cell VRFB.Different simulated designs demonstrate that a proposed centred and double-strip membrane coverage showed a promising performance.Experimental charge-discharge profile of different membrane size reduction,which showed good agreement with simulated data,suggests that the membrane size can comfortably be reduced by up to 20%without severe efficiency or discharge capacity loss.Long-term cycling of 80%centred membrane coverage showed improved capacity retention during the latter cycles with almost 1%difference in capacity and only 2%in energy efficiency when compared to the fully covered-membrane cell.The results hold great promise for the development of cheap RFB stacks and facilitate the way to develop new cell designs with non-overlapping electrodes geometry.Therefore,giving more flexibility to improve the overall performance of the system.

A review of electrolyte additives and impurities in vanadium redox flow batteries

As one of the most important components of the vanadium redox flow battery （VRFB）, the electrolyte can impose a significant impact on cell properties, performance and capital cost. In particular, the electrolyte composition will influence energy density, operating temperature range and the practical applications of the VRFB. Various approaches to increase the energy density and operating temperature range have been proposed. The presence of electrolyte impurities, or the addition of a small amount of other chemical species into the vanadium solution can alter the stability of the electrolyte and influence cell perfor- mance, operating temperature range, energy density, electrochemical kinetics and cost effectiveness. This review provides a detailed overview of research on electrolyte additives including stabilizing agents, im- mobilizing agents, kinetic enhancers, as well as electrolyte impurities and chemical reductants that can be used for different purposes in the VRFBs.

KHCO_3 activated carbon microsphere as excellent electrocatalyst for VO^(2+)/VO_2^+ redox couple for vanadium redox flow battery

In this paper,carbon microsphere prepared by hydrothermal treatment was activated by KHCO_3 at high temperature,and employed as the catalyst for VO^(2+)/VO_2^+redox reaction for vanadium redox flow battery(VRFB).Carbon microsphere can be etched by KHCO_3 due to the reaction between the pyrolysis products of KHCO_3 and carbon atoms.Moreover,KHCO_3 activation can bring many oxygen functional groups on carbon microsphere,further improving the wettability of catalyst and increasing the active sites.The electrocatalytic properties of carbon microsphere from hydrothermal treatment are improved by high temperature carbonization,and can further be enhanced by KHCO_3 activation.Among carbon microsphere samples,the VO^(2+)/VO_2^+redox reaction exhibits the highest electrochemical kinetics on KHCO_3 activated sample.The cell using KHCO_3 activated carbon microsphere as the positive catalyst demonstrates higher energy efficiency and larger discharge capacity,especially at high current density.The results reveal that KHCO_3 activated carbon microsphere is an efficient,low-cost carbon-based catalyst for VO^(2+)/VO_2^+redox reaction for VRFB system.

Modified carbon cloth as positive electrode with high electrochemical performance for vanadium redox flow batteries

Carbon cloth modified by hydrothermal treatment in ammonia water is developed as the positive electrode with high electrochemical performance for vanadium redox flow batteries. The SEM shows that the treatment has no obvious influence on the morphology of carbon cloth. XPS measurements indicate that the nitrogenous functional groups can be introduced on the surface of carbon cloth successfully. The electrochemical performance of V(IV)/V(V) redox couple on the prepared electrode is evaluated with cyclic voltammetry and linear sweep voltammetry measurements. The N-doped carbon cloth exhibits outstanding electrochemical activity and reversibility toward V(IV)/V(V) redox couple. The rate constant of V(IV)/V(V) redox reaction on carbon cloth can increase to 2.27 x 10(-4) cm/s from 1.47 x 10(-4) cm/s after nitrogen doping. The cell using N-doped carbon cloth as positive electrode has larger discharge capacity and higher energy efficiency compared with the cell using pristine carbon cloth. The average energy efficiency of the cell using N-doped carbon cloth for 50 cycles at 30 mA/cm(2) is 87.8%, 4.3% larger than that of the cell using pristine carbon cloth. It indicates that the N-doped carbon cloth has a promise application prospect in vanadium redox flow batteries. (C) 2016 Science Press and Dalian Institute of Chemical Physics, Chinese Academy of Sciences. Published by Elsevier B.V. and Science Press. All rights reserved.

A highly concentrated vanadium protic ionic liquid electrolyte for the vanadium redox flow battery

A protic ionic liquid is designed and implemented for the first time as a solvent for a high energy density vanadium redox flow battery.Despite being less conductive than standa rd aqueous electrolytes,it is thermally stable on a 100 ℃ temperature window,chemically stable for at least 60 days,equally viscous and dense with typical aqueous solvents and most importantly able to solubilize to 6 mol L^(-1) vanadium sulfate,thus increasing the VRFB energy density by a factor of 2.5.Electrochemical measurements revealed quasi-reversible redox transitions for both catholyte and anolyte at 25 ℃ while a proof-of-concept redox flow cell with the proposed electrolyte was tested for a total of 150 cycles at 25 ℃,showing an open circuit potential of 1.39 V and energy and coulombic efficiencies of 65% and 93%,respectively.What’s more,the battery can be equally cycled at 45℃ showing good thermal stability.This study underlines a new route to improve the energy-to-volume ratio of energy storage system.

Towards an all-vanadium redox flow battery with higher theoretical volumetric capacities by utilizing the VO^2＋/V^3＋ couple

An all-vanadium redox flow battery with V（IV） as the sole parent active species is developed by accessing the VO2＋/V3＋ redox couple. These batteries, referred to as V4RBs, possess a higher theoretical volumetric capacity than traditional VRBs. Copper ions were identified as an effective additive to boost the battery performance.

Stability of highly supersaturated vanadium electrolyte solution and characterization of precipitated phases for vanadium redox flow battery

The vanadium redox flow battery(VRFB)has been receiving great attention in recent years as one of the most viable energy storage technologies for large-scale applications.However,higher concentrations of vanadium species are required in the H_(2)O-H_(2)SO_(4) electrolyte in order to improve the VRFB energy density.This might lead to unwanted precipitation of vanadium compounds,whose nature has not been accurately characterized yet.For this purpose,this study reports the preparation ofⅤ^((Ⅱ)),ⅤV^((Ⅲ)),Ⅴ^((Ⅳ))andⅤ^((Ⅴ))supersaturated solutions in a 5 M H_(2)SO_(4)-H_(2)O electrolyte by an electrolytic method,from the only vanadium sulfate compound commercially available(VOSO_(4)).The precipitates obtained by ageing of the stirred solutions are representative of the solids that may form in a VRFB operated with such supersaturated solutions.The solid phases are identified using thermogravimetric analysis,X-ray diffraction and SEM.We report that dissolvedⅤ^((Ⅱ)),Ⅴ^((Ⅲ))andⅤ^((Ⅳ))species precipitate as crystals of VSO_(4),V_(2)(SO_(4))3 and VOSO_(4) hydrates and not in their anhydrous form;conversely V^((Ⅴ))precipitates as an amorphous V_(2) O_(5) oxide partially hydrated.The measured hydration degrees(respectively 1.5,9,3 and 0.26 mol of H_(2)O per mol of compound)might significantly affect the overall engineering of VRFB operating with high vanadium concentrations.

Sucrose pyrolysis assembling carbon nanotubes on graphite felt using for vanadium redox flow battery positive electrode

In the present paper, multi-walled carbon nanotubes（MWCNTs） are successfully assembled on graphite felt（GF） using sucrose pyrolysis method for the first time. The in situ formed pyrolytic carbon is chosen as the binder because it is essentially carbon materials as well as CNTs and GF which has a natural tendency to achieve high bonding strength and low contact resistance. The MWCNTs/GF electrode is demonstrated to increase surface area, reduce polarization, lower charge transfer resistance and improve energy conversion efficiency comparing with GF. This excellent electrochemical performance is mainly ascribed to the high electro-catalytic activity of MWCNTs and increasing surface area.

The effect of phosphate additive on the positive electrolyte stability of vanadium redox flow battery

The electrolyte is one of the most important components of vanadium redox flow battery （VRFB）. and its stability and solubility determines the energy density of a VRFB. The performance of current positive elec- trolyte is limited by the low stability of VO2＋ at a higher temperature. Phosphate is proved to be a very effective additive to improve the stability of VO2＋. Even though, the stabilizing mechanism is still not clear, which hinders the further development of VRFBs. In this paper, to clarify the effect of phosphate additive on the positive electrolyte stability, the hydration structures of VO2＋ cations and the reaction mechanisms of precipitation with or without phosphate in the supporting electrolyte of H_2SO_4 solutions were investigated in detail based on calculations of electronic structure. The stable configurations of com- plexes were optimized at the B3LYP/6-311 ＋ G（d,p） level of theory. The zero-point energies and Gibbs free energies for these complexes were further evaluated at the B3LYP/aug-cc-pVTZ level of theory. It shows that a structure of [VO_2（H_2O）_2]＋ surrounded by water molecules in H2S04 solution can be formed at the room temperature. With the temperature rises, [VO_2（H_2O）_2]＋ will lose a proton and form the interme- diate of VO（OH）_3, and the further dehydration among VO（OH）_3 molecules will create the precipitate of V_2O_5. When H_3PO_4 was added into electrolytes, the V-O-P bond-containing neutral compound could be formed through interaction between VO（OH）_3 and H_3PO_4, and the activation energy of forming the V-O-P bond-containing neutral compound is about 7 kcal tool-1 lower than that of the VO（OH）_3 dehydration, which could avoid the precipitation of V_2O_5 and improve the electrolyte stability.

Nanostructured N-doped carbon materials derived from expandable biomass with superior electrocatalytic performance towards V^(2+)/V^(3+) redox reaction for vanadium redox flow battery

Vanadium redox flow battery(VRFB)is one of the most promising large-scale energy storage systems,which ranges from kilowatt to megawatt.Nevertheless,poor electrochemical activity of electrode for two redox couples still restricts the extensive applications of VRFB.Compared with V^(2+)/V^(3+)redox reaction,V^(2+)/V^(3+)reaction plays a more significant role in voltage loss of VRFB owing to slow heterogeneous electron transfer rate.Herein,N-doped carbon materials derived from scaphium scaphigerum have been developed as negative electrocatalyst by hydrothermal carbonization and high-temperature nitridation treatments.The undoped carbon material hardly has electrocatalytic ability for V^(2+)/V^(3+)reaction.Based on this,N-doped carbon materials with urea as nitrogen source exhibit excellent electrocatalytic properties.And the material nitrided at 850°C(SSC/N-850)exhibits the best performance among those from700 to 1000℃.SSC/N-850 can accelerate the electrode process including V^(2+)/V^(3+)reaction and mass transfer of active ions due to the large reaction place,more active sites,and good hydrophilicity.The effect of catalyst on comprehensive performance of cell was evaluated.SSC/N-850 can improve the charge-discharge performance greatly.Utilization of SSC/N-850 can lessen the electrochemical polarization of cell,further resulting in increased discharge capacity and energy efficiency.Discharge capacity and energy efficiency increase by 81.5%and 9.8%by using SSC/N-850 as negative catalyst at 150 m A cm^(-2),respectively.Our study reveals that the developed biomass-derived carbon materials are the low-cost and efficient negative electrocatalyst for VRFB system.

Glucose-derived hydrothermal carbons as energy storage booster for vanadium redox flow batteries

Fabricating of high performance electrodes by a sustainable and cost effective method is essential to the development of vanadium redox flow batteries(VRFBs).In this work,an effective strategy is proposed to deposit carbon nanoparticles on graphite felts by hydrothermal carbonization method.This in-situ method minimizes the drop off and aggregation of carbon nanoparticles during electrochemical testing.Such integration of felts and hydrothermal carbons(HTC)produces a new electrode that combines the outstanding electrical conductivity of felts with the effective redox active sites provided by the HTC coating layer.The presence of the amorphous carbon layers on the felts is found to be able to promote the mass/charge transfer,and create oxygenated/nitrogenated active sites and hence enhances wettability.Consequently,the most optimized electrode based on a rational approach delivers an impressive electrochemical performance toward VRFBs in wide range of current densities from 200 to 500 mAcm^-2.The voltage efficiency(VE)of GFs-HTC is much higher than the VEs of the pristine GFs,especially at high current densities.It exhibits a 4.18 times increase in discharge capacity over the pristine graphite felt respectively,at a high current density of 400 mAcm^-2.The enhanced performance is attributed to the abundant active sites from amorphous hydrothermal carbon,which facilitates the fast electrochemical kinetics of vanadium redox reactions.This work evidences that the glucose-derived hydrothermal carbons as energy storage booster hold great promise in practical VRFBs application.

A bipolar verdazyl radical for a symmetric all-organic redox flow-type battery

A symmetric all-organic non-aqueous redox flow-type battery was investigated employing the neutral small molecule radical 3-phenyl-1,5-di-p-tolylverdazyl,which can be reversibly oxidized and reduced in one-electron processes,as the sole charge storage material.Cyclic voltammetry of the verdazyl radical in 0.5 M tetrabutylammonium hexa fluoro phosphate(TBAPF6)in acetonitrile revealed redox couples at-0.17 V and-1.15 V vs.Ag+/Ag,leading to a theoretical cell voltage of 0.98 V.From the dependence of peak currents on the square root of the scan rate,diffusion coefficients on the order of 4 x 10 6 cm2 s-1 were demonstrated.Cycling performance was assessed in a static cell employing a Tokoyuma AHA anion exchange membrane,with 0.04 M verdazyl as catholyte and anolyte in 0.5 M TBAPF6 in acetonitrile at a current density of 0.12 mA cm-2.Although coulombic efficiencies were good(94%-97%)throughout the experiment,the capacity faded gradually from high initial values of 93%of the theoretical discharge capacity to 35%by the 50th cycle.Voltage and energy efficiencies were 68%and 65%,respectively.Postcycling analysis by cyclic voltammetry revealed that decomposition of the active material with cycling is a leading cause of cell degradation.

A phosphotungstic acid coupled silica-Nafion composite membrane with significantly enhanced ion selectivity for vanadium redox flow battery

An ultra-high ion-selective Nafion composite membrane modified by phosphotungstic acid(PWA)coupled silica for vanadium redox flow battery(VRB)was constructed and prepared through solution casting.The composite membrane exhibits excellent proton conductivity and vanadium ions blocking property by incorporating the nanohybrid composed of silica and PWA into the Nafion ionomer.Simple tuning for the filling amount of the nanohybrid endows the obtained membranes preeminent vanadium barrier property including a minimum vanadium permeability of 3.13×10-7cm2min-1and a maximum proton conductivity of 0.081 S cm-1at 25°C.These indicate an ion selectivity of 2.59×105S min cm-3,which is 6.8times higher than that of recast Nafion(0.33×105S min cm-3).As a result,the VRB with the composite membrane shows superior battery performance containing a lower self-discharge rate,higher capacity retention and more robust cyclic stability compared with recast Nafion over a range of current densities from 40 to 100 m A cm-2.

Redox catalysts for aprotic Li-O2 batteries: Toward a redox flow system

Large-scale electrical energy storage with high energy density and round-trip efficiency is important to the resilience of power grids and the effective use of intermittent renewable energy such as solar and wind.Lithiumoxygen battery,due to its high energy density,is believed to be one of the most promising energy storage systems for the future.However,large overpotentials,poor cycling stability,and degradation of electrolytes and cathodes have been hindering the development of lithium-oxygen batteries.Numerous heterogeneous oxygen electrocatalysts have been investigated to lower the overpotentials and enhance the cycling stability of lithium-oxygen batteries.Unfortunately,the prevailing issues of electrode passivation and clogging remain.Over the past few years,redox mediators were explored as homogenous catalysts to address the issues,while only limited success has been achieved for these soluble catalysts.In conjunction with a flowing electrolyte system,a new redox flow lithium-oxygen battery(RFLOB)has been devised to tackle the aforementioned issues.The working mechanism and schematic processes will be elaborated in this review.In addition,the performance gap of RFLOB with respect to practical requirements will be analysed.With the above,we anticipate RFLOB would be a credible solution for the implementation of lithium-oxygen battery chemistry for the next generation energy storage.