In this work,a“cyclopentanone-vanillin”strategy was proposed for the preparation of jet fuel range cycloalkanes from lignocellulose-derived ketones and lignin-derived aldehydes via aldol condensation and hydrodeoxyg...In this work,a“cyclopentanone-vanillin”strategy was proposed for the preparation of jet fuel range cycloalkanes from lignocellulose-derived ketones and lignin-derived aldehydes via aldol condensation and hydrodeoxygenation(HDO).Ethanolamine lactate ionic liquid(LAIL)exhibited excellent catalytic activity in the aldol condensation of cyclopentanone and vanillin.Desired mono-condensation and bicondensation products were obtained with yield of 95.2%at 100℃.It is found that the synergy effects between amino group of ethanolamine and hydroxyl group of lactic acid play a key role in the aldol condensation.The condensation products were converted into cycloalkanes by HDO over 5%Pd/Nb_(2)O_(5)catalyst.The density of the obtained HDO products is 0.89 g/cm^(3)and the freezing point is lower than-60℃.These results suggest that the resulted cycloalkanes can be used as additives to improve the density and low-temperature fluidity of the jet fuels.展开更多
Antioxidants addition is believed as a facile and effective way to improve jet fuel thermal oxidation stability.However,amine antioxidants,as one of the most important antioxidants,have not received sufficient attenti...Antioxidants addition is believed as a facile and effective way to improve jet fuel thermal oxidation stability.However,amine antioxidants,as one of the most important antioxidants,have not received sufficient attention in the field of jet fuel autoxidation yet.Herein,the inhibition efficiency and mechanism of decane and exo-tetrahydrodicyclopentadiene(THDCPD)oxidation by di-4-tert-butylphenylamine(diarylamine)was experimentally and theoretically investigated.The results show that diarylamine can significantly inhibit decane oxidation but is less efficient for THDCPD oxidation,which is attributed to the higher energy barrier of retro-carbonyl-ene reaction(rate-determining step)in THDCPD than that in decane during diarylamine regeneration.However,the addition of diarylamine will cause undesirable color change after accelerated oxidation and produce slightly more deposits during high-temperature thermal oxidative stress for both decane and THDCPD.The results provide significant implications for the future design of effective antioxidant additives for high-performance jet fuel.展开更多
Narrow fractions of light gas oils obtained from various upgrading processes of Athabasca oilsands bitumen were investigated as diesel and jet fuels. The relationship among the boiling range, cetane number, smoke poin...Narrow fractions of light gas oils obtained from various upgrading processes of Athabasca oilsands bitumen were investigated as diesel and jet fuels. The relationship among the boiling range, cetane number, smoke point, and other properties such as aromatics content, aniline point, and the sulfur and nitrogen content was also studied. The study reveals that when appropriate processes and distillation boiling ranges are selected, oilsands bitumen can produce diesel and jet fuels that meet stringent environmental regulations and future product specifications. New correlations to predict CN and smoke point were developed as a function of density, boiling ranges by simulated distillation, and mono- and total aromatics by supercritical fluid chromatography. The correlations apply to bitumen-derived middle distillates that have a wide range of boiling points.展开更多
Catalytic hydrodeoxygenation(HDO)of biomass-derived oxy-compounds to advanced hydrocarbon fuels usually requires bifunctional catalysts containing metals and acidic sites.The appropriate tuning of metal and/or acidic ...Catalytic hydrodeoxygenation(HDO)of biomass-derived oxy-compounds to advanced hydrocarbon fuels usually requires bifunctional catalysts containing metals and acidic sites.The appropriate tuning of metal and/or acidic active sites at interfaces of bifunctional catalysts can significantly improve catalyst activity and product selectivity.Here,4-trifuoromethyl salicylic acid(TFMSA),as a hydrothermal stable organic acid,was employed to tailor the bifunctional interface of Ru/γ-Al_(2)O_(3)to enhance the catalytic performance on converting lignin-derived phenols to jet fuel range cycloalkanes.More than 80%phenol was converted into cyclohexane at 230°C for 1 h over Ru/γ-Al_(2)O_(3)modified by TFMSA,which was about three times higher than that over unmodified Ru/γ-Al_(2)O_(3).X-ray diffraction(XRD),Transmission electron microscope(TEM),H2 chemisorption,and energy dispersive X-ray spectroscopy(EDS)elemental mapping results indicated that Ru nanoparticles and TFMSA were well distributed onγ-Al_(2)O_(3),and a nanoscale intimacy between Ru and TFMSA was reached.Meanwhile,Fourier transform infrared spectroscopy after pyridine adsorption(Py-FT-IR)analysis proved that Brønsted acidic sites on the catalytic interfaces of TFMSA modified Ru/γ-Al_(2)O_(3)had been improved.Moreover,the kinetic and density functional theory(DFT)results suggested that the synergistic effects of adjacent Ru nanoparticles and acidic sites were crutial for promoting the rate-limiting conversion step of phenol HDO to cyclohexane.展开更多
Long-chain alcohols were considered to be promising alternative fuels and fuel additives. This study was aimed at figuring out the influences of blending long-chain alcohols with jet fuel on the macroscopic spray char...Long-chain alcohols were considered to be promising alternative fuels and fuel additives. This study was aimed at figuring out the influences of blending long-chain alcohols with jet fuel on the macroscopic spray characteristic. n-Butanol and n-pentanol were chosen as tested alternative fuels. A common-rail injection system was used to create high-pressure injection conditions. The Schlieren imaging system was used to capture spray processes. Results showed that with the addition of long-chain alcohols, the spray tip penetration and the peak spray tip velocity increased, whereas the spray cone angle and the spray area decreased. Comparisons between those macroscopic spray characteristics of AKB blends and AKP blends were also conducted. Compared to AKB blends, AKP blends showed similar spray tip penetration, larger peak tip velocity, smaller spray cone angle, and smaller spray area.展开更多
A new route was developed for the synthesis of renewable decalin with cyclopentanone which can be derived from lignocellulose.It was found that 1,2,3,4,5,6,7,8-octahydronaphthalene could be selectively produced by the...A new route was developed for the synthesis of renewable decalin with cyclopentanone which can be derived from lignocellulose.It was found that 1,2,3,4,5,6,7,8-octahydronaphthalene could be selectively produced by the hydrogenation/dehydration/rearrangement of [1,1-bi(cyclopentylidene)]-2-one(i.e.the selfaldol condensation product of cyclopentanone) over a dual-bed catalyst system.Among the investigated catalysts,the Ru/C and Amberlyst-15 resin exhibited the highest activities for the hydrogenation of [1,1-bi(cyclopentylidene)]-2-one to [1,1-bi(cyclopentan)]-2-ol and the dehydration/rearrangement of [1,1-bi(cyclopentan)]-2-ol to 1,2,3,4,5,6,7,8-octahydronaphthalene,respectively.Using Ru/C and Amberlyst-15 resin as the first bed and the second bed catalysts,1,2,3,4,5,6,7,8-octahydronaphthalene was directly produced in high carbon yield(83.7%) under mild conditions(393 K,1 MPa).After being hydrogenated,the1,2,3,4,5,6,7,8-octahydronaphthalene was converted to decalin which can be used as additive to improve the thermal stability and volumetric heat value of jet fuel.展开更多
Since the 1990 s, the kerosene fuel(code: JP-8) had been applied in the ground equipment provided with direct injection compression ignition engines in the U.S. Army, resulting in increased occurrence of injection pum...Since the 1990 s, the kerosene fuel(code: JP-8) had been applied in the ground equipment provided with direct injection compression ignition engines in the U.S. Army, resulting in increased occurrence of injection pump failures. Anti-wear additives must be used in the single fuel due to its poor lubricity. In the present work, lubricity improvers were selected on the basis of molecular simulation theoretically and these agents were evaluated to improve the lubricity of jet fuel using the high frequency reciprocating rig(HFRR) apparatus and the ball-on-cylinder lubricity evaluator(BOCLE). It was revealed that dimer acid with higher value of adsorption energy on the Fe(110) plane surface had more efficient lubricity promoting properties than that of naphthenic acid. The experimental results suggested that the dimer acid had a better tribological behavior compared with that of naphthenic acid used as lubricity improver of jet fuel. And addition of anti-wear additives at a dosage of 15 μg/g was able to promote the lubricity of jet fuel to a required level on BOCLE, while a higher concentration over 80 μg/g was needed to improve the lubricity to a demanded value of diesel on HFRR.展开更多
The combustion characteristics and emission behaviors of RP-3 jet fuel were studied and compared to commercial diesel fuel in a single-cylinder compression ignition(CI)engine.Engine operational parameters,including en...The combustion characteristics and emission behaviors of RP-3 jet fuel were studied and compared to commercial diesel fuel in a single-cylinder compression ignition(CI)engine.Engine operational parameters,including engine load(0.6,0.7,and 0.8 MPa indicating the mean effective pressure(IMEP)),the exhaust gas recirculation(EGR)rate(0%,10%,20%,and 30%),and the fuel injection timing(–20,–15,–10,and–5°crank angle(CA)after top dead center(ATDC))were adjusted to evaluate the engine performances of RP-3 jet fuel under changed operation conditions.In comparison to diesel fuel,RP-3 jet fuel shows a retarded heat release and lagged combustion phase,which is more obvious under heavy EGR rate conditions.In addition,the higher premixed combustion fraction of RP-3 jet fuel leads to a higher first-stage heat release peak than diesel fuel under all testing conditions.As a result,RP-3 jet fuel features a longer ignition delay(ID)time,a shorter combustion duration(CD),and an earlier CA50 than diesel fuel.The experimental results manifest that RP-3 jet fuel has a slightly lower indicated thermal efficiency(ITE)compared to diesel fuel,but the ITE difference becomes less noticeable under large EGR rate conditions.Compared with diesel fuel,the nitrogen oxides(NOx)emissions of RP-3 jet fuel are higher while its soot emissions are lower.The NOx emissions of RP-3 can be effectively reduced with the increased EGR rate and delayed injection timing.展开更多
Spray experiments of RP-3 jet fuel at non-evaporating and evaporating environments were studied on a constant volume spray chamber,and diffusive back-imaging technique was used to capture the transient spray developme...Spray experiments of RP-3 jet fuel at non-evaporating and evaporating environments were studied on a constant volume spray chamber,and diffusive back-imaging technique was used to capture the transient spray development processes.Spray tip penetration,projected spray area and cone angle of RP-3 jet fuel were derived from the spray development images,and compared to those of diesel fuel.It is observed that non-evaporating sprays of RP-3 jet fuel and diesel fuel do not exhibit significant differences,as their spray penetration distances,projected spray areas and spray cone angles are consistent at most test conditions.The evaporating sprays of RP-3 jet fuel produce shorter liquid-phase penetration distances and lower projected spray areas than those of diesel fuel,and these differences are particularly pronounced at low ambient temperatures.However,fuel effects on the evaporating spray cone angle are insignificant.Further,increased ambient density or ambient temperature shortens the liquid-phase spray penetration distance and reduces the liquid-phase spray area,and these effects are more pronounced for diesel fuel than RP-3 jet fuel.展开更多
Jet fuel is widely used in air transportation,and sometimes for special vehicles in ground transportation.In the latter case,fuel spray auto-ignition behavior is an important index for engine operation reliability.Sur...Jet fuel is widely used in air transportation,and sometimes for special vehicles in ground transportation.In the latter case,fuel spray auto-ignition behavior is an important index for engine operation reliability.Surrogate fuel is usually used for fundamental combustion study due to the complex composition of practical fuels.As for jet fuels,two-component or three-component surrogate is usually selected to emulate practical fuels.The spray auto-ignition characteristics of RP-3 jet fuel and its three surrogates,the 70%mol n-decane/30%mol 1,2,4-trimethylbenzene blend(Surrogate 1),the 51%mol n-decane/49%mol 1,2,4-trimethylbenzene blend(Surrogate 2),and the 49.8%mol n-dodecane/21.6%mol iso-cetane/28.6%mol toluene blend(Surrogate 3)were studied in a heated constant volume combustion chamber.Surrogate 1 and Surrogate 2 possess the same components,but their blending percentages are different,as the two surrogates were designed to capture the H/C ratio(Surrogate 1)and DCN(Surrogate 2)of RP-3 jet fuel,respectively.Surrogate 3 could emulate more physiochemical properties of RP-3 jet fuel,including molecular weight,H/C ratio and DCN.Experimental results indicate that Surrogate 1 overestimates the auto-ignition propensity of RP-3 jet fuel,whereas Surrogates 2 and 3 show quite similar auto-ignition propensity with RP-3 jet fuel.Therefore,to capture the spray auto-ignition behaviors,DCN is the most important parameter to match when designing the surrogate formulation.However,as the ambient temperature changes,the surrogates matching DCN may still show some differences from the RP-3 jet fuel,e.g.,the first-stage heat release influenced by low-temperature chemistry.展开更多
Continuous-flow reactor experiments were carried out to study coke formation from thermal crack-ing of home-made jet fuel RP-3 under supercritical con-ditions.The mechanism and precursor of coke forming were analyzed....Continuous-flow reactor experiments were carried out to study coke formation from thermal crack-ing of home-made jet fuel RP-3 under supercritical con-ditions.The mechanism and precursor of coke forming were analyzed.The starting cracking temperature of RP-3 fuel was determined to be 471.8uC by differential scan-ning calorimetry(DSC).Temperature-programmed oxidation and scanning electron microscopy(SEM)characterizations of the stressed tubes showed that there are three different coke species including chemisorbed carbon,amorphous carbon and filamentous coke in the solid deposits.More than 90%of coke deposits are carried away by the supercritical fluid,which has strong capabilities of extraction for coke deposits and their pre-cursors.There were 17.1 wt-%of iron and 11.1 wt-%of chromium found on the coke surface detected by energy dispersive spectroscopy(EDS)which suggests carbure-tion on alloy.RP-3 fuel and its cracking liquids were analyzed by GC-MS,which showed that the content of alkyl benzene and alkyl naphthalene increased evidently in cracking liquids.展开更多
A high thermal-stable jet fuel design method was developed using composition-properties relations and basic specification properties of jet fuel. Tannery diagrams were provided to visualize relationships among three m...A high thermal-stable jet fuel design method was developed using composition-properties relations and basic specification properties of jet fuel. Tannery diagrams were provided to visualize relationships among three main components (n-paraffins, iso-paraffins, cycloparaffins, or aromatics) with four major specification properties (density, flash point, freezing point, net heat of combustion) and thermal sta- bility. An optimum chemical composition was established to meet performance requirements: n-paraffins 25%-45%, iso-paraffins 15%-30%, cycloparaffins 30%-50%, and aromatics 5%. The thermal stability test on four fuel samples with and without optimal composition indicated that the thermal stabilities of fuel samples with optimal composition are higher than RP-3 jet fuel, and that the theoretical design method is a reliable method to screen the basic oil for the high thermal-stable jet fuel.展开更多
Based on a current coherent jet,this study proposes a supersonic combustion(SC)coherent jet in which the main oxygen jet is surrounded by a supersonic fuel gas.The characteristics of the proposed coherent jet are anal...Based on a current coherent jet,this study proposes a supersonic combustion(SC)coherent jet in which the main oxygen jet is surrounded by a supersonic fuel gas.The characteristics of the proposed coherent jet are analyzed using experimental methods and numerical simulations in the high-temperature environment of electric arc furnace(EAF)steelmaking.The SC coherent jet achieved stable combustion in the EAF steelmaking environment.The simulated combustion temperature of the supersonic shrouding methane gas was 2930 K,slightly below the theoretical combustion temperature of methane–oxygen gas.The high speed and temperature of the supersonic flame effectively weakened the interaction between the main oxygen jet and the external ambient gas,inhibiting the radial expansion of the main oxygen jet and maintaining its high speed and low turbulence over a long distance.These features improved the impact capacity of the coherent jet and strengthened the stirring intensity in the EAF bath.展开更多
基金funded by grants from the National Natural Science Foundation of China(No.52236010,51876210)the Fundamental Research Funds for the Central Universities(No.2242022R10058)。
文摘In this work,a“cyclopentanone-vanillin”strategy was proposed for the preparation of jet fuel range cycloalkanes from lignocellulose-derived ketones and lignin-derived aldehydes via aldol condensation and hydrodeoxygenation(HDO).Ethanolamine lactate ionic liquid(LAIL)exhibited excellent catalytic activity in the aldol condensation of cyclopentanone and vanillin.Desired mono-condensation and bicondensation products were obtained with yield of 95.2%at 100℃.It is found that the synergy effects between amino group of ethanolamine and hydroxyl group of lactic acid play a key role in the aldol condensation.The condensation products were converted into cycloalkanes by HDO over 5%Pd/Nb_(2)O_(5)catalyst.The density of the obtained HDO products is 0.89 g/cm^(3)and the freezing point is lower than-60℃.These results suggest that the resulted cycloalkanes can be used as additives to improve the density and low-temperature fluidity of the jet fuels.
基金the financial support from the Postdoctoral Science Foundation of China(2021M702810)the Haihe Laboratory of Sustainable Chemical Transformations(CYZC202103)the National Natural Science Foundation of China(21978200 and 22222808)。
文摘Antioxidants addition is believed as a facile and effective way to improve jet fuel thermal oxidation stability.However,amine antioxidants,as one of the most important antioxidants,have not received sufficient attention in the field of jet fuel autoxidation yet.Herein,the inhibition efficiency and mechanism of decane and exo-tetrahydrodicyclopentadiene(THDCPD)oxidation by di-4-tert-butylphenylamine(diarylamine)was experimentally and theoretically investigated.The results show that diarylamine can significantly inhibit decane oxidation but is less efficient for THDCPD oxidation,which is attributed to the higher energy barrier of retro-carbonyl-ene reaction(rate-determining step)in THDCPD than that in decane during diarylamine regeneration.However,the addition of diarylamine will cause undesirable color change after accelerated oxidation and produce slightly more deposits during high-temperature thermal oxidative stress for both decane and THDCPD.The results provide significant implications for the future design of effective antioxidant additives for high-performance jet fuel.
文摘Narrow fractions of light gas oils obtained from various upgrading processes of Athabasca oilsands bitumen were investigated as diesel and jet fuels. The relationship among the boiling range, cetane number, smoke point, and other properties such as aromatics content, aniline point, and the sulfur and nitrogen content was also studied. The study reveals that when appropriate processes and distillation boiling ranges are selected, oilsands bitumen can produce diesel and jet fuels that meet stringent environmental regulations and future product specifications. New correlations to predict CN and smoke point were developed as a function of density, boiling ranges by simulated distillation, and mono- and total aromatics by supercritical fluid chromatography. The correlations apply to bitumen-derived middle distillates that have a wide range of boiling points.
基金supported by the National Key R&D Program of China(2018YFB1501500)the 2115 Talent Development Program of China Agricultural University+3 种基金the National Natural Science Foundation of China(21903001)the Natural Science Foundation of Anhui Province(1908085QB58)the Chinese Universities Scientific Fund(2020TC116)the Research Innovation Fund for Graduate Students of CAU(2020XYZC05A)。
文摘Catalytic hydrodeoxygenation(HDO)of biomass-derived oxy-compounds to advanced hydrocarbon fuels usually requires bifunctional catalysts containing metals and acidic sites.The appropriate tuning of metal and/or acidic active sites at interfaces of bifunctional catalysts can significantly improve catalyst activity and product selectivity.Here,4-trifuoromethyl salicylic acid(TFMSA),as a hydrothermal stable organic acid,was employed to tailor the bifunctional interface of Ru/γ-Al_(2)O_(3)to enhance the catalytic performance on converting lignin-derived phenols to jet fuel range cycloalkanes.More than 80%phenol was converted into cyclohexane at 230°C for 1 h over Ru/γ-Al_(2)O_(3)modified by TFMSA,which was about three times higher than that over unmodified Ru/γ-Al_(2)O_(3).X-ray diffraction(XRD),Transmission electron microscope(TEM),H2 chemisorption,and energy dispersive X-ray spectroscopy(EDS)elemental mapping results indicated that Ru nanoparticles and TFMSA were well distributed onγ-Al_(2)O_(3),and a nanoscale intimacy between Ru and TFMSA was reached.Meanwhile,Fourier transform infrared spectroscopy after pyridine adsorption(Py-FT-IR)analysis proved that Brønsted acidic sites on the catalytic interfaces of TFMSA modified Ru/γ-Al_(2)O_(3)had been improved.Moreover,the kinetic and density functional theory(DFT)results suggested that the synergistic effects of adjacent Ru nanoparticles and acidic sites were crutial for promoting the rate-limiting conversion step of phenol HDO to cyclohexane.
基金supported by the National Natural Science Foundation of China(No.51376171)
文摘Long-chain alcohols were considered to be promising alternative fuels and fuel additives. This study was aimed at figuring out the influences of blending long-chain alcohols with jet fuel on the macroscopic spray characteristic. n-Butanol and n-pentanol were chosen as tested alternative fuels. A common-rail injection system was used to create high-pressure injection conditions. The Schlieren imaging system was used to capture spray processes. Results showed that with the addition of long-chain alcohols, the spray tip penetration and the peak spray tip velocity increased, whereas the spray cone angle and the spray area decreased. Comparisons between those macroscopic spray characteristics of AKB blends and AKP blends were also conducted. Compared to AKB blends, AKP blends showed similar spray tip penetration, larger peak tip velocity, smaller spray cone angle, and smaller spray area.
基金funded by the National Natural Science Foundation of China (nos.21776273 21721004+6 种基金 21690080 21690082)the Strategic Priority Research Program of the Chinese Academy of Sciences (XDB17020100)the National Key Projects for Fundamental Research and Development of China (2016YFA0202801)Dalian Science Foundation for Distinguished Young Scholars (no.2015R005)Department of Science and Technology of Liaoning Province (under contract of 2015020086-101)100-talent project of Dalian Institute of Chemical Physics (DICP)
文摘A new route was developed for the synthesis of renewable decalin with cyclopentanone which can be derived from lignocellulose.It was found that 1,2,3,4,5,6,7,8-octahydronaphthalene could be selectively produced by the hydrogenation/dehydration/rearrangement of [1,1-bi(cyclopentylidene)]-2-one(i.e.the selfaldol condensation product of cyclopentanone) over a dual-bed catalyst system.Among the investigated catalysts,the Ru/C and Amberlyst-15 resin exhibited the highest activities for the hydrogenation of [1,1-bi(cyclopentylidene)]-2-one to [1,1-bi(cyclopentan)]-2-ol and the dehydration/rearrangement of [1,1-bi(cyclopentan)]-2-ol to 1,2,3,4,5,6,7,8-octahydronaphthalene,respectively.Using Ru/C and Amberlyst-15 resin as the first bed and the second bed catalysts,1,2,3,4,5,6,7,8-octahydronaphthalene was directly produced in high carbon yield(83.7%) under mild conditions(393 K,1 MPa).After being hydrogenated,the1,2,3,4,5,6,7,8-octahydronaphthalene was converted to decalin which can be used as additive to improve the thermal stability and volumetric heat value of jet fuel.
文摘Since the 1990 s, the kerosene fuel(code: JP-8) had been applied in the ground equipment provided with direct injection compression ignition engines in the U.S. Army, resulting in increased occurrence of injection pump failures. Anti-wear additives must be used in the single fuel due to its poor lubricity. In the present work, lubricity improvers were selected on the basis of molecular simulation theoretically and these agents were evaluated to improve the lubricity of jet fuel using the high frequency reciprocating rig(HFRR) apparatus and the ball-on-cylinder lubricity evaluator(BOCLE). It was revealed that dimer acid with higher value of adsorption energy on the Fe(110) plane surface had more efficient lubricity promoting properties than that of naphthenic acid. The experimental results suggested that the dimer acid had a better tribological behavior compared with that of naphthenic acid used as lubricity improver of jet fuel. And addition of anti-wear additives at a dosage of 15 μg/g was able to promote the lubricity of jet fuel to a required level on BOCLE, while a higher concentration over 80 μg/g was needed to improve the lubricity to a demanded value of diesel on HFRR.
基金supported by the National Natural Science Foundation of China(Grant Nos.52022058,51776124,51861135303)the Ministry of Education of China(Grant No.6141A020335).
文摘The combustion characteristics and emission behaviors of RP-3 jet fuel were studied and compared to commercial diesel fuel in a single-cylinder compression ignition(CI)engine.Engine operational parameters,including engine load(0.6,0.7,and 0.8 MPa indicating the mean effective pressure(IMEP)),the exhaust gas recirculation(EGR)rate(0%,10%,20%,and 30%),and the fuel injection timing(–20,–15,–10,and–5°crank angle(CA)after top dead center(ATDC))were adjusted to evaluate the engine performances of RP-3 jet fuel under changed operation conditions.In comparison to diesel fuel,RP-3 jet fuel shows a retarded heat release and lagged combustion phase,which is more obvious under heavy EGR rate conditions.In addition,the higher premixed combustion fraction of RP-3 jet fuel leads to a higher first-stage heat release peak than diesel fuel under all testing conditions.As a result,RP-3 jet fuel features a longer ignition delay(ID)time,a shorter combustion duration(CD),and an earlier CA50 than diesel fuel.The experimental results manifest that RP-3 jet fuel has a slightly lower indicated thermal efficiency(ITE)compared to diesel fuel,but the ITE difference becomes less noticeable under large EGR rate conditions.Compared with diesel fuel,the nitrogen oxides(NOx)emissions of RP-3 jet fuel are higher while its soot emissions are lower.The NOx emissions of RP-3 can be effectively reduced with the increased EGR rate and delayed injection timing.
基金supported by National Natural Science Foundation of China(Grant Nos.52022058 and 51776124)by Ministry of Education of China(Grant No.6141A020335)。
文摘Spray experiments of RP-3 jet fuel at non-evaporating and evaporating environments were studied on a constant volume spray chamber,and diffusive back-imaging technique was used to capture the transient spray development processes.Spray tip penetration,projected spray area and cone angle of RP-3 jet fuel were derived from the spray development images,and compared to those of diesel fuel.It is observed that non-evaporating sprays of RP-3 jet fuel and diesel fuel do not exhibit significant differences,as their spray penetration distances,projected spray areas and spray cone angles are consistent at most test conditions.The evaporating sprays of RP-3 jet fuel produce shorter liquid-phase penetration distances and lower projected spray areas than those of diesel fuel,and these differences are particularly pronounced at low ambient temperatures.However,fuel effects on the evaporating spray cone angle are insignificant.Further,increased ambient density or ambient temperature shortens the liquid-phase spray penetration distance and reduces the liquid-phase spray area,and these effects are more pronounced for diesel fuel than RP-3 jet fuel.
基金This research work was supported by the National Natural Science Foundation of China(Grant Nos.51776124 and 51861135303)the Belt and Road International Collaboration Program by Shanghai Science and Technology Committee(Grant No.19160745400).
文摘Jet fuel is widely used in air transportation,and sometimes for special vehicles in ground transportation.In the latter case,fuel spray auto-ignition behavior is an important index for engine operation reliability.Surrogate fuel is usually used for fundamental combustion study due to the complex composition of practical fuels.As for jet fuels,two-component or three-component surrogate is usually selected to emulate practical fuels.The spray auto-ignition characteristics of RP-3 jet fuel and its three surrogates,the 70%mol n-decane/30%mol 1,2,4-trimethylbenzene blend(Surrogate 1),the 51%mol n-decane/49%mol 1,2,4-trimethylbenzene blend(Surrogate 2),and the 49.8%mol n-dodecane/21.6%mol iso-cetane/28.6%mol toluene blend(Surrogate 3)were studied in a heated constant volume combustion chamber.Surrogate 1 and Surrogate 2 possess the same components,but their blending percentages are different,as the two surrogates were designed to capture the H/C ratio(Surrogate 1)and DCN(Surrogate 2)of RP-3 jet fuel,respectively.Surrogate 3 could emulate more physiochemical properties of RP-3 jet fuel,including molecular weight,H/C ratio and DCN.Experimental results indicate that Surrogate 1 overestimates the auto-ignition propensity of RP-3 jet fuel,whereas Surrogates 2 and 3 show quite similar auto-ignition propensity with RP-3 jet fuel.Therefore,to capture the spray auto-ignition behaviors,DCN is the most important parameter to match when designing the surrogate formulation.However,as the ambient temperature changes,the surrogates matching DCN may still show some differences from the RP-3 jet fuel,e.g.,the first-stage heat release influenced by low-temperature chemistry.
文摘Continuous-flow reactor experiments were carried out to study coke formation from thermal crack-ing of home-made jet fuel RP-3 under supercritical con-ditions.The mechanism and precursor of coke forming were analyzed.The starting cracking temperature of RP-3 fuel was determined to be 471.8uC by differential scan-ning calorimetry(DSC).Temperature-programmed oxidation and scanning electron microscopy(SEM)characterizations of the stressed tubes showed that there are three different coke species including chemisorbed carbon,amorphous carbon and filamentous coke in the solid deposits.More than 90%of coke deposits are carried away by the supercritical fluid,which has strong capabilities of extraction for coke deposits and their pre-cursors.There were 17.1 wt-%of iron and 11.1 wt-%of chromium found on the coke surface detected by energy dispersive spectroscopy(EDS)which suggests carbure-tion on alloy.RP-3 fuel and its cracking liquids were analyzed by GC-MS,which showed that the content of alkyl benzene and alkyl naphthalene increased evidently in cracking liquids.
基金National Hi-Tech Research and Development 863 Program of China (No. 2005AA723101)China Postdoctoral Science Foundation (No. 2005AA723101)Innovative Research Project of Petrochina Co. Ltd
文摘A high thermal-stable jet fuel design method was developed using composition-properties relations and basic specification properties of jet fuel. Tannery diagrams were provided to visualize relationships among three main components (n-paraffins, iso-paraffins, cycloparaffins, or aromatics) with four major specification properties (density, flash point, freezing point, net heat of combustion) and thermal sta- bility. An optimum chemical composition was established to meet performance requirements: n-paraffins 25%-45%, iso-paraffins 15%-30%, cycloparaffins 30%-50%, and aromatics 5%. The thermal stability test on four fuel samples with and without optimal composition indicated that the thermal stabilities of fuel samples with optimal composition are higher than RP-3 jet fuel, and that the theoretical design method is a reliable method to screen the basic oil for the high thermal-stable jet fuel.
基金financially supported by Fundamental Research Funds for the Central Universities (No. FRF-GF18-008B)
文摘Based on a current coherent jet,this study proposes a supersonic combustion(SC)coherent jet in which the main oxygen jet is surrounded by a supersonic fuel gas.The characteristics of the proposed coherent jet are analyzed using experimental methods and numerical simulations in the high-temperature environment of electric arc furnace(EAF)steelmaking.The SC coherent jet achieved stable combustion in the EAF steelmaking environment.The simulated combustion temperature of the supersonic shrouding methane gas was 2930 K,slightly below the theoretical combustion temperature of methane–oxygen gas.The high speed and temperature of the supersonic flame effectively weakened the interaction between the main oxygen jet and the external ambient gas,inhibiting the radial expansion of the main oxygen jet and maintaining its high speed and low turbulence over a long distance.These features improved the impact capacity of the coherent jet and strengthened the stirring intensity in the EAF bath.