Research on the cutting thermodynamic behavior of high-strength large-thickness offshore jack-up platform leg rack

The cutting of offshore jack-up platform leg rack is highly nonlinear and complex thermal processing process. The residual stress influences the following welding quality and cause crack growth. Therefore, research on the cutting practice of jack-up platform leg rack is significant to improve the safety and reliability of the offshore platform. A heating source model that is applicable to the cutting and emulation of high-strength thick plates han been presented. Then, the thermo-physical characteristic parameters of NV E690 leg plate was calculated by JMATPRO, and is revised according to the theory of metallographic. Furthermore, the numerical simulation of the linear cutting of leg plate was conducted, and the reliability of the heating source model and the thermo-physical characteristic parameters of material were proved by comparing them with the experimental data. Bused on the former study, the optimal parameter （ heating source, cutting speed and radius of the heating source model） which ensured that the gear plate was cut through without edge collapses during cutting was calculated. The optimized process parameters can be used to study the distribution of residual stress in gear plate during cutting which provides theoretical guideline for improving the construction technology of offshore platform legs.

Collision Analysis Between Spudcan and Seabed During the Process of Jack-up Platform Lowering Jack-up Legs

In the leg-lowering process,the offshore jack-up platform is in a floating state,and the spudcan may collide with the seabed due to the platform motion in waves,thereby threatening the safety and stability of the platform.This paper first analyzed the hydrodynamic response of a jack-up platform under different sea states.Then a finite-element model was established which considered the material and geometrical nonlinearity in the structure and the nonlinear interaction between soil and structure to investigate the collision response between the spudcan and seabed during lowering jack-up legs.The results show that the dynamic response of the platform decreases and gradually tends to be stable as the wave period increases.The motion response of the platform reach the largest value when the wave period is 8 s and the wave direction is 0°.The collision angle between the spudcan and seabed has a large influence on the collision response,while the velocity of leg-lowering has little influence on the collision response.The collision response is also significantly affected by soil conditions.For clay,the increase in undrained shear strength and Young’s modulus will increase the impact force.

Dynamic Analysis of Tension Leg Platform for Offshore Wind Turbine Support as Fluid-Structure Interaction

Tension leg platform （TLP） for offshore wind turbine support is a new type structure in wind energy utilization. The strong-interaction method is used in analyzing the coupled model, and the dynamic characteristics of the TLP for offshore wind turbine support are recognized. As shown by the calculated results： for the lower modes, the shapes are water＇s vibration, and the vibration of water induces the structure＇s swing; the mode shapes of the structure are complex, and can largely change among different members; the mode shapes of the platform are related to the tower＇s. The frequencies of the structure do not change much after adjusting the length of the tension cables and the depth of the platform; the TLP has good adaptability for the water depths and the environment loads. The change of the size and parameters of TLP can improve the dynamic characteristics, which can reduce the vibration of the TLP caused by the loads. Through the vibration analysis, the natural vibration frequencies of TLP can be distinguished from the frequencies of condition loads, and thus the resonance vibration can be avoided, therefore the offshore wind turbine can work normally in the complex conditions.

Comprehensive study on the results of tension leg platform responses in random sea

Compliant offshore structures are used for oil exploitation in deep water. Tension leg platform (TLP) is a suitable type for very deep water. The nonlinear dynamic response of TLP under random sea wave load is necessary for determining the maximum deformations and stresses. Accurate and reliable responses are needed for optimum design and control of the structure. In this paper nonlinear dynamic analysis of TLP is carried out in both time and frequency domains. The time history of random wave is generated based on Pierson-Moskowitz spectrum and acts on the structure in arbitrary direction. The hydrodynamic forces are calculated using the modified Morison equation according to Airy’s linear wave theory. The power spectral densities (PSDs) of displacements, velocities and accelerations are calculated from nonlinear responses. The focus of the paper is on the comprehen-sive interpretation of the responses of the structure related to wave excitation and structural characteristics. As an example a case study is investigated and numerical results are discussed.

Parametric Study on the Behavior of An Innovative Subsurface Tension Leg Platform in Ultra-Deep Water

This study focuses on a new technology of Subsurface Tension Leg Platform （STLP）, which utilizes the shallow- water rated well completion equipment and technology for the development of large oil and gas fields in ultra-deep water （UDW）. Thus, the STLP concept offers attractive advantages over conventional field development concepts. STLP is basically a pre-installed Subsurface Sea-star Platform （SSP）, which supports rigid risers and shallow-water rated well completion equipment. The paper details the results of the parametric study on the behavior of STLP at a water depth of 3000 m. At first, a general description of the STLP configuration and working principle is introduced. Then, the numerical models for the global analysis of the STLP in waves and current are presented. After that, extensive parametric studies are carried out with regarding to SSP/tethers system analysis, global dynamic analysis and riser interference analysis. Critical points are addressed on the mooring pattern and riser arrangement under the influence of ocean current, to ensure that the requirements on SSP stability and riser interference are well satisfied. Finally, conclusions and discussions are made. The results indicate that STLP is a competitive well and riser solution in up to 3000 m water depth for offshore petroleum production.

Parametric Dimensional Analysis on the Structural Response of An Innovative Subsurface Tension Leg Platform in Ultra-Deep Water

The innovative Subsurface Tension Leg Platform(STLP), which is designed to be located below Mean Water Level(M.W.L) to minimize direct wave loading and mitigate the effect of strong surface currents, is considered as a competitive alternative system to support shallow-water rated well completion equipment and rigid risers for large ultra-deep water oil field development. A detailed description of the design philosophy of STLP has been published in the series of papers and patents. Nonetheless, design uncertainties arise as limited understanding of various parameters effects on the structural response of STLP, pertaining to the environmental loading, structural properties and hydrodynamic characteristics. This paper focuses on providing quantitative methodology on how each parameter affects the structural response of STLP, which will facilitate establishing the unique design criteria as regards to STLP. Firstly, the entire list of dimensionless groups of input and output parameters is proposed based on VaschyBuckingham theory. Then, numerical models are built and a series of numerical tests are carried out for validating the obtained dimensionless groups. On this basis, the calculation results of a great quantity of parametric studies on the structural response of STLP are presented and discussed in detail. Further, empirical formulae for predicting STLP response are derived through nonlinear regression analysis. Finally, conclusions and discussions are made. It has been demonstrated that the study provides a methodology for better control of key parameters and lays the foundation for optimal design of STLP. The obtained conclusions also have wide ranging applicability in reference to the engineering design and design analysis aspects of deepwater buoy supporting installations, such as Grouped SLOR or TLR system.

Nonlinear Dynamic Responses of Tension Leg Platform with Slack-Taut Tether

The slack-taut state of tether is a particular adverse circumstance, which may influence the normal operation state of tension leg platform （TLP）. The dynamic responses of TLP with slack-taut tether are studied with consideration of several nonlinear factors introduced by large amplitude motions. The time histories of stresses of tethers of a typical TLP in slack- taut state are given. In addition, the sensitivities of slack to stiffness and mass are investigated by varying the stiffness of tether and mass of TLP. It is found that slack is sensitive to the mass of TLP. The critical curved surfaces （ over which indicates the slack） for the increase of mass are obtained.

Dynamic Analysis Method of Offshore Jack-up Platforms in Regular and Random Waves

A jack-up platform, with its particular structure, showed obvious dynamic characteristics under complex environmental loads in extreme conditions. In this paper, taking a simplified 3-D finite element dynamic model in extreme storm conditions as research object, a transient dynamic analysis method was proposed, which was under both regular and irregular wave loads. The steps of dynamic analysis under extreme conditions were illustrated with an applied case, and the dynamic amplification factor （DAF） was calculated for each response parameter of base shear, overturning moment and hull sway. Finally, the structural response results of dynamic and static were compared and analyzed. The results indicated that the static strength analysis of the Jack-up Platforms was not enough under the dynamic loads including wave and current, further dynamic response analysis considering both computational efficiency and accuracy was necessary.

Application of Tension Leg Platform Combined with Other Systemsin the Development of China Deepwater Oil Fields

The development of deepwater oil fields has reached a new stage with the dramatic increase in water depth and the recent increasing demands of the economic development in the filed. The use of a Tension Leg Platform （TIP） combined with other systems, such as Floating Production Storage and Offloading （FPSO） system, Floating Production Unit （FPU） system, Tender Assisted Drilling （TAD） system, etc., has drawn the industry attention and increased significantly in the past few years. For the areas lacking of pipeline system, the use of TIP（s） combined with FPSO has been chosen to efficiently develop the deepwater fields. The TIP with a Tender Assisted Drilling system significantly reduces the payload of the platform and reduces the investment in the TIP system substantially. This opens the door for many new deepwater field developments to use the tension leg platform. The advantage of the TIP combined with a TAD system is more significant when several TIPs are used for the continuous development of the field. One of the applications for the TIP with a tender assisted drilling system can be in the development of an offshore marginal field. Owing to the increase of water depth, the conventional fixed platform model for the exploration of those fields becomes uneconomical. It also would be too expensive to use a large TIP structure for those marginal fields due to the large amount of initial investment. The TIP system with tender assisted drilling can be used to develop those fields economically. There are many marginal fields in China offshore, especially in shelf areas. The application of this field developing model, combined with the existing field developing experience in China, will open the door for many marginal field developments. This paper will review the application of the combined TIP system through some examples of completed/ongoing projects, and major technical issues encountered in those practices. The potential application of this technology in China deepwater development will be discussed in the end.

Finite Element Analysis of Deformed Legs of Offshore Platform Structures

The element stiffness matrix of the equivalent beam or pipe element of the deformed leg of the platform is derived by the finite element method. The stresses and displacements of some damaged components are calculated, and the numerical solutions agree well with those obtained by the fine mesh finite element method. Finally, as an application of this method, the stresses of some platform structures are calculated and analyzed.

The Calculating Model of Structural Analysis for Jack-Up Rig Legs

The selection or establishment of structural calculating model is a matter of primary importance in structural analysis. By analysing the irrationality of the calculating models used by some research organizations at home and abroad in structural analyses for truss jack-up rig legs, this paper introduces a new calculation model which is more reasonable. This model can simulate better the load situation of a rig reflecting more precisely the effects of the leg loads caused by the spring support of gearboxes of the jacking system and the secondary bending moment raised by hull displacement under extreme conditions. The rig conversion was completed in 1989. In July 1991 the rig safely stood the frontal hitting of Typhoon with the wind speed of 52 m / s, which shows that the checking on the structure is correct.

Nonlinear Random Motion Analysis of A Tension Leg Platform Consider- ing the Set-down Motion of A Floating Body

The dynamic analysis of a Tension Leg Platform （TLP） in random wave is investigated by considering the set-down of a floating body. The nonlinear restoring stiffness is derived with the set-down motion of a floating body and the coupled motion of the tension leg and platform and the differential equations of the motion are established. The study focuses on the influence of the set-down motion on the nonlinear response of the platform. By considering different significant wave heights and currents, motion responses of the platform are calculated and compared. The analysis shows that the set-down motion significantly increases the heave motion with low frequency and the equilibrium position of the heave motion with the set-down motion is much lower than that without set-down motion. The results in this paper indicate that the set-down motion has a major impact on the safety of the platform inproduction operation, and it is also a threat to the strength of tension legs and risers.

Tension leg platform project execution

The first floating platform concept design work for South China Sea is undergoing in DMAR's office now. This tension leg platform has potential to become the first advanced floating production platform project. Project execution is always a challenge for floating system. This paper focuses on the critical elements of project execution for tension leg platform,and studies potential implications to future oil and gas exploration in South China Sea. There are many factors affecting successful execution of floating system project,including technical issues, engineering management,interface management,etc. There are also failure examples of project execution in the industry. The author has participated 28 large detailed projects and has gained extensive experience on floating projects,with ample hands-on project experiences. A detailed tension leg platform project study example and discussions in depth are presented for future project execution in China deepwater development.

Vortex-Induced Vibration of a Tension Leg Platform Tendon:Multi-Mode Limit Cycle Oscillations

This paper studies the application of mathematical models to analyze the vortex-induced vibrations of the tendons of a given TLP along the Indian coastline, by using an analytical approach, using MATLAB. The tendon is subjected to a steady current load, which causes vortex-shedding downstream, leading to cross-flow vibrations. The magnitude of the excitation(lift and drag coefficients) depends on the vortex-shedding frequency. The resulting vibration is studied for possible resonant behavior. The excitation force is quantified empirically, the added mass by potential flow hydrodynamics, and the vibration by normal mode summation method. Non-linear viscous damping of the water is considered. The non-linear oscillations are studied by the phase-plane method, investigating the limit-cycle oscillations. The stable/unstable regions of the dynamic behavior are demarcated. The modal contribution to the total deflection is studied to establish the possibility of resonance of one of the wet modes with the vortex-shedding frequency.

An Approximate Method for the Surge Response of the Tension Leg Platform

The solution for the Duffing equation in a nonlinear vibration problem is studied in this paper. Clearly, in the case of the perturb parameter being a larger value, the traditional perturbation method is no longer valid but the Homotopy Perturbation Method(HPM) is applicable usually.HPM is used to solve the weak and strong nonlinear differential equations for finding the perturbed frequency of the response. The obtained frequencies via HPM and the approximate method have good accordance for weak and strong nonlinear differential equations. Additionally, the calculated responses by use of the approximate method are compared with the responses obtained from the Numerical method in the time history of the response and phase plane.The results represent good accordance between them.

Design of A Bionic Spudcan and Analysis of Penetration and Extraction Performances for Jack-up Platform

The mechanisms of soil structure interaction have drawn much attention in the past years in the installation and operation of jack-up platform. A bionic spudcan produced by biomimetic of egg and snail shell is proposed, and the performance of the penetration and extraction are analyzed by numerical method. The geometric contour of egg and snail shell is measured, and its mathematical model is established respectively. According to the structure of existing spudcan of jack-up platform, three kinds of typical biomimetic spudcan are designed. Furthermore, numerical analysis models of biomimetic spudcan are established respectively to study the soil structure interaction mechanism in the process of penetration and extraction, and contrastive analysis of resistance characteristics are carried out. To conclude, the results show that the biomimetic spudcan facilitates the platform installation, and it is also beneficial to the improvement of the bearing capacity of spudcan.

Soil-Structure Interaction Analysis of Jack-up Platforms Subjected to Monochrome and Irregular Waves

As jack-up platforms have recently been used in deeper and harsher waters, there has been an increasing demand to understand their behaviour more accurately to develop more sophisticated analysis techniques. One of the areas of significant development has been the modelling of spudean performance, where the load-displacement behaviour of the foundation is required to be included in any numerical model of the structure. In this study, beam on nonlinear winkler foundation （BNWF） modeling--which is based on using nonlinear springs and dampers instead of a continuum soil media--is employed for this purpose. A regular monochrome design wave and an irregular wave representing a design sea state are applied to the platform as lateral loading. By using the BNWF model and assuming a granular soil under spudcans, properties such as soil nonlinear behaviour near the structure, contact phenomena at the interface of soil and spudcan （such as uplifting and rocking）, and geometrical nonlinear behaviour of the structure are studied. Results of this study show that inelastic behaviour of the soil causes an increase in the lateral displacement at the hull elevation and permanent unequal settlement in soil below the spudcans, which are increased by decreasing the friction angle of the sandy soil. In fact, spudeans and the underlying soil cause a relative fixity at the platform support, which changes the dynamic response of the structure compared with the case where the structure is assumed to have a fixed support or pinned support. For simulating this behaviour without explicit modelling of soil-structure interaction （SSI）, moment- rotation curves at the end of platform legs, which are dependent on foundation dimensions and soil characteristics, are obtained. These curves can be used in a simplified model of the platform for considering the relative fixity at the soil- foundation interface.

Development and Analysis of a Closed-Chain Wheel-Leg Mobile Platform

Current research concerning legged platforms and wheeled platforms primarily focuses on terrain adaptive capability and speed capability,respectively.Compared with wheeled platforms,legged platforms with a closed-chain mechanism still present deficiencies regarding speed ability.To integrate the advantages of these two types of platforms,a wheel-leg mobile platform with two modes based on a closed-chain mechanism is proposed.First,a closed-chain mechanism that generates a high-knee trajectory in legged mode is designed and analyzed based on kinematic analysis.To improve the platform’s obstacle-surmounting performance,the dimensional parameters of the closedchain mechanism are optimized and the design requirements for the platform’s frame are analyzed.In addition,the particular structure of the leg group is designed to realize transformation between legged mode and wheeled mode.The mobility of the constructed platform is calculated through an obstacle-surmounting probability analysis.The performances of the two motion modes are analyzed and compared by conducting dynamic simulations.Finally,experiments are carried out to verify both the theoretical analyses and the prototype performance.This study proposes a new approach to designing wheel-leg platforms with prominent speed ability and mobility based on a closed-chain mechanism.

Dynamic Stress Analysis of the Leg Joints of Self-Elevating Platform

Since a self-elevating platform often works in water for a long time, the lattice leg is largely influenced by wave and current. The amplitude of leg joint stresses is a very important factor for the fatigue life of the platform. However, there are not many researches having been done on the mechanism and dynamic stress analysis of these leg joints. This paper focuses on the dynamic stress analysis and suppression methods of the leg joints of self-elevating platforms. Firstly, the dynamic stresses of the lattice leg joints are analyzed for a self-elevating platform by use of the 5th-order Stokes wave theory. Secondly, the axial and bending stresses are studied due to their large contributions to total stresses. And then, different joint types are considered and the leg-hull interface stiffness is analyzed for the improvement of the joint dynamic stress amplitude. Finally, some useful conclusions are drawn for the optimization design of the self-elevating platform.

Response Analysis of Tension-Based Tension Leg Platform Under Irregular Waves

Tension Leg Platform（TLP） is a hybrid structure used as oil drilling and production facility within water depths of 1200 m. The extension of this TLP concept to deeper waters is a challenge and warrants for some innovative design concepts. In this paper, a relatively new concept of TLP which is christened as Tension-Based Tension Leg Platform（TBTLP） and patented by Srinivasan（1998） has been chosen for study. Response analysis of TLP with one tension base under irregular waves for three different sea states has been performed using hydrodynamic tool ANSYS？ AQWA？. Results are reported in terms of RAOs, response spectrums for surge, heave and pitch degrees of freedom from which spectral statistics have been obtained. The statistics of TBTLP have been compared with TLPs（without tension base） for two different water depths to highlight the features of the new concept. The effect of viscous damping and loading effects on the RAOs are also investigated.