Fatigue tests were made on a vibration machine using specially designed specimens to investi- gate the initiation and propagation features of short fatigue cracks in a weld metal.The spec- imens were triangular in sha...Fatigue tests were made on a vibration machine using specially designed specimens to investi- gate the initiation and propagation features of short fatigue cracks in a weld metal.The spec- imens were triangular in shape so that when loaded as a cantilever beam the surface tensile stress is constant.Test results show that short fatigue cracks mainly originate from slip bands within ferrite grains.The development of short fatigue cracks is marked by a gradual increase in crack density with fatigue cycles.Coalescence of short cracks leads to crack propagation and the crack path is predominantly transgranular.展开更多
There is a remarkable difference in stress distribution between a specimen and a plate removed from the specimen.The plate presents a uniform stress distribution whereas the specimen presents a non-uniform stress dist...There is a remarkable difference in stress distribution between a specimen and a plate removed from the specimen.The plate presents a uniform stress distribution whereas the specimen presents a non-uniform stress distribution.Firstly,the real stress distributions in plates with thickness of 30,40 and 50 mm and then in the specimens were obtained through simulation and X-ray surface stress measurement.Secondly,in order to study the impact of specimens shapes and processing ways on the results accuracy,two irregular shapes (parallelogram and trapezoid) and two processing ways (saw and electron discharge machining (EDM)) were compared and analyzed by simulation and experiment using layer removal method,then the specimen effects on measurement results were evaluated.The results show that:1) the non-uniform stress distribution characteristics of the specimen near the surface of the cut is significant,the range of non-uniform stress distribution is approximately one-thickness distance away from the cut,and it decreases gradually along the depth;2) In order to ensure the stability in the results,it is suitable to take the specimen plane size 2-3 times of its thickness;3) Conventional processing methods have little effect on experimental results and the average deviation is less than 5%.展开更多
In order to provide parameters for numerical analyses of the huge Three-Gorge concrete dam (2309 m long by 175 m height), complete tensile stress-deformation curves for large-size plain concrete specimens were measure...In order to provide parameters for numerical analyses of the huge Three-Gorge concrete dam (2309 m long by 175 m height), complete tensile stress-deformation curves for large-size plain concrete specimens were measured and studied by per-forming uniaxial tensile tests on large-size unnotched specimens (250 mm×250 mm×1400 mm). The specimens were prepared with the three-graded-aggregate materials provided by the client of the Three-Gorge project. To prevent a failure occurring near the ends of the unnotched specimens, both the ends of each specimen (450 mm in length) were cast using a higher-strength concrete than the middle part (i.e., active part). Tensile tests were completed on a specially-designed tensile testing machine, which can be easily re-assembled to accommodate different-size specimens. To make the specimens fail stably, a cyclic loading scheme was adopted after the peak strength was reached. Four of five tests in this study were successful, and four complete tensile stress-deformation curves were obtained. It was found that the post-peak curve of the large-size specimens used in this study is more gradual than those for the small-size specimens reported in the literature.展开更多
A new formula is obtained to calculate dynamic stress intensity factors of the three-point bending specimen containing a single edge crack in this study. Firstly, the weight function for three-point bending specimen c...A new formula is obtained to calculate dynamic stress intensity factors of the three-point bending specimen containing a single edge crack in this study. Firstly, the weight function for three-point bending specimen containing a single edge crack is derived from a general weight function form and two reference stress intensity factors, the coefficients of the weight function are given. Secondly, the history and distribution of dynamic stresses in uncracked three-point bending specimen are derived based on the vibration theory. Finally~ the dynamic stress intensity factors equations for three-pointing specimen with a single edge crack subjected to impact loadings are obtained by the weight function method. The obtained formula is verified by the comparison with the numerical results of the finite element method （FEM）. Good agreements have been achieved. The law of dynamic stress intensity factors of the three-point bending specimen under impact loadings varing with crack depths and loading rates is studied.展开更多
In the simulation of rupture processes of seismic sources by using either numerical method or rock mechanics experiments, improper setting of the specimen size will influence the stress field near the faults. In this ...In the simulation of rupture processes of seismic sources by using either numerical method or rock mechanics experiments, improper setting of the specimen size will influence the stress field near the faults. In this study, 2D finite element method (FEM) was used to calculate the stress field of rock specimens in different sizes with fixed-size elliptic holes. The calculated stress field was compared with analytic solution for elliptic-hole problem in an infinite medium. Numerical results showed that boundary effect of a rock specimen with an elliptic hole on stress field under uniaxial compression cannot be neglected. Critical aspect ratio of the specimen is about 3:2, and critical ratio of distance between the tip of the hole and the border of specimen (d) to the major axis of the elliptic hole (l) is about 7.3. Numerical analysis on rock specimen size can provide theoretical reference for rock specimen experiments, and it is also helpful for setting of model sizes in numerical simulations of fault movement.展开更多
In the present paper, three dimensional analyses of some general constraint parameters and fracture parameters near the crack tip of Mode I CT specimens in two different thicknesses are carried out by employing ADINA ...In the present paper, three dimensional analyses of some general constraint parameters and fracture parameters near the crack tip of Mode I CT specimens in two different thicknesses are carried out by employing ADINA program. The results reveal that the constraints along the thickness direction are obviously separated into two parts: the keeping similar high constraint field (Z1) and rapid reducing constraints one(Z2). The two fields are experimentally confiremed to correspond to the smooth region and the shear lip on the fracture face respectively. So the three dimensional stress structure of Mode I specimens can be derived through discussing the two fields respectively. The distribution of the Crack Tip Opening Displacement (CTOD) along the thickness direction and the three dimensional distribution of the void growth ratio (Vg) near the crack tip are also obtained. The two fracture parameters are in similar trends along the thickness direction, and both of them can reflect the effect of thickness and that of the loading level to a certain degree.展开更多
The stress distribution of notched specimen of brittle material under a plane pressure was studied using a photoelastic meth- od,When elastic deformation appeared inside the specimen,the force transferred by dowel par...The stress distribution of notched specimen of brittle material under a plane pressure was studied using a photoelastic meth- od,When elastic deformation appeared inside the specimen,the force transferred by dowel part was triangular transverse force and frictional force on the upper surface of the sample.The quantity of the frictional force was about 31 percent of transverse force.The stress inside the sample was linear along the central cross section of the sample and there was maximum tensile stress σ_y at the tip of the notch.Basing on shearing stress deviation method,the tensile stress σ_y,σ_x and shearing stress τ_(xy) at the cen- tral sections and four adjacent cross sections were calculated.The result pointed out that σ_x and τ_(xy) were smaller than σ_y.There- fore,σ_y was the main factor for crack formation and propagation.展开更多
Anti symmetric four point bending specimens with different thickness, without and with guiding grooves, were used to conduct Mode Ⅱ fracture test and study the effect of specimen thickness on Mode Ⅱ fracture toughne...Anti symmetric four point bending specimens with different thickness, without and with guiding grooves, were used to conduct Mode Ⅱ fracture test and study the effect of specimen thickness on Mode Ⅱ fracture toughness of rock. Numerical calculations show that the occurrence of Mode Ⅱ fracture in the specimens without guiding grooves (when the inner and outer loading points are moved close to the notch plane) and with guiding grooves is attributed to a favorable stress condition created for Mode Ⅱ fracture, i.e. tensile stress at the notch tip is depressed to be lower than the tensile strength or to be compressive stress, and the ratio of shear stress to tensile stress at notch tip is very high. The measured value of Mode Ⅱ fracture toughness K ⅡC decreases with the increase of the specimen thickness or the net thickness of specimen. This is because a thick specimen promotes a plane strain state and thus results in a relatively small fracture toughness.展开更多
Crack propagation processes in specially prepared concrete discs and rectangular specimens containing a single cylindrical hole or multiple holes of varying diameters have been studied both experimentally and numerica...Crack propagation processes in specially prepared concrete discs and rectangular specimens containing a single cylindrical hole or multiple holes of varying diameters have been studied both experimentally and numerically. In this research, the cracks coalescence paths in Brazilian disc and rectangular specimens made from rock-like material containing multi-holes are investigated. These concrete specimens are specially prepared from an appropriate mixture of Portland Pozzolana Cement （PPC）, fine sands, and water. The pre-holed Brazilian discs and rectangular specimens are experimentally tested under compression. The breakage load in the ring type disc specimens containing an axial hole with varying diameters is measured and the distribution of the induced lateral stress is obtained. The mechanism of cracks propagation in the wall of the ring type specimens is also stud- ied. In the case of multi-hole Brazilian disc and rectangular specimens, the cracks propagation and cracks coalescence are also investigated. These experiments are numerically modeled by a modified higher order displacement discontinuity method. It has been shown that the corresponding experimental and numerical results are in good agreement with each other. The results presented in this research vali date the accuracy and applicability of these crack analyses procedures.展开更多
The stress characteristics in the anisotropic bicrystal and tricrystal specimens were analyzed using the anisotropic elastic model, orthotropic Hill's model and rate-dependent crystallographic model. The finite el...The stress characteristics in the anisotropic bicrystal and tricrystal specimens were analyzed using the anisotropic elastic model, orthotropic Hill's model and rate-dependent crystallographic model. The finite element analysis results show that non-uniform stresses are induced by the grain boundary. For bicrystal specimens in different crystallographic orientations, there exist stress concentrations and high stress gradients nearby the boundaries. The activation and slipping of the slip systems are dependent on the crystallographic orientations of the grains and also on the relative crystallographic orientations of the two adjoining grains. For the tricrystal specimens, there is not always any stress concentrations in the triple junction, and the concentration degree depends on the relative crystallographic orientations of the three grains. Different from the bicrystal specimens, there may be or no stress concentration in the vicinity of grain boundaries for the tricrystal specimens, which depends on the relative crystallographic orientations of the three grains. The stress concentration near to the grain boundaries and triple junction can be high enough for the local plastic deformation, damage and voiding or cracking even when the whole specimen is still under the elastic state. It can be further concluded that homogeneous assumption for polycrystalline materials is not suitable to study the detailed meso- or micro-mechanisms for damaging and fracturing.展开更多
There is evidence showing that increased levels of oxidative stress and C-reactive protein (CRP) might be associated with obesity, hypertension, atherosclerosis and other cardiovascular diseases. This study was undert...There is evidence showing that increased levels of oxidative stress and C-reactive protein (CRP) might be associated with obesity, hypertension, atherosclerosis and other cardiovascular diseases. This study was undertaken to investigate possible relationships among plasma 8-iso-prostaglandin F2α (8-iso-PG F2α: an index of oxidative stress), high-sensitivity (hs)-CRP and membrane fluidity (a reciprocal value of microviscosity) in hypertensive and normotensive men using an electron spin resonance (ESR)-method. The order parameter (S) for the spin-label agents (5-nitroxide stearate) of red blood cell (RBC) membranes in the ESR spectra was significantly higher in hypertensive men than in normotensive men, indicating that membrane fluidity was decreased in hypertensive men. Both plasma 8-iso-PG F2α and hs-CRP levels were significantly increased in hypertensive men compared with normotensive men. In addition, plasma plasma 8-iso-PG F2α levels were correlated with plasma hs-CRP levels. In contrast, plasma nitric oxide (NO)-metabolites were lower in hypertensive men than in normotensive men, and inversely correlated with plasma 8-iso-PG F2α and hs-CRP. The order parameter(S) of RBCs was correlated with plasma 8-iso-PG F2α and plasma hs-CRP, and inversely correlated with plasma NO-metabolites, suggesting that reduced membrane fluidity of RBCs might be associated with increased oxidative stress, inflammation and endothelial dysfunction. Multivariate regression analysis also showed that, after adjusting for general risk factors, both plasma 8-iso-PG F2α and hs-CRP were significant determinants of membrane fluidity of RBCs. The ESR suggests that associations of oxidative stress and inflammation might have a close correlation with impaired rheologic behavior of RBCs and microcirculatory dysfunction in hypertensive men.展开更多
文摘Fatigue tests were made on a vibration machine using specially designed specimens to investi- gate the initiation and propagation features of short fatigue cracks in a weld metal.The spec- imens were triangular in shape so that when loaded as a cantilever beam the surface tensile stress is constant.Test results show that short fatigue cracks mainly originate from slip bands within ferrite grains.The development of short fatigue cracks is marked by a gradual increase in crack density with fatigue cycles.Coalescence of short cracks leads to crack propagation and the crack path is predominantly transgranular.
基金Project(2005CB623708) supported by the National Basic Research Program of China
文摘There is a remarkable difference in stress distribution between a specimen and a plate removed from the specimen.The plate presents a uniform stress distribution whereas the specimen presents a non-uniform stress distribution.Firstly,the real stress distributions in plates with thickness of 30,40 and 50 mm and then in the specimens were obtained through simulation and X-ray surface stress measurement.Secondly,in order to study the impact of specimens shapes and processing ways on the results accuracy,two irregular shapes (parallelogram and trapezoid) and two processing ways (saw and electron discharge machining (EDM)) were compared and analyzed by simulation and experiment using layer removal method,then the specimen effects on measurement results were evaluated.The results show that:1) the non-uniform stress distribution characteristics of the specimen near the surface of the cut is significant,the range of non-uniform stress distribution is approximately one-thickness distance away from the cut,and it decreases gradually along the depth;2) In order to ensure the stability in the results,it is suitable to take the specimen plane size 2-3 times of its thickness;3) Conventional processing methods have little effect on experimental results and the average deviation is less than 5%.
文摘In order to provide parameters for numerical analyses of the huge Three-Gorge concrete dam (2309 m long by 175 m height), complete tensile stress-deformation curves for large-size plain concrete specimens were measured and studied by per-forming uniaxial tensile tests on large-size unnotched specimens (250 mm×250 mm×1400 mm). The specimens were prepared with the three-graded-aggregate materials provided by the client of the Three-Gorge project. To prevent a failure occurring near the ends of the unnotched specimens, both the ends of each specimen (450 mm in length) were cast using a higher-strength concrete than the middle part (i.e., active part). Tensile tests were completed on a specially-designed tensile testing machine, which can be easily re-assembled to accommodate different-size specimens. To make the specimens fail stably, a cyclic loading scheme was adopted after the peak strength was reached. Four of five tests in this study were successful, and four complete tensile stress-deformation curves were obtained. It was found that the post-peak curve of the large-size specimens used in this study is more gradual than those for the small-size specimens reported in the literature.
基金supported by the China Aviation Industry Corporation I Program (No.ATPD-1104-02)the Science Foundation of Nanjing University of Science and Technology (No.2010GJPY026)
文摘A new formula is obtained to calculate dynamic stress intensity factors of the three-point bending specimen containing a single edge crack in this study. Firstly, the weight function for three-point bending specimen containing a single edge crack is derived from a general weight function form and two reference stress intensity factors, the coefficients of the weight function are given. Secondly, the history and distribution of dynamic stresses in uncracked three-point bending specimen are derived based on the vibration theory. Finally~ the dynamic stress intensity factors equations for three-pointing specimen with a single edge crack subjected to impact loadings are obtained by the weight function method. The obtained formula is verified by the comparison with the numerical results of the finite element method （FEM）. Good agreements have been achieved. The law of dynamic stress intensity factors of the three-point bending specimen under impact loadings varing with crack depths and loading rates is studied.
基金National Natural Science Foundation of China (40234042).
文摘In the simulation of rupture processes of seismic sources by using either numerical method or rock mechanics experiments, improper setting of the specimen size will influence the stress field near the faults. In this study, 2D finite element method (FEM) was used to calculate the stress field of rock specimens in different sizes with fixed-size elliptic holes. The calculated stress field was compared with analytic solution for elliptic-hole problem in an infinite medium. Numerical results showed that boundary effect of a rock specimen with an elliptic hole on stress field under uniaxial compression cannot be neglected. Critical aspect ratio of the specimen is about 3:2, and critical ratio of distance between the tip of the hole and the border of specimen (d) to the major axis of the elliptic hole (l) is about 7.3. Numerical analysis on rock specimen size can provide theoretical reference for rock specimen experiments, and it is also helpful for setting of model sizes in numerical simulations of fault movement.
文摘In the present paper, three dimensional analyses of some general constraint parameters and fracture parameters near the crack tip of Mode I CT specimens in two different thicknesses are carried out by employing ADINA program. The results reveal that the constraints along the thickness direction are obviously separated into two parts: the keeping similar high constraint field (Z1) and rapid reducing constraints one(Z2). The two fields are experimentally confiremed to correspond to the smooth region and the shear lip on the fracture face respectively. So the three dimensional stress structure of Mode I specimens can be derived through discussing the two fields respectively. The distribution of the Crack Tip Opening Displacement (CTOD) along the thickness direction and the three dimensional distribution of the void growth ratio (Vg) near the crack tip are also obtained. The two fracture parameters are in similar trends along the thickness direction, and both of them can reflect the effect of thickness and that of the loading level to a certain degree.
文摘The stress distribution of notched specimen of brittle material under a plane pressure was studied using a photoelastic meth- od,When elastic deformation appeared inside the specimen,the force transferred by dowel part was triangular transverse force and frictional force on the upper surface of the sample.The quantity of the frictional force was about 31 percent of transverse force.The stress inside the sample was linear along the central cross section of the sample and there was maximum tensile stress σ_y at the tip of the notch.Basing on shearing stress deviation method,the tensile stress σ_y,σ_x and shearing stress τ_(xy) at the cen- tral sections and four adjacent cross sections were calculated.The result pointed out that σ_x and τ_(xy) were smaller than σ_y.There- fore,σ_y was the main factor for crack formation and propagation.
基金TheNationalNaturalScienceFoundationofChina (No :496 72 16 4)
文摘Anti symmetric four point bending specimens with different thickness, without and with guiding grooves, were used to conduct Mode Ⅱ fracture test and study the effect of specimen thickness on Mode Ⅱ fracture toughness of rock. Numerical calculations show that the occurrence of Mode Ⅱ fracture in the specimens without guiding grooves (when the inner and outer loading points are moved close to the notch plane) and with guiding grooves is attributed to a favorable stress condition created for Mode Ⅱ fracture, i.e. tensile stress at the notch tip is depressed to be lower than the tensile strength or to be compressive stress, and the ratio of shear stress to tensile stress at notch tip is very high. The measured value of Mode Ⅱ fracture toughness K ⅡC decreases with the increase of the specimen thickness or the net thickness of specimen. This is because a thick specimen promotes a plane strain state and thus results in a relatively small fracture toughness.
基金sponsored by Iran’s National Elites Foundation (INEF)
文摘Crack propagation processes in specially prepared concrete discs and rectangular specimens containing a single cylindrical hole or multiple holes of varying diameters have been studied both experimentally and numerically. In this research, the cracks coalescence paths in Brazilian disc and rectangular specimens made from rock-like material containing multi-holes are investigated. These concrete specimens are specially prepared from an appropriate mixture of Portland Pozzolana Cement （PPC）, fine sands, and water. The pre-holed Brazilian discs and rectangular specimens are experimentally tested under compression. The breakage load in the ring type disc specimens containing an axial hole with varying diameters is measured and the distribution of the induced lateral stress is obtained. The mechanism of cracks propagation in the wall of the ring type specimens is also stud- ied. In the case of multi-hole Brazilian disc and rectangular specimens, the cracks propagation and cracks coalescence are also investigated. These experiments are numerically modeled by a modified higher order displacement discontinuity method. It has been shown that the corresponding experimental and numerical results are in good agreement with each other. The results presented in this research vali date the accuracy and applicability of these crack analyses procedures.
基金The work was financially supported by the National Natural Science Foundation of China(Grant No.50005016)the Chinese Aviation Research Foundation.
文摘The stress characteristics in the anisotropic bicrystal and tricrystal specimens were analyzed using the anisotropic elastic model, orthotropic Hill's model and rate-dependent crystallographic model. The finite element analysis results show that non-uniform stresses are induced by the grain boundary. For bicrystal specimens in different crystallographic orientations, there exist stress concentrations and high stress gradients nearby the boundaries. The activation and slipping of the slip systems are dependent on the crystallographic orientations of the grains and also on the relative crystallographic orientations of the two adjoining grains. For the tricrystal specimens, there is not always any stress concentrations in the triple junction, and the concentration degree depends on the relative crystallographic orientations of the three grains. Different from the bicrystal specimens, there may be or no stress concentration in the vicinity of grain boundaries for the tricrystal specimens, which depends on the relative crystallographic orientations of the three grains. The stress concentration near to the grain boundaries and triple junction can be high enough for the local plastic deformation, damage and voiding or cracking even when the whole specimen is still under the elastic state. It can be further concluded that homogeneous assumption for polycrystalline materials is not suitable to study the detailed meso- or micro-mechanisms for damaging and fracturing.
文摘There is evidence showing that increased levels of oxidative stress and C-reactive protein (CRP) might be associated with obesity, hypertension, atherosclerosis and other cardiovascular diseases. This study was undertaken to investigate possible relationships among plasma 8-iso-prostaglandin F2α (8-iso-PG F2α: an index of oxidative stress), high-sensitivity (hs)-CRP and membrane fluidity (a reciprocal value of microviscosity) in hypertensive and normotensive men using an electron spin resonance (ESR)-method. The order parameter (S) for the spin-label agents (5-nitroxide stearate) of red blood cell (RBC) membranes in the ESR spectra was significantly higher in hypertensive men than in normotensive men, indicating that membrane fluidity was decreased in hypertensive men. Both plasma 8-iso-PG F2α and hs-CRP levels were significantly increased in hypertensive men compared with normotensive men. In addition, plasma plasma 8-iso-PG F2α levels were correlated with plasma hs-CRP levels. In contrast, plasma nitric oxide (NO)-metabolites were lower in hypertensive men than in normotensive men, and inversely correlated with plasma 8-iso-PG F2α and hs-CRP. The order parameter(S) of RBCs was correlated with plasma 8-iso-PG F2α and plasma hs-CRP, and inversely correlated with plasma NO-metabolites, suggesting that reduced membrane fluidity of RBCs might be associated with increased oxidative stress, inflammation and endothelial dysfunction. Multivariate regression analysis also showed that, after adjusting for general risk factors, both plasma 8-iso-PG F2α and hs-CRP were significant determinants of membrane fluidity of RBCs. The ESR suggests that associations of oxidative stress and inflammation might have a close correlation with impaired rheologic behavior of RBCs and microcirculatory dysfunction in hypertensive men.
