Wings-FDY一步法生产ITY的工艺研究

通过设备改造及工艺优化,成功实现了ITY在Wings-FDY设备上一步法生产。研究结果表明:风压设定为30 Pa,调整纺丝/卷绕上油比例为6:4,预热辊温度51℃,定型辊温度124℃,拉伸倍数3.2,卷绕速度3550 m/min时,ITY 148dtex/108f纺况稳定,物理指标均匀,满足客户定制化的产品需求。

Non-probabilistic reliability method and reliability-based optimal LQR design for vibration control of structures with uncertain-but-bounded parameters

Uncertainty is inherent and unavoidable in almost all engineering systems. It is of essential significance to deal with uncertainties by means of reliability approach and to achieve a reasonable balance between reliability against uncertainties and system performance in the control design of uncertain systems. Nevertheless, reliability methods which can be used directly for analysis and synthesis of active control of structures in the presence of uncertainties remain to be developed, especially in non-probabilistic uncertainty situations. In the present paper, the issue of vibration con- trol of uncertain structures using linear quadratic regulator （LQR） approach is studied from the viewpoint of reliabil- ity. An efficient non-probabilistic robust reliability method for LQR-based static output feedback robust control of un- certain structures is presented by treating bounded uncertain parameters as interval variables. The optimal vibration con- troller design for uncertain structures is carried out by solv- ing a robust reliability-based optimization problem with the objective to minimize the quadratic performance index. The controller obtained may possess optimum performance un- der the condition that the controlled structure is robustly re- liable with respect to admissible uncertainties. The proposed method provides an essential basis for achieving a balance between robustness and performance in controller design ot uncertain structures. The presented formulations are in the framework of linear matrix inequality and can be carried out conveniently. Two numerical examples are provided to illustrate the effectiveness and feasibility of the present method.

STABILITY ANALYSIS OF PILLARS IN CONSIDERATION OF RHEOLOGICAL BEHAVIOUR OF ROCK

The mined-out area of a gypsum mine is right un-derneath civil constructions of a township, threatening the safety of the latter. To evaluate the long-term stability of the mined-out area, a visco-elastic plastic finite element analysis is carried out,combined with in situ measurements. The visco-elastic plastic coefficients have been determined through laboratory rock creep tests. Noticing the lim-itations of conventional element failure criteria,the authors proposed a new method to evaluate the stability of the element.i. e. ,by a si-multaneous control of the energy density and strain of the element. Computation showed that at stable state,one third of the pillars are in the visco-plastic state,the rest of the pillars ,the roof and floor are still in the visco-elastic state. The stress concentration coefficient at the boundary of pillars and roof is 2. 3,and the maximum verti-cal stress on the pillars is 11. 8 MPa. Data measured on site are con-sistent with the computation results, indicating that the proposed cal-culation method is correct. Therefore, the current mined-out area is stable,and the dimension of pillars is reasonable. The next-step ex-traction work should be carried out maintaining the current parame-ters,with only a moderate increase in pillar sizes to enhance the sta-bility of the pillars.

Novel delay-distribution-dependent stability analysis for continuous-time recurrent neural networks with stochastic delay

In this paper, the problem of delay-distribution-dependent stability is investigated for continuous-time recurrent neural networks （CRNNs） with stochastic delay. Different from the common assumptions on time delays, it is assumed that the probability distribution of the delay taking values in some intervals is known a priori. By making full use of the information concerning the probability distribution of the delay and by using a tighter bounding technique （the reciprocally convex combination method）, less conservative asymptotic mean-square stable sufficient conditions are derived in terms of linear matrix inequalities （LMIs）. Two numerical examples show that our results are better than the existing ones.

Genetic variability and divergence studies in pod and seed traits of Pongamia pinnata(L.) Pierre., accessions in Bay Islands

In this study, we assessed the variability in pod, seed traits and oil content of 24 accessions of Pongamia pinnata collected from different parts of the Andaman and Nicobar Islands, India. The experiment was conducted at the Central Agricultural Research Institute, Port Blair during 2010 to 2011. The variability studies for pod and seed traits revealed that, the accession CPT-6 collected from New Wandoor in South Andaman recorded the maximum values for eight traits viz. pod length （75.51 mm）, pod width （34.62 mm）, pod thickness （17.55 mm）, 100 pod weight （770.33 g）, seed width （21.23 mm）, 100 seed weight （377.00 g）, oil percentage （43.92%） and germination percentage （94.7%）. However, the maximum seed length （26.46 mm） was recorded from CPT 2 and the maximum pod-seed ratio was obtained from CPT 13 and CPT 4 （2.50 and 2.44 respectively）. The phenotypic and genotypic coefficients of variations were also close to each other for all traits, but the 100 pod and seed weight exhibited higher phenotypic and genotypic coefficient of variation than the other traits. Estimates of broad sense heritability ranged from 0.30 （for seed length） to 0.95 （pod length） and genetic ad- vance as percent of the mean ranged between 11.66% and 57.40% with seed length giving the lowest value and 100 pod weight giving the high- est value. Both the phenotypic and genotypic correlation between pod length, pod width, pod thickness, 100 pod weight, seed width and 100 seed weight and between pod thickness, 100 pod weight, seed width, 100 seed weight and germination percentage were found to be strong. On the basis of non hierarchical Euclidian cluster analysis, 24 accessions were grouped into six clusters. The maximum numbers of seven accessions were included in cluster VI. The maximum intra cluster distance （10.238）shown by cluster VI and the maximum inter cluster distance （17.021） between V and HI followed by III and II （15.942）. Among the six clus- ters formed the cluster III recorded maximum oil percentage, 100 pod weight, 100 seed ,weight, pod length, pod thickness, pod width, seed width and. germination percentage, while cluster V recorded maximum pod seed ratio and germination percentage. The present findings suggest that the crossing between accessions of cluster V and cluster III will result in a wide spectrum of variability in subsequent generations.

Lateral dynamic flight stability of hovering insects: theory vs. numerical simulation

In the present paper, the lateral dynamic flight stability properties of two hovering model insects are predicted by an approximate theory based on the averaged model, and computed by numerical simulation that solves the complete equations of motion coupled with the Naviertokes equations. Comparison between the theoretical and simulational results provides a test to the validity of the assumptions made in the theory. One of the insects is a model dronefly which has relatively high wingbeat frequency （164Hz） and the other is a model hawkmoth which has relatively low wingbeat frequency （26 Hz）. The following conclusion has been drawn. The theory based on the averaged model works well for the lateral motion of the dronefly. For the hawkmoth, relatively large quantitative differences exist between theory and simulation. This is because the lateral non-dimensional eigenvalues of the hawkmoth are not very small compared with the non-dimensional flapping frequency （the largest lateral non-dimensional eigenvalue is only about 10% smaller than the non-dimensional flapping frequency）. Nevertheless, the theory can still correctly predict variational trends of the dynamic properties of the hawkmoth＇s lateral motion.

Comparative Study on Shearing Edge Quality Influence of the Change of Tool Geometry in Fine-Blanking for Non-homogeneous Materials

Excellent quality of shearing edge implies that a s mo oth cutting edge without tearing will be observed on the whole edge surface. Thi s is one of the most significant features of the Fine-blanking process. To achi eve such a superb blanking edge quality in fine-blanking, there actually involv es quite a large number of factors, such as blanking speed, processing material, product shape, lubrication and tool geometry, to be considered simultaneously d uring the operation. Nevertheless, the thorough investigations on different effe cts of those critical factors for different kinds of popular and applicable mate rial are rare and limited. Thus, the objective of this paper is mainly focused o n the study of the quality influence of tool geometry change in fine-blanking f or non-homogeneous materials. However, the most obvious change of the tool geo metry during the operation will be the essential variation of the nose radius of the punch. This is because the nose radius usually seriously deteriorates with the increasing service period in mass production which eventually causes the ent irely lose of the specific features of the fine-blanking process. Therefore, a tailor-made experimental study was carried out to investigate the relationship between the punch nose radius and the shearing edge quality, such as blanked edg e finish, burr height and die-roll height, during fine-blanking for different types of material. Five punches with each specified nose radius (Rp), 0.00 mm, 0.25 mm, 0.50 mm, 0.75 mm and 1.00 mm, and four kinds of blanking material ( Mil d steel SS400, Stainless steel AISI316L, Copper alloy UNSC16200 and Aluminium al loy AA6063 ) were employed throughout the study. Subsequently, features of the s heared edge surfaces and data of each experiment were observed and captured for further analysis in this research. Consequently, findings show that an increase of punch nose radius would produce a higher percentage of fracture of blanked ed ge and increase the amount of burr height. In overall comparison, it is found th at mild steel and copper alloy do provide better surface edge finish with higher percentage of sheared area and less burr height than that of stainless steel an d aluminium alloy.

DNA Binding and Antitumor Activity of a New Fluores cent ProbeEu(Ⅲ)-Complex Containing 4-Methyl-Coumarin Moiety

A new europium(Ⅲ)complex containing(4-Methyl-2-oxo-2 H-chromen-7-yloxy)-acetic acid moiety(CMMC)was synthesized,characterized,and confirmed as antitumor agent and fluorescent probe.The spectroscopic measurements of Eu(Ⅲ)in the presence of CMMC were obtained in different solvents.The results show that the strongest Eu(Ⅲ)emission bands were monitored in iso-propyl alcohol while the weakest Eu(Ⅲ)emission band was observed in acetonitrile.The interaction of Eu(Ⅲ)-(CMMC)2 complex with DNA was monitored using absorption and emission techniques.From fluorescence titration measurements,the binding constants of DNA with Eu(Ⅲ)-(CMMC)_2 complex were found to be 1.04×10~5 L·mol^(-1) in Tris-HCl and 1.17×10~7 L·mol^(-1) in DMSO-Tris-HCl buffer(9∶1 V/V).Hypochromism was observed from the absorption titration experiment which indicates the intercalation of Eu(Ⅲ)-complex between the base pair of DNA.This result further confirmed by fluorescent Ethidium bromide displacement assay.The fluorescence calibration curve was used for the determination of DNA with LOD of 1.2 ng in DMSO-Tris-HCl buffer(9∶1 V/V)and 5 ng in Tris-HCl buffer.The preliminary antitumor investigation shows promising cytotoxicity against MDA-MB-231,MCF-7(mammary cancer),and PC-3(prostate carcinoma)cell lines with IC50 values of 40.63,25.42 and 30.25μmol·L^(-1),respectively.

DENSITY PROPERTIES OF MAPPING SPACES FOR OPERATOR SPACES

In this article, we give the sufficient and necessary conditions for which several important mapping spaces are weak＊ dense in the corresponding completely bound mapping spaces.

Effect of Astragalus Injection Combined with Chemotherapy on Qual ity of Life in Patients with Advanced Non-small Cell Lung Cancer

Objective: To observe the effect of Astragalus injection (AI) combined with chemotherapy on quality of life (QOF) in patients with advanced non-small cell lung caner (NSCLC). Methods: Sixty NSCLC patients were randomly divided into the treated group (n=30,treated with AI combined with chemotherapy) and the control group (n=30, treated with chemotherapy alone). Chemotherapy of MVP protocol was applied to both groups. AI was supplemented to the treated group by intravenous dripping 60 ml per day. Treatment of 21-28 days consisted one treatment cycle, and 2-3 cycles were applied. WResults: The effective rate in the treated group was 40.0% and in the control group was 36.7%, the mean remission rate in them being 5.4 month s and 3.3 months, the median survival period 11 month and 7 month and the 1-year survival rate 46.75% and 30.0%, respectively, the difference of these indexes between the two groups were all significant (P<0 05). Moreover, the clinical improving rate and QOF elevation rate in the treated group was 80.4% and 43.3%, as compared with those in the control group (50.0% and 23.3% respectively), the different was also significant (P<0 01). Conclusion: AI combined with chemotherapy can significantly improve the QOF in NSCLC patients of advanced stage.

Factors Influencing the Successful Adoption of Human Resource Information System: The Content of Aqaba Special Economic Zone Authority

This study examines the key factors that have impact on the successful adoption of Human Resource Information System (HRIS) within the Aqaba Special Economic Zone Authority (ASEZA)/Jordan. In order to accomplish the purpose of the study four critical factors are inquired. So, four critical factors are inquired: First, TAM Model (Perceived Ease of Use (PEOU) and Perceived Usefulness (PU)). Second, Information Technology Infrastructure (ITI). Third, Top Management Support (TMS). Finally, Individual Experience with Computer (IEC). The research model was applied to collect data from the questionnaires answered by 45 users of HRIS as a source of primary data, based on a convenience sample the response rate was about 91%. In addition, the results were analyzed by utilizing the Statistical Package for Social Software (SPSS). Furthermore, the findings were analyzed;multiple Regression analysis indicated that all research variables have significant relationship on successful adoption of HRIS. The findings indicated IT infrastructures have a positive and significant effect on the successful adoption of HRIS. But there is no significant of PU, PEOU, TMS, and IEC on the successful adoption of HRIS. Finally, the results indicated that no significant statistical differences of demographic characteristics on HRIS adoption. Depending on the research’s findings;the researchers proposed a set of recommendations for better adoption of HRIS in SEZA.

Simulation of the Hydrodynamic Functioning of the Cavally River Using a Coupled 1D-2D Model in the Ity Area (Zouan-Hounien in Côte d’Ivoire)

In recent years, the Cavally River has been subject to multiple activities, including the construction of diversion channels and a bridge that makes it vulnerable to flooding. In order to assess the impact of these hydraulic structures on the river hydrodynamic functioning, a 1D-2D model was realized. The implementation of the 1D-2D model consisted of first running the 1D model, then the 2D model, and finally in coupling them. The 1D-2D model was designed with the 1988 flood hydrograph, a Manning’s coefficient of 0.052 m1/3/s for the minor bed and 0.06 m1/3/s for the major bed. The results of the hydraulic model show that the velocities are almost identical to those of the Cavally in natural operation. The values of the velocities are included between 0.4 m/s and 1.3 m/s at the level of the minor bed of the river and between 0.06 m/s and 0.71 m/s at the level of the floodplains. The average water level for flood propagation is 262.37 ± 0.44 m before construction of the structures and 262.23 ± 0.85 m after construction of the structures. The 0.41 m reduction in water level due to the diversion canal and bridge is negligible compared to the total fluctuations of the Cavally River, which vary from 6 to 7 m over the year.

涤纶ITY72dtex/48f两种生产方法的装置设备和工艺探讨

涤纶ITY异收缩丝有两种常见的生产方法,本文以ITY72dtex/48f实际生产为例,分别讨论两种生产方法的装置设备和工艺特点。

FAULT DIAGNOSIS EXPERT SYSTEM FOR ROTATING MACHINERY BASED ON A FUZZY PROBABILITY LOGIC INFERENCE MODEL

A new theory- the fuzzy probability logic theory is presented , This theory incorpo- rates the genterally-used fuzzy logic and the traditionally-used probability logic theory in attempt to emulate the rational fault diagnosis under uncertainty. According to the theory , an inference model , named as FSL , is thus designed to be devoted to the building of a fault diagnosis expert system for rotating machinery (ROSLES) . The system is put into operation on a vibration simula- tor stand for 300 MW turbine generator set ( 1 : 1 0) and satisfactory results are gained.

RISK LEVEL ANALYSIS ON THE PREVENTIVE EROSION CAPACITY OF BRIDGES

Deficiency of the Preventive Erosion Capacity (PEC) of a bridge pier is the main factor leading to bridge fai lures. In this paper, the PEC of bridge piers was analyzed using the stochastic analysis method. The definitions of the reliability and risk level of a bridge p ier subjected to water erosion were proposed and a computational model for erosi on depth and risk level in was suggested.

Chinese SPRIGT realizes high temperature stability in the range of 5–25 K

The unit of thermodynamic temperature,the kelvin,is one of the seven base units of International System of Units.High accuracy measurements of thermodynamic temperature in the lowtemperature range,namely below the neon triple point at24.5561 K,are of strategic significance for the development of

Study of ionizable drugs transfer across the water／1,2-dichloroethane interface with phase volume ratio equal to unity using a three-electrode system

The electrochemical behavior of ionizable drugs (Amitriptyline, Diphenhydramine and Trihexyphene- dyl) at the water/1,2-dichloroethane interface with the phase volume ratio (r = Vo/Vw) equal to 1 are investigated by cyclic voltammetry. The system is composed of an aqueous droplet supported at an Ag/AgCl disk electrode and it was covered with an organic solution. In this manner, a conventional three-electrode potentiostat can be used to study the ionizable drugs transfer process at a liquid/liquid interface. Physicochemical parameters such as the formal transfer potential, the Gibbs energy of transfer and the standard partition coefficients of the ionized forms of these drugs can be evaluated from cyclic voltammograms obtained. The obtained results have been summarized in ionic partition diagrams, which are a useful tool for predicting and interpreting the transfer mechanisms of ionizable drugs at the liquid/liquid interfaces and biological membranes.

超小剂量FⅧ诱导血友病A伴FⅧ抑制物患者免疫耐受8例临床观察

目的探讨血友病A伴抑制物患者免疫耐受诱导(ITI)的方法,尝试寻找适合我国患者的治疗方案。方法对中型/重型血友病A患者用APTT标准曲线一期法测定凝血因子Ⅷ(FⅧ)活性(FⅧ:C),用Bethesda法定量测定FⅧ抗体;抑制物滴度>0.6 BU/mL的患者停用FⅧ制剂,待FⅧ抑制物阴性(<0.6 BU/mL)后用超小剂量FⅧ(初始剂量1~2.5IU·kg^(-1)·d^(-1))联合地塞米松±利妥昔单抗进行ITI治疗。结果8例伴FⅧ抑制物患者,3例患者获得完全耐受,2例患者达到部分耐受,3例诱导失败患者转为传统剂量FⅧ(50 IU/kg,隔天1次)ITI治疗,获得完全耐受。结论使用超小剂量FⅧ进行ITI治疗的有效率可达62.5%,该治疗方案具有一定的社会及经济价值。

“It Could Have Been Said!”—On the Dialogical Space Between Machery and Deleuze

This paper aims to parallelize the theorizations of Pierre Macherey and Gilles Deleuze.First,the author,according to Macherey,must have left something unsaid in his text.The unsaid or the narrative rupture is responsible for the multiplicity of the voices in the text,enabling the text to exist.Above all,Macherey argues that the unsaid or the narrative rupture emerges from how the author chooses to represent ideology.That is,Macherey’s so-called unsaid or narrative rupture is actually what the author could have said;it is in fact a potentiality embedded in the text.On the other hand,when postulating his virtual(ity)/actual(ity)couplet,Deleuze asserts that the virtual(ity)is actually a potentiality that can be tapped.To be more precise,the virtual(ity)has its own reality,and once actualized,it will be transformed into something entirely new and different.Here,the dialogical space between Macherey and Deleuze is plain to see:Macherey’s so-called unsaid or narrative rupture is literally Deleuze’s so-called virtuality.When the unsaid is said,a virtuality is actualized.And a potentiality is thus tapped.By such a reading strategy,we readers are presented with an enactment of an alternative case scenario of the text,namely,how the text could have been made over.In the end,an example of this reading strategy is provided:Macherey argues that Marquis de Sade’s desire-ruled society is more oppressive.What de Sade has left unsaid is the problematic relationship between desire and oppression.And it is exactly the potentiality in his works.