Crystallization in polymer systems actually is a process that transfers the entangled melts into a semi-crystalline layered structure. Whether or not a chain disentangles may result in different crystallization mechan...Crystallization in polymer systems actually is a process that transfers the entangled melts into a semi-crystalline layered structure. Whether or not a chain disentangles may result in different crystallization mechanism. When compared to the crystal thickness (d(c)), the volume occupied by the chain in the melts i.e., the radius of gyration (R-g), plays a very important role in polymer crystallization. When d(c) less than or equal to R-g, crystallization does not necessitate a chain disentangling. The entanglements are just shifted into the amorphous regions. However, as d(c)>R-g, i.e., as the crystal thickness gets larger than the radius of gyration of the chain in the melt, it becomes necessary for a chain to disentangle. Then a change of crystallization mechanism occurs. Such change has been experimentally observed in the crystallization of poly(I-butene). A change in the crystal morphologies from spherulite to quadrangle, is seen via PLM, as crystallization temperatures increase. Even more, such a change is molecular weight dependent, and shifts to lower temperature as molecular weight decreases. There exists a jump of crystal thickness and crystallinity associated with morphological change, as seen via SAXS. A change of crystallization kinetics and crystallinity is further evidenced via dilatometry. The unique feature of P1b crystallization has been discussed based on the radius of gyration of chain in the melt (R-g), and very good agreement is obtained.展开更多
The morphology of solution-cast thin films of isotactic poly(1-butene)(iPB-1) was investigated by using transmission electron microscopy(TEM) and electron diffraction techniques. The crystalline morphology of the solu...The morphology of solution-cast thin films of isotactic poly(1-butene)(iPB-1) was investigated by using transmission electron microscopy(TEM) and electron diffraction techniques. The crystalline morphology of the solution-cast films of iPB-1 is greatly dependent on the preparation temperature. When the temperature is in the range of 90—100 ℃, metastable form Ⅱ spherulities are formed. Stable iPB-1 form Ⅰ crystals are achieved directly when the preparation temperature is higher(105—115 ℃).展开更多
Stereospecific polymerization of polar olefins has always been an attractive but challenging project because the Lewis basic polar groups of monomers are usually poisonous to the Lewis acidic metal centers of the cata...Stereospecific polymerization of polar olefins has always been an attractive but challenging project because the Lewis basic polar groups of monomers are usually poisonous to the Lewis acidic metal centers of the catalysts. In this contribution,thiophene-fused cyclopentadienyl scandium complexes 1-3 were successfully synthesized. Combined with alkylaluminium and organoborate, these complexes showed extremely low activity and no selectivity for 1-hexene polymerization. Surprisingly,highly stereo-selective coordination polymerization of unprotected polar 4-methylthio-1-butene has been achieved in high activity for the first time under the same polymerization conditions. High-molecular-weight(M_n=110×10~3) and perfectly syndiotactic(rrrr>99%) poly(4-methylthio-1-butene)(P(MTB)) was afforded. Thus the methylthio-group-assisted mechanism that the unmasked methylthio group promoted the polymerization through σ-π chelation to the active scandium center together with the vinyl group was proposed. Moreover, the methylsulfonyl functionalized syndiotactic poly(1-butene) was also easily prepared by the oxidation of P(MTB). These results provided a new route for the synthesis of functionalized stereo-regular polyolefins.展开更多
基金This work was supported by the Deutsche Forschungsgemeinschall and der Chemischen Industrierate, Alexander von Humboldt Stiffeng and the China National Distinguished Young Investigator Fund (No. 29925413).
文摘Crystallization in polymer systems actually is a process that transfers the entangled melts into a semi-crystalline layered structure. Whether or not a chain disentangles may result in different crystallization mechanism. When compared to the crystal thickness (d(c)), the volume occupied by the chain in the melts i.e., the radius of gyration (R-g), plays a very important role in polymer crystallization. When d(c) less than or equal to R-g, crystallization does not necessitate a chain disentangling. The entanglements are just shifted into the amorphous regions. However, as d(c)>R-g, i.e., as the crystal thickness gets larger than the radius of gyration of the chain in the melt, it becomes necessary for a chain to disentangle. Then a change of crystallization mechanism occurs. Such change has been experimentally observed in the crystallization of poly(I-butene). A change in the crystal morphologies from spherulite to quadrangle, is seen via PLM, as crystallization temperatures increase. Even more, such a change is molecular weight dependent, and shifts to lower temperature as molecular weight decreases. There exists a jump of crystal thickness and crystallinity associated with morphological change, as seen via SAXS. A change of crystallization kinetics and crystallinity is further evidenced via dilatometry. The unique feature of P1b crystallization has been discussed based on the radius of gyration of chain in the melt (R-g), and very good agreement is obtained.
文摘The morphology of solution-cast thin films of isotactic poly(1-butene)(iPB-1) was investigated by using transmission electron microscopy(TEM) and electron diffraction techniques. The crystalline morphology of the solution-cast films of iPB-1 is greatly dependent on the preparation temperature. When the temperature is in the range of 90—100 ℃, metastable form Ⅱ spherulities are formed. Stable iPB-1 form Ⅰ crystals are achieved directly when the preparation temperature is higher(105—115 ℃).
基金supported by the National Natural Science Foundation of China (21674108, 21634007, 21774118)the Science and Technology Development Project of Jilin Province (20190201067JC)
文摘Stereospecific polymerization of polar olefins has always been an attractive but challenging project because the Lewis basic polar groups of monomers are usually poisonous to the Lewis acidic metal centers of the catalysts. In this contribution,thiophene-fused cyclopentadienyl scandium complexes 1-3 were successfully synthesized. Combined with alkylaluminium and organoborate, these complexes showed extremely low activity and no selectivity for 1-hexene polymerization. Surprisingly,highly stereo-selective coordination polymerization of unprotected polar 4-methylthio-1-butene has been achieved in high activity for the first time under the same polymerization conditions. High-molecular-weight(M_n=110×10~3) and perfectly syndiotactic(rrrr>99%) poly(4-methylthio-1-butene)(P(MTB)) was afforded. Thus the methylthio-group-assisted mechanism that the unmasked methylthio group promoted the polymerization through σ-π chelation to the active scandium center together with the vinyl group was proposed. Moreover, the methylsulfonyl functionalized syndiotactic poly(1-butene) was also easily prepared by the oxidation of P(MTB). These results provided a new route for the synthesis of functionalized stereo-regular polyolefins.
