Ray tracing of turning wave in elliptically anisotropic media with an irregular surface

Seismic ray tracing in anisotropic media with irregular surface is crucial for the exploration of the fine crustal structure. Elliptically anisotropic medium is the type of anisotropic media with only four independent elastic parameters. Usually, this medium can be described by only the vertical phase velocity and the horizontal phase velocity for seismic wave propagation. Model parameteri- zation in this study is described by flexible triangular grids, which is beneficial for the description of irregular surface with high degree of approximation. Both the vertical and horizontal phase velocities are defined in the triangular grids, respectively, which are used for the description of phase velocity distribution everywhere in the model by linear interpolation. We develop a shooting ray tracing method of turning wave in the elliptically anisotropic media with irregular surface. Runge-Kutta method is applied to solve the partial differential equation of seismic ray in elliptically anisotropic media. Linearly modified method is used for adjusting emergent phase angles in the shooting scheme. Numerical tests demonstrate that ray paths coincide well with analytical trajectories in trans- versely homogeneous elliptically anisotropic media. Seis- mic ray tracing results in transversely inhomogeneous elliptically anisotropic media demonstrate that our method is effective for further first-arrival tomography in ellipti- cally anisotropic media with an irregular surface.

Irregular surface of carotid atherosclerotic plaque is associated with ischemic stroke: a magnetic resonance imaging study

Objective To determine the association between the irregularity of carotid plaque surface using multidimensional magnetic resonance imaging(MRI) of ipsilateral acute cerebral infarction(ACI) cases. Methods Patients with recent cerebrovascular symptoms(stroke or transient ischemic attack < 2 weeks) and atherosclerotic plaque in at least one carotid artery were diagnosed by B-mode ultrasound imaging(intima-media thickness ≥ 1.5 mm) and recruited for the present study. Irregular surface was defined when plaque surface was uneven with high and low fluctuation or plaque with surface ulceration. The irregularity of carotid plaque surface was determined on axial or oblique images alone(single-dimension) and on both axial images and oblique images(multidimensions), separately. Univariate and multivariate logistic regression analyses were performed to calculate the odds ratio(OR) and the corresponding 95% CI of the irregular plaque surface in discriminating the presence of ipsilateral ACI. Results A total of 217 included subjects(mean age: 60.7 ± 10.2 years, 149 men) were recruited and 89(41.0%), 88(40.6%) and 118(54.4%) of them exhibited irregular plaque surface on axial, oblique and multidimensional MR images, respectively. The OR of irregularity of the plaque surface was determined by multidimensional MRI to be 5.88(95% CI: 3.16–10.96, P < 0.001) in discriminating the presence of ipsilateral ACI. Following adjustment for clinical confounding factors, this association remained statistically significant(OR = 5.65, 95% CI: 2.53–12.60, P < 0.001). The analysis included further adjustment for the presence of lipid-rich necrotic core, intraplaque hemorrhage and stenosis and the results included that this association also remained statistically significant(OR = 6.08, 95% CI: 2.52–14.68, P < 0.001). Conclusions The irregular plaque surface was determined by multidimensional MRI as an independent indicator for ipsilateral acute cerebral infarction.

Inner wrinkling control in hydrodynamic deep drawing of an irregular surface part using drawbeads

Inner wrinkling phenomenon is more likely to develop during hydrodynamic deep drawing （HDD） of complicated component-forms due to the higher demand for controlling deformation sequences. Aiming at the problems in control of inner wrinkling for an irregular surface part featured with both concavity and convex, this research proposes an optimal design method of drawbead parameters to change the material flow. According to theoretical analysis of the mechanism of inner wrinkling, optimizing cavity pressure only is unreasonable to form a wrinkle-free deep-drawn part, so semi-circular drawbeads are employed. The effects of layout and height of drawbeads on forming results are discussed, and a process window is established based on evaluation indicators including the anti-wrinkle coefficient and the minimum wall thickness. Experiments are carried out to validate the process window, and the wall thickness and the wrinkle height are measured and compared with numerical findings. The results show that the anti-wrinkle ability of drawbeads weakens with increasing oblique angle and distance from the die center, while the wall thickness increases with increasing oblique angle and distance, and the inner wrinkling can be completely suppressed by drawbeads arranged in zones I and II with optimum penetration.

Multiple extended target tracking algorithm based on Gaussian surface matrix

In this paper, we consider the problem of irregular shapes tracking for multiple extended targets by introducing the Gaussian surface matrix（GSM） into the framework of the random finite set（RFS） theory. The Gaussian surface function is constructed first by the measurements, and it is used to define the GSM via a mapping function. We then integrate the GSM with the probability hypothesis density（PHD） filter, the Bayesian recursion formulas of GSM-PHD are derived and the Gaussian mixture implementation is employed to obtain the closed-form solutions. Moreover, the estimated shapes are designed to guide the measurement set sub-partition, which can cope with the problem of the spatially close target tracking. Simulation results show that the proposed algorithm can effectively estimate irregular target shapes and exhibit good robustness in cross extended target tracking.

Use of generated artificial road profiles in road roughness evaluation

In the evaluation of road roughness and its effects on vehicles response in terms of ride quality, loads induced on pavement, drivers＇ comfort, etc., it is very common to generate road profles based on the equation provided by ISO 8608 standard, according to which it is possible to group road surface profiles into eight different classes. However, real profiles are significantly different from the artificial ones because of the non-stationary fea- ture of the first ones and the not full capability of the ISO 8608 equation to correctly describe the frequency content of real road profiles. In this paper, the international roughness index, the frequency-weighted vertical acceleration awz according to ISO 2631, and the dynamic load index are applied both on artificial and real profiles, highlighting the different results obtained. The analysis carried out in this work has highlighted some limitation of the ISO 8608 approach in the description of performance and conditions of real pavement profiles. Furthermore, the different sensitivity of the various indices to the fitted power spectral density parameters is shown, which should be taken into account when performing analysis using artificial profiles.