Structural Stress Monitoring and FEM Analysis of the Cutting Operation of the Main Bracket of A Semi-Submersible Platform

For a semi-submersible platform in repair, the eight old main brackets which connect columns with pontoons need to be replaced by new ones. In order to ensure the safety of the cutting operation of the old main bracket and calculate the initial stress condition of new main bracket, the structural stress monitoring of eight key spots is carried out, and then the calibrated finite element model is established according to the field monitoring results. Before cutting the main bracket and all associated structures, eight rectangular rosettes were installed, and a tailored cutting scheme was proposed to release the initial stress, in which the main bracket and associated column and pontoon plates were partly cut. During the cutting procedure, the strains of the monitoring spots were measured, and then the structural stress of the monitored spots were obtained. The stress variation characteristics at different spots during the initial cutting operation were shown and the initial stress condition of the monitored spots was figured out. The loading and support conditions of the semi-submersible platform were calibrated based on the measured initial stress condition, which made the finite element model more credible. The stress condition with the main bracket and associated structures being entirely cut out is analyzed by the Finite Element Method (FEM), which demonstrates the cutting operation to be safe and feasible. In addition, the calibrated finite element model can be used to calculate the initial stress condition of the new main bracket, which will be very helpful for the long-term stress monitoring on the main bracket.

Bending and stress analysis of polymeric composite plates reinforced with functionally graded graphene platelets based on sinusoidal shear-deformation plate theory

The bending and stress analysis of a functionally graded polymer composite plate reinforced with graphene platelets are studied in this paper.The governing equations are derived by using principle of virtual work for a plate which is rested on Pasternak’s foundation.Sinusoidal shear deformation theory is used to describe displacement field.Four different distribution patterns are employed in our analysis.The analytical solution is presented for a functionally graded plate to investigate the influence of important parameters.The numerical results are presented to show the deflection and stress results of the problem for four employed patterns in terms of geometric parameters such as number of layers,weight fraction and two parameters of Pasternak’s foundation.

Thermoelastic Stress Analysis of a Finite Structure Containing an Asymmetrical-Oriented, Arbitrarily-Shaped Hole

Stresses, particularly those at geometric discontinuities, influence the structural integrity of engineering components. Motivated by the prevalence of complicated-shaped perforated components, the objective of this paper is to demonstrate the ability to stress analyze loaded finite members containing asymmetrical, irregularly-shaped cutouts. Recognizing the difficulties in obtaining purely theoretical or numerical solutions for these situations, the paper presents an expeditious means of experimentally stress analyzing such structures. Processing the load-induced temperature information with a series representation of a stress function provides the independent stress components reliably full-field, including on the edge of a hole. The stresses satisfy equilibrium and strains satisfy compatibility. In addition to being able to stress analyze complicated shapes using real, rather than complex variables, the technique is significant in which it smooths the recorded thermal information, is widely applicable, and requires neither differentiating the measured data nor knowing the elastic properties or external boundary conditions. The latter is extremely important since the external loading is often unknown in practice. That the approach provides the independent stresses is also significant since fatigue analyses and strength criteria typically necessitate knowing the individual components of stress. Present results are supported by those from a finite element analysis, strain gage measurements and load equilibrium.

General displacement arch-cantilever element method for stress analysis of arch dam

Based on the general displacement method and the basic hypothesis of the trial load method, a new advanced trial load method, the general displacement arch-cantilever element method, was proposed to derive the transformation relation of displacements and loads between the surface nodes and middle plane nodes. This method considers the nodes on upstream and downstream surfaces of the arch dam to be exit nodes （master nodes）, and the middle plane nodes to be slave nodes. According to the derived displacement and load transformation matrices, the equilibrium equation treating the displacement of middle plane nodes as a basic unknown variable is transformed into one that treats the displacement of upstream and downstream nodes as a basic unknown variable. Because the surface nodes have only three degrees of freedom （DOF）, this method can be directly coupled with the finite element method （FEM）, which is used for foundation simulation to analyze the stress of the arch dam with consideration of dam-foundation interaction. Moreover, using the FEM, the nodal load of the arch dam can be easily obtained. Case studies of a typical cylindrical arch dam and the Wudongde arch dam demonstrate the robustness and feasibility of the proposed method.

Analysis of interlaminar stress and nonlinear dynamic response for composite laminated plates with interfacial damage

By considering the effect of interfacial damage and using the variation principle, three-dimensional nonlinear dynamic governing equations of the laminated plates with interfacial damage are derived based on the general sixdegrees-of-freedom plate theory towards the accurate stress analysis. The solutions of interlaminar stress and nonlinear dynamic response for a simply supported laminated plate with interfacial damage are obtained by using the finite difference method, and the results are validated by comparison with the solution of nonlinear finite element method. In numerical calculations, the effects of interfacial damage on the stress in the interface and the nonlinear dynamic response of laminated plates are discussed.

ANALYSIS OF INTER-LAMINAR STRESSES FOR COMPOSITE LAMINATED PLATE WITH INTERFACIAL DAMAGE

A constitutive model for composite laminated plates with the damage effect of the intra-layers and inter-laminar interface is presented. The model is based on the general six-degrees-of-freedom plate theory, the discontinuity of displacement on the interfaces are depicted by three shape functions, which are formulated according to solutions satisfying three equilibrium equations, By using the variation principle, the three-dimensional non-linear equilibrium differential equations of the laminated plates with two different damage models are derived. Then, considering a simply supported laminated plate with damage, an analytical solution is presented using finite difference method to obtain the inter-laminar stresses.

Size-dependent effect on biaxial and shear nonlinear buckling analysis of nonlocal isotropic and orthotropic micro-plate based on surface stress and modified couple stress theories using differential quadrature method

The size-dependent effect on the biaxial and shear nonlinear buckling analysis of an isotropic and orthotropic micro-plate based on the surface stress, the modified couple stress theory （MCST）, and the nonlocal elasticity theories using the differential quadrature method （DQM） is presented. Main advantages of the MCST over the classical theory （CT） are the inclusion of the asymmetric couple stress tensor and the consideration of only one material length scale parameter. Based on the nonlinear von Karman assumption, the governing equations of equilibrium for the micro-classical plate consid- ering midplane displacements are derived based on the minimum principle of potential energy. Using the DQM, the biaxial and shear critical buckling loads of the micro-plate for various boundary conditions are obtained. Accuracy of the obtained results is validated by comparing the solutions with those reported in the literature. A parametric study is conducted to show the effects of the aspect ratio, the side-to-thickness ratio, Eringen＇s nonlocal parameter, the material length scale parameter, Young＇s modulus of the surface layer, the surface residual stress, the polymer matrix coefficients, and various boundary conditions on the dimensionless uniaxial, biaxial, and shear critical buckling loads. The results indicate that the critical buckling loads are strongly sensitive to Eringen＇s nonlocal parameter, the material length scale parameter, and the surface residual stress effects, while the effect of Young＇s modulus of the surface layer on the critical buckling load is negligible. Also, considering the size dependent effect causes the increase in the stiffness of the orthotropic micro-plate. The results show that the critical biaxial buckling load increases with an increase in G12/E2 and vice versa for E1/E2. It is shown that the nonlinear biaxial buckling ratio decreases as the aspect ratio increases and vice versa for the buckling amplitude. Because of the most lightweight micro-composite materials with high strength/weight and stiffness/weight ratios, it is anticipated that the results of the present work are useful in experimental characterization of the mechanical properties of micro-composite plates in the aircraft industry and other engineering applications.

Stress Analysis of New Type Pre-Stressed Anchor Bearing Plate Combining Stamping with Welding Forming and Its Anchorage Zone

An anchor bearing plate transfers the anchoring force from anchor plate to the concrete and the pre-stress is formed in the concrete structure. Currently, the main type of anchor bearing plate is cast iron. It is brittle during transportation and tension process. This paper presents a new type of anchor bearing plate combined stamping with welding forming. The structure of the new type anchor bearing plate is introduced. The stress states of the anchor bearing plate and anchorage zone under work are studied. Various specifications of anchor bearing plate are studied by ANSYS finite element analysis software following the AASHTO specification. The analysis results are compared with the results of the same type of OVM round-shaped anchor plate. The study results show that the new pre-stressed anchor plates combined stamping with welding forming are feasible and more sturdy which can meet the engineering demand.

Analysis of the Behavior of a Square Plate in Free Vibration by FEM in Ansys

In the realization of mechanical structures, achieving stability and balance is a problem commonly encountered by engineers in the field of civil engineering, mechanics, aeronautics, biomechanics and many others. The study of plate behavior is a very sensitive subject because it is part of the structural elements. The study of the dynamic behavior of free vibration structures is done by modal analysis in order to calculate natural frequencies and modal deformations. In this paper, we present the modal analysis of a thin rectangular plate simply supported. The analytical solution of the differential equation is obtained by applying the method of separating the variables. We are talking about the exact solution of the problem to the limit values. However, numerical methods such as the finite element method allow us to approximate these functions with greater accuracy. It is one of the most powerful computational methods for predicting dynamic response in a complex structure subject to arbitrary boundary conditions. The results obtained by MEF through Ansys 15.0 are then compared with those obtained by the analytical method.

FEM Analysis and Simulation for Prediction of Press-Forming and Spring Back of Spiral Plates

In order to provide technical supports for designing a new type of spiral plate forming machine, FEM analysis and simulation were carried out based on pressing tests. Deformation, stress distribution, residual stress and spring back of the spiral plate were calculated. Relationships between the spiral pitch to inclination angle of the punch and die, material properties and thickness of the plate were analyzed. A data converter was developed and effectively used in the analysis. The results of FEM analysis and simulation have been applied to design the spiral plate forming machines.

Finite element analysis on temperature field and residual stress of welding assembly for I-beam and end-plate

Based on full scale model of 1-beam and end-plate welding assembly with medium plate, welding temperature field and residual stress were simulated, infrared thermometers were employed to measure the real-time temperature Jbr verification purposes. Results show that the measured thermal cycle curves match well with the simulation result. Simulation results of welding residual stress indicate that the values of longitudinal and transverse stress on the upper surface of the plate are higher than the normal stress; higher tensile stresses exist at the end of the web weld toes and in the central area of the flange weld toes. The dangerous zones are located at the central areas of weld toes of the flange welds and near weld toes of the web welds.

Mixed finite element and differential quadrature method for free and forced vibration and buckling analysis of rectangular plates

This paper presents a combined application of the finite element method （FEM） and the differential quadrature method （DQM） to vibration and buckling problems of rectangular plates. The proposed scheme combines the geometry flexibility of the FEM and the high accuracy and efficiency of the DQM. The accuracy of the present method is demonstrated by comparing the obtained results with those available in the literature. It is shown that highly accurate results can be obtained by using a small number of finite elements and DQM sample points. The proposed method is suitable for the problems considered due to its simplicity and potential for further development.

Finite element analysis of controlling the TC4 thin plate weldment wave-like deformation by welding with impacting rotation

The new technology of welding with impacting rotation is put forward to decrease the wave-like deformation of the TC4 thin plate weldment. The thermal stress and strain are vital to understand the mechanism of controlling the wave-like deformation. In order to know the development of internal thermal stress and strain, finite element method is utilized for- the stress and strain are difficult to be investigated by experimental methods during the welding process. Temperature field, thermal stress evolution and distortion of thin plate are compared with the test results such as weld thermal cycle, residual stress sectioning measurement, and the deflection of the thin plate respectively. By the finite element analysis and test results verification, the meehaaism of the technology to control the wave-like deformation is brought forward, non-uniform thermal elastic strain between compressive plastic region and elastic extensive region is diminished by a certain amount of extensive plastic deformation by welding with impacting rotation process.

PRACTICAL ANALYSIS OF ORTHOTROPIC PLATES SUPPORTED IN ONE DIRECTION

A practical method for computing the one-way rectangular orthotropicplate(isotropic plate as a special case)is suggested in this paper.The supported condi-tions in two opposite edges may be simply supported,continuous or supportednonsymmetrically and the other two opposite edges are slide-supported or free.A series ofsimplified formulas are given for calculating the bending moments along the cross section(loaded section),in which the acting point of the concentrated load or the center of a rec-tangular uniform load is located.The valid range and accuracy of these formulas were stud-ied and the approximate results were examined and compared extensively with those by thetriangular series solution or finite element method.

Stress Analysis of the Glass Bulb of 35-inch(V)120°Color Picture Tube

A simulation of the stress analysis for a vacuum glass bulb of 35 inch (V) 120° Color Picture Tube(CPT) has been developed. It is shown that extra large deflection angle Color Picture Tube is viable. Increase in the deflection angle will shorten the de

Finite element analysis of anchor plates using non-coaxial models

The non-coaxial model simulating the non-coincidence between the principal stresses and the principal plastic strain rates is employed within the framework of finite element method（FEM） to predict the behaviors of anchors embedded in granular material.The non-coaxial model is developed based on the non-coaxial yield vertex theory,and the elastic and conventional coaxial plastic deformations are simulated by using elasto-perfectly plastic Drucker-Prager yield function according to the original yield vertex theory.Both the horizontal and vertical anchors with various embedment depths are considered.Different anchor shapes and soil friction and dilation angles are also taken into account.The predictions indicate that the use of non-coaxial models leads to softer responses,compared with those using conventional coaxial models.Besides,the predicted ultimate pulling capacities are the same for both coaxial and non-coaxial models.The non-coaxial influences increase with the increasing embedment depths,and circular anchors lead to larger non-coaxial influences than strip anchors.In view of the fact that the design of anchors is mainly determined by their displacements,ignoring the non-coaxiality in finite element numerical analysis can lead to unsafe results.

FEM analyses for influences of stress-chemical solution on THM coupling in dual-porosity rock mass

The models of stress corrosion, pressure solution and flee-face dissolution/precipitation were introduced. Taking a hypothetical nuclear waste repository in an unsaturated dual-porosity rock mass as the calculation objective, four cases were designed 1） the fracture aperture is a function of stress corrosion, pressure solution and free-face dissolution/precipitation; 2） the fracture aperture changes with stress corrosion and pressure solution; 3） the fracture aperture changes with pressure solution and free-face dissolution/precipitation; 4） the fracture aperture is only a function of pressure solution, and the matrix porosity is also a function of stress in these four cases. Then, the corresponding two-dimensional FEM analyses for the coupled thermo-hydro-mechanical processes were carried out. The results show that the effects of stress corrosion are more prominent than those of pressure solution and free-face dissolution/precipitation, and the fracture aperture and relevant permeability caused by the stress corrosion arc only about 1/5 and 1/1000 of the corresponding values created by the pressure solution and free-face dissolution/precipitation, respectively Under the action of temperature field from released heat, the negative pore and fracture pressures in the computation domain rise continuously, and are inversely proportional to the sealing of fracture aperture. The vector fields of flow velocity of fracture water in the cases with and without considering stress corrosion are obviously different. The differences between the magnitudes and distributions of stresses within the rock mass are very small in all cases.

Three-Dimensional Thermo-Elastic-Plastic Finite Element Method Modeling for Predicting Weld-Induced Residual Stresses and Distortions in Steel Stiffened-Plate Structures

The objective of the present paper is to develop nonlinear finite element method models for predicting the weld-induced initial deflection and residual stress of plating in steel stiffened-plate structures. For this purpose, three-dimensional thermo-elastic-plastic finite element method computations are performed with varying plate thickness and weld bead length (leg length) in welded plate panels, the latter being associated with weld heat input. The finite element models are verified by a comparison with experimental database which was obtained by the authors in separate studies with full scale measurements. It is concluded that the nonlinear finite element method models developed in the present paper are very accurate in terms of predicting the weld-induced initial imperfections of steel stiffened plate structures. Details of the numerical computations together with test database are documented.

Three-Dimensional Stress Concentration Factor in Finite Width Plates with a Circular Hole

The three-dimensional stress concentration factor (SCF) at the edge of elliptical and circular holes in infinite plates under remote tension has been extensively investigated considering the variations of plate thickness, hole dimensions and material properties, such as the Poisson’s coefficient. This study employs three dimensional finite element modeling to numerically investigate the effect of plate width on the behavior of the SCF across the thickness of linear elastic isotropic plates with a through-the-thickness circular hole under remote tension. The problem is governed by two geometric non-dimensional parameters, i.e., the plate half-width to hole radius (W/r) and the plate thickness to hole radius (B/r) ratios. It is shown that for thin plates the value of the SCF is nearly constant throughout the thickness for any plate width. As the plate thickness increases, the point of maximum SCF shifts from the plate middle plane and approaches the free surface. When the ratio of plate half-width to hole radius (W/r) is greater than four, the maximum SCF was observed to approximate the theoretical value determined for infinite plates. When the plate width is reduced, the maximum SCF values significantly increase. A polynomial curve fitting was employed on the numerical results to generate empirical formulas for the maximum and surface SCFs as a function of W/r and B/r. These equations can be applied, with reasonable accuracy, to practical problems of structural strength and fatigue, for instance.

基于FEM-NN-MCS模拟应力集中系数的结构可靠性分析

在机械结构可靠性分析中,由于应力集中系数的预测精度直接影响可靠性分析与计算结果,可见应力集中系数(SCF)是最主要的参数之一。采用理论方法通常很难获得应力集中系数,因此目前主要采用实验方法。采用实验方法尽管可以较精确地获得应力集中系数的数值解,但不能直接给出基本随机变量和应力集中系数之间的关系,为进一步的可靠性分析带来困难。作为可供选择途径,使用有限元法(FEM)获得应力集中系数的数据库,采用神经网络方法模拟应力集中系数,用BP神经网络建立结构的输入和输出关系,在此模型上,将Monte Carlo和可靠性理论相结合,提出了解决应力集中情况下的结构可靠性问题的分析方法。