Analytical solution to incident angle quasi-phase-matching engineering for second harmonic generation in a periodic-poled lithium niobate crystal

Phase matching or quasi-phase matching(QPM)is of significant importance to the conversion efficiency of second harmonic generation(SHG)in artificial nonlinear crystals like lithium niobate(LN)crystal or microstructured nonlinear crystals like periodic-poled lithium niobate(PPLN)crystals.In this paper,we propose and show that the incident angle of pump laser light can be harnessed as an alternative versatile tool to engineer QPM for high-efficiency SHG in a PPLN crystal,in addition to conventional means of period adjusting or temperature tuning.A rigorous model is established and analytical solution of the nonlinear conversion efficiency under the small and large signal approximation theory is obtained at different incident angles.The variation of phase mismatching and walk-off length with incident angle or incident wavelength are also explored.Numerical simulations for a PPLN crystal with first order QPM structure are used to confirm our theoretical predictions based on the exact analytical solution of the general large-signal theory.The results show that the narrow-band tunable SHG output covers a range of 532 nm–552.8 nm at the ideal incident angle from 0°to 90°.This theoretical scheme,fully considering the reflection and transmission at the air-crystal interface,would offer an efficient theoretical system to evaluate the nonlinear frequency conversion and help to obtain the maximum SHG conversion efficiency by selecting an optimum incident wavelength and incident angle in a specially designed PPLN crystal,which would be very helpful for the design of tunable narrow-band pulse nanosecond,picosecond,and femtosecond laser devices via PPLN and other microstructured LN crystals.

Spatio-temporal isolator in lithium niobate on insulator

In this contribution,we simulate,design,and experimentally demonstrate an integrated optical isolator based on spatiotemporal modulation in the thin-film lithium niobate on an insulator waveguide platform.We used two cascaded travelling wave phase modulators for spatiotemporal modulation and a racetrack resonator as a wavelength filter to suppress the sidebands of the reverse propagating light.This enabled us to achieve an isolation of 27 dB.The demonstrated suppression of the reverse propagating light makes such isolators suitable for the integration with III-V laser diodes and Erbium doped gain sections in the thin-film lithium niobate on the insulator waveguide platform.

Generation of hyperentangled photon pairs based on lithium niobate waveguide

Generation of hyperentangled photon pairs is investigated based on the lithium niobate straight waveguide.We propose to use the nonlinear optical process of spontaneous parametric down-conversion(SPDC)and a well-designed lithium niobate waveguide structure to generate a hyperentangled(in the polarization dimension and the energy-time dimension)two-photon state.By performing numerical simulations of the waveguide structure and calculating the possible polarization states,joint spectral amplitudes(JSA),and joint temporal amplitudes(JTA)of the generated photon pair,we show that the generated photon pair is indeed hyperentangled in both the polarization dimension and the energy-time dimension.

Degenerate polarization entangled photon source based on a single Ti-diffusion lithium niobate waveguide in a polarization Sagnac interferometer

Combining a Ti-diffusion periodically poled lithium niobate(PPLN)waveguide with a Sagnac interferometer,two opposite directions type-II spontaneous parametric down conversions(SPDC)occur coherently and yield a high brightness,high stability polarization entanglement source.The source produces degenerate photon pairs at 1540.4 nm with a brightness of B=(1.36±0.03)×10^(6) pairs/(s·nm·m W).We perform quantum state tomography to reconstruct the density matrix of the output state and obtain a fidelity of F=0.983±0.001.The high brightness and phase stability of our waveguide source enable a wide range of quantum information experiments operating at a low pump power as well as hold the advantage in mass production which can promote the practical applications of quantum technologies.

Continuous-wave mid-infrared intracavity singly resonant optical parametric oscillator based on periodically poled lithium niobate

This paper reports a continuous-wave （CW） mid-infrared intracavity singly resonant optical parametric oscillator based on periodically poled lithium niobate （PPLN） pumped by a diode-end-pumped CW Nd：YVO4 laser. Considering the thermal lens effects, it adopted an optical ballast lens and the near-concentric cavity for better operation. At the PPLN＇s grating period of 28.5 μm and the temperature of 140℃, the maximum idler output power of 155 mW at 3.86 μm has been achieved when the 808 nm pump power is 8.5 W, leading to an optical-to-optical conversion efficiency of 1.82%.

High efficiency continuous-wave tunable signal output of an intracavity singly resonant optical parametric oscillator based on periodically poled lithium niobate

In this paper we report on a continuous-wave （CW） intracavity singly resonant optical parametric oscillator （ICSRO） based on periodically poled LiNbO3 （PPLN） pumped by a diode-end-pumped CW Nd：YVO4 laser. Considering the thermal lens effects and diffraction loss, an optical ballast lens and a near-concentric cavity are adopted for better operation. Through varying the grating period and the temperature, the tunable signal output from 1406 nm to 1513 nm is obtained. At a PPLN grating period of 29 pm and a temperature of 413 K, a maximum signal output power of 820 mW at 1500 nm is achieved when the 808 nm pump power is 10.9 W, leading to an optical-to-optical conversion efficiency of 7.51%.

First Synthesis of Zirconia-pillared Layered Lanthanum Niobate

A zirconia-pillared layered lanthanum niobate was prepared by first preswelling layered HLaNb2O7 with n-hexadecylamine(n-C16H33NH2), then further reacting with zirconyl chloride aqueous solution, and finally calcining the resultant solid product in air. The obtained new material has an interlayer spacing of 1.36nm, and a high thermal stability above 700 degrees C.

Three-wavelength generation from cascaded wavelength conversion in monolithic periodically poled lithium niobate

Tunable coherent emission is generated in a single-pass, cascaded wavelength conversion process from mode-locked laser-pumped monolithic periodically poled lithium niobate（PPLN）. Three ranges of wavelength, including visible output from 628 nm to 639 nm, near-infrared output from 797 nm to 816 nm, and mid-infrared output from 3167 nm to 3459 nm,were obtained from the monolithic PPLN, which consists of a 10-mm section for 532-nm-pumped optical parametric generation（OPG） and a 7-mm section for 1064-nm-pumped sum frequency generation（SFG）. A pump-to-signal conversion efficiency of 23.4% for OPG at 50°C and a quantum efficiency of 26.2% for SFG at 200°C were obtained.

Modeling and Validation of Indentation Depth of Abrasive Grain into Lithium Niobate Wafer by Fixed-Abrasive Lapping

The prediction of indentation depth of abrasive grain in hydrophilic fixed-abrasive(FA)lapping is crucial for controlling material removal rate and surface quality of the work-piece being machined.By applying the theory of contact mechanics,a theoretical model of the indentation depth of abrasive grain was developed and the relationships between indentation depth and properties of contact pairs and abrasive back-off were studied.Also,the average surface roughness(Ra)of lapped wafer was approximately calculated according to the obtained indentation depth.To verify the rationality of the proposed model,a series of lapping experiments on lithium niobate(LN)wafers were carried out,whose average surface roughness Ra was measured by atomic force microscope(AFM).The experimental results were coincided with the theoretical predictions,verifying the rationality of the proposed model.It is concluded that the indentation depth of the fixed abrasive was primarily affected by the applied load,wafer micro hardness and pad Young′s modulus and so on.Moreover,the larger the applied load,the more significant the back-off of the abrasive grain.The model established in this paper is helpful to the design of FA pad and its machining parameters,and the prediction of Ra as well.

The two photorefractive centres in iron doped nearly stoichiometric lithium niobate crystals

This paper investigates the photorefractive properties of iron doped lithium niobate with different [Li]/[Nb] ratios The experimental results show two photorefractive centres for iron doped near-stoichiometric lithium niobate crystal Besides Fe^2＋ and Fe^3＋ ions, small polarons and bipolarons are considered as another photoactive centre.

Growth and Holographic Storage Properties of Sc, Fe Co-Doped Lithium Niobate Crystals

The holographic storage properties of Fe （0.03% （mass fraction） Fe2O3）：LiNbO3 doped with Sc at different levels （0, 1%, 2%, 3%） were investigated. The Sc threshold concentration in Fe：LiNbO3 was implied to be about 3% （mole fraction） because O-H vibration absorption peak of Sc （3%）：Fe：LiNbO3 was at 3508 cm^-1, compared with 3484 cm^-1 of crystals with lower Sc doping level. Sc（3%）：Fe：LiNbO3 exhibited higher optical damage resistance ability. The threshold intensity （wavelength 488 nm） of Sc （3%）：Fe：LiNbO3 was 2.2 ×10^2 W ·cm^-2, two orders of masnitude higher than that of Fe：LiNbO3. Holographic storage properties of the crystals were determined in an extraordinary polarized laser of wavelength 632.8 nm by a two-wave coupling method. It was found that in terms of holographic storage properties, the optimal doping concentration of Sc was 2% （mole fraction） among this crystal series.

Four-channel CWDM transmitter chip based on thin-film lithium niobate platform

Multi-lane integrated transmitter chips are key components in future compact optical modules to realize high-speed optical interconnects.Thin-film lithium niobate(TFLN)photonics have emerged as a promising platform for achieving high-performance chip-scale optical systems.Combining a coarse wavelength-division multiplexing(CWDM)devices using fabrication-tolerant angled multimode interferometer structure and high-performance electro-optical modulators,we demonstrate monolithic on-chip four-channel CWDM transmitter on the TFLN platform for the first time.The four-channel CWDM transmitter enables high-speed transmissions of 100 Gb/s data rate per wavelength channel(i.e.,an aggregated date rate of 400 Gb/s).

Photonic devices based on thin-film lithium niobate on insulator

Lithium niobate on insulator(LNOI)is rising as one of the most promising platforms for integrated photonics due to the high-index-contrast and excellent material properties of lithium niobate,such as wideband transparency from visible to mid-infrared,large electro-optic,piezoelectric,and second-order harmonic coefficients.The fast-developing micro-and nanostructuring techniques on LNOI have enabled various structure,devices,systems,and applications.In this contribution,we review the latest developments in this platform,including ultra-high speed electro-optic modulators,optical frequency combs,opto-electro-mechanical system on chip,second-harmonic generation in periodically poled LN waveguides,and efficient edge coupling for LNOI.

Properties of Local Structure Surrounding Eu^(3+)Ion in Various Niobate-Silicate Glasses

A Series of niobate silicate glasses doped with Eu 3+ ions were prepared. The emission, phonon side band spectra, fluorescence line narrowing spectroscopy and fluorescence lifetimes in these glasses were studied. The intensity parameters and crystal field parameter of Eu 3+ were obtained. The results indicate that the intensity ratio of the electric dipole to magnetic dipole transition and the intensity parameter Ω 2 increase with the increasing concentration of Nb 2O 5, indicating that the symmetry becomes lower, the Eu O bonds become stronger and the covalency of Eu O bond increases. The value of B 20 decreases with the increasing concentration of Nb 2O 5, indicating that the distance between the Eu 3+ ion and oxygen decreases and the Eu O bond becomes strong, corresponding to the results of the former. As the concentration of Nb 2O 5 increases, the electron phonon coupling becomes stronger, thus the nonradiative transition rate of 5D 0 becomes larger and the lifetime of 5D 0 becomes shorter.

Effect of thickness variations of lithium niobate on insulator waveguide on the frequency spectrum of spontaneous parametric down-conversion

We study the effect of waveguide thickness variations on the frequency spectrum of spontaneous parametric downconversion in the periodically-poled lithium niobate on insulator(LNOI)waveguide.We analyze several variation models and our simulation results show that thickness variations in several nanometers can induce distinct effects on the central peak of the spectrum,such as narrowing,broadening,and splitting.We also prove that the effects of positive and negative variations can be canceled and thus lead to a variation-robust feature and an ultra-broad bandwidth.Our study may promote the development of on-chip photon sources in the LNOI platform,as well as opens up a way to engineer photon frequency state.

Supercontinuum Generation in Lithium Niobate Ridge Waveguides Fabricated by Proton Exchange and Ion Beam Enhanced Etching

We report on the fabrication of the lO-mm-long lithium niobate ridge waveguide and its supercontinuum gen- eration at near-visible wavelengths （around 800hm）. The waveguides are fabricated by a combination of MeV copper ion implantation followed by wet etching in a proton exchanged lithium niobate planar waveguide. Using a mode-locked Ti：sapphire laser with a central wavelength of 800nm, the generated broadest supereontinuum through the ridge waveguides spans 302 nm （at -30 dB points）, from 693 to 995 nm. Temporal coherence proper- ties of the supercontinuum are experimentally studied by a Michelson interferometer and the coherence length of the broadest supercontinuum is measured to be 5.2 μm. Our results offer potential for a compact and integrated supercontinuum source for applications including bio-imaging, spectroscopy and optical communication.

STRUCTURAL AND FERROELECTRIC PROPERTIES OF A NEW NIOBATE: Sr_6FeNb_9O_(30)

A new niobate Sr6FeNb9O30 was synthe-sized in the ternary system SrO-Fe2O3-Nb2O5 for the first time. The crystal structure was determined by X-ray diffraction and dielectric measurement, and it belongs to orthorhombic tungsten bronze structure at room tem perature with unit cell parameters a=1.7554(1) nm, b=1.7534 (1) nm, c=0. 77870(6)nm. Dielectric constants measure-ment show that Sr6FeNb9O30 has two phase transitions, paraelectric to ferroelectric at 185 C and ferroelectric to ferroelastic at 70 ℃.

Synthesis and X-ray Powder Diffraction Characterization of A New Niobate Crystal NaBa_2Li_(0.6)Nb_(4.8)Zn_(0.2)O_(15)

A new niobate compound was synthesized for the first time in Na2 O-BaO-Li2 O-ZnO-Nb2 O5 system by solid state reaction. The acw compound was studied by X-ray diffraction, electron probe, X-ray microanalysis, chemical analysis and SEM. The result of X-ray powder diffraction shows that NaBa2 Li0.6 Nb4.8 Zn0.2 O15 belongs to orthorhombic tungsten bronze structure, with space group Pba2（ 32 ） and lattice parameters a = 12.6115（2）A, b = 12.4981（2）A, C = 3.9479（3）A. The X-ray powder diffraction lines of the compoutid were well indexed.

Synthesis and Characteristic of a New Niobate:Ba_5NaCo_(0.5)Nb_(9.5)O_(30)

A new niobate crystal was synthesized for the first time in BaO-Na2O-Co2O3 -Nb2O5 system by solid state reaction and the flux method. The new compound was studied by X-ray diffraction, electron probe. N-ray microanalysis, chemical analysis and SEM. The result of the X-ray diffraction shows that Ba5 NaCo0.5 Nb9.5 OK) belongs to tetragonal tungsten bronze structure with space group P4bm( 100) and lattice parameters a = b = 12.4453(2) A, c = 3. 9770 (3) A and Z = 1. The structure of the compound is different from that ofBa4Na2Nb10O30

Synthesis and Characteristic of a New Niobate: Ba_5NaCr_(0.5)Nb_(9.5)_O_(30)

A new niobate crystal was synthesized for the first time in BaO-NaO-Cr-2O-3-Nb-2O-3 system by the solid state reaction and the flux method. The new compound was studied by X-ray diffraction, electron probe, X-ray microanalysis, chemical analysis and SEM. The result of X-ray powder diffraction shows that Ba-5NaCr- 0.5Nb- 9.5O- 30 belongs to the tetragonal tungsten bronze structure, with space group P-4 bm(100) and lattice parameters a=b=12.4450(2)A°,c=3.9931(2)A° and Z=1. The X-ray powder diffraction lines of the compound were well indexed.